All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ophir Munk <ophirmu@nvidia.com>
To: dev@dpdk.org, Ferruh Yigit <ferruh.yigit@intel.com>,
	Olivier Matz <olivier.matz@6wind.com>,
	Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Jingjing Wu <jingjing.wu@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>
Cc: Ophir Munk <ophirmu@mellanox.com>
Subject: [dpdk-dev] [PATCH v7 1/3] app/testpmd: add GENEVE parsing
Date: Thu,  8 Oct 2020 20:16:54 +0000	[thread overview]
Message-ID: <20201008201656.19865-2-ophirmu@nvidia.com> (raw)
In-Reply-To: <20201008201656.19865-1-ophirmu@nvidia.com>

From: Ophir Munk <ophirmu@mellanox.com>

GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols.  In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 app/test-pmd/csumonly.c                     | 70 ++++++++++++++++++++++++++++-
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  6 +--
 lib/librte_net/meson.build                  |  3 +-
 lib/librte_net/rte_geneve.h                 | 66 +++++++++++++++++++++++++++
 5 files changed, 141 insertions(+), 5 deletions(-)
 create mode 100644 lib/librte_net/rte_geneve.h

diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 7ece398..a9f33c6 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -43,6 +43,7 @@
 #include <rte_flow.h>
 #include <rte_gro.h>
 #include <rte_gso.h>
+#include <rte_geneve.h>
 
 #include "testpmd.h"
 
@@ -63,6 +64,7 @@
 #endif
 
 uint16_t vxlan_gpe_udp_port = 4790;
+uint16_t geneve_udp_port = RTE_GENEVE_DEFAULT_PORT;
 
 /* structure that caches offload info for the current packet */
 struct testpmd_offload_info {
@@ -333,6 +335,64 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 	info->l2_len += RTE_ETHER_VXLAN_GPE_HLEN;
 }
 
+/* Fill in outer layers length */
+static void
+update_tunnel_outer(struct testpmd_offload_info *info)
+{
+	info->is_tunnel = 1;
+	info->outer_ethertype = info->ethertype;
+	info->outer_l2_len = info->l2_len;
+	info->outer_l3_len = info->l3_len;
+	info->outer_l4_proto = info->l4_proto;
+}
+
+/* Parse a geneve header */
+static void
+parse_geneve(struct rte_udp_hdr *udp_hdr,
+	    struct testpmd_offload_info *info)
+{
+	struct rte_ether_hdr *eth_hdr;
+	struct rte_ipv4_hdr *ipv4_hdr;
+	struct rte_ipv6_hdr *ipv6_hdr;
+	struct rte_geneve_hdr *geneve_hdr;
+	uint16_t geneve_len;
+
+	/* Check udp destination port. */
+	if (udp_hdr->dst_port != _htons(geneve_udp_port))
+		return;
+
+	geneve_hdr = (struct rte_geneve_hdr *)((char *)udp_hdr +
+				sizeof(struct rte_udp_hdr));
+	geneve_len = sizeof(struct rte_geneve_hdr) + geneve_hdr->opt_len * 4;
+	if (!geneve_hdr->proto || geneve_hdr->proto ==
+	    _htons(RTE_ETHER_TYPE_IPV4)) {
+		update_tunnel_outer(info);
+		ipv4_hdr = (struct rte_ipv4_hdr *)((char *)geneve_hdr +
+			   geneve_len);
+		parse_ipv4(ipv4_hdr, info);
+		info->ethertype = _htons(RTE_ETHER_TYPE_IPV4);
+		info->l2_len = 0;
+	} else if (geneve_hdr->proto == _htons(RTE_ETHER_TYPE_IPV6)) {
+		update_tunnel_outer(info);
+		ipv6_hdr = (struct rte_ipv6_hdr *)((char *)geneve_hdr +
+			   geneve_len);
+		info->ethertype = _htons(RTE_ETHER_TYPE_IPV6);
+		parse_ipv6(ipv6_hdr, info);
+		info->l2_len = 0;
+
+	} else if (geneve_hdr->proto == _htons(RTE_GENEVE_TYPE_ETH)) {
+		update_tunnel_outer(info);
+		eth_hdr = (struct rte_ether_hdr *)((char *)geneve_hdr +
+			  geneve_len);
+		parse_ethernet(eth_hdr, info);
+	} else
+		return;
+
+	info->l2_len +=
+		(sizeof(struct rte_udp_hdr) + sizeof(struct rte_geneve_hdr) +
+		((struct rte_geneve_hdr *)geneve_hdr)->opt_len * 4);
+}
+
 /* Parse a gre header */
 static void
 parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
@@ -865,9 +925,17 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
 				}
 				parse_vxlan(udp_hdr, &info,
 					    m->packet_type);
-				if (info.is_tunnel)
+				if (info.is_tunnel) {
 					tx_ol_flags |=
 						PKT_TX_TUNNEL_VXLAN;
+					goto tunnel_update;
+				}
+				parse_geneve(udp_hdr, &info);
+				if (info.is_tunnel) {
+					tx_ol_flags |=
+						PKT_TX_TUNNEL_GENEVE;
+					goto tunnel_update;
+				}
 			} else if (info.l4_proto == IPPROTO_GRE) {
 				struct simple_gre_hdr *gre_hdr;
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index c7e7e41..14aae7c 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -452,6 +452,7 @@ extern struct fwd_lcore  **fwd_lcores;
 extern struct fwd_stream **fwd_streams;
 
 extern uint16_t vxlan_gpe_udp_port; /**< UDP port of tunnel VXLAN-GPE. */
+extern uint16_t geneve_udp_port; /**< UDP port of tunnel GENEVE. */
 
 extern portid_t nb_peer_eth_addrs; /**< Number of peer ethernet addresses. */
 extern struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 72bdb1b..c448e2d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1135,11 +1135,11 @@ Where:
 * ``ip|udp|tcp|sctp`` always relate to  the inner layer.
 
