* [PATCH v2 0/2] General coding style clean up @ 2020-07-22 11:24 ` Rahul Gottipati 0 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:24 UTC (permalink / raw) To: mchehab; +Cc: sakari.ailus, gregkh, linux-media, devel, linux-kernel This patchset fixes several checkpatch.pl warnings in atomisp_ioctl.c that have been distributed across 2 patches logically. Rahul Gottipati (2): media: atomisp: Fix coding style issue - remove beginning whitespaces media: atomisp: Fix coding style issue - correct multiline comments .../staging/media/atomisp/pci/atomisp_ioctl.c | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) -- 2.25.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 0/2] General coding style clean up @ 2020-07-22 11:24 ` Rahul Gottipati 0 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:24 UTC (permalink / raw) To: mchehab; +Cc: devel, gregkh, linux-kernel, sakari.ailus, linux-media This patchset fixes several checkpatch.pl warnings in atomisp_ioctl.c that have been distributed across 2 patches logically. Rahul Gottipati (2): media: atomisp: Fix coding style issue - remove beginning whitespaces media: atomisp: Fix coding style issue - correct multiline comments .../staging/media/atomisp/pci/atomisp_ioctl.c | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) -- 2.25.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/2] media: atomisp: Fix coding style issue - remove beginning whitespaces 2020-07-22 11:24 ` Rahul Gottipati @ 2020-07-22 11:28 ` Rahul Gottipati -1 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:28 UTC (permalink / raw) To: mchehab; +Cc: sakari.ailus, gregkh, linux-media, devel, linux-kernel This removes whitespaces at the beginning of a few lines to fix some checkpatch.pl warnings. Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> --- Changes in v2: Distributed changes across 2 patches instead of the previous 1 drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9404a678fa6f..9cdcbe774229 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -512,7 +512,7 @@ const struct atomisp_format_bridge atomisp_output_fmts[] = { }; const struct atomisp_format_bridge *atomisp_get_format_bridge( - unsigned int pixelformat) + unsigned int pixelformat) { unsigned int i; @@ -525,7 +525,7 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( } const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( - u32 mbus_code) + u32 mbus_code) { unsigned int i; @@ -607,7 +607,7 @@ static int atomisp_enum_input(struct file *file, void *fh, } static unsigned int atomisp_subdev_streaming_count( - struct atomisp_sub_device *asd) + struct atomisp_sub_device *asd) { return asd->video_out_preview.capq.streaming + asd->video_out_capture.capq.streaming -- 2.25.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 1/2] media: atomisp: Fix coding style issue - remove beginning whitespaces @ 2020-07-22 11:28 ` Rahul Gottipati 0 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:28 UTC (permalink / raw) To: mchehab; +Cc: devel, gregkh, linux-kernel, sakari.ailus, linux-media This removes whitespaces at the beginning of a few lines to fix some checkpatch.pl warnings. Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> --- Changes in v2: Distributed changes across 2 patches instead of the previous 1 drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9404a678fa6f..9cdcbe774229 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -512,7 +512,7 @@ const struct atomisp_format_bridge atomisp_output_fmts[] = { }; const struct atomisp_format_bridge *atomisp_get_format_bridge( - unsigned int pixelformat) + unsigned int pixelformat) { unsigned int i; @@ -525,7 +525,7 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( } const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( - u32 mbus_code) + u32 mbus_code) { unsigned int i; @@ -607,7 +607,7 @@ static int atomisp_enum_input(struct file *file, void *fh, } static unsigned int atomisp_subdev_streaming_count( - struct atomisp_sub_device *asd) + struct atomisp_sub_device *asd) { return asd->video_out_preview.capq.streaming + asd->video_out_capture.capq.streaming -- 2.25.