[PATCH v2 0/7] J7200: Add PCIe DT nodes to Enable PCIe

[PATCH v2 0/7] J7200: Add PCIe DT nodes to Enable PCIe

[Kishon Vijay Abraham I]

Add DT binding documentation and device tree nodes to enable
PCIe in J7200.

Changes from v1:
*) Renamed "pcie-ctrl" to "syscon" DT node and expanded "syscon" DT
   sub-node
*) Fixed "cdns,max-outbound-regions" in EP mode and removed
   "cdns,max-outbound-regions" for RC mode.
*) Remove patches specific to J721E

V1 of the patch series can be found @:
http://lore.kernel.org/r/20201102101154.13598-1-kishon@ti.com

Kishon Vijay Abraham I (7):
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"
  dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
  arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES
  arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
  arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
  arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

 .../mfd/ti,j721e-system-controller.yaml       |  40 ++++++
 .../bindings/pci/ti,j721e-pci-ep.yaml         |  10 +-
 .../bindings/pci/ti,j721e-pci-host.yaml       |  16 ++-
 .../dts/ti/k3-j7200-common-proc-board.dts     |  38 ++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 118 ++++++++++++++++++
 5 files changed, 217 insertions(+), 5 deletions(-)

-- 
2.17.1

[PATCH v2 0/7] J7200: Add PCIe DT nodes to Enable PCIe

[Kishon Vijay Abraham I]

Add DT binding documentation and device tree nodes to enable
PCIe in J7200.

Changes from v1:
*) Renamed "pcie-ctrl" to "syscon" DT node and expanded "syscon" DT
   sub-node
*) Fixed "cdns,max-outbound-regions" in EP mode and removed
   "cdns,max-outbound-regions" for RC mode.
*) Remove patches specific to J721E

V1 of the patch series can be found @:
http://lore.kernel.org/r/20201102101154.13598-1-kishon@ti.com

Kishon Vijay Abraham I (7):
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"
  dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC
  arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES
  arm64: dts: ti: k3-j7200-main: Add PCIe device tree node
  arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0
  arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

 .../mfd/ti,j721e-system-controller.yaml       |  40 ++++++
 .../bindings/pci/ti,j721e-pci-ep.yaml         |  10 +-
 .../bindings/pci/ti,j721e-pci-host.yaml       |  16 ++-
 .../dts/ti/k3-j7200-common-proc-board.dts     |  38 ++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 118 ++++++++++++++++++
 5 files changed, 217 insertions(+), 5 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

[Kishon Vijay Abraham I]

Add binding documentation for "syscon" which should be a subnode of
the system controller (scm-conf).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 19fcf59fd2fe..0b115b707ab2 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -50,6 +50,38 @@ patternProperties:
       specified in
       Documentation/devicetree/bindings/mux/reg-mux.txt
 
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: |
+      This is the system controller configuration required to configure PCIe
+      mode, lane width and speed.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - ti,j721e-system-controller
+          - const: syscon
+          - const: simple-mfd
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      ranges: true
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+      - ranges
+
 required:
   - compatible
   - reg
@@ -72,5 +104,13 @@ examples:
             compatible = "mmio-mux";
             reg = <0x00004080 0x50>;
         };
+
+        pcie1_ctrl: syscon@4074 {
+            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+            reg = <0x00004074 0x4>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0x4074 0x4074 0x4>;
+        };
     };
 ...
-- 
2.17.1

[PATCH v2 1/7] dt-bindings: mfd: ti, j721e-system-controller.yaml: Document "syscon"

[Kishon Vijay Abraham I]

Add binding documentation for "syscon" which should be a subnode of
the system controller (scm-conf).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 19fcf59fd2fe..0b115b707ab2 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -50,6 +50,38 @@ patternProperties:
       specified in
       Documentation/devicetree/bindings/mux/reg-mux.txt
 
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: |
+      This is the system controller configuration required to configure PCIe
+      mode, lane width and speed.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - ti,j721e-system-controller
+          - const: syscon
+          - const: simple-mfd
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      ranges: true
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+      - ranges
+
 required:
   - compatible
   - reg
@@ -72,5 +104,13 @@ examples:
             compatible = "mmio-mux";
             reg = <0x00004080 0x50>;
         };
+
+        pcie1_ctrl: syscon@4074 {
+            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+            reg = <0x00004074 0x4>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0x4074 0x4074 0x4>;
+        };
     };
 ...
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

[Rob Herring]

On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
> Add binding documentation for "syscon" which should be a subnode of
> the system controller (scm-conf).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> index 19fcf59fd2fe..0b115b707ab2 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> @@ -50,6 +50,38 @@ patternProperties:
>        specified in
>        Documentation/devicetree/bindings/mux/reg-mux.txt
>  
> +  "^syscon@[0-9a-f]+$":
> +    type: object
> +    description: |

Don't need '|' if there's no formatting.

> +      This is the system controller configuration required to configure PCIe
> +      mode, lane width and speed.
> +
> +    properties:
> +      compatible:
> +        items:
> +          - enum:
> +              - ti,j721e-system-controller
> +          - const: syscon
> +          - const: simple-mfd

Humm, then what are this node's sub-nodes? And the same compatible as 
the parent?

> +
> +      reg:
> +        maxItems: 1
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 1
> +
> +      ranges: true
> +
> +    required:
> +      - compatible
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"
> +      - ranges
> +
>  required:
>    - compatible
>    - reg
> @@ -72,5 +104,13 @@ examples:
>              compatible = "mmio-mux";
>              reg = <0x00004080 0x50>;
>          };
> +
> +        pcie1_ctrl: syscon@4074 {
> +            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> +            reg = <0x00004074 0x4>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0x4074 0x4074 0x4>;

Must be packing a bunch of functions into 4 byte region!

> +        };
>      };
>  ...
> -- 
> 2.17.1
> 

Re: [PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

[Rob Herring]

On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
> Add binding documentation for "syscon" which should be a subnode of
> the system controller (scm-conf).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> index 19fcf59fd2fe..0b115b707ab2 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> @@ -50,6 +50,38 @@ patternProperties:
>        specified in
>        Documentation/devicetree/bindings/mux/reg-mux.txt
>  
> +  "^syscon@[0-9a-f]+$":
> +    type: object
> +    description: |

Don't need '|' if there's no formatting.

> +      This is the system controller configuration required to configure PCIe
> +      mode, lane width and speed.
> +
> +    properties:
> +      compatible:
> +        items:
> +          - enum:
> +              - ti,j721e-system-controller
> +          - const: syscon
> +          - const: simple-mfd

Humm, then what are this node's sub-nodes? And the same compatible as 
the parent?

> +
> +      reg:
> +        maxItems: 1
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 1
> +
> +      ranges: true
> +
> +    required:
> +      - compatible
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"
> +      - ranges
> +
>  required:
>    - compatible
>    - reg
> @@ -72,5 +104,13 @@ examples:
>              compatible = "mmio-mux";
>              reg = <0x00004080 0x50>;
>          };
> +
> +        pcie1_ctrl: syscon@4074 {
> +            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> +            reg = <0x00004074 0x4>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0x4074 0x4074 0x4>;

Must be packing a bunch of functions into 4 byte region!

> +        };
>      };
>  ...
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

[Kishon Vijay Abraham I]

Hi Rob,

On 12/11/20 2:58 am, Rob Herring wrote:
> On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
>> Add binding documentation for "syscon" which should be a subnode of
>> the system controller (scm-conf).
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
>>  1 file changed, 40 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> index 19fcf59fd2fe..0b115b707ab2 100644
>> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> @@ -50,6 +50,38 @@ patternProperties:
>>        specified in
>>        Documentation/devicetree/bindings/mux/reg-mux.txt
>>  
>> +  "^syscon@[0-9a-f]+$":
>> +    type: object
>> +    description: |
> 
> Don't need '|' if there's no formatting.

Okay, will fix this.
> 
>> +      This is the system controller configuration required to configure PCIe
>> +      mode, lane width and speed.
>> +
>> +    properties:
>> +      compatible:
>> +        items:
>> +          - enum:
>> +              - ti,j721e-system-controller
>> +          - const: syscon
>> +          - const: simple-mfd
> 
> Humm, then what are this node's sub-nodes? And the same compatible as 
> the parent?
> 

This node doesn't have sub-nodes.

So one is the parent syscon node which has the entire system control
region and then sub-nodes for each of the modules. In this case the PCIe
in system control has only one 4 byte register that has to be configured.

Both the parent node and sub-node are syscon, so given the same
compatible for both.
>> +
>> +      reg:
>> +        maxItems: 1
>> +
>> +      "#address-cells":
>> +        const: 1
>> +
>> +      "#size-cells":
>> +        const: 1
>> +
>> +      ranges: true
>> +
>> +    required:
>> +      - compatible
>> +      - reg
>> +      - "#address-cells"
>> +      - "#size-cells"
>> +      - ranges
>> +
>>  required:
>>    - compatible
>>    - reg
>> @@ -72,5 +104,13 @@ examples:
>>              compatible = "mmio-mux";
>>              reg = <0x00004080 0x50>;
>>          };
>> +
>> +        pcie1_ctrl: syscon@4074 {
>> +            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
>> +            reg = <0x00004074 0x4>;
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            ranges = <0x4074 0x4074 0x4>;
> 
> Must be packing a bunch of functions into 4 byte region!

For the PCIe case, it only has a 4 byte register to be configured. The
other option would be to get phandle to the parent syscon node and then
hard-code the offset in the driver.

Thank You,
Kishon

Re: [PATCH v2 1/7] dt-bindings: mfd: ti, j721e-system-controller.yaml: Document "syscon"

[Kishon Vijay Abraham I]

Hi Rob,

On 12/11/20 2:58 am, Rob Herring wrote:
> On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
>> Add binding documentation for "syscon" which should be a subnode of
>> the system controller (scm-conf).
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
>>  1 file changed, 40 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> index 19fcf59fd2fe..0b115b707ab2 100644
>> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
>> @@ -50,6 +50,38 @@ patternProperties:
>>        specified in
>>        Documentation/devicetree/bindings/mux/reg-mux.txt
>>  
>> +  "^syscon@[0-9a-f]+$":
>> +    type: object
>> +    description: |
> 
> Don't need '|' if there's no formatting.

Okay, will fix this.
> 
>> +      This is the system controller configuration required to configure PCIe
>> +      mode, lane width and speed.
>> +
>> +    properties:
>> +      compatible:
>> +        items:
>> +          - enum:
>> +              - ti,j721e-system-controller
>> +          - const: syscon
>> +          - const: simple-mfd
> 
> Humm, then what are this node's sub-nodes? And the same compatible as 
> the parent?
> 

This node doesn't have sub-nodes.

So one is the parent syscon node which has the entire system control
region and then sub-nodes for each of the modules. In this case the PCIe
in system control has only one 4 byte register that has to be configured.

Both the parent node and sub-node are syscon, so given the same
compatible for both.
>> +
>> +      reg:
>> +        maxItems: 1
>> +
>> +      "#address-cells":
>> +        const: 1
>> +
>> +      "#size-cells":
>> +        const: 1
>> +
>> +      ranges: true
>> +
>> +    required:
>> +      - compatible
>> +      - reg
>> +      - "#address-cells"
>> +      - "#size-cells"
>> +      - ranges
>> +
>>  required:
>>    - compatible
>>    - reg
>> @@ -72,5 +104,13 @@ examples:
>>              compatible = "mmio-mux";
>>              reg = <0x00004080 0x50>;
>>          };
>> +
>> +        pcie1_ctrl: syscon@4074 {
>> +            compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
>> +            reg = <0x00004074 0x4>;
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            ranges = <0x4074 0x4074 0x4>;
> 
> Must be packing a bunch of functions into 4 byte region!

For the PCIe case, it only has a 4 byte register to be configured. The
other option would be to get phandle to the parent syscon node and then
hard-code the offset in the driver.

