All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, l.stach@pengutronix.de, krzk@kernel.org,
	agx@sigxcpu.org, marex@denx.de, andrew.smirnov@gmail.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, ping.bai@nxp.com,
	frieder.schrempf@kontron.de, aford173@gmail.com,
	abel.vesa@nxp.com
Subject: [PATCH 03/16] soc: imx: gpcv2: switch to clk_bulk_* API
Date: Thu, 29 Apr 2021 15:30:37 +0800	[thread overview]
Message-ID: <20210429073050.21039-4-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20210429073050.21039-1-peng.fan@oss.nxp.com>

From: Lucas Stach <l.stach@pengutronix.de>

Use clk_bulk API to simplify the code a bit. Also add some error
checking to the clk_prepare_enable calls.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/soc/imx/gpcv2.c | 60 +++++++++--------------------------------
 1 file changed, 12 insertions(+), 48 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 552d3e6bee52..1d90c7802972 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -100,13 +100,11 @@
 
 #define GPC_PGC_CTRL_PCR		BIT(0)
 
-#define GPC_CLK_MAX		6
-
 struct imx_pgc_domain {
 	struct generic_pm_domain genpd;
 	struct regmap *regmap;
 	struct regulator *regulator;
-	struct clk *clk[GPC_CLK_MAX];
+	struct clk_bulk_data *clks;
 	int num_clks;
 
 	unsigned int pgc;
@@ -149,8 +147,12 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 	}
 
 	/* Enable reset clocks for all devices in the domain */
-	for (i = 0; i < domain->num_clks; i++)
-		clk_prepare_enable(domain->clk[i]);
+	clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+	if (ret) {
+		dev_err(domain->dev, "failed to enable reset clocks\n");
+		regulator_disable(domain->regulator);
+		return ret;
+	}
 
 	if (enable_power_control)
 		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
@@ -187,8 +189,7 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 				   GPC_PGC_CTRL_PCR, 0);
 
 	/* Disable reset clocks for all devices in the domain */
-	for (i = 0; i < domain->num_clks; i++)
-		clk_disable_unprepare(domain->clk[i]);
+	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
 
 	if (has_regulator && !on) {
 		int err;
@@ -438,41 +439,6 @@ static const struct imx_pgc_domain_data imx8m_pgc_domain_data = {
 	.reg_access_table = &imx8m_access_table,
 };
 
-static int imx_pgc_get_clocks(struct imx_pgc_domain *domain)
-{
-	int i, ret;
-
-	for (i = 0; ; i++) {
-		struct clk *clk = of_clk_get(domain->dev->of_node, i);
-		if (IS_ERR(clk))
-			break;
-		if (i >= GPC_CLK_MAX) {
-			dev_err(domain->dev, "more than %d clocks\n",
-				GPC_CLK_MAX);
-			ret = -EINVAL;
-			goto clk_err;
-		}
-		domain->clk[i] = clk;
-	}
-	domain->num_clks = i;
-
-	return 0;
-
-clk_err:
-	while (i--)
-		clk_put(domain->clk[i]);
-
-	return ret;
-}
-
-static void imx_pgc_put_clocks(struct imx_pgc_domain *domain)
-{
-	int i;
-
-	for (i = domain->num_clks - 1; i >= 0; i--)
-		clk_put(domain->clk[i]);
-}
-
 static int imx_pgc_domain_probe(struct platform_device *pdev)
 {
 	struct imx_pgc_domain *domain = pdev->dev.platform_data;
@@ -490,9 +456,10 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 				      domain->voltage, domain->voltage);
 	}
 
-	ret = imx_pgc_get_clocks(domain);
-	if (ret)
-		return dev_err_probe(domain->dev, ret, "Failed to get domain's clocks\n");
+	domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
+	if (domain->num_clks < 0)
+		return dev_err_probe(domain->dev, domain->num_clks,
+				     "Failed to get domain's clocks\n");
 
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, domain->bits.map);
@@ -517,7 +484,6 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 out_domain_unmap:
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, 0);
-	imx_pgc_put_clocks(domain);
 
 	return ret;
 }
@@ -532,8 +498,6 @@ static int imx_pgc_domain_remove(struct platform_device *pdev)
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, 0);
 
