From: David Woodhouse <dwmw2@infradead.org> To: x86@kernel.org Cc: kvm <kvm@vger.kernel.org>, iommu@lists.linux-foundation.org, joro@8bytes.org, Thomas Gleixner <tglx@linutronix.de>, Paolo Bonzini <pbonzini@redhat.com>, linux-kernel <linux-kernel@vger.kernel.org>, linux-hyperv@vger.kernel.org, maz@misterjones.org, Dexuan Cui <decui@microsoft.com> Subject: [PATCH v3 04/35] x86/devicetree: Fix the ioapic interrupt type table Date: Sat, 24 Oct 2020 22:35:04 +0100 [thread overview] Message-ID: <20201024213535.443185-5-dwmw2@infradead.org> (raw) In-Reply-To: <20201024213535.443185-1-dwmw2@infradead.org> From: Thomas Gleixner <tglx@linutronix.de> The ioapic interrupt type table is wrong as it assumes that polarity in IO/APIC context means active high when set. But the IO/APIC polarity is working the other way round. This works because the ordering of the entries is consistent with the device tree and the type information is not used by the IO/APIC interrupt chip. The whole trigger and polarity business of IO/APIC is misleading and the corresponding constants which are defined as 0/1 are not used consistently and are going to be removed. Rename the type table members to 'is_level' and 'active_low' and adjust the type information for consistency sake. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> --- arch/x86/kernel/devicetree.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index ddffd80f5c52..6a4cb71c2498 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -184,31 +184,31 @@ static unsigned int ioapic_id; struct of_ioapic_type { u32 out_type; - u32 trigger; - u32 polarity; + u32 is_level; + u32 active_low; }; static struct of_ioapic_type of_ioapic_type[] = { { - .out_type = IRQ_TYPE_EDGE_RISING, - .trigger = IOAPIC_EDGE, - .polarity = 1, + .out_type = IRQ_TYPE_EDGE_FALLING, + .is_level = 0, + .active_low = 1, }, { - .out_type = IRQ_TYPE_LEVEL_LOW, - .trigger = IOAPIC_LEVEL, - .polarity = 0, + .out_type = IRQ_TYPE_LEVEL_HIGH, + .is_level = 1, + .active_low = 0, }, { - .out_type = IRQ_TYPE_LEVEL_HIGH, - .trigger = IOAPIC_LEVEL, - .polarity = 1, + .out_type = IRQ_TYPE_LEVEL_LOW, + .is_level = 1, + .active_low = 1, }, { - .out_type = IRQ_TYPE_EDGE_FALLING, - .trigger = IOAPIC_EDGE, - .polarity = 0, + .out_type = IRQ_TYPE_EDGE_RISING, + .is_level = 0, + .active_low = 0, }, }; @@ -228,7 +228,7 @@ static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, return -EINVAL; it = &of_ioapic_type[type_index]; - ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->trigger, it->polarity); + ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->is_level, it->active_low); tmp.devid = mpc_ioapic_id(mp_irqdomain_ioapic_idx(domain)); tmp.ioapic.pin = fwspec->param[0]; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: David Woodhouse <dwmw2@infradead.org> To: x86@kernel.org Cc: linux-hyperv@vger.kernel.org, kvm <kvm@vger.kernel.org>, Dexuan Cui <decui@microsoft.com>, linux-kernel <linux-kernel@vger.kernel.org>, iommu@lists.linux-foundation.org, maz@misterjones.org, Paolo Bonzini <pbonzini@redhat.com>, Thomas Gleixner <tglx@linutronix.de> Subject: [PATCH v3 04/35] x86/devicetree: Fix the ioapic interrupt type table Date: Sat, 24 Oct 2020 22:35:04 +0100 [thread overview] Message-ID: <20201024213535.443185-5-dwmw2@infradead.org> (raw) In-Reply-To: <20201024213535.443185-1-dwmw2@infradead.org> From: Thomas Gleixner <tglx@linutronix.de> The ioapic interrupt type table is wrong as it assumes that polarity in IO/APIC context means active high when set. But the IO/APIC polarity is working the other way round. This works because the ordering of the entries is consistent with the device tree and the type information is not used by the IO/APIC interrupt chip. The whole trigger and polarity business of IO/APIC is misleading and the corresponding constants which are defined as 0/1 are not used consistently and are going to be removed. Rename the type table members to 'is_level' and 'active_low' and adjust the type information for consistency sake. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> --- arch/x86/kernel/devicetree.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index ddffd80f5c52..6a4cb71c2498 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -184,31 +184,31 @@ static unsigned int ioapic_id; struct of_ioapic_type { u32 out_type; - u32 trigger; - u32 polarity; + u32 is_level; + u32 active_low; }; static struct of_ioapic_type of_ioapic_type[] = { { - .out_type = IRQ_TYPE_EDGE_RISING, - .trigger = IOAPIC_EDGE, - .polarity = 1, + .out_type = IRQ_TYPE_EDGE_FALLING, + .is_level = 0, + .active_low = 1, }, { - .out_type = IRQ_TYPE_LEVEL_LOW, - .trigger = IOAPIC_LEVEL, - .polarity = 0, + .out_type = IRQ_TYPE_LEVEL_HIGH, + .is_level = 1, + .active_low = 0, }, { - .out_type = IRQ_TYPE_LEVEL_HIGH, - .trigger = IOAPIC_LEVEL, - .polarity = 1, + .out_type = IRQ_TYPE_LEVEL_LOW, + .is_level = 1, + .active_low = 1, }, { - .out_type = IRQ_TYPE_EDGE_FALLING, - .trigger = IOAPIC_EDGE, - .polarity = 0, + .out_type = IRQ_TYPE_EDGE_RISING, + .is_level = 0, + .active_low = 0, }, }; @@ -228,7 +228,7 @@ static int dt_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, return -EINVAL; it = &of_ioapic_type[type_index]; - ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->trigger, it->polarity); + ioapic_set_alloc_attr(&tmp, NUMA_NO_NODE, it->is_level, it->active_low); tmp.devid = mpc_ioapic_id(mp_irqdomain_ioapic_idx(domain)); tmp.ioapic.pin = fwspec->param[0]; -- 2.26.2 _______________________________________________ iommu mailing list iommu@lists.linux-foundation.org https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-10-24 21:39 UTC|newest] Thread overview: 254+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-07 12:20 [PATCH 0/5] Fix x2apic enablement and allow up to 32768 CPUs without IR where supported David Woodhouse 2020-10-07 12:20 ` [PATCH 1/5] x86/apic: Fix x2apic enablement without interrupt remapping David Woodhouse 2020-10-07 12:20 ` [PATCH 2/5] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse 2020-10-07 12:20 ` [PATCH 3/5] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse 2020-10-08 9:12 ` Peter Zijlstra 2020-10-08 17:05 ` David Woodhouse 2020-10-08 11:41 ` Thomas Gleixner 2020-10-07 12:20 ` [PATCH 4/5] x86/apic: Support 15 bits of APIC ID in IOAPIC/MSI where available David Woodhouse 2020-10-08 11:54 ` Thomas Gleixner 2020-10-08 12:02 ` Thomas Gleixner 2020-10-08 13:00 ` David Woodhouse 2020-10-07 12:20 ` [PATCH 5/5] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse 2020-10-08 12:05 ` Thomas Gleixner 2020-10-08 12:55 ` David Woodhouse 2020-10-08 16:08 ` David Woodhouse 2020-10-08 21:14 ` Thomas Gleixner 2020-10-08 21:39 ` David Woodhouse 2020-10-08 23:27 ` Thomas Gleixner 2020-10-09 6:07 ` David Woodhouse 2020-10-10 10:06 ` David Woodhouse 2020-10-10 11:44 ` Thomas Gleixner 2020-10-10 11:58 ` David Woodhouse 2020-10-11 17:12 ` Thomas Gleixner 2020-10-11 21:15 ` David Woodhouse 2020-10-12 9:33 ` Thomas Gleixner 2020-10-12 16:06 ` David Woodhouse 2020-10-12 18:38 ` Thomas Gleixner 2020-10-12 20:20 ` David Woodhouse 2020-10-12 22:13 ` Thomas Gleixner 2020-10-13 7:52 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 0/9] Remove irq_remapping_get_irq_domain() David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 