From: Timon Baetz <timon.baetz@protonmail.com> To: Krzysztof Kozlowski <krzk@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, MyungJoo Ham <myungjoo.ham@samsung.com>, Chanwoo Choi <cw00.choi@samsung.com>, Lee Jones <lee.jones@linaro.org>, Sebastian Reichel <sre@kernel.org>, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Timon Baetz <timon.baetz@protonmail.com> Subject: [PATCH v6 2/8] regulator: dt-bindings: Document max8997-pmic nodes Date: Wed, 30 Dec 2020 20:52:07 +0000 [thread overview] Message-ID: <20201230205139.1812366-2-timon.baetz@protonmail.com> (raw) In-Reply-To: <20201230205139.1812366-1-timon.baetz@protonmail.com> Add maxim,max8997-battery and maxim,max8997-muic optional nodes. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> --- v6: No change. v5: No change. v4: Make extcon and charger-supply optional. v3: Reorder patch, no change. v2: Add patch. .../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt index 6fe825b8ac1b..faaf2bbf0272 100644 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used: - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used for dvs. The format of the gpio specifier depends in the gpio controller. +Optional nodes: +- charger: Node for configuring the charger driver. + Required properties: + - compatible: "maxim,max8997-battery" + Optional properties: + - extcon: extcon specifier for charging events + - charger-supply: regulator node for charging current + +- muic: Node used only by extcon consumers. + Required properties: + - compatible: "maxim,max8997-muic" + Regulators: The regulators of max8997 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this sub-node should be of the format as listed below. -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Timon Baetz <timon.baetz@protonmail.com> To: Krzysztof Kozlowski <krzk@kernel.org> Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, Timon Baetz <timon.baetz@protonmail.com>, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Rob Herring <robh+dt@kernel.org>, Sebastian Reichel <sre@kernel.org>, Chanwoo Choi <cw00.choi@samsung.com>, MyungJoo Ham <myungjoo.ham@samsung.com>, ~postmarketos/upstreaming@lists.sr.ht, Lee Jones <lee.jones@linaro.org>, linux-arm-kernel@lists.infradead.org, Marek Szyprowski <m.szyprowski@samsung.com> Subject: [PATCH v6 2/8] regulator: dt-bindings: Document max8997-pmic nodes Date: Wed, 30 Dec 2020 20:52:07 +0000 [thread overview] Message-ID: <20201230205139.1812366-2-timon.baetz@protonmail.com> (raw) In-Reply-To: <20201230205139.1812366-1-timon.baetz@protonmail.com> Add maxim,max8997-battery and maxim,max8997-muic optional nodes. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> --- v6: No change. v5: No change. v4: Make extcon and charger-supply optional. v3: Reorder patch, no change. v2: Add patch. .../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt index 6fe825b8ac1b..faaf2bbf0272 100644 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used: - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used for dvs. The format of the gpio specifier depends in the gpio controller. +Optional nodes: +- charger: Node for configuring the charger driver. + Required properties: + - compatible: "maxim,max8997-battery" + Optional properties: + - extcon: extcon specifier for charging events + - charger-supply: regulator node for charging current + +- muic: Node used only by extcon consumers. + Required