 * ``outer-ip`` relates to the outer IP layer (only for IPv4) in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, gre and ipip are
+  as a tunnel packet by the forwarding engine (vxlan, gre, ipip and geneve are
   supported). See also the ``csum parse-tunnel`` command.
 
 * ``outer-udp`` relates to the outer UDP layer in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe are
+  as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe, geneve are
   supported). See also the ``csum parse-tunnel`` command.
 
 .. note::
@@ -1199,7 +1199,7 @@ engine::
    testpmd> csum parse-tunnel (on|off) (tx_port_id)
 
 If enabled, the csum forward engine will try to recognize supported
-tunnel headers (vxlan, gre, ipip).
+tunnel headers (vxlan, gre, ipip, geneve).
 
 If disabled, treat tunnel packets as non-tunneled packets (a inner
 header is handled as a packet payload).
diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
index 24ed825..52d3a97 100644
--- a/lib/librte_net/meson.build
+++ b/lib/librte_net/meson.build
@@ -16,7 +16,8 @@ headers = files('rte_ip.h',
 	'rte_net_crc.h',
 	'rte_mpls.h',
 	'rte_higig.h',
-	'rte_ecpri.h')
+	'rte_ecpri.h',
+	'rte_geneve.h')
 
 sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
 deps += ['mbuf']
diff --git a/lib/librte_net/rte_geneve.h b/lib/librte_net/rte_geneve.h
new file mode 100644
index 0000000..bb67724
--- /dev/null
+++ b/lib/librte_net/rte_geneve.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef _RTE_GENEVE_H_
+#define _RTE_GENEVE_H_
+
+/**
+ * @file
+ *
+ * GENEVE-related definitions
+ */
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** GENEVE default port. */
+#define RTE_GENEVE_DEFAULT_PORT 6081
+
+/**
+ * GENEVE protocol header. (draft-ietf-nvo3-geneve-09)
+ * Contains:
+ * 2-bits version (must be 0).
+ * 6-bits option length in four byte multiples, not including the eight
+ *	bytes of the fixed tunnel header.
+ * 1-bit control packet.
+ * 1-bit critical options in packet.
+ * 6-bits reserved
+ * 16-bits Protocol Type. The protocol data unit after the Geneve header
+ *	following the EtherType convention. Ethernet itself is represented by
+ *	the value 0x6558.
+ * 24-bits Virtual Network Identifier (VNI). Virtual network unique identified.
+ * 8-bits reserved bits (must be 0 on transmission and ignored on receipt).
+ * More-bits (optional) variable length options.
+ */
+__extension__
+struct rte_geneve_hdr {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint8_t ver:2;		/**< Version. */
+	uint8_t opt_len:6;	/**< Options length. */
+	uint8_t oam:1;		/**< Control packet. */
+	uint8_t critical:1;	/**< Critical packet. */
+	uint8_t reserved1:6;	/**< Reserved. */
+#else
+	uint8_t opt_len:6;	/**< Options length. */
+	uint8_t ver:2;		/**< Version. */
+	uint8_t reserved1:6;	/**< Reserved. */
+	uint8_t critical:1;	/**< Critical packet. */
+	uint8_t oam:1;		/**< Control packet. */
+#endif
+	rte_be16_t proto;	/**< Protocol type. */
+	uint8_t vni[3];		/**< Virtual network identifier. */
+	uint8_t reserved2;	/**< Reserved. */
+	uint32_t opts[];	/**< Variable length options. */
+} __rte_packed;
+
+/* GENEVE ETH next protocol types */
+#define RTE_GENEVE_TYPE_ETH	0x6558 /**< Ethernet Protocol. */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* RTE_GENEVE_H_ */
-- 
2.8.4


  reply	other threads:[~2020-10-08 20:17 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29  8:29 [dpdk-dev] [PATCH v1 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02   ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-14 17:27       ` Ferruh Yigit
2020-09-15 12:53       ` [dpdk-dev] [PATCH v3 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:17           ` [dpdk-dev] [PATCH v4 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:56               ` Ophir Munk
2020-09-17 12:23               ` Olivier Matz
2020-09-18 14:21                 ` Ophir Munk
2020-09-18 14:17               ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 14:52                     ` Ophir Munk
2020-10-07 16:25                       ` Ferruh Yigit
2020-10-08  8:44                         ` Ophir Munk
2020-10-08 13:37                           ` Ferruh Yigit
2020-10-07 15:30                   ` [dpdk-dev] [PATCH v6 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                       ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-08 20:16                         ` Ophir Munk [this message]
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-09 12:49                         ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-07 16:05                       ` Ferruh Yigit
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 10:56                     ` Ophir Munk
2020-10-06 14:58                 ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:43                   ` Ophir Munk
2020-10-07 16:00                     ` Ferruh Yigit
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-14 17:31       ` Ferruh Yigit
2020-09-15  8:46         ` Ophir Munk
2020-09-15 11:07           ` Ferruh Yigit
2020-09-15 12:59             ` Ophir Munk
2020-09-15 13:19               ` Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-31  6:40     ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201008201656.19865-2-ophirmu@nvidia.com \
    --to=ophirmu@nvidia.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=olivier.matz@6wind.com \
    --cc=ophirmu@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.