From: Lars Povlsen <lars.povlsen@microchip.com> To: Linus Walleij <linus.walleij@linaro.org> Cc: Lars Povlsen <lars.povlsen@microchip.com>, Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>, <devicetree@vger.kernel.org>, <linux-gpio@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH v4 3/3] arm64: dts: sparx5: Add SGPIO devices Date: Wed, 7 Oct 2020 13:11:45 +0200 [thread overview] Message-ID: <20201007111145.2306213-4-lars.povlsen@microchip.com> (raw) In-Reply-To: <20201007111145.2306213-1-lars.povlsen@microchip.com> This adds SGPIO devices for the Sparx5 SoC and configures it for the applicable reference boards. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> --- arch/arm64/boot/dts/microchip/sparx5.dtsi | 91 ++++++ .../boot/dts/microchip/sparx5_pcb125.dts | 5 + .../dts/microchip/sparx5_pcb134_board.dtsi | 258 ++++++++++++++++++ .../dts/microchip/sparx5_pcb135_board.dtsi | 55 ++++ 4 files changed, 409 insertions(+) diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 1def30e6b728..d64621d1213b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -231,6 +231,22 @@ si2_pins: si2-pins { function = "si2"; }; + sgpio0_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; + function = "sg1"; + }; + + sgpio2_pins: sgpio2-pins { + pins = "GPIO_30", "GPIO_31", "GPIO_32", + "GPIO_33"; + function = "sg2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -261,6 +277,81 @@ emmc_pins: emmc-pins { }; }; + sgpio0: gpio@61101036c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio0_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101036c 0x100>; + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out0: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio1: gpio@611010484 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio1_pins>; + pinctrl-names = "default"; + reg = <0x6 0x11010484 0x100>; + sgpio_in1: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio2: gpio@61101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101059c 0x100>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + i2c0: i2c@600101000 { compatible = "snps,designware-i2c"; status = "disabled"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 6b2da7c7520c..9baa085d7861 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -69,6 +69,11 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <0 23>; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 35984785d611..4f1512b0e871 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -36,6 +36,242 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &spi0 { @@ -54,6 +290,28 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &gpio { i2cmux_pins_i: i2cmux-pins-i { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 7de66806b14b..66381271bef9 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -20,6 +20,50 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@3 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@4 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@5 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@6 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@7 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { @@ -67,6 +111,17 @@ spi-flash@9 { }; }; +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl"; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Lars Povlsen <lars.povlsen@microchip.com> To: Linus Walleij <linus.walleij@linaro.org> Cc: devicetree@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com>, linux-kernel@vger.kernel.org, Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>, linux-gpio@vger.kernel.org, Lars Povlsen <lars.povlsen@microchip.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 3/3] arm64: dts: sparx5: Add SGPIO devices Date: Wed, 7 Oct 2020 13:11:45 +0200 [thread overview] Message-ID: <20201007111145.2306213-4-lars.povlsen@microchip.com> (raw) In-Reply-To: <20201007111145.2306213-1-lars.povlsen@microchip.com> This adds SGPIO devices for the Sparx5 SoC and configures it for the applicable reference boards. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> --- arch/arm64/boot/dts/microchip/sparx5.dtsi | 91 ++++++ .../boot/dts/microchip/sparx5_pcb125.dts | 5 + .../dts/microchip/sparx5_pcb134_board.dtsi | 258 ++++++++++++++++++ .../dts/microchip/sparx5_pcb135_board.dtsi | 55 ++++ 4 files changed, 409 insertions(+) diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi index 1def30e6b728..d64621d1213b 100644 --- a/arch/arm64/boot/dts/microchip/sparx5.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi @@ -231,6 +231,22 @@ si2_pins: si2-pins { function = "si2"; }; + sgpio0_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + sgpio1_pins: sgpio1-pins { + pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13"; + function = "sg1"; + }; + + sgpio2_pins: sgpio2-pins { + pins = "GPIO_30", "GPIO_31", "GPIO_32", + "GPIO_33"; + function = "sg2"; + }; + uart_pins: uart-pins { pins = "GPIO_10", "GPIO_11"; function = "uart"; @@ -261,6 +277,81 @@ emmc_pins: emmc-pins { }; }; + sgpio0: gpio@61101036c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio0_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101036c 0x100>; + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out0: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio1: gpio@611010484 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio1_pins>; + pinctrl-names = "default"; + reg = <0x6 0x11010484 0x100>; + sgpio_in1: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + + sgpio2: gpio@61101059c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "microchip,sparx5-sgpio"; + status = "disabled"; + clocks = <&sys_clk>; + pinctrl-0 = <&sgpio2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x1101059c 0x100>; + sgpio_in2: gpio@0 { + reg = <0>; + compatible = "microchip,sparx5-sgpio-bank"; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + sgpio_out2: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <96>; + }; + }; + i2c0: i2c@600101000 { compatible = "snps,designware-i2c"; status = "disabled"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 6b2da7c7520c..9baa085d7861 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -69,6 +69,11 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <0 23>; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 35984785d611..4f1512b0e871 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -36,6 +36,242 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &spi0 { @@ -54,6 +290,28 @@ spi-flash@9 { }; }; +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &gpio { i2cmux_pins_i: i2cmux-pins-i { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index 7de66806b14b..66381271bef9 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -20,6 +20,50 @@ gpio-restart { gpios = <&gpio 37 GPIO_ACTIVE_LOW>; priority = <200>; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@1 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@3 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@4 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@5 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@6 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@7 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &gpio { @@ -67,6 +111,17 @@ spi-flash@9 { }; }; +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &axi { i2c0_imux: i2c0-imux@0 { compatible = "i2c-mux-pinctrl"; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-07 11:12 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-07 11:11 [PATCH v4 0/3] pinctrl: Adding support for Microchip/Microsemi serial GPIO controller Lars Povlsen 2020-10-07 11:11 ` Lars Povlsen 2020-10-07 11:11 ` [PATCH v4 1/3] dt-bindings: pinctrl: Add bindings for pinctrl-mchp-sgpio driver Lars Povlsen 2020-10-07 11:11 ` Lars Povlsen 2020-10-07 13:35 ` Linus Walleij 2020-10-07 13:35 ` Linus Walleij 2020-10-08 11:43 ` Lars Povlsen 2020-10-08 11:43 ` Lars Povlsen 2020-10-07 11:11 ` [PATCH v4 2/3] pinctrl: pinctrl-mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO Lars Povlsen 2020-10-07 11:11 ` Lars Povlsen 2020-10-07 11:11 ` Lars Povlsen [this message] 2020-10-07 11:11 ` [PATCH v4 3/3] arm64: dts: sparx5: Add SGPIO devices Lars Povlsen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201007111145.2306213-4-lars.povlsen@microchip.com \ --to=lars.povlsen@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.