* [PATCH 2/4] fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2
2020-09-09 13:22 [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick Delaunay
@ 2020-09-09 13:22 ` Patrick Delaunay
2020-09-09 13:22 ` [PATCH 3/4] fastboot: add command to select the default emmc hwpart for boot Patrick Delaunay
` (2 subsequent siblings)
3 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2020-09-09 13:22 UTC (permalink / raw)
To: u-boot
Update the code and the configs for eMMC boot and userdata
partitions acces
- FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write)
- FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0"
- FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1"
This patch also removes the unnecessary dependency with
ARCH_MEDIATEK and EFI_PARTITION.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
configs/mt8518_ap1_emmc_defconfig | 2 +-
drivers/fastboot/Kconfig | 26 ++++++++++++-----
drivers/fastboot/fb_mmc.c | 47 ++++++++++++++++++++-----------
3 files changed, 50 insertions(+), 25 deletions(-)
diff --git a/configs/mt8518_ap1_emmc_defconfig b/configs/mt8518_ap1_emmc_defconfig
index d5fb0ccd48..2c760c1591 100644
--- a/configs/mt8518_ap1_emmc_defconfig
+++ b/configs/mt8518_ap1_emmc_defconfig
@@ -24,7 +24,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x56000000
CONFIG_FASTBOOT_BUF_SIZE=0x1E00000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
CONFIG_DM_MMC=y
CONFIG_MMC_HS200_SUPPORT=y
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index 45e07d05e0..8a92e75007 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -104,18 +104,19 @@ config FASTBOOT_FLASH_NAND_TRIMFFS
When flashing NAND enable the DROP_FFS flag to drop trailing all-0xff
pages.
-config FASTBOOT_MMC_BOOT1_SUPPORT
- bool "Enable EMMC_BOOT1 flash/erase"
- depends on FASTBOOT_FLASH_MMC && EFI_PARTITION && ARCH_MEDIATEK
+config FASTBOOT_MMC_BOOT_SUPPORT
+ bool "Enable EMMC_BOOT flash/erase"
+ depends on FASTBOOT_FLASH_MMC
help
The fastboot "flash" and "erase" commands normally does operations
- on EMMC userdata. Define this to enable the special commands to
- flash/erase EMMC_BOOT1.
- The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+ on eMMC userdata. Define this to enable the special commands to
+ flash/erase eMMC boot partition.
+ The default target name for updating eMMC boot partition 1/2 is
+ CONFIG_FASTBOOT_MMC_BOOT1_NAME/CONFIG_FASTBOOT_MMC_BOOT2_NAME.
config FASTBOOT_MMC_BOOT1_NAME
string "Target name for updating EMMC_BOOT1"
- depends on FASTBOOT_MMC_BOOT1_SUPPORT
+ depends on FASTBOOT_MMC_BOOT_SUPPORT
default "mmc0boot0"
help
The fastboot "flash" and "erase" commands support operations on
@@ -124,6 +125,17 @@ config FASTBOOT_MMC_BOOT1_NAME
defined here.
The default target name for updating EMMC_BOOT1 is "mmc0boot0".
+config FASTBOOT_MMC_BOOT2_NAME
+ string "Target name for updating EMMC_BOOT2"
+ depends on FASTBOOT_MMC_BOOT_SUPPORT
+ default "mmc0boot1"
+ help
+ The fastboot "flash" and "erase" commands support operations on
+ EMMC_BOOT2. This occurs when the specified "EMMC_BOOT2 name" on
+ the "fastboot flash" and "fastboot erase" commands match the value
+ defined here.
+ The default target name for updating EMMC_BOOT2 is "mmc0boot1".
+
config FASTBOOT_MMC_USER_SUPPORT
bool "Enable eMMC userdata partition flash/erase"
depends on FASTBOOT_FLASH_MMC
diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c
index ab6674cac2..3dd02ee9a8 100644
--- a/drivers/fastboot/fb_mmc.c
+++ b/drivers/fastboot/fb_mmc.c
@@ -132,7 +132,7 @@ static void write_raw_image(struct blk_desc *dev_desc,
fastboot_okay(NULL, response);
}
-#if defined(CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT) || \
+#if defined(CONFIG_FASTBOOT_MMC_BOOT_SUPPORT) || \
defined(CONFIG_FASTBOOT_MMC_USER_SUPPORT)
static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
{
@@ -154,16 +154,16 @@ static int fb_mmc_erase_mmc_hwpart(struct blk_desc *dev_desc)
}
#endif
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
-static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
- u32 buff_sz, char *response)
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
+static void fb_mmc_boot_ops(struct blk_desc *dev_desc, void *buffer,
+ int hwpart, u32 buff_sz, char *response)
{
lbaint_t blkcnt;
lbaint_t blks;
unsigned long blksz;
- // To operate on EMMC_BOOT1 (mmc0boot0), we first change the hwpart
- if (blk_dselect_hwpart(dev_desc, 1)) {
+ // To operate on EMMC_BOOT1/2 (mmc0boot0/1) we first change the hwpart
+ if (blk_dselect_hwpart(dev_desc, hwpart)) {
pr_err("Failed to select hwpart\n");
fastboot_fail("Failed to select hwpart", response);
return;
@@ -182,21 +182,24 @@ static void fb_mmc_boot1_ops(struct blk_desc *dev_desc, void *buffer,
return;
}
- debug("Start Flashing Image to EMMC_BOOT1...\n");
+ debug("Start Flashing Image to EMMC_BOOT%d...\n", hwpart);
blks = fb_mmc_blk_write(dev_desc, 0, blkcnt, buffer);
if (blks != blkcnt) {
- pr_err("Failed to write EMMC_BOOT1\n");
- fastboot_fail("Failed to write EMMC_BOOT1", response);
+ pr_err("Failed to write EMMC_BOOT%d\n", hwpart);
+ fastboot_fail("Failed to write EMMC_BOOT part",
+ response);
return;
}
- printf("........ wrote %lu bytes to EMMC_BOOT1\n",
- blkcnt * blksz);
+ printf("........ wrote %lu bytes to EMMC_BOOT%d\n",
+ blkcnt * blksz, hwpart);
} else { /* erase */
if (fb_mmc_erase_mmc_hwpart(dev_desc)) {
- fastboot_fail("Failed to erase EMMC_BOOT1", response);
+ pr_err("Failed to erase EMMC_BOOT%d\n", hwpart);
+ fastboot_fail("Failed to erase EMMC_BOOT part",
+ response);
return;
}
}
@@ -421,10 +424,15 @@ void fastboot_mmc_flash_write(const char *cmd, void *download_buffer,
return;
}
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
- fb_mmc_boot1_ops(dev_desc, download_buffer,
- download_bytes, response);
+ fb_mmc_boot_ops(dev_desc, download_buffer, 1,
+ download_bytes, response);
+ return;
+ }
+ if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT2_NAME) == 0) {
+ fb_mmc_boot_ops(dev_desc, download_buffer, 2,
+ download_bytes, response);
return;
}
#endif
@@ -546,10 +554,15 @@ void fastboot_mmc_erase(const char *cmd, char *response)
return;
}
-#ifdef CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT
+#ifdef CONFIG_FASTBOOT_MMC_BOOT_SUPPORT
if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT1_NAME) == 0) {
/* erase EMMC boot1 */
- fb_mmc_boot1_ops(dev_desc, NULL, 0, response);
+ fb_mmc_boot_ops(dev_desc, NULL, 1, 0, response);
+ return;
+ }
+ if (strcmp(cmd, CONFIG_FASTBOOT_MMC_BOOT2_NAME) == 0) {
+ /* erase EMMC boot2 */
+ fb_mmc_boot_ops(dev_desc, NULL, 2, 0, response);
return;
}
#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/4] fastboot: add command to select the default emmc hwpart for boot
2020-09-09 13:22 [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick Delaunay
2020-09-09 13:22 ` [PATCH 2/4] fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2 Patrick Delaunay
@ 2020-09-09 13:22 ` Patrick Delaunay
2020-09-09 13:22 ` [PATCH 4/4] fastboot: add command to select the eMMC boot configuration Patrick Delaunay
2020-12-09 10:48 ` [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick DELAUNAY
3 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2020-09-09 13:22 UTC (permalink / raw)
To: u-boot
Add fastboot command oem partconf which executes the command
``mmc partconf <id> <arg> 0`` on the current <id> mmc device
to configure the eMMC boot partition with
<arg>: boot_ack boot_partition, so the command is:
$> fastboot oem partconf:<boot_ack> <boot_partition>
The partition_access argument is forced to 0 (userdata)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
doc/android/fastboot.rst | 2 ++
drivers/fastboot/Kconfig | 7 +++++++
drivers/fastboot/fb_command.c | 36 +++++++++++++++++++++++++++++++++++
include/fastboot.h | 3 +++
4 files changed, 48 insertions(+)
diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst
index de3f6c37d7..7d69372753 100644
--- a/doc/android/fastboot.rst
+++ b/doc/android/fastboot.rst
@@ -23,6 +23,8 @@ The current implementation supports the following standard commands:
The following OEM commands are supported (if enabled):
- ``oem format`` - this executes ``gpt write mmc %x $partitions``
+- ``oem partconf`` - this executes ``mmc partconf %x <arg> 0`` to configure eMMC
+ with <arg> = boot_ack boot_partition
Support for both eMMC and NAND devices is included.
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index 8a92e75007..1bcc8d4ab9 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -189,6 +189,13 @@ config FASTBOOT_CMD_OEM_FORMAT
relies on the env variable partitions to contain the list of
partitions as required by the gpt command.
+config FASTBOOT_CMD_OEM_PARTCONF
+ bool "Enable the 'oem partconf' command"
+ depends on FASTBOOT_FLASH_MMC && SUPPORT_EMMC_BOOT
+ help
+ Add support for the "oem partconf" command from a client. This set
+ the mmc boot-partition for the selecting eMMC device.
+
endif # FASTBOOT
endmenu
diff --git a/drivers/fastboot/fb_command.c b/drivers/fastboot/fb_command.c
index 49f6a61c37..e42c018348 100644
--- a/drivers/fastboot/fb_command.c
+++ b/drivers/fastboot/fb_command.c
@@ -40,6 +40,9 @@ static void reboot_bootloader(char *, char *);
#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_FORMAT)
static void oem_format(char *, char *);
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+static void oem_partconf(char *, char *);
+#endif
static const struct {
const char *command;
@@ -89,6 +92,12 @@ static const struct {
.dispatch = oem_format,
},
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+ [FASTBOOT_COMMAND_OEM_PARTCONF] = {
+ .command = "oem partconf",
+ .dispatch = oem_partconf,
+ },
+#endif
};
/**
@@ -336,3 +345,30 @@ static void oem_format(char *cmd_parameter, char *response)
}
}
#endif
+
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+/**
+ * oem_partconf() - Execute the OEM partconf command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void oem_partconf(char *cmd_parameter, char *response)
+{
+ char cmdbuf[32];
+
+ if (!cmd_parameter) {
+ fastboot_fail("Expected command parameter", response);
+ return;
+ }
+
+ /* execute 'mmc partconfg' command with cmd_parameter arguments*/
+ snprintf(cmdbuf, sizeof(cmdbuf), "mmc partconf %x %s 0",
+ CONFIG_FASTBOOT_FLASH_MMC_DEV, cmd_parameter);
+ printf("Execute: %s\n", cmdbuf);
+ if (run_command(cmdbuf, 0))
+ fastboot_fail("Cannot set oem partconf", response);
+ else
+ fastboot_okay(NULL, response);
+}
+#endif
diff --git a/include/fastboot.h b/include/fastboot.h
index 1933b1d98e..3e68852e9a 100644
--- a/include/fastboot.h
+++ b/include/fastboot.h
@@ -36,6 +36,9 @@ enum {
#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_FORMAT)
FASTBOOT_COMMAND_OEM_FORMAT,
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
+ FASTBOOT_COMMAND_OEM_PARTCONF,
+#endif
FASTBOOT_COMMAND_COUNT
};
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 4/4] fastboot: add command to select the eMMC boot configuration
2020-09-09 13:22 [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick Delaunay
2020-09-09 13:22 ` [PATCH 2/4] fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2 Patrick Delaunay
2020-09-09 13:22 ` [PATCH 3/4] fastboot: add command to select the default emmc hwpart for boot Patrick Delaunay
@ 2020-09-09 13:22 ` Patrick Delaunay
2020-12-09 10:48 ` [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick DELAUNAY
3 siblings, 0 replies; 7+ messages in thread
From: Patrick Delaunay @ 2020-09-09 13:22 UTC (permalink / raw)
To: u-boot
Add command oem bootbus which executes the command
``mmc bootbus <id> <arg>`` on the current fastboot mmc device
(<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot
configuration on first update, with
<arg> = boot_bus_width reset_boot_bus_width boot_mode
$> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---
doc/android/fastboot.rst | 1 +
drivers/fastboot/Kconfig | 7 +++++++
drivers/fastboot/fb_command.c | 36 +++++++++++++++++++++++++++++++++++
include/fastboot.h | 3 +++
4 files changed, 47 insertions(+)
diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst
index 7d69372753..6aa725fcd8 100644
--- a/doc/android/fastboot.rst
+++ b/doc/android/fastboot.rst
@@ -25,6 +25,7 @@ The following OEM commands are supported (if enabled):
- ``oem format`` - this executes ``gpt write mmc %x $partitions``
- ``oem partconf`` - this executes ``mmc partconf %x <arg> 0`` to configure eMMC
with <arg> = boot_ack boot_partition
+- ``oem bootbus`` - this executes ``mmc bootbus %x %s`` to configure eMMC
Support for both eMMC and NAND devices is included.
diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index 1bcc8d4ab9..a17e488714 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -196,6 +196,13 @@ config FASTBOOT_CMD_OEM_PARTCONF
Add support for the "oem partconf" command from a client. This set
the mmc boot-partition for the selecting eMMC device.
+config FASTBOOT_CMD_OEM_BOOTBUS
+ bool "Enable the 'oem bootbus' command"
+ depends on FASTBOOT_FLASH_MMC && SUPPORT_EMMC_BOOT
+ help
+ Add support for the "oem bootbus" command from a client. This set
+ the mmc boot configuration for the selecting eMMC device.
+
endif # FASTBOOT
endmenu
diff --git a/drivers/fastboot/fb_command.c b/drivers/fastboot/fb_command.c
index e42c018348..00efd477db 100644
--- a/drivers/fastboot/fb_command.c
+++ b/drivers/fastboot/fb_command.c
@@ -43,6 +43,9 @@ static void oem_format(char *, char *);
#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
static void oem_partconf(char *, char *);
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+static void oem_bootbus(char *, char *);
+#endif
static const struct {
const char *command;
@@ -98,6 +101,12 @@ static const struct {
.dispatch = oem_partconf,
},
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+ [FASTBOOT_COMMAND_OEM_BOOTBUS] = {
+ .command = "oem bootbus",
+ .dispatch = oem_bootbus,
+ },
+#endif
};
/**
@@ -372,3 +381,30 @@ static void oem_partconf(char *cmd_parameter, char *response)
fastboot_okay(NULL, response);
}
#endif
+
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+/**
+ * oem_bootbus() - Execute the OEM bootbus command
+ *
+ * @cmd_parameter: Pointer to command parameter
+ * @response: Pointer to fastboot response buffer
+ */
+static void oem_bootbus(char *cmd_parameter, char *response)
+{
+ char cmdbuf[32];
+
+ if (!cmd_parameter) {
+ fastboot_fail("Expected command parameter", response);
+ return;
+ }
+
+ /* execute 'mmc bootbus' command with cmd_parameter arguments*/
+ snprintf(cmdbuf, sizeof(cmdbuf), "mmc bootbus %x %s",
+ CONFIG_FASTBOOT_FLASH_MMC_DEV, cmd_parameter);
+ printf("Execute: %s\n", cmdbuf);
+ if (run_command(cmdbuf, 0))
+ fastboot_fail("Cannot set oem bootbus", response);
+ else
+ fastboot_okay(NULL, response);
+}
+#endif
diff --git a/include/fastboot.h b/include/fastboot.h
index 3e68852e9a..966ffc6d94 100644
--- a/include/fastboot.h
+++ b/include/fastboot.h
@@ -39,6 +39,9 @@ enum {
#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_PARTCONF)
FASTBOOT_COMMAND_OEM_PARTCONF,
#endif
+#if CONFIG_IS_ENABLED(FASTBOOT_CMD_OEM_BOOTBUS)
+ FASTBOOT_COMMAND_OEM_BOOTBUS,
+#endif
FASTBOOT_COMMAND_COUNT
};
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
2020-09-09 13:22 [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick Delaunay
` (2 preceding siblings ...)
2020-09-09 13:22 ` [PATCH 4/4] fastboot: add command to select the eMMC boot configuration Patrick Delaunay
@ 2020-12-09 10:48 ` Patrick DELAUNAY
2021-01-23 12:15 ` Lukasz Majewski
3 siblings, 1 reply; 7+ messages in thread
From: Patrick DELAUNAY @ 2020-12-09 10:48 UTC (permalink / raw)
To: u-boot
Hi Lukasz,
> From: Patrick DELAUNAY <patrick.delaunay@st.com>
> Sent: mercredi 9 septembre 2020 15:23
> To: u-boot at lists.denx.de
> Cc: Patrick DELAUNAY <patrick.delaunay@st.com>; Jagan Teki
> <jagan@amarulasolutions.com>; Kever Yang <kever.yang@rock-chips.com>;
> Mingming lee <mingming.lee@mediatek.com>; Miquel Raynal
> <miquel.raynal@bootlin.com>; Peng Fan <peng.fan@nxp.com>; Simon Glass
> <sjg@chromium.org>; U-Boot STM32 <uboot-stm32@st-md-
> mailman.stormreply.com>
> Subject: [PATCH 1/4] fastboot: mmc: Add
> CONFIG_FASTBOOT_MMC_USER_SUPPORT
> Importance: High
>
> Split userdata and boot partition support for eMMC update and correct the
> description (update is supported).
>
> The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to
> activate support of userdata partition update, based on target
> name=CONFIG_FASTBOOT_MMC_USER_NAME
>
> This patch also removes the unnecessary dependency with ARCH_MEDIATEK
> and EFI_PARTITION.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> ---
>
> configs/mt8518_ap1_emmc_defconfig | 1 +
> drivers/fastboot/Kconfig | 22 +++++++++++++++++-----
> drivers/fastboot/fb_mmc.c | 9 ++++++---
> 3 files changed, 24 insertions(+), 8 deletions(-)
>
Gentle reminder,
Any comments on this serie [1]
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509
Patrick
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT
2020-12-09 10:48 ` [PATCH 1/4] fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Patrick DELAUNAY
@ 2021-01-23 12:15 ` Lukasz Majewski
[not found] ` <a8f9542dacb742afa96d2977df159d3f@SFHDAG2NODE3.st.com>
0 siblings, 1 reply; 7+ messages in thread
From: Lukasz Majewski @ 2021-01-23 12:15 UTC (permalink / raw)
To: u-boot
Hi Patrick,
> Hi Lukasz,
>
> > From: Patrick DELAUNAY <patrick.delaunay@st.com>
> > Sent: mercredi 9 septembre 2020 15:23
> > To: u-boot at lists.denx.de
> > Cc: Patrick DELAUNAY <patrick.delaunay@st.com>; Jagan Teki
> > <jagan@amarulasolutions.com>; Kever Yang
> > <kever.yang@rock-chips.com>; Mingming lee
> > <mingming.lee@mediatek.com>; Miquel Raynal
> > <miquel.raynal@bootlin.com>; Peng Fan <peng.fan@nxp.com>; Simon
> > Glass <sjg@chromium.org>; U-Boot STM32 <uboot-stm32@st-md-
> > mailman.stormreply.com> Subject: [PATCH 1/4] fastboot: mmc: Add
> > CONFIG_FASTBOOT_MMC_USER_SUPPORT
> > Importance: High
> >
> > Split userdata and boot partition support for eMMC update and
> > correct the description (update is supported).
> >
> > The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to
> > activate support of userdata partition update, based on target
> > name=CONFIG_FASTBOOT_MMC_USER_NAME
> >
> > This patch also removes the unnecessary dependency with
> > ARCH_MEDIATEK and EFI_PARTITION.
> >
> > Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
> > ---
> >
> > configs/mt8518_ap1_emmc_defconfig | 1 +
> > drivers/fastboot/Kconfig | 22 +++++++++++++++++-----
> > drivers/fastboot/fb_mmc.c | 9 ++++++---
> > 3 files changed, 24 insertions(+), 8 deletions(-)
> >
>
> Gentle reminder,
>
> Any comments on this serie [1]
>
> [1] http://patchwork.ozlabs.org/project/uboot/list/?series=200509
>
> Patrick
Could you rebase this on top of current -master (after I do send the
PR) and resend. There are now build / application errors on this series.
Thanks in advance and please find my apologize for very late reply
(covid19 + personal matters).
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210123/03748a27/attachment.sig>
^ permalink raw reply [flat|nested] 7+ messages in thread