From: kernel test robot <rong.a.chen@intel.com>
To: dillon.minfei@gmail.com, robh+dt@kernel.org,
alexandre.torgue@foss.st.com, a.fatoum@pengutronix.de,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux@armlinux.org.uk
Cc: kbuild-all@lists.01.org
Subject: Re: [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
Date: Mon, 15 Mar 2021 08:25:57 +0800 [thread overview]
Message-ID: <20210315002557.GL219708@shao2-debian> (raw)
In-Reply-To: <1615530274-31422-7-git-send-email-dillon.minfei@gmail.com>
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on stm32/stm32-next]
[also build test WARNING on robh/for-next soc/for-next v5.12-rc2 next-20210312]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/dillon-minfei-gmail-com/ARM-STM32-add-art-pi-stm32h750xbh6-board-support/20210312-142805
base: https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce: make ARCH=arm dtbs_check
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
"dtcheck warnings: (new ones prefixed by >>)"
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 1476526080, 12288]], 'interrupt-parent': [[22]], 'st,syscfg': [[28, 8]], 'pins-are-numbered': True, 'compatible': ['st,stm32h750-pinctrl'], 'gpio@58020000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[0, 1024]], 'clocks': [[2, 86]], 'st,bank-name': ['GPIOA'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[10]]}, 'gpio@58020400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[1024, 1024]], 'clocks': [[2, 85]], 'st,bank-name': ['GPIOB'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58020800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[2048, 1024]], 'clocks': [[2, 84]], 'st,bank-name': ['GPIOC'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[6]]}, 'gpio@58020c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg':
[[3072, 1024]], 'clocks': [[2, 83]], 'st,bank-name': ['GPIOD'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[4]]}, 'gpio@58021000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[4096, 1024]], 'clocks': [[2, 82]], 'st,bank-name': ['GPIOE'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[5120, 1024]], 'clocks': [[2, 81]], 'st,bank-name': ['GPIOF'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[6144, 1024]], 'clocks': [[2, 80]], 'st,bank-name': ['GPIOG'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[7168, 1024]], 'clocks': [[2, 79]], 'st,bank-name': ['GPIOH'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58022000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[8192, 1
024]], 'clocks': [[2, 78]], 'st,bank-name': ['GPIOI'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[7]]}, 'gpio@58022400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[9216, 1024]], 'clocks': [[2, 77]], 'st,bank-name': ['GPIOJ'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58022800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[10240, 1024]], 'clocks': [[2, 76]], 'st,bank-name': ['GPIOK'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'i2c1-0': {'pins': {'pinmux': [[5637], [5893]], 'bias-disable': True, 'drive-open-drain': True, 'slew-rate': [[0]]}}, 'rmii-0': {'phandle': [[29]], 'pins': {'pinmux': [[27404], [27916], [27660], [9228], [9484], [1804], [8460], [524], [268]], 'slew-rate': [[2]]}}, 'sdmmc1-b4-0': {'phandle': [[14]], 'pins': {'pinmux': [[10253], [10509], [10765], [11021], [11277], [12813]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc1-b4-od-0': {'phandle': [[15
]], 'pins1': {'pinmux': [[10253], [10509], [10765], [11021], [11277]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[12813]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc1-b4-sleep-0': {'phandle': [[16]], 'pins': {'pinmux': [[10257], [10513], [10769], [11025], [11281], [12817]]}}, 'sdmmc2-b4-0': {'phandle': [[18]], 'pins': {'pinmux': [[7690], [7946], [4874], [5130], [13836], [14092]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc2-b4-od-0': {'phandle': [[19]], 'pins1': {'pinmux': [[7690], [7946], [4874], [5130], [13836]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[14092]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc2-b4-sleep-0': {'phandle': [[20]], 'pins': {'pinmux': [[7697], [7953], [4881], [5137], [13841], [14097]]}}, 'sdmmc1-dir-0': {'pins1': {'pinmux': [[9737], [9993], [6408]], 'slew-rate': [[3]