properties: + - compatible: "maxim,max8997-muic" + Regulators: The regulators of max8997 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this sub-node should be of the format as listed below. -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-12-30 20:53 UTC|newest] Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-30 20:51 [PATCH v6 1/8] extcon: max8997: Add CHGINS and CHGRM interrupt handling Timon Baetz 2020-12-30 20:51 ` Timon Baetz 2020-12-30 20:52 ` Timon Baetz [this message] 2020-12-30 20:52 ` [PATCH v6 2/8] regulator: dt-bindings: Document max8997-pmic nodes Timon Baetz 2021-01-04 13:51 ` Mark Brown 2021-01-04 13:51 ` Mark Brown 2021-01-04 18:18 ` Krzysztof Kozlowski 2021-01-04 18:18 ` Krzysztof Kozlowski 2021-01-04 18:27 ` Mark Brown 2021-01-04 18:27 ` Mark Brown 2021-01-04 18:38 ` Krzysztof Kozlowski 2021-01-04 18:38 ` Krzysztof Kozlowski 2021-01-04 21:24 ` Mark Brown 2021-01-04 21:24 ` Mark Brown 2021-01-05 16:55 ` Krzysztof Kozlowski 2021-01-05 16:55 ` Krzysztof Kozlowski 2021-01-06 14:59 ` Mark Brown 2021-01-06 14:59 ` Mark Brown 2021-01-08 15:16 ` Timon Baetz 2021-01-08 15:16 ` Timon Baetz 2021-01-08 16:16 ` Mark Brown 2021-01-08 16:16 ` Mark Brown 2021-01-15 6:19 ` Timon Baetz 2021-01-15 6:19 ` Timon Baetz 2021-01-15 13:42 ` Mark Brown 2021-01-15 13:42 ` Mark Brown 2021-01-16 8:03 ` Timon Baetz 2021-01-16 8:03 ` Timon Baetz 2021-01-18 12:45 ` Mark Brown 2021-01-18 12:45 ` Mark Brown 2021-01-11 21:50 ` Rob Herring 2021-01-11 21:50 ` Rob Herring 2020-12-30 20:52 ` [PATCH v6 3/8] power: supply: max8997_charger: Set CHARGER current limit Timon Baetz 2020-12-30 20:52 ` Timon Baetz 2020-12-30 23:22 ` kernel test robot 2020-12-30 23:22 ` kernel test robot 2020-12-31 7:19 ` Timon Baetz 2020-12-31 8:23 ` Krzysztof Kozlowski 2020-12-31 8:23 ` Krzysztof Kozlowski 2020-12-31 8:55 ` Krzysztof Kozlowski 2020-12-31 8:55 ` Krzysztof Kozlowski 2021-01-03 1:53 ` Sebastian Reichel 2021-01-03 1:53 ` Sebastian Reichel 2020-12-30 20:52 ` [PATCH v6 4/8] ARM: dts: exynos: Add muic and charger nodes for I9100 Timon Baetz 2020-12-30 20:52 ` Timon Baetz 2020-12-30 20:52 ` [PATCH v6 5/8] ARM: dts: exynos: Add muic and charger nodes for Origen Timon Baetz 2020-12-30 20:52 ` Timon Baetz 2020-12-30 20:52 ` [PATCH v6 6/8] ARM: dts: exynos: Add muic and charger nodes for Trats Timon Baetz 2020-12-30 20:52 ` Timon Baetz 2020-12-30 20:53 ` [PATCH v6 7/8] ARM: dts: exynos: Fix charging regulator voltage and current for I9100 Timon Baetz 2020-12-30 20:53 ` Timon Baetz 2020-12-30 20:53 ` [PATCH v6 8/8] ARM: dts: exynos: Add top-off charging regulator node " Timon Baetz 2020-12-30 20:53 ` Timon Baetz 2021-01-03 16:32 ` (subset) [PATCH v6 1/8] extcon: max8997: Add CHGINS and CHGRM interrupt handling Krzysztof Kozlowski 2021-01-03 16:32 ` Krzysztof Kozlowski 2021-01-03 16:34 ` Krzysztof Kozlowski 2021-01-03 16:34 ` Krzysztof Kozlowski 2021-01-04 10:26 ` Chanwoo Choi 2021-01-04 10:26 ` Chanwoo Choi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201230205139.1812366-2-timon.baetz@protonmail.com \ --to=timon.baetz@protonmail.com \ --cc=broonie@kernel.org \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=krzk@kernel.org \ --cc=lee.jones@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=myungjoo.ham@samsung.com \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ --cc=~postmarketos/upstreaming@lists.sr.ht \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.