All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ophir Munk <ophirmu@nvidia.com>
To: dev@dpdk.org, Ferruh Yigit <ferruh.yigit@intel.com>,
	Olivier Matz <olivier.matz@6wind.com>,
	Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Jingjing Wu <jingjing.wu@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>
Cc: Ophir Munk <ophirmu@mellanox.com>
Subject: [dpdk-dev] [PATCH v6 3/3] app/testpmd: tunnel parsing protocols cleanup
Date: Wed,  7 Oct 2020 15:30:55 +0000	[thread overview]
Message-ID: <20201007153055.28820-4-ophirmu@nvidia.com> (raw)
In-Reply-To: <20201007153055.28820-1-ophirmu@nvidia.com>

From: Ophir Munk <ophirmu@mellanox.com>

This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 app/test-pmd/cmdline_flow.c                 |  3 +-
 app/test-pmd/csumonly.c                     | 81 +++++++++--------------------
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  6 +--
 lib/librte_net/rte_vxlan.h                  |  1 +
 4 files changed, 31 insertions(+), 60 deletions(-)

diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 6e04d53..761ac5a 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -23,6 +23,7 @@
 #include <cmdline_parse_num.h>
 #include <rte_flow.h>
 #include <rte_hexdump.h>
+#include <rte_vxlan.h>
 
 #include "testpmd.h"
 
@@ -421,7 +422,7 @@ struct vxlan_encap_conf vxlan_encap_conf = {
 	.select_tos_ttl = 0,
 	.vni = "\x00\x00\x00",
 	.udp_src = 0,
-	.udp_dst = RTE_BE16(4789),
+	.udp_dst = RTE_BE16(RTE_VXLAN_DEFAULT_PORT),
 	.ipv4_src = RTE_IPV4(127, 0, 0, 1),
 	.ipv4_dst = RTE_IPV4(255, 255, 255, 255),
 	.ipv6_src = "\x00\x00\x00\x00\x00\x00\x00\x00"
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index a9f33c6..8f2f840 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -63,7 +63,7 @@
 #define _htons(x) (x)
 #endif
 
-uint16_t vxlan_gpe_udp_port = 4790;
+uint16_t vxlan_gpe_udp_port = RTE_VXLAN_GPE_DEFAULT_PORT;
 uint16_t geneve_udp_port = RTE_GENEVE_DEFAULT_PORT;
 
 /* structure that caches offload info for the current packet */
@@ -181,6 +181,17 @@ parse_ethernet(struct rte_ether_hdr *eth_hdr, struct testpmd_offload_info *info)
 	}
 }
 
+/* Fill in outer layers length */
+static void
+update_tunnel_outer(struct testpmd_offload_info *info)
+{
+	info->is_tunnel = 1;
+	info->outer_ethertype = info->ethertype;
+	info->outer_l2_len = info->l2_len;
+	info->outer_l3_len = info->l3_len;
+	info->outer_l4_proto = info->l4_proto;
+}
+
 /*
  * Parse a GTP protocol header.
  * No optional fields and next extension header type.
@@ -201,11 +212,7 @@ parse_gtp(struct rte_udp_hdr *udp_hdr,
 	    udp_hdr->dst_port != _htons(RTE_GTPU_UDP_PORT))
 		return;
 
-	info->is_tunnel = 1;
-	info->outer_ethertype = info->ethertype;
-	info->outer_l2_len = info->l2_len;
-	info->outer_l3_len = info->l3_len;
-	info->outer_l4_proto = info->l4_proto;
+	update_tunnel_outer(info);
 	info->l2_len = 0;
 
 	gtp_hdr = (struct rte_gtp_hdr *)((char *)udp_hdr +
@@ -250,18 +257,15 @@ parse_vxlan(struct rte_udp_hdr *udp_hdr,
 {
 	struct rte_ether_hdr *eth_hdr;
 
-	/* check udp destination port, 4789 is the default vxlan port
-	 * (rfc7348) or that the rx offload flag is set (i40e only
-	 * currently) */
-	if (udp_hdr->dst_port != _htons(4789) &&
+	/* check udp destination port, RTE_VXLAN_DEFAULT_PORT (4789) is the
+	 * default vxlan port (rfc7348) or that the rx offload flag is set
+	 * (i40e only currently)
+	 */
+	if (udp_hdr->dst_port != _htons(RTE_VXLAN_DEFAULT_PORT) &&
 		RTE_ETH_IS_TUNNEL_PKT(pkt_type) == 0)
 		return;
 
-	info->is_tunnel = 1;
-	info->outer_ethertype = info->ethertype;
-	info->outer_l2_len = info->l2_len;
-	info->outer_l3_len = info->l3_len;
-	info->outer_l4_proto = info->l4_proto;
+	update_tunnel_outer(info);
 
 	eth_hdr = (struct rte_ether_hdr *)((char *)udp_hdr +
 		sizeof(struct rte_udp_hdr) +
@@ -291,11 +295,7 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 
 	if (!vxlan_gpe_hdr->proto || vxlan_gpe_hdr->proto ==
 	    RTE_VXLAN_GPE_TYPE_IPV4) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		ipv4_hdr = (struct rte_ipv4_hdr *)((char *)vxlan_gpe_hdr +
 			   vxlan_gpe_len);
@@ -305,11 +305,7 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 		info->l2_len = 0;
 
 	} else if (vxlan_gpe_hdr->proto == RTE_VXLAN_GPE_TYPE_IPV6) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		ipv6_hdr = (struct rte_ipv6_hdr *)((char *)vxlan_gpe_hdr +
 			   vxlan_gpe_len);
@@ -319,11 +315,7 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 		info->l2_len = 0;
 