-	imx_pgc_put_clocks(domain);
-
 	return 0;
 }
 
-- 
2.30.0


WARNING: multiple messages have this Message-ID (diff)
From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, l.stach@pengutronix.de, krzk@kernel.org,
	agx@sigxcpu.org, marex@denx.de, andrew.smirnov@gmail.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, ping.bai@nxp.com,
	frieder.schrempf@kontron.de, aford173@gmail.com,
	abel.vesa@nxp.com
Subject: [PATCH 03/16] soc: imx: gpcv2: switch to clk_bulk_* API
Date: Thu, 29 Apr 2021 15:30:37 +0800	[thread overview]
Message-ID: <20210429073050.21039-4-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20210429073050.21039-1-peng.fan@oss.nxp.com>

From: Lucas Stach <l.stach@pengutronix.de>

Use clk_bulk API to simplify the code a bit. Also add some error
checking to the clk_prepare_enable calls.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/soc/imx/gpcv2.c | 60 +++++++++--------------------------------
 1 file changed, 12 insertions(+), 48 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 552d3e6bee52..1d90c7802972 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -100,13 +100,11 @@
 
 #define GPC_PGC_CTRL_PCR		BIT(0)
 
-#define GPC_CLK_MAX		6
-
 struct imx_pgc_domain {
 	struct generic_pm_domain genpd;
 	struct regmap *regmap;
 	struct regulator *regulator;
-	struct clk *clk[GPC_CLK_MAX];
+	struct clk_bulk_data *clks;
 	int num_clks;
 
 	unsigned int pgc;
@@ -149,8 +147,12 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 	}
 
 	/* Enable reset clocks for all devices in the domain */
-	for (i = 0; i < domain->num_clks; i++)
-		clk_prepare_enable(domain->clk[i]);
+	clk_bulk_prepare_enable(domain->num_clks, domain->clks);
+	if (ret) {
+		dev_err(domain->dev, "failed to enable reset clocks\n");
+		regulator_disable(domain->regulator);
+		return ret;
+	}
 
 	if (enable_power_control)
 		regmap_update_bits(domain->regmap, GPC_PGC_CTRL(domain->pgc),
@@ -187,8 +189,7 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
 				   GPC_PGC_CTRL_PCR, 0);
 
 	/* Disable reset clocks for all devices in the domain */
-	for (i = 0; i < domain->num_clks; i++)
-		clk_disable_unprepare(domain->clk[i]);
+	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
 
 	if (has_regulator && !on) {
 		int err;
@@ -438,41 +439,6 @@ static const struct imx_pgc_domain_data imx8m_pgc_domain_data = {
 	.reg_access_table = &imx8m_access_table,
 };
 
-static int imx_pgc_get_clocks(struct imx_pgc_domain *domain)
-{
-	int i, ret;
-
-	for (i = 0; ; i++) {
-		struct clk *clk = of_clk_get(domain->dev->of_node, i);
-		if (IS_ERR(clk))
-			break;
-		if (i >= GPC_CLK_MAX) {
-			dev_err(domain->dev, "more than %d clocks\n",
-				GPC_CLK_MAX);
-			ret = -EINVAL;
-			goto clk_err;
-		}
-		domain->clk[i] = clk;
-	}
-	domain->num_clks = i;
-
-	return 0;
-
-clk_err:
-	while (i--)
-		clk_put(domain->clk[i]);
-
-	return ret;
-}
-
-static void imx_pgc_put_clocks(struct imx_pgc_domain *domain)
-{
-	int i;
-
-	for (i = domain->num_clks - 1; i >= 0; i--)
-		clk_put(domain->clk[i]);
-}
-
 static int imx_pgc_domain_probe(struct platform_device *pdev)
 {
 	struct imx_pgc_domain *domain = pdev->dev.platform_data;
@@ -490,9 +456,10 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 				      domain->voltage, domain->voltage);
 	}
 
-	ret = imx_pgc_get_clocks(domain);
-	if (ret)
-		return dev_err_probe(domain->dev, ret, "Failed to get domain's clocks\n");
+	domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
+	if (domain->num_clks < 0)
+		return dev_err_probe(domain->dev, domain->num_clks,
+				     "Failed to get domain's clocks\n");
 
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, domain->bits.map);
@@ -517,7 +484,6 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
 out_domain_unmap:
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, 0);
-	imx_pgc_put_clocks(domain);
 
 	return ret;
 }
@@ -532,8 +498,6 @@ static int imx_pgc_domain_remove(struct platform_device *pdev)
 	regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
 			   domain->bits.map, 0);
 