1/9] genirq/irqdomain: Implement get_name() method on irqchip fwnodes David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 2/9] x86/apic: Add select() method on vector irqdomain David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 3/9] iommu/amd: Implement select() method on remapping irqdomain David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 4/9] iommu/vt-d: " David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 5/9] iommu/hyper-v: " David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 6/9] x86/hpet: Use irq_find_matching_fwspec() to find " David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 7/9] x86/ioapic: " David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 8/9] x86: Kill all traces of irq_remapping_get_irq_domain() David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 8:11 ` [PATCH 9/9] iommu/vt-d: Simplify intel_irq_remapping_select() David Woodhouse 2020-10-13 8:11 ` David Woodhouse 2020-10-13 9:28 ` [PATCH 5/5] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID Thomas Gleixner 2020-10-13 10:15 ` David Woodhouse 2020-10-13 10:46 ` Thomas Gleixner 2020-10-13 10:53 ` David Woodhouse 2020-10-13 11:51 ` David Woodhouse 2020-10-13 12:40 ` Thomas Gleixner 2020-10-08 11:46 ` [PATCH 1/5] x86/apic: Fix x2apic enablement without interrupt remapping Thomas Gleixner 2020-10-09 10:46 ` [PATCH v2 0/8] Fix x2apic enablement and allow up to 32768 CPUs without IR where supported David Woodhouse 2020-10-09 10:46 ` [PATCH v2 1/8] x86/apic: Fix x2apic enablement without interrupt remapping David Woodhouse 2020-10-09 10:46 ` [PATCH v2 2/8] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse 2020-10-09 10:46 ` [PATCH v2 3/8] x86/apic: Always provide irq_compose_msi_msg() method for vector domain David Woodhouse 2020-10-09 10:46 ` [PATCH v2 4/8] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse 2020-10-09 10:46 ` [PATCH v2 5/8] x86/apic: Support 15 bits of APIC ID in MSI where available David Woodhouse 2020-10-09 10:46 ` [PATCH v2 6/8] x86/kvm: Add KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse 2020-10-09 10:46 ` [PATCH v2 7/8] x86/hpet: Move MSI support into hpet.c David Woodhouse 2020-10-09 10:46 ` [PATCH v2 8/8] x86/ioapic: Generate RTE directly from parent irqchip's MSI message David Woodhouse 2020-10-22 21:43 ` Thomas Gleixner 2020-10-22 22:10 ` Thomas Gleixner 2020-10-23 17:04 ` David Woodhouse 2020-10-23 10:10 ` David Woodhouse 2020-10-23 21:28 ` Thomas Gleixner 2020-10-24 8:26 ` David Woodhouse 2020-10-24 8:41 ` David Woodhouse 2020-10-24 9:13 ` Paolo Bonzini 2020-10-24 10:13 ` David Woodhouse 2020-10-24 12:44 ` David Woodhouse 2020-10-24 21:35 ` [PATCH v3 00/35] Fix x2apic enablement and allow more CPUs, clean up I/OAPIC and MSI bitfields David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-24 21:35 ` [PATCH v3 01/35] x86/apic: Fix x2apic enablement without interrupt remapping David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 02/35] x86/msi: Only use high bits of MSI address for DMAR unit David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 03/35] x86/apic/uv: Fix inconsistent destination mode David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` David Woodhouse [this message] 2020-10-24 21:35 ` [PATCH v3 04/35] x86/devicetree: Fix the ioapic interrupt type table David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 05/35] x86/apic: Cleanup delivery mode defines David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 06/35] x86/apic: Replace pointless apic::dest_logical usage David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] x86/apic: Replace pointless apic:: Dest_logical