], 'drive-push-pull': True, 'bias-pull-up': True}, 'pins2': {'pinmux': [[6152]], 'bias-pull-up': True}}, 'sdmmc1-dir-sleep-0': {'pins': {'pinmux': [[9745], [10001], [6417], [6161]]}}, 'usart1-0': {'pins1': {'pinmux': [[7685]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[7941]], 'bias-disable': True}}, 'usart2-0': {'phandle': [[3]], 'pins1': {'pinmux': [[13576]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[13832]], 'bias-disable': True}}, 'usart3-0': {'pins1': {'pinmux': [[6664]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[6920]], 'bias-disable': True}}, 'uart4-0': {'phandle': [[8]], 'pins1': {'pinmux': [[9]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[35081]], 'bias-disable': True}}, 'usbotg-hs-0': {'pins': {'pinmux': [[29707], [35595], [8203], [1291], [779], [4107], [4363], [6667], [6923], [7179], [
7435], [5387]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}}, 'spi1-0': {'phandle': [[9]], 'pins1': {'pinmux': [[1286], [5382]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}, 'pins2': {'pinmux': [[26886]], 'bias-disable': True}}}
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
WARNING: multiple messages have this Message-ID (diff)
From: kernel test robot <rong.a.chen@intel.com>
To: dillon.minfei@gmail.com, robh+dt@kernel.org,
alexandre.torgue@foss.st.com, a.fatoum@pengutronix.de,
mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux@armlinux.org.uk
Cc: kbuild-all@lists.01.org
Subject: Re: [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
Date: Mon, 15 Mar 2021 08:25:57 +0800 [thread overview]
Message-ID: <20210315002557.GL219708@shao2-debian> (raw)
In-Reply-To: <1615530274-31422-7-git-send-email-dillon.minfei@gmail.com>
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on stm32/stm32-next]
[also build test WARNING on robh/for-next soc/for-next v5.12-rc2 next-20210312]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/dillon-minfei-gmail-com/ARM-STM32-add-art-pi-stm32h750xbh6-board-support/20210312-142805
base: https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce: make ARCH=arm dtbs_check
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
"dtcheck warnings: (new ones prefixed by >>)"
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 1476526080, 12288]], 'interrupt-parent': [[22]], 'st,syscfg': [[28, 8]], 'pins-are-numbered': True, 'compatible': ['st,stm32h750-pinctrl'], 'gpio@58020000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[0, 1024]], 'clocks': [[2, 86]], 'st,bank-name': ['GPIOA'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[10]]}, 'gpio@58020400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[1024, 1024]], 'clocks': [[2, 85]], 'st,bank-name': ['GPIOB'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58020800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[2048, 1024]], 'clocks': [[2, 84]], 'st,bank-name': ['GPIOC'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[6]]}, 'gpio@58020c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg':
[[3072, 1024]], 'clocks': [[2, 83]], 'st,bank-name': ['GPIOD'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[4]]}, 'gpio@58021000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[4096, 1024]], 'clocks': [[2, 82]], 'st,bank-name': ['GPIOE'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[5120, 1024]], 'clocks': [[2, 81]], 'st,bank-name': ['GPIOF'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[6144, 1024]], 'clocks': [[2, 80]], 'st,bank-name': ['GPIOG'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58021c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[7168, 1024]], 'clocks': [[2, 79]], 'st,bank-name': ['GPIOH'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58022000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[8192, 1
024]], 'clocks': [[2, 78]], 'st,bank-name': ['GPIOI'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[7]]}, 'gpio@58022400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[9216, 1024]], 'clocks': [[2, 77]], 'st,bank-name': ['GPIOJ'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio@58022800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[10240, 1024]], 'clocks': [[2, 76]], 'st,bank-name': ['GPIOK'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'i2c1-0': {'pins': {'pinmux': [[5637], [5893]], 'bias-disable': True, 'drive-open-drain': True, 'slew-rate': [[0]]}}, 'rmii-0': {'phandle': [[29]], 'pins': {'pinmux': [[27404], [27916], [27660], [9228], [9484], [1804], [8460], [524], [268]], 'slew-rate': [[2]]}}, 'sdmmc1-b4-0': {'phandle': [[14]], 'pins': {'pinmux': [[10253], [10509], [10765], [11021], [11277], [12813]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc1-b4-od-0': {'phandle': [[15
