From: Alexandre TORGUE <alexandre.torgue@foss.st.com> To: <dillon.minfei@gmail.com>, <robh+dt@kernel.org>, <a.fatoum@pengutronix.de>, <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux@armlinux.org.uk>, <vladimir.murzin@arm.com>, <afzal.mohd.ma@gmail.com> Subject: Re: [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support Date: Mon, 29 Mar 2021 10:00:11 +0200 [thread overview] Message-ID: <eb2437ef-ecd2-e258-b77b-2fe9f70205f2@foss.st.com> (raw) In-Reply-To: <1615530274-31422-9-git-send-email-dillon.minfei@gmail.com> Hi Dillon On 3/12/21 7:24 AM, dillon.minfei@gmail.com wrote: > From: dillon min <dillon.minfei@gmail.com> > > This patch adds STM32H750 pinctrl and GPIO support > since stm32h750 has the same pin alternate functions > with stm32h743, so just reuse the stm32h743's pinctrl > driver > > Signed-off-by: dillon min <dillon.minfei@gmail.com> > --- > v2: > - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they > have same pin alternate functions > - add STM32H750 to Kconfig description > > drivers/pinctrl/stm32/Kconfig | 2 +- > drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 +++ > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig > index f36f29113370..fb1ffc94c57f 100644 > --- a/drivers/pinctrl/stm32/Kconfig > +++ b/drivers/pinctrl/stm32/Kconfig > @@ -35,7 +35,7 @@ config PINCTRL_STM32F769 > select PINCTRL_STM32 > > config PINCTRL_STM32H743 > - bool "STMicroelectronics STM32H743 pin control" if COMPILE_TEST && !MACH_STM32H743 > + bool "STMicroelectronics STM32H743/STM32H750 pin control" if COMPILE_TEST && !MACH_STM32H743 > depends on OF && HAS_IOMEM > default MACH_STM32H743 > select PINCTRL_STM32 > diff --git a/drivers/pinctrl/stm32/pinctrl-stm32h743.c b/drivers/pinctrl/stm32/pinctrl-stm32h743.c > index ffe7b5271506..700206c7bc11 100644 > --- a/drivers/pinctrl/stm32/pinctrl-stm32h743.c > +++ b/drivers/pinctrl/stm32/pinctrl-stm32h743.c > @@ -1966,6 +1966,9 @@ static const struct of_device_id stm32h743_pctrl_match[] = { > .compatible = "st,stm32h743-pinctrl", > .data = &stm32h743_match_data, > }, > + { .compatible = "st,stm32h750-pinctrl", > + .data = &stm32h743_match_data, > + }, If you use exactly the same driver (i.e. same ball out and AF mux) then you don't have to create a new compatible for that. Just use the same than h743.(so you don't have to factorize DT files). Regards Alex > { } > }; > >
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre TORGUE <alexandre.torgue@foss.st.com> To: <dillon.minfei@gmail.com>, <robh+dt@kernel.org>, <a.fatoum@pengutronix.de>, <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux@armlinux.org.uk>, <vladimir.murzin@arm.com>, <afzal.mohd.ma@gmail.com> Subject: Re: [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support Date: Mon, 29 Mar 2021 10:00:11 +0200 [thread overview] Message-ID: <eb2437ef-ecd2-e258-b77b-2fe9f70205f2@foss.st.com> (raw) In-Reply-To: <1615530274-31422-9-git-send-email-dillon.minfei@gmail.com> Hi Dillon On 3/12/21 7:24 AM, dillon.minfei@gmail.com wrote: > From: dillon min <dillon.minfei@gmail.com> > > This patch adds STM32H750 pinctrl and GPIO support > since stm32h750 has the same pin alternate functions > with stm32h743, so just reuse the stm32h743's pinctrl > driver > > Signed-off-by: dillon min <dillon.minfei@gmail.com> > --- > v2: > - add compatible string st,stm32h750-pinctrl to pinctl-stm32h743.c as they > have same pin alternate functions > - add STM32H750 to Kconfig description > > drivers/pinctrl/stm32/Kconfig | 2 +- > drivers/pinctrl/stm32/pinctrl-stm32h743.c | 3 +++ > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig > index f36f29113370..fb1ffc94c57f 100644 > --- a/drivers/pinctrl/stm32/Kconfig > +++ b/drivers/pinctrl/stm32/Kconfig > @@ -35,7 +35,7 @@ config PINCTRL_STM32F769 > select PINCTRL_STM32 > > config PINCTRL_STM32H743 > - bool "STMicroelectronics STM32H743 pin control" if COMPILE_TEST && !MACH_STM32H743 > + bool "STMicroelectronics STM32H743/STM32H750 pin control" if COMPILE_TEST && !MACH_STM32H743 > depends on OF && HAS_IOMEM > default MACH_STM32H743 > select PINCTRL_STM32 > diff --git a/drivers/pinctrl/stm32/pinctrl-stm32h743.c b/drivers/pinctrl/stm32/pinctrl-stm32h743.c > index ffe7b5271506..700206c7bc11 100644 > --- a/drivers/pinctrl/stm32/pinctrl-stm32h743.c > +++ b/drivers/pinctrl/stm32/pinctrl-stm32h743.c > @@ -1966,6 +1966,9 @@ static const struct of_device_id stm32h743_pctrl_match[] = { > .compatible = "st,stm32h743-pinctrl", > .data = &stm32h743_match_data, > }, > + { .compatible = "st,stm32h750-pinctrl", > + .data = &stm32h743_match_data, > + }, If you use exactly the same driver (i.e. same ball out and AF mux) then you don't have to create a new compatible for that. Just use the same than h743.(so you don't have to factorize DT files). Regards Alex > { } > }; > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-29 8:01 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-12 6:24 [PATCH v2 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 1/8] Documentation: arm: stm32: Add stm32h750 value line doc dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 2/8] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 3/8] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 4/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-15 0:25 ` kernel test robot 2021-03-15 0:25 ` kernel test robot 2021-03-15 0:25 ` kernel test robot 2021-03-12 6:24 ` [PATCH v2 5/8] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 6/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-15 0:25 ` kernel test robot 2021-03-15 0:25 ` kernel test robot 2021-03-15 0:25 ` kernel test robot 2021-03-12 6:24 ` [PATCH v2 7/8] ARM: stm32: Add a new SOC - STM32H750 dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-12 6:24 ` [PATCH v2 8/8] pinctrl: stm32: Add STM32H750 MCU pinctrl support dillon.minfei 2021-03-12 6:24 ` dillon.minfei 2021-03-29 8:00 ` Alexandre TORGUE [this message] 2021-03-29 8:00 ` Alexandre TORGUE 2021-03-29 8:07 ` dillon min 2021-03-29 8:07 ` dillon min 2021-03-29 10:13 ` Alexandre TORGUE 2021-03-29 10:13 ` Alexandre TORGUE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=eb2437ef-ecd2-e258-b77b-2fe9f70205f2@foss.st.com \ --to=alexandre.torgue@foss.st.com \ --cc=a.fatoum@pengutronix.de \ --cc=afzal.mohd.ma@gmail.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=dillon.minfei@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ --cc=vladimir.murzin@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.