* [PATCH net-next v3 v3 0/2] axienet clock additions @ 2021-03-12 19:52 Robert Hancock 2021-03-12 19:52 ` [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks Robert Hancock 2021-03-12 19:52 ` [PATCH net-next v3 v3 2/2] net: axienet: Enable more clocks Robert Hancock 0 siblings, 2 replies; 6+ messages in thread From: Robert Hancock @ 2021-03-12 19:52 UTC (permalink / raw) To: radhey.shyam.pandey, davem, kuba; +Cc: netdev, devicetree, Robert Hancock Add support to the axienet driver for controlling all of the clocks that the logic core may utilize. Note this patch set is dependent on "net: axienet: Fix probe error cleanup" which has been submitted for the net tree. Changed since v2: -Additional clock description clarification Changed since v1: -Clarified clock usages in documentation and code comments Robert Hancock (2): dt-bindings: net: xilinx_axienet: Document additional clocks net: axienet: Enable more clocks .../bindings/net/xilinx_axienet.txt | 25 ++++++++++---- drivers/net/ethernet/xilinx/xilinx_axienet.h | 8 +++-- .../net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++++++++++++---- .../net/ethernet/xilinx/xilinx_axienet_mdio.c | 4 +-- 4 files changed, 54 insertions(+), 17 deletions(-) -- 2.27.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks 2021-03-12 19:52 [PATCH net-next v3 v3 0/2] axienet clock additions Robert Hancock @ 2021-03-12 19:52 ` Robert Hancock 2021-03-24 17:08 ` Rob Herring 2021-03-12 19:52 ` [PATCH net-next v3 v3 2/2] net: axienet: Enable more clocks Robert Hancock 1 sibling, 1 reply; 6+ messages in thread From: Robert Hancock @ 2021-03-12 19:52 UTC (permalink / raw) To: radhey.shyam.pandey, davem, kuba; +Cc: netdev, devicetree, Robert Hancock Update DT bindings to describe all of the clocks that the axienet driver will now be able to make use of. Signed-off-by: Robert Hancock <robert.hancock@calian.com> --- .../bindings/net/xilinx_axienet.txt | 25 ++++++++++++++----- 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index 2cd452419ed0..b8e4894bc634 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -42,11 +42,23 @@ Optional properties: support both 1000BaseX and SGMII modes. If set, the phy-mode should be set to match the mode selected on core reset (i.e. by the basex_or_sgmii core input line). -- clocks : AXI bus clock for the device. Refer to common clock bindings. - Used to calculate MDIO clock divisor. If not specified, it is - auto-detected from the CPU clock (but only on platforms where - this is possible). New device trees should specify this - the - auto detection is only for backward compatibility. +- clock-names: Tuple listing input clock names. Possible clocks: + s_axi_lite_clk: Clock for AXI register slave interface + axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces + ref_clk: Ethernet reference clock, used by signal delay + primitives and transceivers + mgt_clk: MGT reference clock (used by optional internal + PCS/PMA PHY) + + Note that if s_axi_lite_clk is not specified by name, the + first clock of any name is used for this. If that is also not + specified, the clock rate is auto-detected from the CPU clock + (but only on platforms where this is possible). New device + trees should specify all applicable clocks by name - the + fallbacks to an unnamed clock or to CPU clock are only for + backward compatibility. +- clocks: Phandles to input clocks matching clock-names. Refer to common + clock bindings. - axistream-connected: Reference to another node which contains the resources for the AXI DMA controller used by this device. If this is specified, the DMA-related resources from that @@ -62,7 +74,8 @@ Example: device_type = "network"; interrupt-parent = <µblaze_0_axi_intc>; interrupts = <2 0 1>; - clocks = <&axi_clk>; + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; phy-mode = "mii"; reg = <0x40c00000 0x40000 0x50c00000 0x40000>; xlnx,rxcsum = <0x2>; -- 2.27.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks 2021-03-12 19:52 ` [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks Robert Hancock @ 2021-03-24 17:08 ` Rob Herring 2021-03-24 17:19 ` Robert Hancock 0 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2021-03-24 17:08 UTC (permalink / raw) To: Robert Hancock; +Cc: radhey.shyam.pandey, davem, kuba, netdev, devicetree On Fri, Mar 12, 2021 at 01:52:13PM -0600, Robert Hancock wrote: > Update DT bindings to describe all of the clocks that the axienet > driver will now be able to make use of. > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > --- > .../bindings/net/xilinx_axienet.txt | 25 ++++++++++++++----- > 1 file changed, 19 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > index 2cd452419ed0..b8e4894bc634 100644 > --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt > +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > @@ -42,11 +42,23 @@ Optional properties: > support both 1000BaseX and SGMII modes. If set, the phy-mode > should be set to match the mode selected on core reset (i.e. > by the basex_or_sgmii core input line). > -- clocks : AXI bus clock for the device. Refer to common clock bindings. > - Used to calculate MDIO clock divisor. If not specified, it is > - auto-detected from the CPU clock (but only on platforms where > - this is possible). New device trees should specify this - the > - auto detection is only for backward compatibility. > +- clock-names: Tuple listing input clock names. Possible clocks: > + s_axi_lite_clk: Clock for AXI register slave interface > + axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces > + ref_clk: Ethernet reference clock, used by signal delay > + primitives and transceivers > + mgt_clk: MGT reference clock (used by optional internal > + PCS/PMA PHY) '_clk' is redundant. > + > + Note that if s_axi_lite_clk is not specified by name, the > + first clock of any name is used for this. If that is also not > + specified, the clock rate is auto-detected from the CPU clock > + (but only on platforms where this is possible). New device > + trees should specify all applicable clocks by name - the > + fallbacks to an unnamed clock or to CPU clock are only for > + backward compatibility. > +- clocks: Phandles to input clocks matching clock-names. Refer to common > + clock bindings. > - axistream-connected: Reference to another node which contains the resources > for the AXI DMA controller used by this device. > If this is specified, the DMA-related resources from that > @@ -62,7 +74,8 @@ Example: > device_type = "network"; > interrupt-parent = <µblaze_0_axi_intc>; > interrupts = <2 0 1>; > - clocks = <&axi_clk>; > + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk"; > + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>; > phy-mode = "mii"; > reg = <0x40c00000 0x40000 0x50c00000 0x40000>; > xlnx,rxcsum = <0x2>; > -- > 2.27.0 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks 2021-03-24 17:08 ` Rob Herring @ 2021-03-24 17:19 ` Robert Hancock 2021-03-25 13:54 ` Rob Herring 0 siblings, 1 reply; 6+ messages in thread From: Robert Hancock @ 2021-03-24 17:19 UTC (permalink / raw) To: robh; +Cc: davem, kuba, netdev, radhey.shyam.pandey, devicetree On Wed, 2021-03-24 at 11:08 -0600, Rob Herring wrote: > On Fri, Mar 12, 2021 at 01:52:13PM -0600, Robert Hancock wrote: > > Update DT bindings to describe all of the clocks that the axienet > > driver will now be able to make use of. > > > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > > --- > > .../bindings/net/xilinx_axienet.txt | 25 ++++++++++++++----- > > 1 file changed, 19 insertions(+), 6 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > index 2cd452419ed0..b8e4894bc634 100644 > > --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > @@ -42,11 +42,23 @@ Optional properties: > > support both 1000BaseX and SGMII modes. If set, the phy-mode > > should be set to match the mode selected on core reset (i.e. > > by the basex_or_sgmii core input line). > > -- clocks : AXI bus clock for the device. Refer to common clock bindings. > > - Used to calculate MDIO clock divisor. If not specified, it is > > - auto-detected from the CPU clock (but only on platforms where > > - this is possible). New device trees should specify this - the > > - auto detection is only for backward compatibility. > > +- clock-names: Tuple listing input clock names. Possible clocks: > > + s_axi_lite_clk: Clock for AXI register slave interface > > + axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS > > interfaces > > + ref_clk: Ethernet reference clock, used by signal delay > > + primitives and transceivers > > + mgt_clk: MGT reference clock (used by optional internal > > + PCS/PMA PHY) > > '_clk' is redundant. True, but there are existing device trees which already referenced these names because those are what was used by the Xilinx version of this driver and hence the Xilinx device tree generation software. So for compatibility I think we are kind of stuck with those names.. > > > + > > + Note