From: Faiz Abbas <faiz_abbas@ti.com> To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Cc: <robh+dt@kernel.org>, <nm@ti.com>, <t-kristo@ti.com>, <faiz_abbas@ti.com> Subject: [PATCH 2/3] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Date: Tue, 3 Nov 2020 00:41:19 +0530 [thread overview] Message-ID: <20201102191120.20380-3-faiz_abbas@ti.com> (raw) In-Reply-To: <20201102191120.20380-1-faiz_abbas@ti.com> Similar to the gpio groups in main domain, there is one gpio group in wakeup domain with 2 mdoules instances in it. The gpio group pins out 73 pins (5 banks). Add DT nodes for these 2 gpio module instances. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index eb2a78a53512..5ee64d4ee41f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -107,6 +107,38 @@ ti,interrupt-ranges = <16 960 16>; }; + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42110000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <103>, <104>, <105>, <106>, <107>, <108>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <73>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42100000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <112>, <113>, <114>, <115>, <116>, <117>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <73>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com> To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Cc: nm@ti.com, t-kristo@ti.com, robh+dt@kernel.org, faiz_abbas@ti.com Subject: [PATCH 2/3] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Date: Tue, 3 Nov 2020 00:41:19 +0530 [thread overview] Message-ID: <20201102191120.20380-3-faiz_abbas@ti.com> (raw) In-Reply-To: <20201102191120.20380-1-faiz_abbas@ti.com> Similar to the gpio groups in main domain, there is one gpio group in wakeup domain with 2 mdoules instances in it. The gpio group pins out 73 pins (5 banks). Add DT nodes for these 2 gpio module instances. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index eb2a78a53512..5ee64d4ee41f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -107,6 +107,38 @@ ti,interrupt-ranges = <16 960 16>; }; + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42110000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <103>, <104>, <105>, <106>, <107>, <108>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <73>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42100000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <112>, <113>, <114>, <115>, <116>, <117>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <73>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-02 19:11 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-02 19:11 [PATCH 0/3] Add gpio support for TI's J7200 platform Faiz Abbas 2020-11-02 19:11 ` Faiz Abbas 2020-11-02 19:11 ` [PATCH 1/3] arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain Faiz Abbas 2020-11-02 19:11 ` Faiz Abbas 2020-11-12 16:39 ` Nishanth Menon 2020-11-12 16:39 ` Nishanth Menon 2020-11-13 18:29 ` Sekhar Nori 2020-11-13 18:29 ` Sekhar Nori 2020-11-13 18:40 ` Nishanth Menon 2020-11-13 18:40 ` Nishanth Menon 2020-11-13 19:09 ` Sekhar Nori 2020-11-13 19:09 ` Sekhar Nori 2020-11-13 20:55 ` Nishanth Menon 2020-11-13 20:55 ` Nishanth Menon 2020-11-14 4:15 ` Grygorii Strashko 2020-11-14 4:15 ` Grygorii Strashko 2020-11-14 5:56 ` Sekhar Nori 2020-11-14 5:56 ` Sekhar Nori 2020-11-02 19:11 ` Faiz Abbas [this message] 2020-11-02 19:11 ` [PATCH 2/3] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Faiz Abbas 2020-11-02 19:11 ` [PATCH 3/3] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Faiz Abbas 2020-11-02 19:11 ` Faiz Abbas 2020-11-04 11:40 ` [PATCH 0/3] Add gpio support for TI's J7200 platform Lokesh Vutla 2020-11-04 11:40 ` Lokesh Vutla 2020-11-12 16:42 ` Nishanth Menon 2020-11-12 16:42 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201102191120.20380-3-faiz_abbas@ti.com \ --to=faiz_abbas@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.