Re: [PATCH v4 3/4] clk: sifive: Add a driver for the SiFive FU740 PRCI IP block

[Zong Li <zong.li@sifive.com>]

On Sat, Nov 21, 2020 at 9:29 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Wed, 11 Nov 2020 02:06:07 PST (-0800), zong.li@sifive.com wrote:
> > Add driver code for the SiFive FU740 PRCI IP block. This IP block
> > handles reset and clock control for the SiFive FU740 device and
> > implements SoC-level clock tree controls and dividers.
> >
> > This driver contains bug fixes and contributions from
> > Henry Styles <hes@sifive.com>
> > Erik Danie <erik.danie@sifive.com>
> > Pragnesh Patel <pragnesh.patel@sifive.com>
> >
> > Signed-off-by: Zong Li <zong.li@sifive.com>
> > Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
> > Cc: Henry Styles <hes@sifive.com>
> > Cc: Erik Danie <erik.danie@sifive.com>
> > Cc: Pragnesh Patel <pragnesh.patel@sifive.com>
> > ---
> >  drivers/clk/sifive/Kconfig                    |   4 +-
> >  drivers/clk/sifive/Makefile                   |   1 +
> >  drivers/clk/sifive/fu740-prci.c               | 122 ++++++++++++++++++
> >  drivers/clk/sifive/fu740-prci.h               |  21 +++
> >  drivers/clk/sifive/sifive-prci.c              | 120 +++++++++++++++++
> >  drivers/clk/sifive/sifive-prci.h              |  88 +++++++++++++
> >  include/dt-bindings/clock/sifive-fu740-prci.h |  23 ++++
>
> I don't see the bindings in Documentation, but assuming they're in flight

Yash is working on some DT bindings, but he suggests that I could
integrate PRCI's binding in this patch set, and rename the prci
binding file, so I would add the binding in the next version.


>
> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
>
> Thanks!
>
> >  7 files changed, 377 insertions(+), 2 deletions(-)
> >  create mode 100644 drivers/clk/sifive/fu740-prci.c
> >  create mode 100644 drivers/clk/sifive/fu740-prci.h
> >  create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
> >
> > diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
> > index ab48cf7e0105..1c14eb20c066 100644
> > --- a/drivers/clk/sifive/Kconfig
> > +++ b/drivers/clk/sifive/Kconfig
> > @@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI
> >       select CLK_ANALOGBITS_WRPLL_CLN28HPC
> >       help
> >         Supports the Power Reset Clock interface (PRCI) IP block found in
> > -       FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
> > -       enable this driver.
> > +       FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
> > +       FU740 SoCs, enable this driver.
> >
> >  endif
> > diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
> > index fe3e2cb4c4d8..2c05798e4ba4 100644
> > --- a/drivers/clk/sifive/Makefile
> > +++ b/drivers/clk/sifive/Makefile
> > @@ -2,3 +2,4 @@
> >  obj-y += sifive-prci.o
> >
> >  obj-$(CONFIG_CLK_SIFIVE_PRCI)        += fu540-prci.o
> > +obj-$(CONFIG_CLK_SIFIVE_PRCI)        += fu740-prci.o
> > diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
> > new file mode 100644
> > index 000000000000..3b87e273c3eb
> > --- /dev/null
> > +++ b/drivers/clk/sifive/fu740-prci.c
> > @@ -0,0 +1,122 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2018-2019 SiFive, Inc.
