* [PATCH V2 0/2] cover-letter bq27xxx: BQ78Z100: Fix Typo @ 2021-02-02 8:48 LI Qingwu 2021-02-02 8:48 ` [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu 2021-02-02 8:48 ` [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 LI Qingwu 0 siblings, 2 replies; 6+ messages in thread From: LI Qingwu @ 2021-02-02 8:48 UTC (permalink / raw) To: sre, robh+dt, dmurphy, pali, krzk, afd, linux-pm, devicetree, linux-kernel Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu PATCH V2: Fix typo of commit comments of previous version. -replace "equippent" with "equipment" LI Qingwu (2): power: supply: bq27xxx: Add support for BQ78Z100 dt-bindings: power: bq27xxx: add bq78z10 .../bindings/power/supply/bq27xxx.yaml | 1 + drivers/power/supply/bq27xxx_battery.c | 46 ++++++++++++++++++- drivers/power/supply/bq27xxx_battery_i2c.c | 2 + include/linux/power/bq27xxx_battery.h | 1 + 4 files changed, 49 insertions(+), 1 deletion(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 2021-02-02 8:48 [PATCH V2 0/2] cover-letter bq27xxx: BQ78Z100: Fix Typo LI Qingwu @ 2021-02-02 8:48 ` LI Qingwu 2021-02-02 9:06 ` Krzysztof Kozlowski 2021-02-02 8:48 ` [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 LI Qingwu 1 sibling, 1 reply; 6+ messages in thread From: LI Qingwu @ 2021-02-02 8:48 UTC (permalink / raw) To: sre, robh+dt, dmurphy, pali, krzk, afd, linux-pm, devicetree, linux-kernel Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu Add support for TI BQ78Z100, I2C interface gas gauge. It provides a fully integrated safety protection, and authentication for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. The patch was tested with BQ78Z100 equipment. Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> --- drivers/power/supply/bq27xxx_battery.c | 46 +++++++++++++++++++++- drivers/power/supply/bq27xxx_battery_i2c.c | 2 + include/linux/power/bq27xxx_battery.h | 1 + 3 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index 315e0909e6a4..c8579ec7a4f8 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -39,6 +39,7 @@ * https://www.ti.com/product/bq27z561 * https://www.ti.com/product/bq28z610 * https://www.ti.com/product/bq34z100-g1 + * https://www.ti.com/product/bq78z100 */ #include <linux/device.h> @@ -497,7 +498,27 @@ static u8 [BQ27XXX_REG_DCAP] = 0x3c, [BQ27XXX_REG_AP] = 0x22, BQ27XXX_DM_REG_ROWS, - }; + }, + bq78z100_regs[BQ27XXX_REG_MAX] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x28, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = INVALID_REG_ADDR, + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = 0x22, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x22, + BQ27XXX_DM_REG_ROWS, +}; static enum power_supply_property bq27000_props[] = { POWER_SUPPLY_PROP_STATUS, @@ -792,6 +813,27 @@ static enum power_supply_property bq34z100_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; +static enum power_supply_property bq78z100_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + struct bq27xxx_dm_reg { u8 subclass_id; u8 offset; @@ -890,6 +932,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = { #define bq27z561_dm_regs 0 #define bq28z610_dm_regs 0 #define bq34z100_dm_regs 0 +#define bq78z100_dm_regs 0 #define BQ27XXX_O_ZERO BIT(0) #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */ @@ -948,6 +991,7 @@ static struct { [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS), [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM), + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS), }; static DEFINE_MUTEX(bq27xxx_list_lock); diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c index eb4f4284982f..46f078350fd3 100644 --- a/drivers/power/supply/bq27xxx_battery_i2c.c +++ b/drivers/power/supply/bq27xxx_battery_i2c.c @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { { "bq27z561", BQ27Z561 }, { "bq28z610", BQ28Z610 }, { "bq34z100", BQ34Z100 }, + { "bq78z100", BQ78Z100 }, {}, }; MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); @@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { { .compatible = "ti,bq27z561" }, { .compatible = "ti,bq28z610" }, { .compatible = "ti,bq34z100" }, + { .compatible = "ti,bq78z100" }, {}, }; MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index 111a40d0d3d5..ac17618043b1 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -33,6 +33,7 @@ enum bq27xxx_chip { BQ27Z561, BQ28Z610, BQ34Z100, + BQ78Z100, }; struct bq27xxx_device_info; -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 2021-02-02 8:48 ` [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu @ 2021-02-02 9:06 ` Krzysztof Kozlowski 0 siblings, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2021-02-02 9:06 UTC (permalink / raw) To: LI Qingwu Cc: sre, robh+dt, dmurphy, pali, afd, linux-pm, devicetree, linux-kernel, grygorii.tertychnyi, andrey.zhizhikin On Tue, Feb 02, 2021 at 08:48:57AM +0000, LI Qingwu wrote: > Add support for TI BQ78Z100, I2C interface gas gauge. > It provides a fully integrated safety protection, > and authentication for 1 to 2-series cell Li-Ion and > Li-Polymer battery packs. > > The