Thank You,
Kishon

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/7] dt-bindings: mfd: ti,j721e-system-controller.yaml: Document "syscon"

[Rob Herring]

On Wed, Nov 11, 2020 at 11:25 PM Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
> Hi Rob,
>
> On 12/11/20 2:58 am, Rob Herring wrote:
> > On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
> >> Add binding documentation for "syscon" which should be a subnode of
> >> the system controller (scm-conf).
> >>
> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >> ---
> >>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
> >>  1 file changed, 40 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> index 19fcf59fd2fe..0b115b707ab2 100644
> >> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> @@ -50,6 +50,38 @@ patternProperties:
> >>        specified in
> >>        Documentation/devicetree/bindings/mux/reg-mux.txt
> >>
> >> +  "^syscon@[0-9a-f]+$":
> >> +    type: object
> >> +    description: |
> >
> > Don't need '|' if there's no formatting.
>
> Okay, will fix this.
> >
> >> +      This is the system controller configuration required to configure PCIe
> >> +      mode, lane width and speed.
> >> +
> >> +    properties:
> >> +      compatible:
> >> +        items:
> >> +          - enum:
> >> +              - ti,j721e-system-controller
> >> +          - const: syscon
> >> +          - const: simple-mfd
> >
> > Humm, then what are this node's sub-nodes? And the same compatible as
> > the parent?
> >
>
> This node doesn't have sub-nodes.
>
> So one is the parent syscon node which has the entire system control
> region and then sub-nodes for each of the modules. In this case the PCIe
> in system control has only one 4 byte register that has to be configured.
>
> Both the parent node and sub-node are syscon, so given the same
> compatible for both.

'syscon' is just a hint. It doesn't define what any h/w is. IMO, we
never should have added it.

A compatible defines what the programming interface is for the node.
This one should only ever appear more than once if you have multiple
instances of the same block. So different registers, different
compatible. What you have here is just completely broken.

I don't think you even need a child node here. Just have PCIe node
point to the parent with an offset arg.

Rob

Re: [PATCH v2 1/7] dt-bindings: mfd: ti, j721e-system-controller.yaml: Document "syscon"

[Rob Herring]

On Wed, Nov 11, 2020 at 11:25 PM Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
> Hi Rob,
>
> On 12/11/20 2:58 am, Rob Herring wrote:
> > On Mon, Nov 09, 2020 at 10:34:03PM +0530, Kishon Vijay Abraham I wrote:
> >> Add binding documentation for "syscon" which should be a subnode of
> >> the system controller (scm-conf).
> >>
> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >> ---
> >>  .../mfd/ti,j721e-system-controller.yaml       | 40 +++++++++++++++++++
> >>  1 file changed, 40 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> index 19fcf59fd2fe..0b115b707ab2 100644
> >> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> >> @@ -50,6 +50,38 @@ patternProperties:
> >>        specified in
> >>        Documentation/devicetree/bindings/mux/reg-mux.txt
> >>
> >> +  "^syscon@[0-9a-f]+$":
> >> +    type: object
> >> +    description: |
> >
> > Don't need '|' if there's no formatting.
>
> Okay, will fix this.
> >
> >> +      This is the system controller configuration required to configure PCIe
> >> +      mode, lane width and speed.
> >> +
> >> +    properties:
> >> +      compatible:
> >> +        items:
> >> +          - enum:
> >> +              - ti,j721e-system-controller
> >> +          - const: syscon
> >> +          - const: simple-mfd
> >
> > Humm, then what are this node's sub-nodes? And the same compatible as
> > the parent?
> >
>
> This node doesn't have sub-nodes.
>
> So one is the parent syscon node which has the entire system control
> region and then sub-nodes for each of the modules. In this case the PCIe
> in system control has only one 4 byte register that has to be configured.
>
> Both the parent node and sub-node are syscon, so given the same
> compatible for both.

'syscon' is just a hint. It doesn't define what any h/w is. IMO, we
never should have added it.

A compatible defines what the programming interface is for the node.
This one should only ever appear more than once if you have multiple
instances of the same block. So different registers, different
compatible. What you have here is just completely broken.

I don't think you even need a child node here. Just have PCIe node
point to the parent with an offset arg.

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/7] dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC

[Kishon Vijay Abraham I]

Add host mode dt-bindings for TI's J7200 SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pci/ti,j721e-pci-host.yaml          | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index ee7a8eade3f6..ecec36c02883 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -15,8 +15,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ti,j721e-pcie-host
+    oneOf:
+      - description: PCIe controller in J7200
+        items:
+          - const: ti,j7200-pcie-host
+          - const: ti,j721e-pcie-host
+      - description: PCIe controller in J721E
+        items:
+          - const: ti,j721e-pcie-host
 
   reg:
     maxItems: 4
@@ -48,7 +54,11 @@ properties:
     const: 0x104c
 
   device-id:
-    const: 0xb00d
+    oneOf:
+      - items:
+          - const: 0xb00d
+      - items:
+          - const: 0xb00f
 
   msi-map: true
 
-- 
2.17.1

[PATCH v2 2/7] dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC

[Kishon Vijay Abraham I]