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] media: atomisp: Fix coding style issue - remove beginning whitespaces 2020-07-22 11:28 ` Rahul Gottipati @ 2020-07-22 14:03 ` Mauro Carvalho Chehab -1 siblings, 0 replies; 10+ messages in thread From: Mauro Carvalho Chehab @ 2020-07-22 14:03 UTC (permalink / raw) To: Rahul Gottipati; +Cc: sakari.ailus, gregkh, linux-media, devel, linux-kernel Em Wed, 22 Jul 2020 16:58:31 +0530 Rahul Gottipati <rahul.blr97@gmail.com> escreveu: > This removes whitespaces at the beginning of a few lines to fix > some checkpatch.pl warnings. > > Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> > --- > Changes in v2: > Distributed changes across 2 patches instead of the previous 1 > > drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > index 9404a678fa6f..9cdcbe774229 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > @@ -512,7 +512,7 @@ const struct atomisp_format_bridge atomisp_output_fmts[] = { > }; > > const struct atomisp_format_bridge *atomisp_get_format_bridge( > - unsigned int pixelformat) > + unsigned int pixelformat) This is still a coding style violation, as: 1) the continuation line won't be aligned after the open parenthesis; 2) the line will end with an open parenthesis. A fix would be: const struct atomisp_format_bridge * atomisp_get_format_bridge(unsigned int pixelformat) The same applies to similar patterns. Yet, patches to atomisp have a high chance of having conflicts, and being rejected, as we're doing lots of non-aesthetic changes on this driver. > { > unsigned int i; > > @@ -525,7 +525,7 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( > } > > const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( > - u32 mbus_code) > + u32 mbus_code) > { > unsigned int i; > > @@ -607,7 +607,7 @@ static int atomisp_enum_input(struct file *file, void *fh, > } > > static unsigned int atomisp_subdev_streaming_count( > - struct atomisp_sub_device *asd) > + struct atomisp_sub_device *asd) > { > return asd->video_out_preview.capq.streaming > + asd->video_out_capture.capq.streaming Thanks, Mauro ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] media: atomisp: Fix coding style issue - remove beginning whitespaces @ 2020-07-22 14:03 ` Mauro Carvalho Chehab 0 siblings, 0 replies; 10+ messages in thread From: Mauro Carvalho Chehab @ 2020-07-22 14:03 UTC (permalink / raw) To: Rahul Gottipati; +Cc: devel, gregkh, linux-kernel, sakari.ailus, linux-media Em Wed, 22 Jul 2020 16:58:31 +0530 Rahul Gottipati <rahul.blr97@gmail.com> escreveu: > This removes whitespaces at the beginning of a few lines to fix > some checkpatch.pl warnings. > > Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> > --- > Changes in v2: > Distributed changes across 2 patches instead of the previous 1 > > drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > index 9404a678fa6f..9cdcbe774229 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > @@ -512,7 +512,7 @@ const struct atomisp_format_bridge atomisp_output_fmts[] = { > }; > > const struct atomisp_format_bridge *atomisp_get_format_bridge( > - unsigned int pixelformat) > + unsigned int pixelformat) This is still a coding style violation, as: 1) the continuation line won't be aligned after the open parenthesis; 2) the line will end with an open parenthesis. A fix would be: const struct atomisp_format_bridge * atomisp_get_format_bridge(unsigned int pixelformat) The same applies to similar patterns. Yet, patches to atomisp have a high chance of having conflicts, and being rejected, as we're doing lots of non-aesthetic changes on this driver. > { > unsigned int i; > > @@ -525,7 +525,7 @@ const struct atomisp_format_bridge *atomisp_get_format_bridge( > } > > const struct atomisp_format_bridge *atomisp_get_format_bridge_from_mbus( > - u32 mbus_code) > + u32 