that if s_axi_lite_clk is not specified by name, the > > + first clock of any name is used for this. If that is also not > > + specified, the clock rate is auto-detected from the CPU clock > > + (but only on platforms where this is possible). New device > > + trees should specify all applicable clocks by name - the > > + fallbacks to an unnamed clock or to CPU clock are only for > > + backward compatibility. > > +- clocks: Phandles to input clocks matching clock-names. Refer to > > common > > + clock bindings. > > - axistream-connected: Reference to another node which contains the > > resources > > for the AXI DMA controller used by this device. > > If this is specified, the DMA-related resources from > > that > > @@ -62,7 +74,8 @@ Example: > > device_type = "network"; > > interrupt-parent = <µblaze_0_axi_intc>; > > interrupts = <2 0 1>; > > - clocks = <&axi_clk>; > > + clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", > > "mgt_clk"; > > + clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, > > <&mgt_clk>; > > phy-mode = "mii"; > > reg = <0x40c00000 0x40000 0x50c00000 0x40000>; > > xlnx,rxcsum = <0x2>; > > -- > > 2.27.0 > > -- Robert Hancock Senior Hardware Designer, Calian Advanced Technologies www.calian.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks 2021-03-24 17:19 ` Robert Hancock @ 2021-03-25 13:54 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2021-03-25 13:54 UTC (permalink / raw) To: Robert Hancock; +Cc: davem, kuba, netdev, radhey.shyam.pandey, devicetree On Wed, Mar 24, 2021 at 11:19 AM Robert Hancock <robert.hancock@calian.com> wrote: > > On Wed, 2021-03-24 at 11:08 -0600, Rob Herring wrote: > > On Fri, Mar 12, 2021 at 01:52:13PM -0600, Robert Hancock wrote: > > > Update DT bindings to describe all of the clocks that the axienet > > > driver will now be able to make use of. > > > > > > Signed-off-by: Robert Hancock <robert.hancock@calian.com> > > > --- > > > .../bindings/net/xilinx_axienet.txt | 25 ++++++++++++++----- > > > 1 file changed, 19 insertions(+), 6 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > > b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > > index 2cd452419ed0..b8e4894bc634 100644 > > > --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > > +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt > > > @@ -42,11 +42,23 @@ Optional properties: > > > support both 1000BaseX and SGMII modes. If set, the phy-mode > > > should be set to match the mode selected on core reset (i.e. > > > by the basex_or_sgmii core input line). > > > -- clocks : AXI bus clock for the device. Refer to common clock bindings. > > > - Used to calculate MDIO clock divisor. If not specified, it is > > > - auto-detected from the CPU clock (but only on platforms where > > > - this is possible). New device trees should specify this - the > > > - auto detection is only for backward compatibility. > > > +- clock-names: Tuple listing input clock names. Possible clocks: > > > + s_axi_lite_clk: Clock for AXI register slave interface > > > + axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS > > > interfaces > > > + ref_clk: Ethernet reference clock, used by signal delay > > > + primitives and transceivers > > > + mgt_clk: MGT reference clock (used by optional internal > > > + PCS/PMA PHY) > > > > '_clk' is redundant. > > True, but there are existing device trees which already referenced these names > because those are what was used by the Xilinx version of this driver and hence > the Xilinx device tree generation software. So for compatibility I think we are > kind of stuck with those names.. upstream? If not, then it doesn't matter what downstream is doing. However, this isn't that important, so it's fine. Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH net-next v3 v3 2/2] net: axienet: Enable more clocks 2021-03-12 19:52 [PATCH net-next v3 v3 0/2] axienet clock additions Robert Hancock 2021-03-12 19:52 ` [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks Robert Hancock @ 2021-03-12 19:52 ` Robert Hancock 1 sibling, 0 replies; 6+ messages in thread From: Robert Hancock @ 2021-03-12 19:52 UTC (permalink / raw) To: radhey.shyam.pandey, davem, kuba; +Cc: netdev, devicetree, Robert Hancock This driver was only enabling the first clock on the device, regardless of its name. However, this controller logic can have multiple clocks which should all be enabled. Add support for enabling additional clocks. The clock names used are matching those used in the Xilinx version of this driver as well as the Xilinx device tree generator, except for mgt_clk which is not present there. For backward compatibility, if no named clocks are present, the first clock present is used for determining the MDIO bus clock divider. Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 8 +++-- .../net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++++++++++++---- .../net/ethernet/xilinx/xilinx_axienet_mdio.c | 4 +-- 3 files changed, 35 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 1e966a39967e..708769349f76 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -376,6 +376,8 @@ struct axidma_bd { struct sk_buff *skb; } __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT); +#define XAE_NUM_MISC_CLOCKS 3 + /** * struct axienet_local - axienet private per device data * @ndev: Pointer for net_device to which it will be attached. @@ -385,7 +387,8 @@ struct axidma_bd { * @phylink_config: phylink configuration settings * @pcs_phy: Reference to PCS/PMA PHY if used * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core - * @clk: Clock for AXI bus + * @axi_clk: AXI4-Lite bus clock + * @misc_clks: Misc ethernet clocks (AXI4-Stream, Ref, MGT clocks) * @mii_bus: Pointer to MII bus structure * @mii_clk_div: MII bus clock divider value * @regs_start: Resource start for axienet device addresses @@ -434,7 +437,8 @@ struct axienet_local { bool switch_x_sgmii; - struct clk *clk; + struct clk *axi_clk; + struct clk_bulk_data misc_clks[XAE_NUM_MISC_CLOCKS]; struct mii_bus *mii_bus; u8 mii_clk_div; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 5d677db0aee5..9635101fbb88 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1863,17 +1863,35 @@ static int axienet_probe(struct platform_device *pdev) lp->rx_bd_num = RX_BD_NUM_DEFAULT; lp->tx_bd_num = TX_BD_NUM_DEFAULT; - lp->clk = devm_clk_get_optional(&pdev->dev, NULL); - if (IS_ERR(lp->clk)) { - ret = PTR_ERR(lp->clk); + lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk"); + if (!lp->axi_clk) { + /* For backward compatibility, if named AXI clock is not present, + * treat the first clock specified as the AXI clock. + */ + lp->axi_clk = devm_clk_get_optional(&pdev->dev, NULL); + } + if (IS_ERR(lp->axi_clk)) { + ret = PTR_ERR(lp->axi_clk); goto free_netdev; } - ret = clk_prepare_enable(lp->clk); + ret = clk_prepare_enable(lp->axi_clk); if (ret) { - dev_err(&pdev->dev, "Unable to enable clock: %d\n", ret); + dev_err(&pdev->dev, "Unable to enable AXI clock: %d\n", ret); goto free_netdev; } + lp->misc_clks[0].id = "axis_clk"; + lp->misc_clks[1].id = "ref_clk"; + lp->misc_clks[2].id = "mgt_clk"; + + ret = devm_clk_bulk_get_optional(&pdev->dev, XAE_NUM_MISC_CLOCKS, lp->misc_clks); + if (ret) + goto cleanup_clk; + + ret = clk_bulk_prepare_enable(XAE_NUM_MISC_CLOCKS, lp->misc_clks); + if (ret) + goto cleanup_clk; + /* Map device registers */ ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0); lp->regs = devm_ioremap_resource(&pdev->dev, ethres); @@ -2109,7 +2127,8 @@ static int axienet_probe(struct platform_device *pdev) of_node_put(lp->phy_node); cleanup_clk: - clk_disable_unprepare(lp->clk); + clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks); + clk_disable_unprepare(lp->axi_clk); free_netdev: free_netdev(ndev); @@ -2132,7 +2151,8 @@ static int axienet_remove(struct platform_device *pdev) axienet_mdio_teardown(lp); - clk_disable_unprepare(lp->clk); + clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks); + clk_disable_unprepare(lp->axi_clk); of_node_put(lp->phy_node); lp->phy_node = NULL; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 9c014cee34b2..48f544f6c999 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -159,8 +159,8 @@ int axienet_mdio_enable(struct axienet_local *lp) lp->mii_clk_div = 0; - if (lp->clk) { - host_clock = clk_get_rate(lp->clk); + if (lp->axi_clk) { + host_clock = clk_get_rate(lp->axi_clk); } else { struct device_node *np1; -- 2.27.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-03-25 13:55 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-12 19:52 [PATCH net-next v3 v3 0/2] axienet clock additions Robert Hancock 2021-03-12 19:52 ` [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks Robert Hancock 2021-03-24 17:08 ` Rob Herring 2021-03-24 17:19 ` Robert Hancock 2021-03-25 13:54 ` Rob Herring 2021-03-12 19:52 ` [PATCH net-next v3 v3 2/2] net: axienet: Enable more clocks Robert Hancock
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.