From: Amelie Delaunay <amelie.delaunay@foss.st.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-stm32@st-md-mailman.stormreply.com>, Amelie Delaunay <amelie.delaunay@foss.st.com> Subject: [PATCH v2 3/6] phy: stm32: replace regulator_bulk* by multiple regulator_* Date: Tue, 5 Jan 2021 10:05:22 +0100 [thread overview] Message-ID: <20210105090525.23164-4-amelie.delaunay@foss.st.com> (raw) In-Reply-To: <20210105090525.23164-1-amelie.delaunay@foss.st.com> Due to async_schedule_domain call in regulator_bulk_enable, scheduling while atomic bug can raise if regulator_bulk_enable is called under atomic context. To avoid this issue, this patch replaces all regulator_bulk* by regulator_ per regulators. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- drivers/phy/st/phy-stm32-usbphyc.c | 69 ++++++++++++++++++++++-------- 1 file changed, 52 insertions(+), 17 deletions(-) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index c78a2c7947ce..8ef97c8806ff 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -36,13 +36,6 @@ #define MINREV GENMASK(3, 0) #define MAJREV GENMASK(7, 4) -static const char * const supplies_names[] = { - "vdda1v1", /* 1V1 */ - "vdda1v8", /* 1V8 */ -}; - -#define NUM_SUPPLIES ARRAY_SIZE(supplies_names) - #define PLL_LOCK_TIME_US 100 #define PLL_PWR_DOWN_TIME_US 5 #define PLL_FVCO_MHZ 2880 @@ -69,7 +62,8 @@ struct stm32_usbphyc { struct reset_control *rst; struct stm32_usbphyc_phy **phys; int nphys; - struct regulator_bulk_data supplies[NUM_SUPPLIES]; + struct regulator *vdda1v1; + struct regulator *vdda1v8; int switch_setup; }; @@ -83,6 +77,41 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) writel_relaxed(readl_relaxed(reg) & ~bits, reg); } +static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_enable(usbphyc->vdda1v1); + if (ret) + return ret; + + ret = regulator_enable(usbphyc->vdda1v8); + if (ret) + goto vdda1v1_disable; + + return 0; + +vdda1v1_disable: + regulator_disable(usbphyc->vdda1v1); + + return ret; +} + +static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_disable(usbphyc->vdda1v8); + if (ret) + return ret; + + ret = regulator_disable(usbphyc->vdda1v1); + if (ret) + return ret; + + return 0; +} + static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) { @@ -170,7 +199,7 @@ static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) return -EIO; } - return regulator_bulk_disable(NUM_SUPPLIES, usbphyc->supplies); + return stm32_usbphyc_regulators_disable(usbphyc); } static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) @@ -189,7 +218,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) return ret; } - ret = regulator_bulk_enable(NUM_SUPPLIES, usbphyc->supplies); + ret = stm32_usbphyc_regulators_enable(usbphyc); if (ret) return ret; @@ -210,7 +239,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) return 0; reg_disable: - regulator_bulk_disable(NUM_SUPPLIES, usbphyc->supplies); + stm32_usbphyc_regulators_disable(usbphyc); return ret; } @@ -306,7 +335,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) struct device_node *child, *np = dev->of_node; struct phy_provider *phy_provider; u32 version; - int ret, i, port = 0; + int ret, port = 0; usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); if (!usbphyc) @@ -348,13 +377,19 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) goto clk_disable; } - for (i = 0; i < NUM_SUPPLIES; i++) - usbphyc->supplies[i].supply = supplies_names[i]; + usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); + if (IS_ERR(usbphyc->vdda1v1)) { + ret = PTR_ERR(usbphyc->vdda1v1); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret); + goto clk_disable; + } - ret = devm_regulator_bulk_get(dev, NUM_SUPPLIES, usbphyc->supplies); - if (ret) { + usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); + if (IS_ERR(usbphyc->vdda1v8)) { + ret = PTR_ERR(usbphyc->vdda1v8); if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get regulators: %d\n", ret); + dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret); goto clk_disable; } -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@foss.st.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>, Alexandre Torgue <alexandre.torgue@foss.st.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v2 3/6] phy: stm32: replace regulator_bulk* by multiple regulator_* Date: Tue, 5 Jan 2021 10:05:22 +0100 [thread overview] Message-ID: <20210105090525.23164-4-amelie.delaunay@foss.st.com> (raw) In-Reply-To: <20210105090525.23164-1-amelie.delaunay@foss.st.com> Due to async_schedule_domain call in regulator_bulk_enable, scheduling while atomic bug can raise if regulator_bulk_enable is called under atomic context. To avoid this issue, this patch replaces all regulator_bulk* by regulator_ per regulators. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- drivers/phy/st/phy-stm32-usbphyc.c | 69 ++++++++++++++++++++++-------- 1 file changed, 52 insertions(+), 17 deletions(-) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index c78a2c7947ce..8ef97c8806ff 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -36,13 +36,6 @@ #define MINREV GENMASK(3, 0) #define MAJREV GENMASK(7, 4) -static const char * const supplies_names[] = { - "vdda1v1", /* 1V1 */ - "vdda1v8", /* 1V8 */ -}; - -#define NUM_SUPPLIES ARRAY_SIZE(supplies_names) - #define PLL_LOCK_TIME_US 100 #define PLL_PWR_DOWN_TIME_US 5 #define PLL_FVCO_MHZ 2880 @@ -69,7 +62,8 @@ struct stm32_usbphyc { struct reset_control *rst; struct stm32_usbphyc_phy **phys; int nphys; - struct regulator_bulk_data supplies[NUM_SUPPLIES]; + struct regulator *vdda1v1; + struct regulator *vdda1v8; int switch_setup; }; @@ -83,6 +77,41 @@ static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) writel_relaxed(readl_relaxed(reg) & ~bits, reg); } +static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_enable(usbphyc->vdda1v1); + if (ret) + return ret; + + ret = regulator_enable(usbphyc->vdda1v8); + if (ret) + goto vdda1v1_disable; + + return 0; + +vdda1v1_disable: + regulator_disable(usbphyc->vdda1v1); + + return ret; +} + +static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_disable(usbphyc->vdda1v8); + if (ret) + return ret; + + ret = regulator_disable(usbphyc->vdda1v1); + if (ret) + return ret; + + return 0; +} + static void stm32_usbphyc_get_pll_params(u32 clk_rate, struct pll_params *pll_params) { @@ -170,7 +199,7 @@ static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) return -EIO; } - return regulator_bulk_disable(NUM_SUPPLIES, usbphyc->supplies); + return stm32_usbphyc_regulators_disable(usbphyc); } static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) @@ -189,7 +218,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) return ret; } - ret = regulator_bulk_enable(NUM_SUPPLIES, usbphyc->supplies); + ret = stm32_usbphyc_regulators_enable(usbphyc); if (ret) return ret; @@ -210,7 +239,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) return 0; reg_disable: - regulator_bulk_disable(NUM_SUPPLIES, usbphyc->supplies); + stm32_usbphyc_regulators_disable(usbphyc); return ret; } @@ -306,7 +335,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) struct device_node *child, *np = dev->of_node; struct phy_provider *phy_provider; u32 version; - int ret, i, port = 0; + int ret, port = 0; usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); if (!usbphyc) @@ -348,13 +377,19 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) goto clk_disable; } - for (i = 0; i < NUM_SUPPLIES; i++) - usbphyc->supplies[i].supply = supplies_names[i]; + usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); + if (IS_ERR(usbphyc->vdda1v1)) { + ret = PTR_ERR(usbphyc->vdda1v1); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret); + goto clk_disable; + } - ret = devm_regulator_bulk_get(dev, NUM_SUPPLIES, usbphyc->supplies); - if (ret) { + usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); + if (IS_ERR(usbphyc->vdda1v8)) { + ret = PTR_ERR(usbphyc->vdda1v8); if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get regulators: %d\n", ret); + dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret); goto clk_disable; } -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-05 9:07 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-05 9:05 [PATCH v2 0/6] STM32 USBPHYC PLL management rework Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-05 9:05 ` [PATCH v2 1/6] dt-bindings: phy: phy-stm32-usbphyc: move PLL supplies to parent node Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-05 9:05 ` [PATCH v2 2/6] phy: stm32: manage 1v1 and 1v8 supplies at pll activation/deactivation Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay [this message] 2021-01-05 9:05 ` [PATCH v2 3/6] phy: stm32: replace regulator_bulk* by multiple regulator_* Amelie Delaunay 2021-01-05 9:05 ` [PATCH v2 4/6] phy: stm32: ensure pll is disabled before phys creation Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-05 9:05 ` [PATCH v2 5/6] phy: stm32: ensure phy are no more active when removing the driver Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-05 9:05 ` [PATCH v2 6/6] phy: stm32: rework PLL Lock detection Amelie Delaunay 2021-01-05 9:05 ` Amelie Delaunay 2021-01-13 15:10 ` [PATCH v2 0/6] STM32 USBPHYC PLL management rework Vinod Koul 2021-01-13 15:10 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210105090525.23164-4-amelie.delaunay@foss.st.com \ --to=amelie.delaunay@foss.st.com \ --cc=alexandre.torgue@foss.st.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.