mbus_code) > { > unsigned int i; > > @@ -607,7 +607,7 @@ static int atomisp_enum_input(struct file *file, void *fh, > } > > static unsigned int atomisp_subdev_streaming_count( > - struct atomisp_sub_device *asd) > + struct atomisp_sub_device *asd) > { > return asd->video_out_preview.capq.streaming > + asd->video_out_capture.capq.streaming Thanks, Mauro _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 2/2] media: atomisp: Fix coding style issue - correct multiline comments 2020-07-22 11:24 ` Rahul Gottipati @ 2020-07-22 11:30 ` Rahul Gottipati -1 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:30 UTC (permalink / raw) To: mchehab; +Cc: sakari.ailus, gregkh, linux-media, devel, linux-kernel This fixes some coding style issues of multiline comments to correct a few checkpatch.pl warnings. Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> --- Changes in v2: Distributed changes across 2 patches instead of the previous 1. drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9cdcbe774229..5bf3a86f98f8 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -1281,7 +1281,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) * But the capture number cannot be determined by HAL. * So HAL only sets the capture number to be 1 and queue multiple * buffers. Atomisp driver needs to check this case and re-trigger - * CSS to do capture when new buffer is queued. */ + * CSS to do capture when new buffer is queued. + */ if (asd->continuous_mode->val && atomisp_subdev_source_pad(vdev) == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE && @@ -1806,7 +1807,7 @@ static int atomisp_streamon(struct file *file, void *fh, /* * set freq to max when streaming count > 1 which indicate * dual camera would run - */ + */ if (atomisp_streaming_count(isp) > 1) { if (atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_MAX, false) < 0) @@ -2438,7 +2439,8 @@ static int atomisp_g_ext_ctrls(struct file *file, void *fh, int i, ret = 0; /* input_lock is not need for the Camera related IOCTLs - * The input_lock downgrade the FPS of 3A*/ + * The input_lock downgrade the FPS of 3A + */ ret = atomisp_camera_g_ext_ctrls(file, fh, c); if (ret != -EINVAL) return ret; @@ -2521,7 +2523,8 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh, v4l2_s_ctrl(NULL, isp->flash->ctrl_handler, &ctrl); /* When flash mode is changed we need to reset - * flash state */ + * flash state + */ if (ctrl.id == V4L2_CID_FLASH_MODE) { asd->params.flash_state = ATOMISP_FLASH_IDLE; @@ -2560,7 +2563,8 @@ static int atomisp_s_ext_ctrls(struct file *file, void *fh, int i, ret = 0; /* input_lock is not need for the Camera related IOCTLs - * The input_lock downgrade the FPS of 3A*/ + * The input_lock downgrade the FPS of 3A + */ ret = atomisp_camera_s_ext_ctrls(file, fh, c); if (ret != -EINVAL) return ret; -- 2.25.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/2] media: atomisp: Fix coding style issue - correct multiline comments @ 2020-07-22 11:30 ` Rahul Gottipati 0 siblings, 0 replies; 10+ messages in thread From: Rahul Gottipati @ 2020-07-22 11:30 UTC (permalink / raw) To: mchehab; +Cc: devel, gregkh, linux-kernel, sakari.ailus, linux-media This fixes some coding style issues of multiline comments to correct a few checkpatch.pl warnings. Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> --- Changes in v2: Distributed changes across 2 patches instead of the previous 1. drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c index 9cdcbe774229..5bf3a86f98f8 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c @@ -1281,7 +1281,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) * But the capture number cannot be determined by HAL. * So HAL only sets the capture number to be 1 and queue multiple * buffers. Atomisp driver needs to check this case and re-trigger - * CSS to do capture when new buffer is queued. */ + * CSS to do capture when new buffer is queued. + */ if (asd->continuous_mode->val && atomisp_subdev_source_pad(vdev) == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE && @@ -1806,7 +1807,7 @@ static int atomisp_streamon(struct file *file, void *fh, /* * set freq to max when streaming count > 1 which indicate * dual camera would run - */ + */ if (atomisp_streaming_count(isp) > 1) { if (atomisp_freq_scaling(isp, ATOMISP_DFS_MODE_MAX, false) < 0) @@ -2438,7 +2439,8 @@ static int atomisp_g_ext_ctrls(struct file *file, void *fh, int i, ret = 0; /* input_lock is not need for the Camera related IOCTLs - * The input_lock downgrade the FPS of 3A*/ + * The input_lock downgrade the FPS of 3A + */ ret = atomisp_camera_g_ext_ctrls(file, fh, c); if (ret != -EINVAL) return ret; @@ -2521,7 +2523,8 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh, v4l2_s_ctrl(NULL, isp->flash->ctrl_handler, &ctrl); /* When flash mode is changed we need to reset - * flash state */ + * flash state + */ if (ctrl.id == V4L2_CID_FLASH_MODE) { asd->params.flash_state = ATOMISP_FLASH_IDLE; @@ -2560,7 +2563,8 @@ static int atomisp_s_ext_ctrls(struct file *file, void *fh, int i, ret = 0; /* input_lock is not need for the Camera related IOCTLs - * The input_lock downgrade the FPS of 3A*/ + * The input_lock downgrade the FPS of 3A + */ ret = atomisp_camera_s_ext_ctrls(file, fh, c); if (ret != -EINVAL) return ret; -- 2.25.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] media: atomisp: Fix coding style issue - correct multiline comments 2020-07-22 11:30 ` Rahul Gottipati @ 2020-07-22 14:05 ` Mauro Carvalho Chehab -1 siblings, 0 replies; 10+ messages in thread From: Mauro Carvalho Chehab @ 2020-07-22 14:05 UTC (permalink / raw) To: Rahul Gottipati; +Cc: sakari.ailus, gregkh, linux-media, devel, linux-kernel Em Wed, 22 Jul 2020 17:00:52 +0530 Rahul Gottipati <rahul.blr97@gmail.com> escreveu: > This fixes some coding style issues of multiline comments to > correct a few checkpatch.pl warnings. > > Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> > --- > Changes in v2: > Distributed changes across 2 patches instead of the previous 1. > drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > index 9cdcbe774229..5bf3a86f98f8 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > @@ -1281,7 +1281,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) > * But the capture number cannot be determined by HAL. > * So HAL only sets the capture number to be 1 and queue multiple > * buffers. Atomisp driver needs to check this case and re-trigger > - * CSS to do capture when new buffer is queued. */ > + * CSS to do capture when new buffer is queued. > + */ > if (asd->continuous_mode->val && > atomisp_subdev_source_pad(vdev) > == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE && > @@ -1806,7 +1807,7 @@ static int atomisp_streamon(struct file *file, void *fh, > /* > * set freq to max when streaming count > 1 which indicate > * dual camera would run > - */ > + */ > if (atomisp_streaming_count(isp) > 1) { > if (atomisp_freq_scaling(isp, > ATOMISP_DFS_MODE_MAX, false) < 0) > @@ -2438,7 +2439,8 @@ static int atomisp_g_ext_ctrls(struct file *file, void *fh, > int i, ret = 0; > > /* input_lock is not need for the Camera related IOCTLs > - * The input_lock downgrade the FPS of 3A*/ > + * The input_lock downgrade the FPS of 3A > + */ On media (and on several subsystems), we keep the first line in blank, on multi-line comments: /* * input_lock is not need for the Camera related IOCTLs * The input_lock downgrade the FPS of 3A */ > ret = atomisp_camera_g_ext_ctrls(file, fh, c); > if (ret != -EINVAL) > return ret; > @@ -2521,7 +2523,8 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh, > v4l2_s_ctrl(NULL, isp->flash->ctrl_handler, > &ctrl); > /* When flash mode is changed we need to reset > - * flash state */ > + * flash state > + */ > if (ctrl.id == V4L2_CID_FLASH_MODE) { > asd->params.flash_state = > ATOMISP_FLASH_IDLE; > @@ -2560,7 +2563,8 @@ static int atomisp_s_ext_ctrls(struct file *file, void *fh, > int i, ret = 