 	} else if (vxlan_gpe_hdr->proto == RTE_VXLAN_GPE_TYPE_ETH) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		eth_hdr = (struct rte_ether_hdr *)((char *)vxlan_gpe_hdr +
 			  vxlan_gpe_len);
@@ -335,17 +327,6 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 	info->l2_len += RTE_ETHER_VXLAN_GPE_HLEN;
 }
 
-/* Fill in outer layers length */
-static void
-update_tunnel_outer(struct testpmd_offload_info *info)
-{
-	info->is_tunnel = 1;
-	info->outer_ethertype = info->ethertype;
-	info->outer_l2_len = info->l2_len;
-	info->outer_l3_len = info->l3_len;
-	info->outer_l4_proto = info->l4_proto;
-}
-
 /* Parse a geneve header */
 static void
 parse_geneve(struct rte_udp_hdr *udp_hdr,
@@ -412,11 +393,7 @@ parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
 		gre_len += GRE_EXT_LEN;
 
 	if (gre_hdr->proto == _htons(RTE_ETHER_TYPE_IPV4)) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		ipv4_hdr = (struct rte_ipv4_hdr *)((char *)gre_hdr + gre_len);
 
@@ -425,11 +402,7 @@ parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
 		info->l2_len = 0;
 
 	} else if (gre_hdr->proto == _htons(RTE_ETHER_TYPE_IPV6)) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		ipv6_hdr = (struct rte_ipv6_hdr *)((char *)gre_hdr + gre_len);
 
@@ -438,11 +411,7 @@ parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
 		info->l2_len = 0;
 
 	} else if (gre_hdr->proto == _htons(RTE_ETHER_TYPE_TEB)) {
-		info->is_tunnel = 1;
-		info->outer_ethertype = info->ethertype;
-		info->outer_l2_len = info->l2_len;
-		info->outer_l3_len = info->l3_len;
-		info->outer_l4_proto = info->l4_proto;
+		update_tunnel_outer(info);
 
 		eth_hdr = (struct rte_ether_hdr *)((char *)gre_hdr + gre_len);
 
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 72bdb1b..bc6f2fd 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1135,11 +1135,11 @@ Where:
 * ``ip|udp|tcp|sctp`` always relate to  the inner layer.
 
 * ``outer-ip`` relates to the outer IP layer (only for IPv4) in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, gre and ipip are
+  as a tunnel packet by the forwarding engine (geneve, gre, gtp, ipip, vxlan and vxlan-gpe are
   supported). See also the ``csum parse-tunnel`` command.
 
 * ``outer-udp`` relates to the outer UDP layer in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe are
+  as a tunnel packet by the forwarding engine (geneve, gtp, vxlan and vxlan-gpe are
   supported). See also the ``csum parse-tunnel`` command.
 
 .. note::
@@ -1199,7 +1199,7 @@ engine::
    testpmd> csum parse-tunnel (on|off) (tx_port_id)
 
 If enabled, the csum forward engine will try to recognize supported
-tunnel headers (vxlan, gre, ipip).
+tunnel headers (ipip, geneve, gtp, gre, vxlan, vxlan-gpe).
 
 If disabled, treat tunnel packets as non-tunneled packets (a inner
 header is handled as a packet payload).
diff --git a/lib/librte_net/rte_vxlan.h b/lib/librte_net/rte_vxlan.h
index c23c10c..2ad6061 100644
--- a/lib/librte_net/rte_vxlan.h
+++ b/lib/librte_net/rte_vxlan.h
@@ -22,6 +22,7 @@ extern "C" {
 
 /** VXLAN default port. */
 #define RTE_VXLAN_DEFAULT_PORT 4789
+#define RTE_VXLAN_GPE_DEFAULT_PORT 4790
 
 /**
  * VXLAN protocol header.
-- 
2.8.4


  parent reply	other threads:[~2020-10-07 15:32 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29  8:29 [dpdk-dev] [PATCH v1 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02   ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-14 17:27       ` Ferruh Yigit
2020-09-15 12:53       ` [dpdk-dev] [PATCH v3 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:17           ` [dpdk-dev] [PATCH v4 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:56               ` Ophir Munk
2020-09-17 12:23               ` Olivier Matz
2020-09-18 14:21                 ` Ophir Munk
2020-09-18 14:17               ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 14:52                     ` Ophir Munk
2020-10-07 16:25                       ` Ferruh Yigit
2020-10-08  8:44                         ` Ophir Munk
2020-10-08 13:37                           ` Ferruh Yigit
2020-10-07 15:30                   ` [dpdk-dev] [PATCH v6 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                       ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-09 12:49                         ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-07 15:30                     ` Ophir Munk [this message]
2020-10-07 16:05                       ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: tunnel parsing protocols cleanup Ferruh Yigit
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 10:56                     ` Ophir Munk
2020-10-06 14:58                 ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:43                   ` Ophir Munk
2020-10-07 16:00                     ` Ferruh Yigit
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-14 17:31       ` Ferruh Yigit
2020-09-15  8:46         ` Ophir Munk
2020-09-15 11:07           ` Ferruh Yigit
2020-09-15 12:59             ` Ophir Munk
2020-09-15 13:19               ` Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-31  6:40     ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201007153055.28820-4-ophirmu@nvidia.com \
    --to=ophirmu@nvidia.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=olivier.matz@6wind.com \
    --cc=ophirmu@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.