patch was tested with BQ78Z100 equipment. > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > --- > drivers/power/supply/bq27xxx_battery.c | 46 +++++++++++++++++++++- > drivers/power/supply/bq27xxx_battery_i2c.c | 2 + > include/linux/power/bq27xxx_battery.h | 1 + > 3 files changed, 48 insertions(+), 1 deletion(-) > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 2021-02-02 8:48 [PATCH V2 0/2] cover-letter bq27xxx: BQ78Z100: Fix Typo LI Qingwu 2021-02-02 8:48 ` [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu @ 2021-02-02 8:48 ` LI Qingwu 2021-02-02 9:08 ` Krzysztof Kozlowski 1 sibling, 1 reply; 6+ messages in thread From: LI Qingwu @ 2021-02-02 8:48 UTC (permalink / raw) To: sre, robh+dt, dmurphy, pali, krzk, afd, linux-pm, devicetree, linux-kernel Cc: grygorii.tertychnyi, andrey.zhizhikin, LI Qingwu Add bindings for TI BQ78Z100. An I2C interface gas gauge. It provides a fully integrated safety protection, and authentication for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> --- Documentation/devicetree/bindings/power/supply/bq27xxx.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml index 45beefccf31a..712e974b28b6 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml @@ -52,6 +52,7 @@ properties: - ti,bq27z561 - ti,bq28z610 - ti,bq34z100 + - ti,bq78z100 reg: maxItems: 1 -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 2021-02-02 8:48 ` [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 LI Qingwu @ 2021-02-02 9:08 ` Krzysztof Kozlowski 2021-02-03 3:49 ` LI Qingwu 0 siblings, 1 reply; 6+ messages in thread From: Krzysztof Kozlowski @ 2021-02-02 9:08 UTC (permalink / raw) To: LI Qingwu Cc: sre, robh+dt, dmurphy, pali, afd, linux-pm, devicetree, linux-kernel, grygorii.tertychnyi, andrey.zhizhikin On Tue, Feb 02, 2021 at 08:48:58AM +0000, LI Qingwu wrote: > Add bindings for TI BQ78Z100. An I2C interface gas gauge. > It provides a fully integrated safety protection, > and authentication for 1 to 2-series cell Li-Ion and No comma before "and". What does it mean authentication? In the future, please send the bindings as first patch. The checkpatch should point this - did you run it? Best regards, Krzysztof > Li-Polymer battery packs. > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > --- > Documentation/devicetree/bindings/power/supply/bq27xxx.yaml | 1 + ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 2021-02-02 9:08 ` Krzysztof Kozlowski @ 2021-02-03 3:49 ` LI Qingwu 0 siblings, 0 replies; 6+ messages in thread From: LI Qingwu @ 2021-02-03 3:49 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: sre, robh+dt, dmurphy, pali, linux-pm, devicetree, linux-kernel, TERTYCHNYI Grygorii, ZHIZHIKIN Andrey Hello Krzysztof Kozlowski, Thanks for input! No comma before "and". >> I will delete in V3 What does it mean authentication? >> The gas gauge able to has a security key to seal and unseal access, to protect the design data, like design energy and capacity. In the future, please send the bindings as first patch. The checkpatch should point this - did you run it? >>yes, I run the checkpatch, I will reorder in V3. Best Regards ********************************************** Li Qingwu (Terry) Senior Embedded Software Engineer Leica Geosystems(Shanghai)Co.,Limited (Tel): +86 21 61061036 (FAX): +86 21 61061008 (Mobile): +86 187 0185 9600 E-mail: Qing-wu.Li@leica-geosystems.com.cn Http: www.leica-geosystems.com.cn ********************************************** -----Original Message----- From: Krzysztof Kozlowski <krzk@kernel.org> Sent: Tuesday, February 2, 2021 5:08 PM To: LI Qingwu <qing-wu.li@leica-geosystems.com.cn> Cc: sre@kernel.org; robh+dt@kernel.org; dmurphy@ti.com; pali@kernel.org; afd@ti.com; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; TERTYCHNYI Grygorii <grygorii.tertychnyi@leica-geosystems.com>; ZHIZHIKIN Andrey <andrey.zhizhikin@leica-geosystems.com> Subject: Re: [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email. On Tue, Feb 02, 2021 at 08:48:58AM +0000, LI Qingwu wrote: > Add bindings for TI BQ78Z100. An I2C interface gas gauge. > It provides a fully integrated safety protection, and authentication > for 1 to 2-series cell Li-Ion and No comma before "and". What does it mean authentication? In the future, please send the bindings as first patch. The checkpatch should point this - did you run it? Best regards, Krzysztof > Li-Polymer battery packs. > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > --- > Documentation/devicetree/bindings/power/supply/bq27xxx.yaml | 1 + ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-02-03 3:50 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-02-02 8:48 [PATCH V2 0/2] cover-letter bq27xxx: BQ78Z100: Fix Typo LI Qingwu 2021-02-02 8:48 ` [PATCH V2 1/2] power: supply: bq27xxx: Add support for BQ78Z100 LI Qingwu 2021-02-02 9:06 ` Krzysztof Kozlowski 2021-02-02 8:48 ` [PATCH V2 2/2] dt-bindings: power: bq27xxx: add bq78z10 LI Qingwu 2021-02-02 9:08 ` Krzysztof Kozlowski 2021-02-03 3:49 ` LI Qingwu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.