From: Li Yang <leoyang.li@nxp.com> To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, Oleksij Rempel <linux@rempel-privat.de>, Krzysztof Kozlowski <krzk@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Li Yang <leoyang.li@nxp.com> Subject: [PATCH 08/15] ARM: dts: ls1021a: breakup long values in thermal node Date: Fri, 5 Feb 2021 17:47:27 -0600 [thread overview] Message-ID: <20210205234734.3397-9-leoyang.li@nxp.com> (raw) In-Reply-To: <20210205234734.3397-1-leoyang.li@nxp.com> Breakup long values to pass the schema check. Signed-off-by: Li Yang <leoyang.li@nxp.com> --- arch/arm/boot/dts/ls1021a.dtsi | 72 +++++++++++++++++----------------- 1 file changed, 36 insertions(+), 36 deletions(-) diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 215a3d928ec9..88e7248fc5f0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -247,42 +247,42 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; - fsl,tmu-calibration = <0x00000000 0x00000020 - 0x00000001 0x00000024 - 0x00000002 0x0000002a - 0x00000003 0x00000032 - 0x00000004 0x00000038 - 0x00000005 0x0000003e - 0x00000006 0x00000043 - 0x00000007 0x0000004a - 0x00000008 0x00000050 - 0x00000009 0x00000059 - 0x0000000a 0x0000005f - 0x0000000b 0x00000066 - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000065 - 0x00010009 0x0000006f - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000048 - 0x00020004 0x00000054 - 0x00020005 0x00000060 - 0x00020006 0x0000006c - - 0x00030000 0x00000025 - 0x00030001 0x00000033 - 0x00030002 0x00000043 - 0x00030003 0x00000055>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Li Yang <leoyang.li@nxp.com> To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, Oleksij Rempel <linux@rempel-privat.de>, Krzysztof Kozlowski <krzk@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Li Yang <leoyang.li@nxp.com> Subject: [PATCH 08/15] ARM: dts: ls1021a: breakup long values in thermal node Date: Fri, 5 Feb 2021 17:47:27 -0600 [thread overview] Message-ID: <20210205234734.3397-9-leoyang.li@nxp.com> (raw) In-Reply-To: <20210205234734.3397-1-leoyang.li@nxp.com> Breakup long values to pass the schema check. Signed-off-by: Li Yang <leoyang.li@nxp.com> --- arch/arm/boot/dts/ls1021a.dtsi | 72 +++++++++++++++++----------------- 1 file changed, 36 insertions(+), 36 deletions(-) diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 215a3d928ec9..88e7248fc5f0 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -247,42 +247,42 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; - fsl,tmu-calibration = <0x00000000 0x00000020 - 0x00000001 0x00000024 - 0x00000002 0x0000002a - 0x00000003 0x00000032 - 0x00000004 0x00000038 - 0x00000005 0x0000003e - 0x00000006 0x00000043 - 0x00000007 0x0000004a - 0x00000008 0x00000050 - 0x00000009 0x00000059 - 0x0000000a 0x0000005f - 0x0000000b 0x00000066 - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000065 - 0x00010009 0x0000006f - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000048 - 0x00020004 0x00000054 - 0x00020005 0x00000060 - 0x00020006 0x0000006c - - 0x00030000 0x00000025 - 0x00030001 0x00000033 - 0x00030002 0x00000043 - 0x00030003 0x00000055>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; #thermal-sensor-cells = <1>; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-02-06 4:49 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-05 23:47 [PATCH 00/15] Cleanup of LS1021a device trees Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 01/15] dt-bindings: arm: fsl: add ls1021a-tsn board Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-06 11:22 ` Krzysztof Kozlowski 2021-02-06 11:22 ` Krzysztof Kozlowski 2021-02-11 0:02 ` Rob Herring 2021-02-11 0:02 ` Rob Herring 2021-02-05 23:47 ` [PATCH 02/15] dt-bindings: i2c: imx: update schema to align with original binding Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-06 11:27 ` Krzysztof Kozlowski 2021-02-06 11:27 ` Krzysztof Kozlowski 2021-02-05 23:47 ` [PATCH 03/15] dt-bindings: memory: fsl: convert ifc binding to yaml schema Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-06 11:37 ` Krzysztof Kozlowski 2021-02-06 11:37 ` Krzysztof Kozlowski 2021-02-08 16:55 ` Rob Herring 2021-02-08 16:55 ` Rob Herring 2021-02-08 17:07 ` Leo Li 2021-02-08 17:07 ` Leo Li 2021-02-08 18:21 ` Rob Herring 2021-02-08 18:21 ` Rob Herring 2021-02-08 23:25 ` Leo Li 2021-02-08 23:25 ` Leo Li 2021-02-05 23:47 ` [PATCH 04/15] ARM: dts: ls1021a: change to use SPDX identifiers Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-06 11:42 ` Krzysztof Kozlowski 2021-02-06 11:42 ` Krzysztof Kozlowski 2021-02-05 23:47 ` [PATCH 05/15] ARM: dts: ls1021a-qds: Add node for QSPI flash Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 06/15] ARM: dts: ls1021a: update pcie nodes for dt-schema check Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 07/15] ARM: dts: ls1021a: fix board compatible to follow binding schema Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` Li Yang [this message] 2021-02-05 23:47 ` [PATCH 08/15] ARM: dts: ls1021a: breakup long values in thermal node Li Yang 2021-02-05 23:47 ` [PATCH 09/15] ARM: dts: ls1021a: fix ifc node to follow binding schema Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 10/15] ARM: dts: ls1021a: remove regulators simple-bus Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 11/15] ARM: dts: ls1021a: fix memory node for schema check Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 12/15] ARM: dts: ls1021a: add #dma-cells to qdma node Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 13/15] ARM: dts: ls1021a: add #power-domain-cells for power-controller node Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 14/15] ARM: dts: ls1021a-qds: change fpga to simple-mfd device Li Yang 2021-02-05 23:47 ` Li Yang 2021-02-05 23:47 ` [PATCH 15/15] ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node Li Yang 2021-02-05 23:47 ` Li Yang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210205234734.3397-9-leoyang.li@nxp.com \ --to=leoyang.li@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=krzk@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@rempel-privat.de \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.