usage tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 07/35] x86/apic: Get rid of apic::dest_logical David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] x86/apic: Get rid of apic:: Dest_logical tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 08/35] x86/apic: Cleanup destination mode David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 09/35] x86/apic: Always provide irq_compose_msi_msg() method for vector domain David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 10/35] x86/hpet: Move MSI support into hpet.c David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 11/35] genirq/msi: Allow shadow declarations of msi_msg::$member David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] genirq/msi: Allow shadow declarations of msi_msg:: $member tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 12/35] x86/msi: Provide msi message shadow structs David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2022-04-06 8:36 ` [PATCH v3 12/35] " Reto Buerki 2022-04-06 8:36 ` Reto Buerki 2022-04-06 8:36 ` [PATCH] x86/msi: Fix msi message data shadow struct Reto Buerki 2022-04-06 8:36 ` Reto Buerki 2022-04-06 22:11 ` Thomas Gleixner 2022-04-06 22:11 ` Thomas Gleixner 2022-04-07 11:06 ` Reto Buerki 2022-04-07 11:06 ` Reto Buerki 2022-04-07 13:24 ` [tip: x86/urgent] " tip-bot2 for Reto Buerki 2022-04-06 22:07 ` [PATCH v3 12/35] x86/msi: Provide msi message shadow structs Thomas Gleixner 2022-04-06 22:07 ` Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 13/35] iommu/intel: Use msi_msg " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 14/35] iommu/amd: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 15/35] PCI: vmd: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-28 20:49 ` Kees Cook 2020-10-28 20:49 ` Kees Cook 2020-10-28 21:13 ` Thomas Gleixner 2020-10-28 21:13 ` Thomas Gleixner 2020-10-28 23:22 ` Kees Cook 2020-10-28 23:22 ` Kees Cook 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 16/35] x86/kvm: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 17/35] x86/pci/xen: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-25 9:49 ` David Laight 2020-10-25 9:49 ` David Laight 2020-10-25 10:26 ` David Woodhouse 2020-10-25 10:26 ` David Woodhouse 2020-10-25 13:20 ` David Laight 2020-10-25 13:20 ` David Laight 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 18/35] x86/msi: Remove msidef.h David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 19/35] x86/io_apic: Cleanup trigger/polarity helpers David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-11-09 23:15 ` Tom Lendacky 2020-11-10 3:30 ` [EXTERNAL] " David Woodhouse 2020-11-10 6:10 ` Borislav Petkov 2020-11-10 14:34 ` Thomas Gleixner 2020-11-10 14:55 ` Tom Lendacky 2020-11-10 15:54 ` Thomas Gleixner 2020-11-10 16:01 ` [EXTERNAL] " David Woodhouse 2020-11-10 16:17 ` Tom Lendacky 2020-11-10 16:33 ` [EXTERNAL] " David Woodhouse 2020-11-10 17:04 ` Tom Lendacky 2020-11-10 17:50 ` Thomas Gleixner 2020-11-10 18:56 ` Thomas Gleixner 2020-11-10 19:21 ` David Woodhouse 2020-11-10 21:01 ` Thomas Gleixner 2020-11-10 21:30 ` David Woodhouse 2020-11-10 22:00 ` Tom Lendacky 2020-11-10 22:48 ` Thomas Gleixner 2020-11-10 23:05 ` Tom Lendacky 2020-11-11 8:16 ` David Woodhouse 2020-11-11 9:46 ` Thomas Gleixner 2020-11-11 10:36 ` David Woodhouse 2020-11-11 12:32 ` David Woodhouse 2020-11-11 20:30 ` Tom Lendacky 2020-11-11 21:19 ` David Woodhouse 2020-11-13 15:14 ` David Woodhouse 2020-11-16 18:02 ` David Woodhouse 2020-11-17 2:00 ` Suravee Suthikulpanit 2020-11-18 10:29 ` Suravee Suthikulpanit 2020-11-18 10:52 ` David Woodhouse 2020-11-18 14:06 ` Thomas Gleixner 2020-11-18 16:51 ` Suravee Suthikulpanit 2020-11-18 17:08 ` David Woodhouse 2020-11-18 20:16 ` [tip: x86/apic] iommu/amd: Fix IOMMU interrupt generation in X2APIC mode tip-bot2 for David Woodhouse 2020-11-11 14:43 ` [PATCH 1/3] iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled David Woodhouse 2020-11-11 14:43 ` [PATCH 2/3] iommu/amd: Fix union of bitfields in intcapxt support David Woodhouse 2020-11-11 22:06 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-11-11 14:43 ` [PATCH 3/3] iommu/amd: Fix IOMMU interrupt generation in X2APIC mode David Woodhouse 2020-11-11 22:06 ` [tip: x86/apic] iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled tip-bot2 for David Woodhouse 2020-11-10 17:47 ` [tip: x86/apic] x86/ioapic: Correct the PCI/ISA trigger type selection tip-bot2 for Thomas Gleixner 2020-11-10 6:31 ` [PATCH v3 19/35] x86/io_apic: Cleanup trigger/polarity helpers Qian Cai 2020-11-10 6:31 ` Qian Cai 2020-11-10 8:59 ` David Woodhouse 2020-11-10 8:59 ` David Woodhouse 2020-11-10 16:26 ` Paolo Bonzini 2020-11-10 16:26 ` Paolo Bonzini 2020-10-24 21:35 ` [PATCH v3 20/35] x86/ioapic: Cleanup IO/APIC route entry structs David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for Thomas Gleixner 2020-10-24 21:35 ` [PATCH v3 21/35] x86/ioapic: Generate RTE directly from parent irqchip's MSI message David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 22/35] genirq/irqdomain: Implement get_name() method on irqchip fwnodes David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-25 9:41 ` Marc Zyngier 2020-10-25 9:41 ` Marc Zyngier 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 23/35] x86/apic: Add select() method on vector irqdomain David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 24/35] iommu/amd: Implement select() method on remapping irqdomain David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 25/35] iommu/vt-d: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 26/35] iommu/hyper-v: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 27/35] x86/hpet: Use irq_find_matching_fwspec() to find " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 28/35] x86/ioapic: " David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 29/35] x86: Kill all traces of irq_remapping_get_irq_domain() David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 30/35] iommu/vt-d: Simplify intel_irq_remapping_select() David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 31/35] x86/ioapic: Handle Extended Destination ID field in RTE David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 32/35] x86/apic: Support 15 bits of APIC ID in MSI where available David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 33/35] iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-24 21:35 ` [PATCH v3 34/35] x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-24 21:35 ` [PATCH v3 35/35] x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected David Woodhouse 2020-10-24 21:35 ` David Woodhouse 2020-10-29 12:15 ` [tip: x86/apic] " tip-bot2 for David Woodhouse 2020-10-25 8:12 ` [PATCH v3 00/35] Fix x2apic enablement and allow more CPUs, clean up I/OAPIC and MSI bitfields David Woodhouse 2020-10-25 8:12 ` David Woodhouse
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201024213535.443185-5-dwmw2@infradead.org \ --to=dwmw2@infradead.org \ --cc=decui@microsoft.com \ --cc=iommu@lists.linux-foundation.org \ --cc=joro@8bytes.org \ --cc=kvm@vger.kernel.org \ --cc=linux-hyperv@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maz@misterjones.org \ --cc=pbonzini@redhat.com \ --cc=tglx@linutronix.de \ --cc=x86@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.