0; > > /* input_lock is not need for the Camera related IOCTLs > - * The input_lock downgrade the FPS of 3A*/ > + * The input_lock downgrade the FPS of 3A > + */ > ret = atomisp_camera_s_ext_ctrls(file, fh, c); > if (ret != -EINVAL) > return ret; Thanks, Mauro ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] media: atomisp: Fix coding style issue - correct multiline comments @ 2020-07-22 14:05 ` Mauro Carvalho Chehab 0 siblings, 0 replies; 10+ messages in thread From: Mauro Carvalho Chehab @ 2020-07-22 14:05 UTC (permalink / raw) To: Rahul Gottipati; +Cc: devel, gregkh, linux-kernel, sakari.ailus, linux-media Em Wed, 22 Jul 2020 17:00:52 +0530 Rahul Gottipati <rahul.blr97@gmail.com> escreveu: > This fixes some coding style issues of multiline comments to > correct a few checkpatch.pl warnings. > > Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> > --- > Changes in v2: > Distributed changes across 2 patches instead of the previous 1. > drivers/staging/media/atomisp/pci/atomisp_ioctl.c | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > index 9cdcbe774229..5bf3a86f98f8 100644 > --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c > @@ -1281,7 +1281,8 @@ static int atomisp_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) > * But the capture number cannot be determined by HAL. > * So HAL only sets the capture number to be 1 and queue multiple > * buffers. Atomisp driver needs to check this case and re-trigger > - * CSS to do capture when new buffer is queued. */ > + * CSS to do capture when new buffer is queued. > + */ > if (asd->continuous_mode->val && > atomisp_subdev_source_pad(vdev) > == ATOMISP_SUBDEV_PAD_SOURCE_CAPTURE && > @@ -1806,7 +1807,7 @@ static int atomisp_streamon(struct file *file, void *fh, > /* > * set freq to max when streaming count > 1 which indicate > * dual camera would run > - */ > + */ > if (atomisp_streaming_count(isp) > 1) { > if (atomisp_freq_scaling(isp, > ATOMISP_DFS_MODE_MAX, false) < 0) > @@ -2438,7 +2439,8 @@ static int atomisp_g_ext_ctrls(struct file *file, void *fh, > int i, ret = 0; > > /* input_lock is not need for the Camera related IOCTLs > - * The input_lock downgrade the FPS of 3A*/ > + * The input_lock downgrade the FPS of 3A > + */ On media (and on several subsystems), we keep the first line in blank, on multi-line comments: /* * input_lock is not need for the Camera related IOCTLs * The input_lock downgrade the FPS of 3A */ > ret = atomisp_camera_g_ext_ctrls(file, fh, c); > if (ret != -EINVAL) > return ret; > @@ -2521,7 +2523,8 @@ static int atomisp_camera_s_ext_ctrls(struct file *file, void *fh, > v4l2_s_ctrl(NULL, isp->flash->ctrl_handler, > &ctrl); > /* When flash mode is changed we need to reset > - * flash state */ > + * flash state > + */ > if (ctrl.id == V4L2_CID_FLASH_MODE) { > asd->params.flash_state = > ATOMISP_FLASH_IDLE; > @@ -2560,7 +2563,8 @@ static int atomisp_s_ext_ctrls(struct file *file, void *fh, > int i, ret = 0; > > /* input_lock is not need for the Camera related IOCTLs > - * The input_lock downgrade the FPS of 3A*/ > + * The input_lock downgrade the FPS of 3A > + */ > ret = atomisp_camera_s_ext_ctrls(file, fh, c); > if (ret != -EINVAL) > return ret; Thanks, Mauro _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-07-22 14:05 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-22 11:24 [PATCH v2 0/2] General coding style clean up Rahul Gottipati 2020-07-22 11:24 ` Rahul Gottipati 2020-07-22 11:28 ` [PATCH v2 1/2] media: atomisp: Fix coding style issue - remove beginning whitespaces Rahul Gottipati 2020-07-22 11:28 ` Rahul Gottipati 2020-07-22 14:03 ` Mauro Carvalho Chehab 2020-07-22 14:03 ` Mauro Carvalho Chehab 2020-07-22 11:30 ` [PATCH v2 2/2] media: atomisp: Fix coding style issue - correct multiline comments Rahul Gottipati 2020-07-22 11:30 ` Rahul Gottipati 2020-07-22 14:05 ` Mauro Carvalho Chehab 2020-07-22 14:05 ` Mauro Carvalho Chehab
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.