[PATCH 0/7] Microship SAMA5D4 VPU support et al

[Emil Velikov <emil.l.velikov@gmail.com>]

Hi all,

This series adds support for the Microchip SAMA5D4 VPU, which it based
on the Hantro G1.

The hardware can support up-to 1280x720 for each of the MPEG2, VP8 and
H264 codecs. There is only a single decoder and no encoders on the SoC.

To minimise duplication, the series starts with a few small cleanups.


As you may have noticed, this is my first patches series to linux-media,
so any tips how to make this as smoother process are appreciated.


Looking forward to your feedback,
Emil


Emil Velikov (7):
  media: hantro: use G1_REG_INTERRUPT directly for the mpeg2
  media: hantro: imx: reuse MB_DIM define
  media: hantro: imx: remove duplicate dec_base init
  media: hantro: imx: remove unused include
  media: hantro: introduce hantro_g1.c for common API
  ARM: configs: at91: sama5: update with savedefconfig
  ARM: dts: at91: sama5d4: add vdec0 component

 arch/arm/boot/dts/sama5d4.dtsi                |   9 ++
 arch/arm/configs/sama5_defconfig              |  51 ++++----
 drivers/staging/media/hantro/Kconfig          |  10 +-
 drivers/staging/media/hantro/Makefile         |   4 +
 drivers/staging/media/hantro/hantro_drv.c     |   3 +
 drivers/staging/media/hantro/hantro_g1.c      |  39 ++++++
 .../media/hantro/hantro_g1_mpeg2_dec.c        |   5 +-
 drivers/staging/media/hantro/hantro_hw.h      |   4 +
 drivers/staging/media/hantro/imx8m_vpu_hw.c   |  27 +---
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  36 +-----
 .../staging/media/hantro/sama5d4_vdec_hw.c    | 118 ++++++++++++++++++
 11 files changed, 216 insertions(+), 90 deletions(-)
 create mode 100644 drivers/staging/media/hantro/hantro_g1.c
 create mode 100644 drivers/staging/media/hantro/sama5d4_vdec_hw.c

-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel