From: Sergio Paracuellos <sergio.paracuellos@gmail.com> To: kishon@ti.com Cc: vkoul@kernel.org, robh+dt@kernel.org, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, devel@driverdev.osuosl.org, neil@brown.name Subject: [PATCH v4 0/4] MT7621 PCIe PHY Date: Sat, 31 Oct 2020 13:22:42 +0100 [thread overview] Message-ID: <20201031122246.16497-1-sergio.paracuellos@gmail.com> (raw) This series adds support for the PCIe PHY found in the Mediatek MT7621 SoC. This is the first attempt to get feedback of what is missing in this driver to be promoted from staging. There is also a 'mt7621-pci' driver which is the controller part which is still in staging and is a client of this phy. Both drivers have been tested together in a gnubee1 board. This series are rebased on the top of linux-next: commit 4e78c578cb98 ("Add linux-next specific files for 20201030") Changes in v4: - Bindings moved from txt to yaml so previous Rob's Reviewed-by is not in the new patch with the yaml file. - 'phy-cells' property means now if phy is dual-ported. - Avoid custom 'xlate' function and properly set registers when the phy is dual ported. - Add use of 'builtin_platform_driver'. - Added a patch including myself as maintainer in the MAINTAINERS file. - Add a patch removing patch from staging to make easier the complete inclusion and avoid possible problems might appear in 'linux-next' if the series are included. Changes in v3: - Recollect Rob's Reviewed-by of bindings. - Make Kishon Vijay suggested changes in v2: (See https://lkml.org/lkml/2019/4/17/53) - Kconfig: * Add depends on COMPILE_TEST * Select REGMAP_MMIO - Make use of 'soc_device_attribute' and 'soc_device_match' - Use regmap mmio API instead of directly 'readl' and 'writel'. - Use 'platform_get_resource' instead of 'of_address_to_resource'. Changes in v2: - Reorder patches to get bindings first in the series. - Don't use child nodes in the device tree. Use #phy-cells=1 instead. - Update driver code with new 'xlate' function for the new device tree. - Minor changes in driver's macros changing some spaces to tabs. Thanks in advance for your time. Best regards, Sergio Paracuellos Sergio Paracuellos (4): dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY phy: ralink: Add PHY driver for MT7621 PCIe PHY MAINTAINERS: add MT7621 PHY PCI maintainer staging: mt7621-pci-phy: remove driver from staging .../devicetree/bindings/phy}/mediatek,mt7621-pci-phy.yaml | 0 MAINTAINERS | 6 ++++++ drivers/phy/ralink/Kconfig | 8 ++++++++ drivers/phy/ralink/Makefile | 1 + .../pci-mt7621-phy.c => phy/ralink/phy-mt7621-pci.c} | 0 drivers/staging/Kconfig | 2 -- drivers/staging/Makefile | 1 - drivers/staging/mt7621-pci-phy/Kconfig | 8 -------- drivers/staging/mt7621-pci-phy/Makefile | 2 -- drivers/staging/mt7621-pci-phy/TODO | 4 ---- 10 files changed, 15 insertions(+), 17 deletions(-) rename {drivers/staging/mt7621-pci-phy => Documentation/devicetree/bindings/phy}/mediatek,mt7621-pci-phy.yaml (100%) rename drivers/{staging/mt7621-pci-phy/pci-mt7621-phy.c => phy/ralink/phy-mt7621-pci.c} (100%) delete mode 100644 drivers/staging/mt7621-pci-phy/Kconfig delete mode 100644 drivers/staging/mt7621-pci-phy/Makefile delete mode 100644 drivers/staging/mt7621-pci-phy/TODO -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sergio Paracuellos <sergio.paracuellos@gmail.com> To: kishon@ti.com Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org, gregkh@linuxfoundation.org, vkoul@kernel.org, robh+dt@kernel.org, neil@brown.name Subject: [PATCH v4 0/4] MT7621 PCIe PHY Date: Sat, 31 Oct 2020 13:22:42 +0100 [thread overview] Message-ID: <20201031122246.16497-1-sergio.paracuellos@gmail.com> (raw) This series adds support for the PCIe PHY found in the Mediatek MT7621 SoC. This is the first attempt to get feedback of what is missing in this driver to be promoted from staging. There is also a 'mt7621-pci' driver which is the controller part which is still in staging and is a client of this phy. Both drivers have been tested together in a gnubee1 board. This series are rebased on the top of linux-next: commit 4e78c578cb98 ("Add linux-next specific files for 20201030") Changes in v4: - Bindings moved from txt to yaml so previous Rob's Reviewed-by is not in the new patch with the yaml file. - 'phy-cells' property means now if phy is dual-ported. - Avoid custom 'xlate' function and properly set registers when the phy is dual ported. - Add use of 'builtin_platform_driver'. - Added a patch including myself as maintainer in the MAINTAINERS file. - Add a patch removing patch from staging to make easier the complete inclusion and avoid possible problems might appear in 'linux-next' if the series are included. Changes in v3: - Recollect Rob's Reviewed-by of bindings. - Make Kishon Vijay suggested changes in v2: (See https://lkml.org/lkml/2019/4/17/53) - Kconfig: * Add depends on COMPILE_TEST * Select REGMAP_MMIO - Make use of 'soc_device_attribute' and 'soc_device_match' - Use regmap mmio API instead of directly 'readl' and 'writel'. - Use 'platform_get_resource' instead of 'of_address_to_resource'. Changes in v2: - Reorder patches to get bindings first in the series. - Don't use child nodes in the device tree. Use #phy-cells=1 instead. - Update driver code with new 'xlate' function for the new device tree. - Minor changes in driver's macros changing some spaces to tabs. Thanks in advance for your time. Best regards, Sergio Paracuellos Sergio Paracuellos (4): dt-bindings: phy: Add binding for Mediatek MT7621 PCIe PHY phy: ralink: Add PHY driver for MT7621 PCIe PHY MAINTAINERS: add MT7621 PHY PCI maintainer staging: mt7621-pci-phy: remove driver from staging .../devicetree/bindings/phy}/mediatek,mt7621-pci-phy.yaml | 0 MAINTAINERS | 6 ++++++ drivers/phy/ralink/Kconfig | 8 ++++++++ drivers/phy/ralink/Makefile | 1 + .../pci-mt7621-phy.c => phy/ralink/phy-mt7621-pci.c} | 0 drivers/staging/Kconfig | 2 -- drivers/staging/Makefile | 1 - drivers/staging/mt7621-pci-phy/Kconfig | 8 -------- drivers/staging/mt7621-pci-phy/Makefile | 2 -- drivers/staging/mt7621-pci-phy/TODO | 4 ---- 10 files changed, 15 insertions(+), 17 deletions(-) rename {drivers/staging/mt7621-pci-phy => Documentation/devicetree/bindings/phy}/mediatek,mt7621-pci-phy.yaml (100%) rename drivers/{staging/mt7621-pci-phy/pci-mt7621-phy.c => phy/ralink/phy-mt7621-pci.c} (100%) delete mode 100644 drivers/staging/mt7621-pci-phy/Kconfig delete mode 100644 drivers/staging/mt7621-pci-phy/Makefile delete mode 100644 drivers/staging/mt7621-pci-phy/TODO -- 2.25.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next reply other threads:[~2020-10-31 12:22 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-31 12:22 Sergio Paracuellos [this message] 2020-10-31 12:22 ` [PATCH v4 0/4] MT7621 PCIe PHY Sergio Paracuellos 2020-10-31 12:22 ` [PATCH v4 1/4] dt-bindings: phy: Add binding for Mediatek " Sergio Paracuellos 2020-10-31 12:22 ` Sergio Paracuellos 2020-11-04 22:30 ` Rob Herring 2020-11-04 22:30 ` Rob Herring 2020-10-31 12:22 ` [PATCH v4 2/4] phy: ralink: Add PHY driver for " Sergio Paracuellos 2020-10-31 12:22 ` Sergio Paracuellos 2020-11-19 5:30 ` Vinod Koul 2020-11-19 5:30 ` Vinod Koul 2020-11-19 6:05 ` Sergio Paracuellos 2020-11-19 6:05 ` Sergio Paracuellos 2020-11-30 12:15 ` Dan Carpenter 2020-11-30 12:15 ` Dan Carpenter 2020-11-30 14:34 ` Sergio Paracuellos 2020-11-30 14:34 ` Sergio Paracuellos 2020-10-31 12:22 ` [PATCH v4 3/4] MAINTAINERS: add MT7621 PHY PCI maintainer Sergio Paracuellos 2020-10-31 12:22 ` Sergio Paracuellos 2020-10-31 12:22 ` [PATCH v4 4/4] staging: mt7621-pci-phy: remove driver from staging Sergio Paracuellos 2020-10-31 12:22 ` Sergio Paracuellos 2020-11-06 9:43 ` Greg KH 2020-11-06 9:43 ` Greg KH 2020-11-10 12:14 ` [PATCH v4 0/4] MT7621 PCIe PHY Sergio Paracuellos 2020-11-10 12:14 ` Sergio Paracuellos
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201031122246.16497-1-sergio.paracuellos@gmail.com \ --to=sergio.paracuellos@gmail.com \ --cc=devel@driverdev.osuosl.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=kishon@ti.com \ --cc=neil@brown.name \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.