From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Date: Fri, 14 May 2021 15:43:59 +0200 [thread overview] Message-ID: <20210514134405.2097464-2-t.schramm@manjaro.org> (raw) In-Reply-To: <20210514134405.2097464-1-t.schramm@manjaro.org> The Allwinner V3s and V3 feature a DMA controller. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index eb4cb63fef13..f0296ab46137 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -1,5 +1,6 @@ /* * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -172,6 +173,15 @@ nmi_intc: interrupt-controller@1c000d0 { interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-v3s-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Date: Fri, 14 May 2021 15:43:59 +0200 [thread overview] Message-ID: <20210514134405.2097464-2-t.schramm@manjaro.org> (raw) In-Reply-To: <20210514134405.2097464-1-t.schramm@manjaro.org> The Allwinner V3s and V3 feature a DMA controller. This commit adds it to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index eb4cb63fef13..f0296ab46137 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -1,5 +1,6 @@ /* * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> + * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -172,6 +173,15 @@ nmi_intc: interrupt-controller@1c000d0 { interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-v3s-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-14 13:42 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm 2021-05-14 13:43 ` Tobias Schramm 2021-05-14 13:43 ` Tobias Schramm [this message] 2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 1:29 ` Rob Herring 2021-05-18 1:29 ` Rob Herring 2021-05-14 13:44 ` [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 1:29 ` Rob Herring 2021-05-18 1:29 ` Rob Herring 2021-05-14 13:44 ` [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 15:19 ` [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Maxime Ripard 2021-05-18 15:19 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210514134405.2097464-2-t.schramm@manjaro.org \ --to=t.schramm@manjaro.org \ --cc=devicetree@vger.kernel.org \ --cc=jernej.skrabec@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.