From: Luka Kovacic <luka.kovacic@sartura.hr> To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org Cc: lee.jones@linaro.org, pavel@ucw.cz, dmurphy@ti.com, robh+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, andrew@lunn.ch, jason@lakedaemon.net, gregory.clement@bootlin.com, marek.behun@nic.cz, luka.perkov@sartura.hr, robert.marko@sartura.hr, Luka Kovacic <luka.kovacic@sartura.hr> Subject: [PATCH v3 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Date: Wed, 30 Sep 2020 03:40:52 +0200 [thread overview] Message-ID: <20200930014058.44460-2-luka.kovacic@sartura.hr> (raw) In-Reply-To: <20200930014058.44460-1-luka.kovacic@sartura.hr> Add the iEi WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED drivers. A new vendor prefix is also added accordingly for IEI Integration Corp. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Robert Marko <robert.marko@sartura.hr> --- .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 ++++++++++ .../leds/iei,wt61p803-puzzle-leds.yaml | 45 ++++++++++ .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 4 files changed, 170 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml new file mode 100644 index 000000000000..37f0030df237 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. + + The HWMON module is a sub-node of the MCU node in the Device Tree. + +properties: + compatible: + const: iei,wt61p803-puzzle-hwmon + +patternProperties: + "^fan-group@[0-1]$": + type: object + properties: + reg: + minimum: 0 + maximum: 1 + description: + Fan group ID + cooling-levels: + maxItems: 255 + description: + Cooling levels for the fans (PWM value mapping) + description: | + Properties for each fan group. + required: + - reg + +required: + - compatible diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml new file mode 100644 index 000000000000..0d353e5803bf --- /dev/null +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. + + The LED module is a sub-node of the MCU node in the Device Tree. + +properties: + compatible: + const: iei,wt61p803-puzzle-leds + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@0$": + type: object + $ref: common.yaml + description: | + Properties for a single LED. + + properties: + reg: + description: + Index of the LED. Only one LED is supported at the moment. + minimum: 0 + maximum: 0 + +required: + - compatible + - "#address-cells" + - "#size-cells" diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml new file mode 100644 index 000000000000..79a232d75093 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards. + It's used for controlling system power states, fans, LEDs and temperature + sensors. + + For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the + binding documents under the respective subsystem directories. + +properties: + compatible: + const: iei,wt61p803-puzzle + + current-speed: + description: + Serial bus speed in bps + maxItems: 1 + + enable-beep: true + + iei-wt61p803-hwmon: + $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml + + leds: + $ref: ../leds/iei,wt61p803-puzzle-leds.yaml + +required: + - compatible + - current-speed + +examples: + - | + #include <dt-bindings/leds/common.h> + serial { + status = "okay"; + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + iei-wt61p803-puzzle-hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + + #address-cells = <1>; + #size-cells = <0>; + + fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 63996ab03521..5f2595f0b2ad 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -467,6 +467,8 @@ patternProperties: description: IC Plus Corp. "^idt,.*": description: Integrated Device Technologies, Inc. + "^iei,.*": + description: IEI Integration Corp. "^ifi,.*": description: Ingenieurburo Fur Ic-Technologie (I/F/I) "^ilitek,.*": -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Luka Kovacic <luka.kovacic@sartura.hr> To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org Cc: andrew@lunn.ch, jdelvare@suse.com, luka.perkov@sartura.hr, jason@lakedaemon.net, gregory.clement@bootlin.com, marek.behun@nic.cz, Luka Kovacic <luka.kovacic@sartura.hr>, robh+dt@kernel.org, dmurphy@ti.com, pavel@ucw.cz, robert.marko@sartura.hr, lee.jones@linaro.org, linux@roeck-us.net Subject: [PATCH v3 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Date: Wed, 30 Sep 2020 03:40:52 +0200 [thread overview] Message-ID: <20200930014058.44460-2-luka.kovacic@sartura.hr> (raw) In-Reply-To: <20200930014058.44460-1-luka.kovacic@sartura.hr> Add the iEi WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED drivers. A new vendor prefix is also added accordingly for IEI Integration Corp. Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Robert Marko <robert.marko@sartura.hr> --- .../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 ++++++++++ .../leds/iei,wt61p803-puzzle-leds.yaml | 45 ++++++++++ .../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 4 files changed, 170 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml diff --git a/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml new file mode 100644 index 000000000000..37f0030df237 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/iei,wt61p803-puzzle-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU HWMON module from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. + + The HWMON module is a sub-node of the MCU node in the Device Tree. + +properties: + compatible: + const: iei,wt61p803-puzzle-hwmon + +patternProperties: + "^fan-group@[0-1]$": + type: object + properties: + reg: + minimum: 0 + maximum: 1 + description: + Fan group ID + cooling-levels: + maxItems: 255 + description: + Cooling levels for the fans (PWM value mapping) + description: | + Properties for each fan group. + required: + - reg + +required: + - compatible diff --git a/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml new file mode 100644 index 000000000000..0d353e5803bf --- /dev/null +++ b/Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/iei,wt61p803-puzzle-leds.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU LED module from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + This module is a part of the iEi WT61P803 PUZZLE MFD device. For more details + see Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml. + + The LED module is a sub-node of the MCU node in the Device Tree. + +properties: + compatible: + const: iei,wt61p803-puzzle-leds + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@0$": + type: object + $ref: common.yaml + description: | + Properties for a single LED. + + properties: + reg: + description: + Index of the LED. Only one LED is supported at the moment. + minimum: 0 + maximum: 0 + +required: + - compatible + - "#address-cells" + - "#size-cells" diff --git a/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml new file mode 100644 index 000000000000..79a232d75093 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/iei,wt61p803-puzzle.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iEi WT61P803 PUZZLE MCU from IEI Integration Corp. + +maintainers: + - Luka Kovacic <luka.kovacic@sartura.hr> + +description: | + iEi WT61P803 PUZZLE MCU is embedded in some iEi Puzzle series boards. + It's used for controlling system power states, fans, LEDs and temperature + sensors. + + For Device Tree bindings of other sub-modules (HWMON, LEDs) refer to the + binding documents under the respective subsystem directories. + +properties: + compatible: + const: iei,wt61p803-puzzle + + current-speed: + description: + Serial bus speed in bps + maxItems: 1 + + enable-beep: true + + iei-wt61p803-hwmon: + $ref: ../hwmon/iei,wt61p803-puzzle-hwmon.yaml + + leds: + $ref: ../leds/iei,wt61p803-puzzle-leds.yaml + +required: + - compatible + - current-speed + +examples: + - | + #include <dt-bindings/leds/common.h> + serial { + status = "okay"; + mcu { + compatible = "iei,wt61p803-puzzle"; + current-speed = <115200>; + enable-beep; + + leds { + compatible = "iei,wt61p803-puzzle-leds"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + iei-wt61p803-puzzle-hwmon { + compatible = "iei,wt61p803-puzzle-hwmon"; + + #address-cells = <1>; + #size-cells = <0>; + + fan-group@0 { + #cooling-cells = <2>; + reg = <0x00>; + cooling-levels = <64 102 170 230 250>; + }; + + fan-group@1 { + #cooling-cells = <2>; + reg = <0x01>; + cooling-levels = <64 102 170 230 250>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 63996ab03521..5f2595f0b2ad 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -467,6 +467,8 @@ patternProperties: description: IC Plus Corp. "^idt,.*": description: Integrated Device Technologies, Inc. + "^iei,.*": + description: IEI Integration Corp. "^ifi,.*": description: Ingenieurburo Fur Ic-Technologie (I/F/I) "^ilitek,.*": -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-30 1:41 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-30 1:40 [PATCH v3 0/7] Add support for the iEi Puzzle-M801 board Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic [this message] 2020-09-30 1:40 ` [PATCH v3 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 8:40 ` kernel test robot 2020-09-30 8:40 ` kernel test robot 2020-09-30 8:40 ` kernel test robot 2020-09-30 1:40 ` [PATCH v3 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 19:48 ` Pavel Machek 2020-09-30 19:48 ` Pavel Machek 2020-10-06 6:41 ` Luka Kovacic 2020-10-06 6:41 ` Luka Kovacic 2020-10-07 1:10 ` Luka Kovacic 2020-10-07 1:10 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 6/7] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic 2020-09-30 1:40 ` [PATCH v3 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board Luka Kovacic 2020-09-30 1:40 ` Luka Kovacic
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200930014058.44460-2-luka.kovacic@sartura.hr \ --to=luka.kovacic@sartura.hr \ --cc=andrew@lunn.ch \ --cc=dmurphy@ti.com \ --cc=gregory.clement@bootlin.com \ --cc=jason@lakedaemon.net \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=luka.perkov@sartura.hr \ --cc=marek.behun@nic.cz \ --cc=pavel@ucw.cz \ --cc=robert.marko@sartura.hr \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.