From: Zong Li <zong.li@sifive.com> To: paul.walmsley@sifive.com, palmer@dabbelt.com, sboyd@kernel.org, schwab@linux-m68k.org, pragnesh.patel@openfive.com, aou@eecs.berkeley.edu, mturquette@baylibre.com, yash.shah@sifive.com, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-riscv@lists.infradead.org Cc: Zong Li <zong.li@sifive.com>, Palmer Dabbelt <palmerdabbelt@google.com>, Pragnesh Patel <Pragnesh.patel@sifive.com> Subject: [PATCH v4 2/4] clk: sifive: Use common name for prci configuration Date: Wed, 11 Nov 2020 18:06:06 +0800 [thread overview] Message-ID: <20201111100608.108842-3-zong.li@sifive.com> (raw) In-Reply-To: <20201111100608.108842-1-zong.li@sifive.com> Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This patch is prepared for fu740 support. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> --- arch/riscv/Kconfig.socs | 2 +- drivers/clk/sifive/Kconfig | 6 +++--- drivers/clk/sifive/Makefile | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs index 8a55f6156661..3284d5c291be 100644 --- a/arch/riscv/Kconfig.socs +++ b/arch/riscv/Kconfig.socs @@ -5,7 +5,7 @@ config SOC_SIFIVE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTY select CLK_SIFIVE - select CLK_SIFIVE_FU540_PRCI + select CLK_SIFIVE_PRCI select SIFIVE_PLIC help This enables support for SiFive SoC platform hardware. diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index f3b4eb9cb0f5..ab48cf7e0105 100644 --- a/drivers/clk/sifive/Kconfig +++ b/drivers/clk/sifive/Kconfig @@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE if CLK_SIFIVE -config CLK_SIFIVE_FU540_PRCI - bool "PRCI driver for SiFive FU540 SoCs" +config CLK_SIFIVE_PRCI + bool "PRCI driver for SiFive SoCs" select CLK_ANALOGBITS_WRPLL_CLN28HPC help Supports the Power Reset Clock interface (PRCI) IP block found in - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, + FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, enable this driver. endif diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index 627effe2ece1..fe3e2cb4c4d8 100644 --- a/drivers/clk/sifive/Makefile +++ b/drivers/clk/sifive/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y += sifive-prci.o -obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o -- 2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Zong Li <zong.li@sifive.com> To: paul.walmsley@sifive.com, palmer@dabbelt.com, sboyd@kernel.org, schwab@linux-m68k.org, pragnesh.patel@openfive.com, aou@eecs.berkeley.edu, mturquette@baylibre.com, yash.shah@sifive.com, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-riscv@lists.infradead.org Cc: Palmer Dabbelt <palmerdabbelt@google.com>, Pragnesh Patel <Pragnesh.patel@sifive.com>, Zong Li <zong.li@sifive.com> Subject: [PATCH v4 2/4] clk: sifive: Use common name for prci configuration Date: Wed, 11 Nov 2020 18:06:06 +0800 [thread overview] Message-ID: <20201111100608.108842-3-zong.li@sifive.com> (raw) In-Reply-To: <20201111100608.108842-1-zong.li@sifive.com> Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This patch is prepared for fu740 support. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> --- arch/riscv/Kconfig.socs | 2 +- drivers/clk/sifive/Kconfig | 6 +++--- drivers/clk/sifive/Makefile | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs index 8a55f6156661..3284d5c291be 100644 --- a/arch/riscv/Kconfig.socs +++ b/arch/riscv/Kconfig.socs @@ -5,7 +5,7 @@ config SOC_SIFIVE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTY select CLK_SIFIVE - select CLK_SIFIVE_FU540_PRCI + select CLK_SIFIVE_PRCI select SIFIVE_PLIC help This enables support for SiFive SoC platform hardware. diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index f3b4eb9cb0f5..ab48cf7e0105 100644 --- a/drivers/clk/sifive/Kconfig +++ b/drivers/clk/sifive/Kconfig @@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE if CLK_SIFIVE -config CLK_SIFIVE_FU540_PRCI - bool "PRCI driver for SiFive FU540 SoCs" +config CLK_SIFIVE_PRCI + bool "PRCI driver for SiFive SoCs" select CLK_ANALOGBITS_WRPLL_CLN28HPC help Supports the Power Reset Clock interface (PRCI) IP block found in - FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, + FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, enable this driver. endif diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index 627effe2ece1..fe3e2cb4c4d8 100644 --- a/drivers/clk/sifive/Makefile +++ b/drivers/clk/sifive/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y += sifive-prci.o -obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o +obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o -- 2.29.2 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2020-11-11 10:06 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-11 10:06 [PATCH v4 0/4] clk: add driver for the SiFive FU740 Zong Li 2020-11-11 10:06 ` Zong Li 2020-11-11 10:06 ` [PATCH v4 1/4] clk: sifive: Extract prci core to common base Zong Li 2020-11-11 10:06 ` Zong Li 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-24 18:42 ` kernel test robot 2020-11-24 18:42 ` kernel test robot 2020-11-26 3:04 ` Zong Li 2020-11-26 3:04 ` Zong Li 2020-11-11 10:06 ` Zong Li [this message] 2020-11-11 10:06 ` [PATCH v4 2/4] clk: sifive: Use common name for prci configuration Zong Li 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-23 7:16 ` Zong Li 2020-11-23 7:16 ` Zong Li 2020-11-11 10:06 ` [PATCH v4 3/4] clk: sifive: Add a driver for the SiFive FU740 PRCI IP block Zong Li 2020-11-11 10:06 ` Zong Li 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-23 7:21 ` Zong Li 2020-11-23 7:21 ` Zong Li 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-23 7:30 ` Zong Li 2020-11-23 7:30 ` Zong Li 2020-11-11 10:06 ` [PATCH v4 4/4] clk: sifive: Fix the wrong bit field shift Zong Li 2020-11-11 10:06 ` Zong Li 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-21 1:29 ` Palmer Dabbelt 2020-11-23 7:18 ` Zong Li 2020-11-23 7:18 ` Zong Li
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201111100608.108842-3-zong.li@sifive.com \ --to=zong.li@sifive.com \ --cc=Pragnesh.patel@sifive.com \ --cc=aou@eecs.berkeley.edu \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=mturquette@baylibre.com \ --cc=palmer@dabbelt.com \ --cc=palmerdabbelt@google.com \ --cc=paul.walmsley@sifive.com \ --cc=pragnesh.patel@openfive.com \ --cc=sboyd@kernel.org \ --cc=schwab@linux-m68k.org \ --cc=yash.shah@sifive.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.