Add host mode dt-bindings for TI's J7200 SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pci/ti,j721e-pci-host.yaml          | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index ee7a8eade3f6..ecec36c02883 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -15,8 +15,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ti,j721e-pcie-host
+    oneOf:
+      - description: PCIe controller in J7200
+        items:
+          - const: ti,j7200-pcie-host
+          - const: ti,j721e-pcie-host
+      - description: PCIe controller in J721E
+        items:
+          - const: ti,j721e-pcie-host
 
   reg:
     maxItems: 4
@@ -48,7 +54,11 @@ properties:
     const: 0x104c
 
   device-id:
-    const: 0xb00d
+    oneOf:
+      - items:
+          - const: 0xb00d
+      - items:
+          - const: 0xb00f
 
   msi-map: true
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/7] dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC

[Kishon Vijay Abraham I]

Add PCIe EP mode dt-bindings for TI's J7200 SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/pci/ti,j721e-pci-ep.yaml       | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index 3ae3e1a2d4b0..da8c5b892104 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -15,8 +15,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ti,j721e-pcie-ep
+    oneOf:
+      - description: PCIe EP controller in J7200
+        items:
+          - const: ti,j7200-pcie-ep
+          - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in J721E
+        items:
+          - const: ti,j721e-pcie-ep
 
   reg:
     maxItems: 4
-- 
2.17.1

[PATCH v2 3/7] dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC

[Kishon Vijay Abraham I]

Add PCIe EP mode dt-bindings for TI's J7200 SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/pci/ti,j721e-pci-ep.yaml       | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index 3ae3e1a2d4b0..da8c5b892104 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -15,8 +15,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ti,j721e-pcie-ep
+    oneOf:
+      - description: PCIe EP controller in J7200
+        items:
+          - const: ti,j7200-pcie-ep
+          - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in J721E
+        items:
+          - const: ti,j721e-pcie-ep
 
   reg:
     maxItems: 4
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/7] arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES

[Kishon Vijay Abraham I]

Add dt node for the single instance of WIZ and SERDES module
shared by PCIe, CPSW (SGMII/QSGMII) and USB.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 61 +++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 72d6496e88dd..7668404c178b 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -417,6 +417,67 @@
 		dma-coherent;
 	};
 
+	serdes_refclk: serdes_refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721e-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 292 85>;
+		assigned-clock-parents = <&k3_clks 292 89>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll0_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll1_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_refclk_dig";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&wiz0_pll0_refclk>;
+			clock-names = "refclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	usbss0: cdns-usb@4104000 {
 		compatible = "ti,j721e-usb";
 		reg = <0x00 0x4104000 0x00 0x100>;
-- 
2.17.1

[PATCH v2 4/7] arm64: dts: ti: k3-j7200-main: Add DT for WIZ and SERDES

[Kishon Vijay Abraham I]

Add dt node for the single instance of WIZ and SERDES module
shared by PCIe, CPSW (SGMII/QSGMII) and USB.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 61 +++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 72d6496e88dd..7668404c178b 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -417,6 +417,67 @@
 		dma-coherent;
 	};
 
+	serdes_refclk: serdes_refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721e-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 292 85>;
+		assigned-clock-parents = <&k3_clks 292 89>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll0_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll1_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_refclk_dig";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&wiz0_pll0_refclk>;
+			clock-names = "refclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	usbss0: cdns-usb@4104000 {
 		compatible = "ti,j721e-usb";
 		reg = <0x00 0x4104000 0x00 0x100>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/7] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node

[Kishon Vijay Abraham I]

Add PCIe device tree node (both RC and EP) for the single PCIe
instance present in j7200.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 57 +++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 7668404c178b..38dff212615d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,6 +25,14 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie1_ctrl: syscon@4074 {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x00004074 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x4074 0x4074 0x4>;
+		};
+
 		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
@@ -478,6 +486,55 @@
 		};
 	};
 
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = /bits/ 16 <0x104c>;
+		device-id = /bits/ 16 <0xb00f>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <32>;
+		max-functions = /bits/ 8 <6>;
+		dma-coherent;
+	};
+
 	usbss0: cdns-usb@4104000 {
 		compatible = "ti,j721e-usb";
 		reg = <0x00 0x4104000 0x00 0x100>;
-- 
2.17.1

[PATCH v2 5/7] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node

[Kishon Vijay Abraham I]

Add PCIe device tree node (both RC and EP) for the single PCIe
instance present in j7200.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 57 +++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 7668404c178b..38dff212615d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,6 +25,14 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		pcie1_ctrl: syscon@4074 {
+			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+			reg = <0x00004074 0x4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x4074 0x4074 0x4>;
+		};
+
 		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
 			compatible = "mmio-mux";
 			#mux-control-cells = <1>;
@@ -478,6 +486,55 @@
 		};
 	};
 
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = /bits/ 16 <0x104c>;
+		device-id = /bits/ 16 <0xb00f>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		cdns,max-outbound-regions = <32>;
+		max-functions = /bits/ 8 <6>;
+		dma-coherent;
+	};
+
 	usbss0: cdns-usb@4104000 {
 		compatible = "ti,j721e-usb";
 		reg = <0x00 0x4104000 0x00 0x100>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/7] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> Add PCIe device tree node (both RC and EP) for the single PCIe
> instance present in j7200.
> 

nit: s/j7200/J7200

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

[...]

Re: [PATCH v2 5/7] arm64: dts: ti: k3-j7200-main: Add PCIe device tree node

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> Add PCIe device tree node (both RC and EP) for the single PCIe
> instance present in j7200.
> 

nit: s/j7200/J7200

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

[...]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 6/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

[Kishon Vijay Abraham I]

Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
to PCIe and QSGMII (multi-link SERDES).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../dts/ti/k3-j7200-common-proc-board.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index ef03e7636b66..65a2e5aeb050 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -8,6 +8,7 @@
 #include "k3-j7200-som-p0.dtsi"
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	chosen {
@@ -213,3 +214,25 @@
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
 };
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
-- 
2.17.1

[PATCH v2 6/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

[Kishon Vijay Abraham I]

Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
to PCIe and QSGMII (multi-link SERDES).

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../dts/ti/k3-j7200-common-proc-board.dts     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index ef03e7636b66..65a2e5aeb050 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -8,6 +8,7 @@
 #include "k3-j7200-som-p0.dtsi"
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
 
 / {
 	chosen {
@@ -213,3 +214,25 @@
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
 };
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 6/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
> to PCIe and QSGMII (multi-link SERDES).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../dts/ti/k3-j7200-common-proc-board.dts     | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index ef03e7636b66..65a2e5aeb050 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -8,6 +8,7 @@
>  #include "k3-j7200-som-p0.dtsi"
>  #include <dt-bindings/net/ti-dp83867.h>
>  #include <dt-bindings/mux/ti-serdes.h>
> +#include <dt-bindings/phy/phy.h>
>  
>  / {
>  	chosen {
> @@ -213,3 +214,25 @@
>  	dr_mode = "otg";
>  	maximum-speed = "high-speed";
>  };
> +
> +&serdes_refclk {
> +	clock-frequency = <100000000>;
> +};

Since this is a reference clk from the board, should the entire node be
here instead of in k3-j7200-main.dtsi?

> +
> +&serdes0 {
> +	serdes0_pcie_link: phy@0 {
> +		reg = <0>;
> +		cdns,num-lanes = <2>;
> +		#phy-cells = <0>;
> +		cdns,phy-type = <PHY_TYPE_PCIE>;
> +		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
> +	};
> +
> +	serdes0_qsgmii_link: phy@1 {
> +		reg = <2>;
> +		cdns,num-lanes = <1>;
> +		#phy-cells = <0>;
> +		cdns,phy-type = <PHY_TYPE_QSGMII>;
> +		resets = <&serdes_wiz0 3>;
> +	};
> +};
> 

Re: [PATCH v2 6/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable SERDES0

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> Add sub-nodes to SERDES0 DT node to represent SERDES0 is connected
> to PCIe and QSGMII (multi-link SERDES).
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  .../dts/ti/k3-j7200-common-proc-board.dts     | 23 +++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index ef03e7636b66..65a2e5aeb050 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -8,6 +8,7 @@
>  #include "k3-j7200-som-p0.dtsi"
>  #include <dt-bindings/net/ti-dp83867.h>
>  #include <dt-bindings/mux/ti-serdes.h>
> +#include <dt-bindings/phy/phy.h>
>  
>  / {
>  	chosen {
> @@ -213,3 +214,25 @@
>  	dr_mode = "otg";
>  	maximum-speed = "high-speed";
>  };
> +
> +&serdes_refclk {
> +	clock-frequency = <100000000>;
> +};

Since this is a reference clk from the board, should the entire node be
here instead of in k3-j7200-main.dtsi?