]], 'pins1': {'pinmux': [[10253], [10509], [10765], [11021], [11277]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[12813]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc1-b4-sleep-0': {'phandle': [[16]], 'pins': {'pinmux': [[10257], [10513], [10769], [11025], [11281], [12817]]}}, 'sdmmc2-b4-0': {'phandle': [[18]], 'pins': {'pinmux': [[7690], [7946], [4874], [5130], [13836], [14092]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc2-b4-od-0': {'phandle': [[19]], 'pins1': {'pinmux': [[7690], [7946], [4874], [5130], [13836]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[14092]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc2-b4-sleep-0': {'phandle': [[20]], 'pins': {'pinmux': [[7697], [7953], [4881], [5137], [13841], [14097]]}}, 'sdmmc1-dir-0': {'pins1': {'pinmux': [[9737], [9993], [6408]], 'slew-rate': [[3]
], 'drive-push-pull': True, 'bias-pull-up': True}, 'pins2': {'pinmux': [[6152]], 'bias-pull-up': True}}, 'sdmmc1-dir-sleep-0': {'pins': {'pinmux': [[9745], [10001], [6417], [6161]]}}, 'usart1-0': {'pins1': {'pinmux': [[7685]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[7941]], 'bias-disable': True}}, 'usart2-0': {'phandle': [[3]], 'pins1': {'pinmux': [[13576]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[13832]], 'bias-disable': True}}, 'usart3-0': {'pins1': {'pinmux': [[6664]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[6920]], 'bias-disable': True}}, 'uart4-0': {'phandle': [[8]], 'pins1': {'pinmux': [[9]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[35081]], 'bias-disable': True}}, 'usbotg-hs-0': {'pins': {'pinmux': [[29707], [35595], [8203], [1291], [779], [4107], [4363], [6667], [6923], [7179], [
7435], [5387]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}}, 'spi1-0': {'phandle': [[9]], 'pins1': {'pinmux': [[1286], [5382]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}, 'pins2': {'pinmux': [[26886]], 'bias-disable': True}}}
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c@40005C00', 'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: kernel test robot <rong.a.chen@intel.com>
To: kbuild-all@lists.01.org
Subject: Re: [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
Date: Mon, 15 Mar 2021 08:25:57 +0800 [thread overview]
Message-ID: <20210315002557.GL219708@shao2-debian> (raw)
In-Reply-To: <1615530274-31422-7-git-send-email-dillon.minfei@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 6839 bytes --]
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on stm32/stm32-next]
[also build test WARNING on robh/for-next soc/for-next v5.12-rc2 next-20210312]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/dillon-minfei-gmail-com/ARM-STM32-add-art-pi-stm32h750xbh6-board-support/20210312-142805
base: https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce: make ARCH=arm dtbs_check
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
"dtcheck warnings: (new ones prefixed by >>)"
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: pin-controller: {'type': 'object'} is not allowed for {'#address-cells': [[1]], '#size-cells': [[1]], 'ranges': [[0, 1476526080, 12288]], 'interrupt-parent': [[22]], 'st,syscfg': [[28, 8]], 'pins-are-numbered': True, 'compatible': ['st,stm32h750-pinctrl'], 'gpio(a)58020000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[0, 1024]], 'clocks': [[2, 86]], 'st,bank-name': ['GPIOA'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[10]]}, 'gpio(a)58020400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[1024, 1024]], 'clocks': [[2, 85]], 'st,bank-name': ['GPIOB'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58020800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[2048, 1024]], 'clocks': [[2, 84]], 'st,bank-name': ['GPIOC'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[6]]}, 'gpio(a)58020c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg':
[[3072, 1024]], 'clocks': [[2, 83]], 'st,bank-name': ['GPIOD'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[4]]}, 'gpio(a)58021000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[4096, 1024]], 'clocks': [[2, 82]], 'st,bank-name': ['GPIOE'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58021400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[5120, 1024]], 'clocks': [[2, 81]], 'st,bank-name': ['GPIOF'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58021800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[6144, 1024]], 'clocks': [[2, 80]], 'st,bank-name': ['GPIOG'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58021c00': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[7168, 1024]], 'clocks': [[2, 79]], 'st,bank-name': ['GPIOH'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58022000': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[8192, 1
