From: Lucas Tanure <tanureal@opensource.cirrus.com> To: James Schulman <james.schulman@cirrus.com>, David Rhodes <david.rhodes@cirrus.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com>, <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>, Lucas Tanure <tanureal@opensource.cirrus.com> Subject: [PATCH v2 01/15] ASoC: cs42l42: Fix Bitclock polarity inversion Date: Fri, 5 Mar 2021 17:34:28 +0000 [thread overview] Message-ID: <20210305173442.195740-2-tanureal@opensource.cirrus.com> (raw) In-Reply-To: <20210305173442.195740-1-tanureal@opensource.cirrus.com> The driver was setting bit clock polarity opposite to intended polarity. Also simplify the code by grouping ADC and DAC clock configurations into a single field. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> --- Changes in v2: - No changes sound/soc/codecs/cs42l42.c | 20 ++++++++------------ sound/soc/codecs/cs42l42.h | 11 ++++++----- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 210fcbedf2413..df0d5fec0287a 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -797,27 +797,23 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) /* Bitclock/frame inversion */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; break; case SND_SOC_DAIFMT_NB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; case SND_SOC_DAIFMT_IB_NF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; break; case SND_SOC_DAIFMT_IB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; } - snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, - CS42L42_ASP_MODE_MASK | - CS42L42_ASP_SCPOL_IN_DAC_MASK | - CS42L42_ASP_LCPOL_IN_MASK, asp_cfg_val); + snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, CS42L42_ASP_MODE_MASK | + CS42L42_ASP_SCPOL_MASK | + CS42L42_ASP_LCPOL_MASK, + asp_cfg_val); return 0; } diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 9e3cc528dcff0..1f0d67c95a9ad 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -258,11 +258,12 @@ #define CS42L42_ASP_SLAVE_MODE 0x00 #define CS42L42_ASP_MODE_SHIFT 4 #define CS42L42_ASP_MODE_MASK (1 << CS42L42_ASP_MODE_SHIFT) -#define CS42L42_ASP_SCPOL_IN_DAC_SHIFT 2 -#define CS42L42_ASP_SCPOL_IN_DAC_MASK (1 << CS42L42_ASP_SCPOL_IN_DAC_SHIFT) -#define CS42L42_ASP_LCPOL_IN_SHIFT 0 -#define CS42L42_ASP_LCPOL_IN_MASK (1 << CS42L42_ASP_LCPOL_IN_SHIFT) -#define CS42L42_ASP_POL_INV 1 +#define CS42L42_ASP_SCPOL_SHIFT 2 +#define CS42L42_ASP_SCPOL_MASK (3 << CS42L42_ASP_SCPOL_SHIFT) +#define CS42L42_ASP_SCPOL_NOR 3 +#define CS42L42_ASP_LCPOL_SHIFT 0 +#define CS42L42_ASP_LCPOL_MASK (3 << CS42L42_ASP_LCPOL_SHIFT) +#define CS42L42_ASP_LCPOL_INV 3 #define CS42L42_ASP_FRM_CFG (CS42L42_PAGE_12 + 0x08) #define CS42L42_ASP_STP_SHIFT 4 -- 2.30.1
WARNING: multiple messages have this Message-ID (diff)
From: Lucas Tanure <tanureal@opensource.cirrus.com> To: James Schulman <james.schulman@cirrus.com>, David Rhodes <david.rhodes@cirrus.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: patches@opensource.cirrus.com, Richard Fitzgerald <rf@opensource.cirrus.com>, alsa-devel@alsa-project.org, Lucas Tanure <tanureal@opensource.cirrus.com>, linux-kernel@vger.kernel.org Subject: [PATCH v2 01/15] ASoC: cs42l42: Fix Bitclock polarity inversion Date: Fri, 5 Mar 2021 17:34:28 +0000 [thread overview] Message-ID: <20210305173442.195740-2-tanureal@opensource.cirrus.com> (raw) In-Reply-To: <20210305173442.195740-1-tanureal@opensource.cirrus.com> The driver was setting bit clock polarity opposite to intended polarity. Also simplify the code by grouping ADC and DAC clock configurations into a single field. Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com> --- Changes in v2: - No changes sound/soc/codecs/cs42l42.c | 20 ++++++++------------ sound/soc/codecs/cs42l42.h | 11 ++++++----- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 210fcbedf2413..df0d5fec0287a 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -797,27 +797,23 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) /* Bitclock/frame inversion */ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; break; case SND_SOC_DAIFMT_NB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; + asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; case SND_SOC_DAIFMT_IB_NF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; break; case SND_SOC_DAIFMT_IB_IF: - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_LCPOL_IN_SHIFT; - asp_cfg_val |= CS42L42_ASP_POL_INV << - CS42L42_ASP_SCPOL_IN_DAC_SHIFT; + asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT; break; } - snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, - CS42L42_ASP_MODE_MASK | - CS42L42_ASP_SCPOL_IN_DAC_MASK | - CS42L42_ASP_LCPOL_IN_MASK, asp_cfg_val); + snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, CS42L42_ASP_MODE_MASK | + CS42L42_ASP_SCPOL_MASK | + CS42L42_ASP_LCPOL_MASK, + asp_cfg_val); return 0; } diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h index 9e3cc528dcff0..1f0d67c95a9ad 100644 --- a/sound/soc/codecs/cs42l42.h +++ b/sound/soc/codecs/cs42l42.h @@ -258,11 +258,12 @@ #define CS42L42_ASP_SLAVE_MODE 0x00 #define CS42L42_ASP_MODE_SHIFT 4 #define CS42L42_ASP_MODE_MASK (1 << CS42L42_ASP_MODE_SHIFT) -#define CS42L42_ASP_SCPOL_IN_DAC_SHIFT 2 -#define CS42L42_ASP_SCPOL_IN_DAC_MASK (1 << CS42L42_ASP_SCPOL_IN_DAC_SHIFT) -#define CS42L42_ASP_LCPOL_IN_SHIFT 0 -#define CS42L42_ASP_LCPOL_IN_MASK (1 << CS42L42_ASP_LCPOL_IN_SHIFT) -#define CS42L42_ASP_POL_INV 1 +#define CS42L42_ASP_SCPOL_SHIFT 2 +#define CS42L42_ASP_SCPOL_MASK (3 << CS42L42_ASP_SCPOL_SHIFT) +#define CS42L42_ASP_SCPOL_NOR 3 +#define CS42L42_ASP_LCPOL_SHIFT 0 +#define CS42L42_ASP_LCPOL_MASK (3 << CS42L42_ASP_LCPOL_SHIFT) +#define CS42L42_ASP_LCPOL_INV 3 #define CS42L42_ASP_FRM_CFG (CS42L42_PAGE_12 + 0x08) #define CS42L42_ASP_STP_SHIFT 4 -- 2.30.1
next prev parent reply other threads:[~2021-03-05 17:35 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-05 17:34 [PATCH v2 00/15] Report jack and button detection + Capture Support Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure [this message] 2021-03-05 17:34 ` [PATCH v2 01/15] ASoC: cs42l42: Fix Bitclock polarity inversion Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 02/15] ASoC: cs42l42: Fix channel width support Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 03/15] ASoC: cs42l42: Fix mixer volume control Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 04/15] ASoC: cs42l42: Don't enable/disable regulator at Bias Level Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 05/15] ASoC: cs42l42: Always wait at least 3ms after reset Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 06/15] ASoC: cs42l42: Remove power if the driver is being removed Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 18:49 ` Mark Brown 2021-03-05 18:49 ` Mark Brown 2021-03-05 17:34 ` [PATCH v2 07/15] ASoC: cs42l42: Disable regulators if probe fails Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 08/15] ASoC: cs42l42: Provide finer control on playback path Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 09/15] ASoC: cs42l42: Set clock source for both ways of stream Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 10/15] ASoC: cs42l42: Add Capture Support Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 11/15] ASoC: cs42l42: Report jack and button detection Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 12/15] ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 13/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 14/15] ASoC: cs42l42: Only start PLL if it is needed Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-05 17:34 ` [PATCH v2 15/15] ASoC: cs42l42: Wait for PLL to lock before switching to it Lucas Tanure 2021-03-05 17:34 ` Lucas Tanure 2021-03-08 16:06 ` (subset) [PATCH v2 00/15] Report jack and button detection + Capture Support Mark Brown 2021-03-08 16:06 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210305173442.195740-2-tanureal@opensource.cirrus.com \ --to=tanureal@opensource.cirrus.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=david.rhodes@cirrus.com \ --cc=james.schulman@cirrus.com \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=patches@opensource.cirrus.com \ --cc=perex@perex.cz \ --cc=rf@opensource.cirrus.com \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.