-	imx_pgc_put_clocks(domain);
-
 	return 0;
 }
 
-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-04-29  6:59 UTC|newest]

Thread overview: 82+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-29  7:30 [PATCH 00/16] soc: imx: gpcv2: support i.MX8MM Peng Fan (OSS)
2021-04-29  7:30 ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 01/16] soc: imx: gpcv2: move to more ideomatic error handling in probe Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 13:26   ` Frieder Schrempf
2021-05-03 13:26     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 02/16] soc: imx: gpcv2: move domain mapping to domain driver probe Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 13:27   ` Frieder Schrempf
2021-05-03 13:27     ` Frieder Schrempf
2021-04-29  7:30 ` Peng Fan (OSS) [this message]
2021-04-29  7:30   ` [PATCH 03/16] soc: imx: gpcv2: switch to clk_bulk_* API Peng Fan (OSS)
2021-05-03 13:37   ` Frieder Schrempf
2021-05-03 13:37     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 04/16] soc: imx: gpcv2: split power up and power down sequence control Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:13   ` Frieder Schrempf
2021-05-03 14:13     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 05/16] soc: imx: gpcv2: wait for ADB400 handshake Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 06/16] soc: imx: gpcv2: add runtime PM support for power-domains Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:18   ` Frieder Schrempf
2021-05-03 14:18     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 07/16] soc: imx: gpcv2: allow domains without power-sequence control Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:21   ` Frieder Schrempf
2021-05-03 14:21     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 08/16] dt-bindings: imx: gpcv2: add support for optional resets Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:27   ` Frieder Schrempf
2021-05-03 14:27     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 09/16] soc: " Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:30   ` Frieder Schrempf
2021-05-03 14:30     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 10/16] dt-bindings: power: add defines for i.MX8MM power domains Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 19:37   ` Rob Herring
2021-05-03 19:37     ` Rob Herring
2021-04-29  7:30 ` [PATCH 11/16] soc: imx: gpcv2: add support " Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-05-03 14:37   ` Frieder Schrempf
2021-05-03 14:37     ` Frieder Schrempf
2021-04-29  7:30 ` [PATCH 12/16] soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX " Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 13/16] soc: imx: gpcv2: correct pm_runtime_get_sync usage Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29 14:25   ` Lucas Stach
2021-04-29 14:25     ` Lucas Stach
2021-04-30  4:43     ` Peng Fan (OSS)
2021-04-30  4:43       ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 14/16] soc: imx: gpcv2: move reset assert after requesting domain power up Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29 14:28   ` Lucas Stach
2021-04-29 14:28     ` Lucas Stach
2021-04-30  4:51     ` Peng Fan (OSS)
2021-04-30  4:51       ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 15/16] soc: imx: gpcv2: support reset defer probe Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29  8:39   ` Ahmad Fatoum
2021-04-29  8:39     ` Ahmad Fatoum
2021-04-29 14:30   ` Lucas Stach
2021-04-29 14:30     ` Lucas Stach
2021-04-30  4:51     ` Peng Fan (OSS)
2021-04-30  4:51       ` Peng Fan (OSS)
2021-04-29  7:30 ` [PATCH 16/16] soc: imx: gpcv2: remove waiting handshake in power up Peng Fan (OSS)
2021-04-29  7:30   ` Peng Fan (OSS)
2021-04-29 14:34   ` Lucas Stach
2021-04-29 14:34     ` Lucas Stach
2021-04-30  4:52     ` Peng Fan (OSS)
2021-04-30  4:52       ` Peng Fan (OSS)
2021-04-30  7:14     ` Peng Fan (OSS)
2021-04-30  7:14       ` Peng Fan (OSS)
2021-04-30  8:47       ` Lucas Stach
2021-04-30  8:47         ` Lucas Stach
2021-04-29 12:39 ` [PATCH 00/16] soc: imx: gpcv2: support i.MX8MM Adam Ford
2021-04-29 12:39   ` Adam Ford
2021-04-30  1:33   ` Peng Fan
2021-04-30  1:33     ` Peng Fan
2021-04-30  3:05     ` Adam Ford
2021-04-30  3:05       ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210429073050.21039-4-peng.fan@oss.nxp.com \
    --to=peng.fan@oss.nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=aford173@gmail.com \
    --cc=agx@sigxcpu.org \
    --cc=andrew.smirnov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.