> > + * Wesley Terpstra
> > + * Paul Walmsley
> > + * Zong Li
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/clock/sifive-fu740-prci.h>
> > +#include <linux/module.h>
> > +#include "sifive-prci.h"
> > +
> > +/* PRCI integration data for each WRPLL instance */
> > +
> > +static struct __prci_wrpll_data __prci_corepll_data = {
> > +     .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
> > +     .enable_bypass = sifive_prci_coreclksel_use_hfclk,
> > +     .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
> > +};
> > +
> > +static struct __prci_wrpll_data __prci_ddrpll_data = {
> > +     .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
> > +};
> > +
> > +static struct __prci_wrpll_data __prci_gemgxlpll_data = {
> > +     .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
> > +};
> > +
> > +static struct __prci_wrpll_data __prci_dvfscorepll_data = {
> > +     .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
> > +     .enable_bypass = sifive_prci_corepllsel_use_corepll,
> > +     .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
> > +};
> > +
> > +static struct __prci_wrpll_data __prci_hfpclkpll_data = {
> > +     .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
> > +     .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
> > +     .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
> > +};
> > +
> > +static struct __prci_wrpll_data __prci_cltxpll_data = {
> > +     .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
> > +};
> > +
> > +/* Linux clock framework integration */
> > +
> > +static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
> > +     .set_rate = sifive_prci_wrpll_set_rate,
> > +     .round_rate = sifive_prci_wrpll_round_rate,
> > +     .recalc_rate = sifive_prci_wrpll_recalc_rate,
> > +};
> > +
> > +static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
> > +     .recalc_rate = sifive_prci_wrpll_recalc_rate,
> > +};
> > +
> > +static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
> > +     .recalc_rate = sifive_prci_tlclksel_recalc_rate,
> > +};
> > +
> > +static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
> > +     .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
> > +};
> > +
> > +/* List of clock controls provided by the PRCI */
> > +struct __prci_clock __prci_init_clocks_fu740[] = {
> > +     [PRCI_CLK_COREPLL] = {
> > +             .name = "corepll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_clk_ops,
> > +             .pwd = &__prci_corepll_data,
> > +     },
> > +     [PRCI_CLK_DDRPLL] = {
> > +             .name = "ddrpll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
> > +             .pwd = &__prci_ddrpll_data,
> > +     },
> > +     [PRCI_CLK_GEMGXLPLL] = {
> > +             .name = "gemgxlpll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_clk_ops,
> > +             .pwd = &__prci_gemgxlpll_data,
> > +     },
> > +     [PRCI_CLK_DVFSCOREPLL] = {
> > +             .name = "dvfscorepll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_clk_ops,
> > +             .pwd = &__prci_dvfscorepll_data,
> > +     },
> > +     [PRCI_CLK_HFPCLKPLL] = {
> > +             .name = "hfpclkpll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_clk_ops,
> > +             .pwd = &__prci_hfpclkpll_data,
> > +     },
> > +     [PRCI_CLK_CLTXPLL] = {
> > +             .name = "cltxpll",
> > +             .parent_name = "hfclk",
> > +             .ops = &sifive_fu740_prci_wrpll_clk_ops,
> > +             .pwd = &__prci_cltxpll_data,
> > +     },
> > +     [PRCI_CLK_TLCLK] = {
> > +             .name = "tlclk",
> > +             .parent_name = "corepll",
> > +             .ops = &sifive_fu740_prci_tlclksel_clk_ops,
> > +     },
> > +     [PRCI_CLK_PCLK] = {
> > +             .name = "pclk",
> > +             .parent_name = "hfpclkpll",
> > +             .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
> > +     },
> > +};
> > diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
> > new file mode 100644
> > index 000000000000..13ef971f7764
> > --- /dev/null
> > +++ b/drivers/clk/sifive/fu740-prci.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2020 SiFive, Inc.
> > + * Zong Li
> > + */
> > +
> > +#ifndef __SIFIVE_CLK_FU740_PRCI_H
> > +#define __SIFIVE_CLK_FU740_PRCI_H
> > +
> > +#include "sifive-prci.h"
> > +
> > +#define NUM_CLOCK_FU740      8
> > +
> > +extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
> > +
> > +static const struct prci_clk_desc prci_clk_fu740 = {
> > +     .clks = __prci_init_clocks_fu740,
> > +     .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
> > +};
> > +
> > +#endif /* __SIFIVE_CLK_FU740_PRCI_H */
> > diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
> > index 0ac729eeb71b..4098dbc5881a 100644
> > --- a/drivers/clk/sifive/sifive-prci.c
> > +++ b/drivers/clk/sifive/sifive-prci.c
> > @@ -27,6 +27,7 @@
> >  #include <linux/of_device.h>
> >  #include "sifive-prci.h"
> >  #include "fu540-prci.h"
> > +#include "fu740-prci.h"
> >
> >  /*
> >   * Private functions
> > @@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> >       return div_u64(parent_rate, div);
> >  }
> >
> > +/* HFPCLK clock integration */
> > +
> > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> > +                                                unsigned long parent_rate)
> > +{
> > +     struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
> > +     struct __prci_data *pd = pc->pd;
> > +     u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
> > +
> > +     return div_u64(parent_rate, div + 2);
> > +}
> > +
> >  /*
> >   * Core clock mux control
> >   */
> > @@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
> >       r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);   /* barrier */
> >  }
> >
> > +/**
> > + * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
> > + * FINAL_COREPLL
> > + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
> > + *
> > + * Switch the CORECLK mux to the final COREPLL output clock; return once
> > + * complete.
> > + *
> > + * Context: Any context.  Caller must prevent concurrent changes to the
> > + *          PRCI_CORECLKSEL_OFFSET register.
> > + */
> > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
> > +{
> > +     u32 r;
> > +
> > +     r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
> > +     r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
> > +     __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
> > +
> > +     r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);   /* barrier */
> > +}
> > +
> > +/**
> > + * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
> > + * output DVFS_COREPLL
> > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
> > + *
> > + * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
> > + *
> > + * Context: Any context.  Caller must prevent concurrent changes to the
> > + *          PRCI_COREPLLSEL_OFFSET register.
> > + */
> > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
> > +{
> > +     u32 r;
> > +
> > +     r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> > +     r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
> > +     __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> > +
> > +     r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);   /* barrier */
> > +}
> > +
> > +/**
> > + * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
> > + * output COREPLL
> > + * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
> > + *
> > + * Switch the COREPLL mux to the COREPLL output clock; return once complete.
> > + *
> > + * Context: Any context.  Caller must prevent concurrent changes to the
> > + *          PRCI_COREPLLSEL_OFFSET register.
> > + */
> > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
> > +{
> > +     u32 r;
> > +
> > +     r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> > +     r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
> > +     __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> > +
> > +     r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);   /* barrier */
> > +}
> > +
> > +/**
> > + * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
> > + * output HFCLK
> > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
> > + *
> > + * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
> > + *
> > + * Context: Any context.  Caller must prevent concurrent changes to the
> > + *          PRCI_HFPCLKPLLSEL_OFFSET register.
> > + */
> > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
> > +{
> > +     u32 r;
> > +
> > +     r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> > +     r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> > +     __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> > +
> > +     r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> > +}
> > +
> > +/**
> > + * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
> > + * output HFPCLKPLL
> > + * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
> > + *
> > + * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
> > + *
> > + * Context: Any context.  Caller must prevent concurrent changes to the
> > + *          PRCI_HFPCLKPLLSEL_OFFSET register.
> > + */
> > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
> > +{
> > +     u32 r;
> > +
> > +     r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> > +     r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> > +     __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> > +
> > +     r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> > +}
> > +
> >  /**
> >   * __prci_register_clocks() - register clock controls in the PRCI
> >   * @dev: Linux struct device *
> > @@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device *pdev)
> >
> >  static const struct of_device_id sifive_prci_of_match[] = {
> >       {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
> > +     {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
> >       {}
> >  };
> >
> > diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
> > index 025f717bc053..802fc8fb9c09 100644
> > --- a/drivers/clk/sifive/sifive-prci.h
> > +++ b/drivers/clk/sifive/sifive-prci.h
> > @@ -117,6 +117,87 @@
> >  #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK                    \
> >               (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
> >
> > +/* CLTXPLLCFG0 */
> > +#define PRCI_CLTXPLLCFG0_OFFSET              0x30
> > +#define PRCI_CLTXPLLCFG0_DIVR_SHIFT  0
> > +#define PRCI_CLTXPLLCFG0_DIVR_MASK   (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_DIVF_SHIFT  6
> > +#define PRCI_CLTXPLLCFG0_DIVF_MASK   (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT  15
> > +#define PRCI_CLTXPLLCFG0_DIVQ_MASK   (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
> > +#define PRCI_CLTXPLLCFG0_RANGE_MASK  (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT        24
> > +#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_FSE_SHIFT   25
> > +#define PRCI_CLTXPLLCFG0_FSE_MASK    (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT)
> > +#define PRCI_CLTXPLLCFG0_LOCK_SHIFT  31
> > +#define PRCI_CLTXPLLCFG0_LOCK_MASK   (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT)
> > +
> > +/* CLTXPLLCFG1 */
> > +#define PRCI_CLTXPLLCFG1_OFFSET              0x34
> > +#define PRCI_CLTXPLLCFG1_CKE_SHIFT   31
> > +#define PRCI_CLTXPLLCFG1_CKE_MASK    (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT)
> > +
> > +/* DVFSCOREPLLCFG0 */
> > +#define PRCI_DVFSCOREPLLCFG0_OFFSET  0x38
> > +
> > +/* DVFSCOREPLLCFG1 */
> > +#define PRCI_DVFSCOREPLLCFG1_OFFSET  0x3c
> > +#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT       31
> > +#define PRCI_DVFSCOREPLLCFG1_CKE_MASK        (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
> > +
> > +/* COREPLLSEL */
> > +#define PRCI_COREPLLSEL_OFFSET                       0x40
> > +#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT     0
> > +#define PRCI_COREPLLSEL_COREPLLSEL_MASK                                      \
> > +             (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
> > +
> > +/* HFPCLKPLLCFG0 */
> > +#define PRCI_HFPCLKPLLCFG0_OFFSET            0x50
> > +#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT               0
> > +#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK                                        \
> > +             (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT               6
> > +#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK                                        \
> > +             (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT               15
> > +#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK                                        \
> > +             (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT              18
> > +#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK                                       \
> > +             (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT     24
> > +#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK                                      \
> > +             (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT                25
> > +#define PRCI_HFPCLKPLL_CFG0_FSE_MASK                                 \
> > +             (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
> > +#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT               31
> > +#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK                                        \
> > +             (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
> > +
> > +/* HFPCLKPLLCFG1 */
> > +#define PRCI_HFPCLKPLLCFG1_OFFSET            0x54
> > +#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT         31
> > +#define PRCI_HFPCLKPLLCFG1_CKE_MASK                                  \
> > +             (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
> > +
> > +/* HFPCLKPLLSEL */
> > +#define PRCI_HFPCLKPLLSEL_OFFSET             0x58
> > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
> > +#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK                          \
> > +             (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
> > +
> > +/* HFPCLKPLLDIV */
> > +#define PRCI_HFPCLKPLLDIV_OFFSET             0x5c
> > +
> > +/* PRCIPLL */
> > +#define PRCI_PRCIPLL_OFFSET                  0xe0
> > +
> > +/* PROCMONCFG */
> > +#define PRCI_PROCMONCFG_OFFSET                       0xf0
> > +
> >  /*
> >   * Private structures
> >   */
> > @@ -187,6 +268,11 @@ struct prci_clk_desc {
> >  /* Core clock mux control */
> >  void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
> >  void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
> > +void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
> > +void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
> > +void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd);
> > +void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd);
> > +void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
> >
> >  /* Linux clock framework integration */
> >  long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
> > @@ -197,5 +283,7 @@ unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
> >                                           unsigned long parent_rate);
> >  unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> >                                              unsigned long parent_rate);
> > +unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> > +                                                unsigned long parent_rate);
> >
> >  #endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
> > diff --git a/include/dt-bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h
> > new file mode 100644
> > index 000000000000..cd7706ea5677
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/sifive-fu740-prci.h
> > @@ -0,0 +1,23 @@
> > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> > +/*
> > + * Copyright (C) 2019 SiFive, Inc.
> > + * Wesley Terpstra
> > + * Paul Walmsley
> > + * Zong Li
> > + */
> > +
> > +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> > +#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> > +
> > +/* Clock indexes for use by Device Tree data and the PRCI driver */
> > +
> > +#define PRCI_CLK_COREPLL            0
> > +#define PRCI_CLK_DDRPLL                     1
> > +#define PRCI_CLK_GEMGXLPLL          2
> > +#define PRCI_CLK_DVFSCOREPLL        3
> > +#define PRCI_CLK_HFPCLKPLL          4
> > +#define PRCI_CLK_CLTXPLL            5
> > +#define PRCI_CLK_TLCLK                      6
> > +#define PRCI_CLK_PCLK                       7
> > +
> > +#endif       /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */