From: Luka Kovacic <luka.kovacic@sartura.hr> To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org Cc: lee.jones@linaro.org, pavel@ucw.cz, dmurphy@ti.com, robh+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, andrew@lunn.ch, jason@lakedaemon.net, gregory.clement@bootlin.com, marek.behun@nic.cz, luka.perkov@sartura.hr, robert.marko@sartura.hr, Luka Kovacic <luka.kovacic@sartura.hr> Subject: [PATCH v3 0/7] Add support for the iEi Puzzle-M801 board Date: Wed, 30 Sep 2020 03:40:51 +0200 [thread overview] Message-ID: <20200930014058.44460-1-luka.kovacic@sartura.hr> (raw) This patchset adds support for the iEi Puzzle-M801 1U Rackmount Network Appliance and for the iEi WT61P803 PUZZLE microcontroller, which enables some board specific features like fan and LED control, system power management and temperature sensor reading. The platform is based on the popular Marvell Armada 8040 SoC and supports up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes only) and an M.2 type B slot. External chassis ports: 2x 10 GbE SFP+ 4x 1 GbE (Marvell 88E1512P) 2x USB 3.0 1x RJ45 serial port All notable board components are supported in this patchset. Changes for v2: - Use LAAs for local-mac-address and match reg values - Code styling changes - Error handling moved to the end of the function - Define all magic numbers in the main header file - Convert the driver to make it OF independent - Refactor hwmon to use devm_hwmon_device_register_with_info() - Reduce the number of mutex locks - Allocate memory once for the response buffer - Reduce managed memory allocations Changes for v3: - Move iei-wt61p803-puzzle driver sysfs interface documentation to testing - Change some internal functions to static - Sync dt-bindings examples with the iEi Puzzle-M801 board dts - Remove obsolete device tree properties and correct LED functions - Reverse christmas tree variable declaration order, where possible - MAC address sysfs function rewrite - Fixed struct members size, where reasonable (MFD driver) - Add an error check for hwmon_dev - Use devm_led_classdev_register_ext() in the LED driver Luka Kovacic (7): dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board .../testing/sysfs-driver-iei-wt61p803-puzzle | 55 + .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 + .../leds/iei,wt61p803-puzzle-leds.yaml | 45 + .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 13 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../dts/marvell/armada-8040-puzzle-m801.dts | 524 +++++++++ drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 513 ++++++++ drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-iei-wt61p803-puzzle.c | 157 +++ drivers/mfd/Kconfig | 8 + drivers/mfd/Makefile | 1 + drivers/mfd/iei-wt61p803-puzzle.c | 1045 +++++++++++++++++ include/linux/mfd/iei-wt61p803-puzzle.h | 69 ++ 18 files changed, 2574 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Luka Kovacic <luka.kovacic@sartura.hr> To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org Cc: andrew@lunn.ch, jdelvare@suse.com, luka.perkov@sartura.hr, jason@lakedaemon.net, gregory.clement@bootlin.com, marek.behun@nic.cz, Luka Kovacic <luka.kovacic@sartura.hr>, robh+dt@kernel.org, dmurphy@ti.com, pavel@ucw.cz, robert.marko@sartura.hr, lee.jones@linaro.org, linux@roeck-us.net Subject: [PATCH v3 0/7] Add support for the iEi Puzzle-M801 board Date: Wed, 30 Sep 2020 03:40:51 +0200 [thread overview] Message-ID: <20200930014058.44460-1-luka.kovacic@sartura.hr> (raw) This patchset adds support for the iEi Puzzle-M801 1U Rackmount Network Appliance and for the iEi WT61P803 PUZZLE microcontroller, which enables some board specific features like fan and LED control, system power management and temperature sensor reading. The platform is based on the popular Marvell Armada 8040 SoC and supports up to 16 GB of DDR4 2400 MHz ECC RAM. It has a PCIe x16 slot (x2 lanes only) and an M.2 type B slot. External chassis ports: 2x 10 GbE SFP+ 4x 1 GbE (Marvell 88E1512P) 2x USB 3.0 1x RJ45 serial port All notable board components are supported in this patchset. Changes for v2: - Use LAAs for local-mac-address and match reg values - Code styling changes - Error handling moved to the end of the function - Define all magic numbers in the main header file - Convert the driver to make it OF independent - Refactor hwmon to use devm_hwmon_device_register_with_info() - Reduce the number of mutex locks - Allocate memory once for the response buffer - Reduce managed memory allocations Changes for v3: - Move iei-wt61p803-puzzle driver sysfs interface documentation to testing - Change some internal functions to static - Sync dt-bindings examples with the iEi Puzzle-M801 board dts - Remove obsolete device tree properties and correct LED functions - Reverse christmas tree variable declaration order, where possible - MAC address sysfs function rewrite - Fixed struct members size, where reasonable (MFD driver) - Add an error check for hwmon_dev - Use devm_led_classdev_register_ext() in the LED driver Luka Kovacic (7): dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board .../testing/sysfs-driver-iei-wt61p803-puzzle | 55 + .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 + .../leds/iei,wt61p803-puzzle-leds.yaml | 45 + .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 13 + arch/arm64/boot/dts/marvell/Makefile | 1 + .../dts/marvell/armada-8040-puzzle-m801.dts | 524 +++++++++ drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 513 ++++++++ drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-iei-wt61p803-puzzle.c | 157 +++ drivers/mfd/Kconfig | 8 + drivers/mfd/Makefile | 1 + drivers/mfd/iei-wt61p803-puzzle.c | 1045 +++++++++++++++++ include/linux/mfd/iei-wt61p803-puzzle.h | 69 ++ 18 files changed, 2574 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-iei-wt61p803-puzzle create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-30 1:41 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-30 1:40 Luka Kovacic [this message] 2020-09-30 1:40 ` [PATCH v3 0/7] Add support for the iEi Puzzle-M801 board Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 8:40 ` kernel test robot 2020-09-30 8:40 ` kernel test robot 2020-09-30 8:40 ` kernel test robot 2020-09-30 1:40 ` [PATCH v3 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 19:48 ` Pavel Machek 2020-09-30 19:48 ` Pavel Machek 2020-10-06 6:41 ` Luka Kovacic 2020-10-06 6:41 ` Luka Kovacic 2020-10-07 1:10 ` Luka Kovacic 2020-10-07 1:10 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 6/7] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200930014058.44460-1-luka.kovacic@sartura.hr \ --to=luka.kovacic@sartura.hr \ --cc=andrew@lunn.ch \ --cc=dmurphy@ti.com \ --cc=gregory.clement@bootlin.com \ --cc=jason@lakedaemon.net \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=luka.perkov@sartura.hr \ --cc=marek.behun@nic.cz \ --cc=pavel@ucw.cz \ --cc=robert.marko@sartura.hr \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.