> +
> +&serdes0 {
> +	serdes0_pcie_link: phy@0 {
> +		reg = <0>;
> +		cdns,num-lanes = <2>;
> +		#phy-cells = <0>;
> +		cdns,phy-type = <PHY_TYPE_PCIE>;
> +		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
> +	};
> +
> +	serdes0_qsgmii_link: phy@1 {
> +		reg = <2>;
> +		cdns,num-lanes = <1>;
> +		#phy-cells = <0>;
> +		cdns,phy-type = <PHY_TYPE_QSGMII>;
> +		resets = <&serdes_wiz0 3>;
> +	};
> +};
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

[Kishon Vijay Abraham I]

x2 lane PCIe slot in the common processor board is enabled and connected to
j7200 SOM. Add PCIe DT node in common processor board to reflect the
same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts    | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 65a2e5aeb050..174a55a18522 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/phy/phy.h>
@@ -236,3 +237,17 @@
 		resets = <&serdes_wiz0 3>;
 	};
 };
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
-- 
2.17.1

[PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

[Kishon Vijay Abraham I]

x2 lane PCIe slot in the common processor board is enabled and connected to
j7200 SOM. Add PCIe DT node in common processor board to reflect the
same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts    | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 65a2e5aeb050..174a55a18522 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/phy/phy.h>
@@ -236,3 +237,17 @@
 		resets = <&serdes_wiz0 3>;
 	};
 };
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> x2 lane PCIe slot in the common processor board is enabled and connected to
> j7200 SOM. Add PCIe DT node in common processor board to reflect the
> same.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

>  .../boot/dts/ti/k3-j7200-common-proc-board.dts    | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 65a2e5aeb050..174a55a18522 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "k3-j7200-som-p0.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/net/ti-dp83867.h>
>  #include <dt-bindings/mux/ti-serdes.h>
>  #include <dt-bindings/phy/phy.h>
> @@ -236,3 +237,17 @@
>  		resets = <&serdes_wiz0 3>;
>  	};
>  };
> +
> +&pcie1_rc {
> +	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
> +	phys = <&serdes0_pcie_link>;
> +	phy-names = "pcie-phy";
> +	num-lanes = <2>;
> +};
> +
> +&pcie1_ep {
> +	phys = <&serdes0_pcie_link>;
> +	phy-names = "pcie-phy";
> +	num-lanes = <2>;
> +	status = "disabled";
> +};
> 

Re: [PATCH v2 7/7] arm64: dts: ti: k3-j7200-common-proc-board: Enable PCIe

[Vignesh Raghavendra]

On 11/9/20 10:34 PM, Kishon Vijay Abraham I wrote:
> x2 lane PCIe slot in the common processor board is enabled and connected to
> j7200 SOM. Add PCIe DT node in common processor board to reflect the
> same.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---

Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>

>  .../boot/dts/ti/k3-j7200-common-proc-board.dts    | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 65a2e5aeb050..174a55a18522 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "k3-j7200-som-p0.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/net/ti-dp83867.h>
>  #include <dt-bindings/mux/ti-serdes.h>
>  #include <dt-bindings/phy/phy.h>
> @@ -236,3 +237,17 @@
>  		resets = <&serdes_wiz0 3>;
>  	};
>  };
> +
> +&pcie1_rc {
> +	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
> +	phys = <&serdes0_pcie_link>;
> +	phy-names = "pcie-phy";
> +	num-lanes = <2>;
> +};
> +
> +&pcie1_ep {
> +	phys = <&serdes0_pcie_link>;
> +	phy-names = "pcie-phy";
> +	num-lanes = <2>;
> +	status = "disabled";
> +};
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel