* [PATCH 2/6] oeqa/manual/bsp-hw.json : remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP manual test
2021-04-22 1:11 [PATCH 1/6] oeqa/manual/bsp-hw.json : remove boot_from_runlevel_3 and boot_from_runlevel_5 manual test Teoh, Jay Shen
@ 2021-04-22 1:11 ` Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 3/6] oeqa/manual/bsp-hw.json : remove standby and Test_if_LAN_device_works_well_after_resume_from_suspend_state " Teoh, Jay Shen
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Teoh, Jay Shen @ 2021-04-22 1:11 UTC (permalink / raw)
To: openembedded-core
From: Teoh Jay Shen <jay.shen.teoh@intel.com>
Remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP test as they was replaced by the new automated runtime oeqa/runtime/cases/ethernet_ip_connman.py.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
meta/lib/oeqa/manual/bsp-hw.json | 64 --------------------------------
1 file changed, 64 deletions(-)
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index 5c3719f093..0c13d116d6 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -89,70 +89,6 @@
"summary": "switch_among_multi_applications_and_desktop"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "Boot the system and check internet connection is on . ",
- "expected_results": ""
- },
- "2": {
- "action": "Launch connmand-properties (up-right corner on desktop)",
- "expected_results": ""
- },
- "3": {
- "action": "Choose Ethernet device and set a valid static ip address for it. \nFor example, in our internal network, we can set as following: \nip address: 10.239.48.xxx \nMask: 255.255.255.0 \nGateway (Broadcast): 10.239.48.255",
- "expected_results": ""
- },
- "4": {
- "action": "Check the Network configuration with \"ifconfig\"",
- "expected_results": "Static IP was set successfully \n"
- },
- "5": {
- "action": "ping to another IP adress",
- "expected_results": "Ping works correclty\n"
- }
- },
- "summary": "ethernet_static_ip_set_in_connman"
- }
- },
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "Launch connmand-properties (up-right corner on your desktop). ",
- "expected_results": ""
- },
- "2": {
- "action": "Check if Ethernet device can work properly with static IP, doing \"ping XXX.XXX.XXX.XXX\", once this is set.",
- "expected_results": "Ping executed successfully . \n\n"
- },
- "3": {
- "action": "Then choose DHCP method for Ethernet device in connmand-properties.",
- "expected_results": ""
- },
- "4": {
- "action": "Check with 'ifconfig\" and \"ping\" if Ethernet device get IP address via DHCP.",
- "expected_results": "Ethernet device can get dynamic IP address via DHCP in connmand ."
- }
- },
- "summary": "ethernet_get_IP_in_connman_via_DHCP"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome",
--
2.29.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/6] oeqa/manual/bsp-hw.json : remove standby and Test_if_LAN_device_works_well_after_resume_from_suspend_state manual test
2021-04-22 1:11 [PATCH 1/6] oeqa/manual/bsp-hw.json : remove boot_from_runlevel_3 and boot_from_runlevel_5 manual test Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 2/6] oeqa/manual/bsp-hw.json : remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP " Teoh, Jay Shen
@ 2021-04-22 1:11 ` Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 4/6] oeqa/manual/bsp-hw.json : remove click_terminal_icon_on_X_desktop " Teoh, Jay Shen
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Teoh, Jay Shen @ 2021-04-22 1:11 UTC (permalink / raw)
To: openembedded-core
From: Teoh Jay Shen <jay.shen.teoh@intel.com>
Remove standby and Test_if_LAN_device_works_well_after_resume_from_suspend_state test as they was replaced by the new automated runtime oeqa/runtime/cases/suspend.py.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
meta/lib/oeqa/manual/bsp-hw.json | 64 --------------------------------
1 file changed, 64 deletions(-)
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index 0c13d116d6..5eceb741a5 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -111,40 +111,6 @@
"summary": "connman_offline_mode_in_connman-gnome"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.standby",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "boot system and launch terminal; check output of \"date\" and launch script \"continue.sh\"",
- "expected_results": ""
- },
- "2": {
- "action": "echo \"mem\" > /sys/power/state",
- "expected_results": ""
- },
- "3": {
- "action": "After system go into S3 mode, move mouse or press any key to make it resume (on NUC press power button)",
- "expected_results": ""
- },
- "4": {
- "action": "Check \"date\" and script \"continue.sh\"",
- "expected_results": ""
- },
- "5": {
- "action": "Check if application can work as normal \ncontinue.sh as below: \n \n#!/bin/sh \n \ni=1 \nwhile [ 0 ] \ndo \n echo $i \n sleep 1 \n i=$((i+1)) \ndone ",
- "expected_results": "Screen should resume back and script can run continuously incrementing the i's value from where it was before going to standby state. Date should be the same with the corresponding time increment."
- }
- },
- "summary": "standby"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.check_CPU_utilization_after_standby",
@@ -175,36 +141,6 @@
"summary": "check_CPU_utilization_after_standby"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "boot system and launch terminal",
- "expected_results": ""
- },
- "2": {
- "action": "echo \"mem\" > /sys/power/state",
- "expected_results": ""
- },
- "3": {
- "action": "After system go into S3 mode, move mouse or press any key to make it resume",
- "expected_results": ""
- },
- "4": {
- "action": "check ping status \n\nNote: This TC apply only for core-image-full-cmd.",
- "expected_results": "ping should always work before/after standby"
- }
- },
- "summary": "Test_if_LAN_device_works_well_after_resume_from_suspend_state"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state",
--
2.29.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 4/6] oeqa/manual/bsp-hw.json : remove click_terminal_icon_on_X_desktop manual test
2021-04-22 1:11 [PATCH 1/6] oeqa/manual/bsp-hw.json : remove boot_from_runlevel_3 and boot_from_runlevel_5 manual test Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 2/6] oeqa/manual/bsp-hw.json : remove ethernet_static_ip_set_in_connman and ethernet_get_IP_in_connman_via_DHCP " Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 3/6] oeqa/manual/bsp-hw.json : remove standby and Test_if_LAN_device_works_well_after_resume_from_suspend_state " Teoh, Jay Shen
@ 2021-04-22 1:11 ` Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 5/6] oeqa/manual/bsp-hw.json :remove Check_if_RTC_(Real_Time_Clock)_can_work_correctly " Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 6/6] oeqa/manual/bsp-hw.json : remove Test_if_usb_hid_device_works_well_after_resume_from_suspend_state " Teoh, Jay Shen
4 siblings, 0 replies; 6+ messages in thread
From: Teoh, Jay Shen @ 2021-04-22 1:11 UTC (permalink / raw)
To: openembedded-core
From: Teoh Jay Shen <jay.shen.teoh@intel.com>
Remove the click_terminal_icon_on_X_desktop test as it was replaced by the new automated runtime oeqa/runtime/cases/terminal.py.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
meta/lib/oeqa/manual/bsp-hw.json | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index 5eceb741a5..bd61cf2c79 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -171,28 +171,6 @@
"summary": "Test_if_usb_hid_device_works_well_after_resume_from_suspend_state"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "After system launch and X start up, click terminal icon on desktop",
- "expected_results": ""
- },
- "2": {
- "action": "Check if only one terminal window launched and no other problem met",
- "expected_results": "There should be no problem after launching terminal . "
- }
- },
- "summary": "click_terminal_icon_on_X_desktop"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.Add_multiple_files_in_media_player",
--
2.29.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 5/6] oeqa/manual/bsp-hw.json :remove Check_if_RTC_(Real_Time_Clock)_can_work_correctly manual test
2021-04-22 1:11 [PATCH 1/6] oeqa/manual/bsp-hw.json : remove boot_from_runlevel_3 and boot_from_runlevel_5 manual test Teoh, Jay Shen
` (2 preceding siblings ...)
2021-04-22 1:11 ` [PATCH 4/6] oeqa/manual/bsp-hw.json : remove click_terminal_icon_on_X_desktop " Teoh, Jay Shen
@ 2021-04-22 1:11 ` Teoh, Jay Shen
2021-04-22 1:11 ` [PATCH 6/6] oeqa/manual/bsp-hw.json : remove Test_if_usb_hid_device_works_well_after_resume_from_suspend_state " Teoh, Jay Shen
4 siblings, 0 replies; 6+ messages in thread
From: Teoh, Jay Shen @ 2021-04-22 1:11 UTC (permalink / raw)
To: openembedded-core
From: Teoh Jay Shen <jay.shen.teoh@intel.com>
Remove the Check_if_RTC_(Real_Time_Clock)_can_work_correctly test as it was replaced by the new automated runtime oeqa/runtime/cases/rtc.py.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
meta/lib/oeqa/manual/bsp-hw.json | 34 --------------------------------
1 file changed, 34 deletions(-)
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index bd61cf2c79..48e8fe48e1 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -623,40 +623,6 @@
"summary": "Check_if_watchdog_can_reset_the_target_system"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly",
- "author": [
- {
- "email": "yi.zhao@windriver.com",
- "name": "yi.zhao@windriver.com"
- }
- ],
- "execution": {
- "1": {
- "action": "Read time from RTC registers. root@localhost:/root> hwclock -r Sun Mar 22 04:05:47 1970 -0.001948 seconds ",
- "expected_results": "Can read and set the time from RTC.\n"
- },
- "2": {
- "action": "Set system current time root@localhost:/root> date 062309452008 ",
- "expected_results": ""
- },
- "3": {
- "action": "Synchronize the system current time to RTC registers root@localhost:/root> hwclock -w ",
- "expected_results": ""
- },
- "4": {
- "action": "Read time from RTC registers root@localhost:/root> hwclock -r ",
- "expected_results": ""
- },
- "5": {
- "action": "Reboot target and read time from RTC again\n",
- "expected_results": ""
- }
- },
- "summary": "Check_if_RTC_(Real_Time_Clock)_can_work_correctly"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.System_can_boot_up_via_NFS",
--
2.29.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 6/6] oeqa/manual/bsp-hw.json : remove Test_if_usb_hid_device_works_well_after_resume_from_suspend_state manual test
2021-04-22 1:11 [PATCH 1/6] oeqa/manual/bsp-hw.json : remove boot_from_runlevel_3 and boot_from_runlevel_5 manual test Teoh, Jay Shen
` (3 preceding siblings ...)
2021-04-22 1:11 ` [PATCH 5/6] oeqa/manual/bsp-hw.json :remove Check_if_RTC_(Real_Time_Clock)_can_work_correctly " Teoh, Jay Shen
@ 2021-04-22 1:11 ` Teoh, Jay Shen
4 siblings, 0 replies; 6+ messages in thread
From: Teoh, Jay Shen @ 2021-04-22 1:11 UTC (permalink / raw)
To: openembedded-core
From: Teoh Jay Shen <jay.shen.teoh@intel.com>
Remove the Test_if_usb_hid_device_works_well_after_resume_from_suspend_state test as it was replaced by the new automated runtime oeqa/runtime/cases/usb_hid.py.
Signed-off-by: Teoh Jay Shen <jay.shen.teoh@intel.com>
---
meta/lib/oeqa/manual/bsp-hw.json | 30 ------------------------------
1 file changed, 30 deletions(-)
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json
index 48e8fe48e1..ca91987e31 100644
--- a/meta/lib/oeqa/manual/bsp-hw.json
+++ b/meta/lib/oeqa/manual/bsp-hw.json
@@ -141,36 +141,6 @@
"summary": "check_CPU_utilization_after_standby"
}
},
- {
- "test": {
- "@alias": "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state",
- "author": [
- {
- "email": "alexandru.c.georgescu@intel.com",
- "name": "alexandru.c.georgescu@intel.com"
- }
- ],
- "execution": {
- "1": {
- "action": "boot system and launch terminal",
- "expected_results": ""
- },
- "2": {
- "action": "echo \"mem\" > /sys/power/state",
- "expected_results": ""
- },
- "3": {
- "action": "After system go into S3 mode, resume the device by pressing the power button or using HID devices",
- "expected_results": "Devices resumes "
- },
- "4": {
- "action": "check usb mouse and keyboard",
- "expected_results": "Usb mouse and keyboard should work"
- }
- },
- "summary": "Test_if_usb_hid_device_works_well_after_resume_from_suspend_state"
- }
- },
{
"test": {
"@alias": "bsps-hw.bsps-hw.Add_multiple_files_in_media_player",
--
2.29.0
^ permalink raw reply related [flat|nested] 6+ messages in thread