024]], 'clocks': [[2, 78]], 'st,bank-name': ['GPIOI'], 'interrupt-controller': True, '#interrupt-cells': [[2]], 'phandle': [[7]]}, 'gpio(a)58022400': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[9216, 1024]], 'clocks': [[2, 77]], 'st,bank-name': ['GPIOJ'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'gpio(a)58022800': {'gpio-controller': True, '#gpio-cells': [[2]], 'reg': [[10240, 1024]], 'clocks': [[2, 76]], 'st,bank-name': ['GPIOK'], 'interrupt-controller': True, '#interrupt-cells': [[2]]}, 'i2c1-0': {'pins': {'pinmux': [[5637], [5893]], 'bias-disable': True, 'drive-open-drain': True, 'slew-rate': [[0]]}}, 'rmii-0': {'phandle': [[29]], 'pins': {'pinmux': [[27404], [27916], [27660], [9228], [9484], [1804], [8460], [524], [268]], 'slew-rate': [[2]]}}, 'sdmmc1-b4-0': {'phandle': [[14]], 'pins': {'pinmux': [[10253], [10509], [10765], [11021], [11277], [12813]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc1-b4-od-0': {'phandle': [[15
]], 'pins1': {'pinmux': [[10253], [10509], [10765], [11021], [11277]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[12813]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc1-b4-sleep-0': {'phandle': [[16]], 'pins': {'pinmux': [[10257], [10513], [10769], [11025], [11281], [12817]]}}, 'sdmmc2-b4-0': {'phandle': [[18]], 'pins': {'pinmux': [[7690], [7946], [4874], [5130], [13836], [14092]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}}, 'sdmmc2-b4-od-0': {'phandle': [[19]], 'pins1': {'pinmux': [[7690], [7946], [4874], [5130], [13836]], 'slew-rate': [[3]], 'drive-push-pull': True, 'bias-disable': True}, 'pins2': {'pinmux': [[14092]], 'slew-rate': [[3]], 'drive-open-drain': True, 'bias-disable': True}}, 'sdmmc2-b4-sleep-0': {'phandle': [[20]], 'pins': {'pinmux': [[7697], [7953], [4881], [5137], [13841], [14097]]}}, 'sdmmc1-dir-0': {'pins1': {'pinmux': [[9737], [9993], [6408]], 'slew-rate': [[3]
], 'drive-push-pull': True, 'bias-pull-up': True}, 'pins2': {'pinmux': [[6152]], 'bias-pull-up': True}}, 'sdmmc1-dir-sleep-0': {'pins': {'pinmux': [[9745], [10001], [6417], [6161]]}}, 'usart1-0': {'pins1': {'pinmux': [[7685]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[7941]], 'bias-disable': True}}, 'usart2-0': {'phandle': [[3]], 'pins1': {'pinmux': [[13576]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[13832]], 'bias-disable': True}}, 'usart3-0': {'pins1': {'pinmux': [[6664]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[6920]], 'bias-disable': True}}, 'uart4-0': {'phandle': [[8]], 'pins1': {'pinmux': [[9]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[0]]}, 'pins2': {'pinmux': [[35081]], 'bias-disable': True}}, 'usbotg-hs-0': {'pins': {'pinmux': [[29707], [35595], [8203], [1291], [779], [4107], [4363], [6667], [6923], [7179], [
7435], [5387]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}}, 'spi1-0': {'phandle': [[9]], 'pins1': {'pinmux': [[1286], [5382]], 'bias-disable': True, 'drive-push-pull': True, 'slew-rate': [[2]]}, 'pins2': {'pinmux': [[26886]], 'bias-disable': True}}}
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c(a)40005C00', 'i2c(a)58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'
From schema: /usr/local/lib/python3.9/dist-packages/dtschema/schemas/simple-bus.yaml
>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial(a)40004800: 'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
next prev parent reply other threads:[~2021-03-15 0:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 6:24 [PATCH v2 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 1/8] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 2/8] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 3/8] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 4/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-15 0:25 ` kernel test robot
2021-03-15 0:25 ` kernel test robot
2021-03-15 0:25 ` kernel test robot
2021-03-12 6:24 ` [PATCH v2 5/8] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-15 0:25 ` kernel test robot [this message]
2021-03-15 0:25 ` kernel test robot
2021-03-15 0:25 ` kernel test robot
2021-03-12 6:24 ` [PATCH v2 7/8] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-12 6:24 ` [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support dillon.minfei
2021-03-12 6:24 ` dillon.minfei
2021-03-29 8:00 ` Alexandre TORGUE
2021-03-29 8:00 ` Alexandre TORGUE
2021-03-29 8:07 ` dillon min
2021-03-29 8:07 ` dillon min
2021-03-29 10:13 ` Alexandre TORGUE
2021-03-29 10:13 ` Alexandre TORGUE
2021-03-13 4:49 [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210315002557.GL219708@shao2-debian \
--to=rong.a.chen@intel.com \
--cc=a.fatoum@pengutronix.de \
--cc=alexandre.torgue@foss.st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=dillon.minfei@gmail.com \
--cc=kbuild-all@lists.01.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.