From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Date: Fri, 14 May 2021 15:44:01 +0200 [thread overview] Message-ID: <20210514134405.2097464-4-t.schramm@manjaro.org> (raw) In-Reply-To: <20210514134405.2097464-1-t.schramm@manjaro.org> The Allwinner V3s and V3 SoCs feature an integrated analog audio codec. Additionally both have an analog frontend with mixers and amplifiers for the codec. This commit adds both, the analog codec and its frontend to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3eaa8703e2ac..236cf45bba91 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -441,6 +441,25 @@ lradc: lradc@1c22800 { status = "disabled"; }; + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3s-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + codec_analog: codec-analog@1c23000 { + compatible = "allwinner,sun8i-v3s-codec-analog"; + reg = <0x01c23000 0x4>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Tobias Schramm <t.schramm@manjaro.org> To: "Jernej Škrabec" <jernej.skrabec@gmail.com>, "Rob Herring" <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, Tobias Schramm <t.schramm@manjaro.org> Subject: [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Date: Fri, 14 May 2021 15:44:01 +0200 [thread overview] Message-ID: <20210514134405.2097464-4-t.schramm@manjaro.org> (raw) In-Reply-To: <20210514134405.2097464-1-t.schramm@manjaro.org> The Allwinner V3s and V3 SoCs feature an integrated analog audio codec. Additionally both have an analog frontend with mixers and amplifiers for the codec. This commit adds both, the analog codec and its frontend to the V3s dtsi. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> --- arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 3eaa8703e2ac..236cf45bba91 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -441,6 +441,25 @@ lradc: lradc@1c22800 { status = "disabled"; }; + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3s-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + codec_analog: codec-analog@1c23000 { + compatible = "allwinner,sun8i-v3s-codec-analog"; + reg = <0x01c23000 0x4>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-05-14 13:42 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm 2021-05-14 13:43 ` Tobias Schramm 2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm 2021-05-14 13:43 ` Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm [this message] 2021-05-14 13:44 ` [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 1:29 ` Rob Herring 2021-05-18 1:29 ` Rob Herring 2021-05-14 13:44 ` [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 1:29 ` Rob Herring 2021-05-18 1:29 ` Rob Herring 2021-05-14 13:44 ` [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm 2021-05-14 13:44 ` Tobias Schramm 2021-05-18 15:19 ` [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Maxime Ripard 2021-05-18 15:19 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210514134405.2097464-4-t.schramm@manjaro.org \ --to=t.schramm@manjaro.org \ --cc=devicetree@vger.kernel.org \ --cc=jernej.skrabec@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.