[PATCH 12/27] ppc: Remove caddy2 / vme8349 boards

[Tom Rini <trini@konsulko.com>]

These boards have not been converted to CONFIG_DM_PCI by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.

Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/powerpc/cpu/mpc83xx/Kconfig |   9 -
 board/esd/vme8349/Kconfig        |  25 ---
 board/esd/vme8349/MAINTAINERS    |   7 -
 board/esd/vme8349/Makefile       |   9 -
 board/esd/vme8349/caddy.c        | 178 -----------------
 board/esd/vme8349/caddy.h        |  59 ------
 board/esd/vme8349/pci.c          | 118 ------------
 board/esd/vme8349/vme8349.c      | 213 ---------------------
 board/esd/vme8349/vme8349pin.h   |  18 --
 configs/caddy2_defconfig         | 123 ------------
 configs/vme8349_defconfig        | 134 -------------
 drivers/pci/pci_auto.c           |   3 +-
 include/configs/caddy2.h         | 315 -------------------------------
 include/configs/vme8349.h        | 315 -------------------------------
 14 files changed, 1 insertion(+), 1525 deletions(-)
 delete mode 100644 board/esd/vme8349/Kconfig
 delete mode 100644 board/esd/vme8349/MAINTAINERS
 delete mode 100644 board/esd/vme8349/Makefile
 delete mode 100644 board/esd/vme8349/caddy.c
 delete mode 100644 board/esd/vme8349/caddy.h
 delete mode 100644 board/esd/vme8349/pci.c
 delete mode 100644 board/esd/vme8349/vme8349.c
 delete mode 100644 board/esd/vme8349/vme8349pin.h
 delete mode 100644 configs/caddy2_defconfig
 delete mode 100644 configs/vme8349_defconfig
 delete mode 100644 include/configs/caddy2.h
 delete mode 100644 include/configs/vme8349.h

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index e4c6f5d40b26..e751daac6e2d 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -8,14 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_VME8349
-	bool "Support vme8349"
-	select ARCH_MPC8349
-
-config TARGET_CADDY2
-	bool "Support caddy2"
-	select ARCH_MPC8349
-
 config TARGET_MPC8315ERDB
 	bool "Support MPC8315ERDB"
 	select ARCH_MPC8315
@@ -278,7 +270,6 @@ endmenu
 config FSL_ELBC
 	bool
 
-source "board/esd/vme8349/Kconfig"
 source "board/freescale/mpc8315erdb/Kconfig"
 source "board/freescale/mpc8323erdb/Kconfig"
 source "board/freescale/mpc832xemds/Kconfig"
diff --git a/board/esd/vme8349/Kconfig b/board/esd/vme8349/Kconfig
deleted file mode 100644
index ef2af40f7e80..000000000000
--- a/board/esd/vme8349/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if TARGET_VME8349
-
-config SYS_BOARD
-	default "vme8349"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "vme8349"
-
-endif
-
-if TARGET_CADDY2
-
-config SYS_BOARD
-	default "vme8349"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "caddy2"
-
-endif
diff --git a/board/esd/vme8349/MAINTAINERS b/board/esd/vme8349/MAINTAINERS
deleted file mode 100644
index a88ba13c303d..000000000000
--- a/board/esd/vme8349/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-VME8349 BOARD
-M:	Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-S:	Maintained
-F:	board/esd/vme8349/
-F:	include/configs/vme8349.h
-F:	configs/caddy2_defconfig
-F:	configs/vme8349_defconfig
diff --git a/board/esd/vme8349/Makefile b/board/esd/vme8349/Makefile
deleted file mode 100644
index 850c16ba638c..000000000000
--- a/board/esd/vme8349/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# Copyright (c) 2009 esd gmbh hannover germany.
-
-obj-y += vme8349.o caddy.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/board/esd/vme8349/caddy.c b/board/esd/vme8349/caddy.c
deleted file mode 100644
index ba91f4b3c843..000000000000
--- a/board/esd/vme8349/caddy.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * caddy.c -- esd VME8349 support for "missing" access modes in TSI148.
- * Copyright (c) 2009 esd gmbh.
- *
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <console.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/mpc8349_pci.h>
-#include <pci.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-
-#include "caddy.h"
-
-static struct caddy_interface *caddy_interface;
-
-void generate_answer(struct caddy_cmd *cmd, uint32_t status, uint32_t *result)
-{
-	struct caddy_answer *answer;
-	uint32_t ptr;
-
-	answer = &caddy_interface->answer[caddy_interface->answer_in];
-	memset((void *)answer, 0, sizeof(struct caddy_answer));
-	answer->answer = cmd->cmd;
-	answer->issue = cmd->issue;
-	answer->status = status;
-	memcpy(answer->par, result, 5 * sizeof(result[0]));
-	ptr = caddy_interface->answer_in + 1;
-	ptr = ptr & (ANSWER_SIZE - 1);
-	if (ptr != caddy_interface->answer_out)
-		caddy_interface->answer_in = ptr;
-}
-
-int do_caddy(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	unsigned long base_addr;
-	uint32_t ptr;
-	struct caddy_cmd *caddy_cmd;
-	uint32_t result[5];
-	uint16_t data16;
-	uint8_t data8;
-	uint32_t status;
-	pci_dev_t dev;
-	void *pci_ptr;
-
-	if (argc < 2) {
-		puts("Missing parameter\n");
-		return 1;
-	}
-
-	base_addr = simple_strtoul(argv[1], NULL, 16);
-	caddy_interface = (struct caddy_interface *) base_addr;
-
-	memset((void *)caddy_interface, 0, sizeof(struct caddy_interface));
-	memcpy((void *)&caddy_interface->magic[0], &CADDY_MAGIC, 16);
-
-	while (ctrlc() == 0) {
-		if (caddy_interface->cmd_in != caddy_interface->cmd_out) {
-			memset(result, 0, 5 * sizeof(result[0]));
-			status = 0;
-			caddy_cmd = &caddy_interface->cmd[caddy_interface->cmd_out];
-			pci_ptr = (void *)CONFIG_SYS_PCI1_IO_PHYS +
-				(caddy_cmd->addr & 0x001fffff);
-
-			switch (caddy_cmd->cmd) {
-			case CADDY_CMD_IO_READ_8:
-				result[0] = in_8(pci_ptr);
-				break;
-
-			case CADDY_CMD_IO_READ_16:
-				result[0] = in_be16(pci_ptr);
-				break;
-
-			case CADDY_CMD_IO_READ_32:
-				result[0] = in_be32(pci_ptr);
-				break;
-
-			case CADDY_CMD_IO_WRITE_8:
-				data8 = caddy_cmd->par[0] & 0x000000ff;
-				out_8(pci_ptr, data8);
-				break;
-
-			case CADDY_CMD_IO_WRITE_16:
-				data16 = caddy_cmd->par[0] & 0x0000ffff;
-				out_be16(pci_ptr, data16);
-				break;
-
-			case CADDY_CMD_IO_WRITE_32:
-				out_be32(pci_ptr, caddy_cmd->par[0]);
-				break;
-
-			case CADDY_CMD_CONFIG_READ_8:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				status = pci_read_config_byte(dev,
-							      caddy_cmd->addr,
-							      &data8);
-				result[0] = data8;
-				break;
-
-			case CADDY_CMD_CONFIG_READ_16:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				status = pci_read_config_word(dev,
-							      caddy_cmd->addr,
-							      &data16);
-				result[0] = data16;
-				break;
-
-			case CADDY_CMD_CONFIG_READ_32:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				status = pci_read_config_dword(dev,
-							       caddy_cmd->addr,
-							       &result[0]);
-				break;
-
-			case CADDY_CMD_CONFIG_WRITE_8:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				data8 = caddy_cmd->par[3] & 0x000000ff;
-				status = pci_write_config_byte(dev,
-							       caddy_cmd->addr,
-							       data8);
-				break;
-
-			case CADDY_CMD_CONFIG_WRITE_16:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				data16 = caddy_cmd->par[3] & 0x0000ffff;
-				status = pci_write_config_word(dev,
-							       caddy_cmd->addr,
-							       data16);
-				break;
-
-			case CADDY_CMD_CONFIG_WRITE_32:
-				dev = PCI_BDF(caddy_cmd->par[0],
-					      caddy_cmd->par[1],
-					      caddy_cmd->par[2]);
-				status = pci_write_config_dword(dev,
-								caddy_cmd->addr,
-								caddy_cmd->par[3]);
-				break;
-
-			default:
-				status = 0xffffffff;
-				break;
-			}
-
-			generate_answer(caddy_cmd, status, &result[0]);
-
-			ptr = caddy_interface->cmd_out + 1;
-			ptr = ptr & (CMD_SIZE - 1);
-			caddy_interface->cmd_out = ptr;
-		}
-
-		caddy_interface->heartbeat++;
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	caddy,	2,	0,	do_caddy,
-	"Start Caddy server.",
-	"Start Caddy server with Data structure a given addr\n"
-	);
diff --git a/board/esd/vme8349/caddy.h b/board/esd/vme8349/caddy.h
deleted file mode 100644
index 8e3033ba20ee..000000000000
--- a/board/esd/vme8349/caddy.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * caddy.c -- esd VME8349 support for "missing" access modes in TSI148.
- * Copyright (c) 2009 esd gmbh.
- *
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- */
-
-#ifndef __CADDY_H__
-#define __CADDY_H__
-
-#define CMD_SIZE	1024
-#define ANSWER_SIZE	1024
-#define CADDY_MAGIC	"esd vme8349 V1.0"
-
-enum caddy_cmds {
-	CADDY_CMD_IO_READ_8,
-	CADDY_CMD_IO_READ_16,
-	CADDY_CMD_IO_READ_32,
-	CADDY_CMD_IO_WRITE_8,
-	CADDY_CMD_IO_WRITE_16,
-	CADDY_CMD_IO_WRITE_32,
-	CADDY_CMD_CONFIG_READ_8,
-	CADDY_CMD_CONFIG_READ_16,
-	CADDY_CMD_CONFIG_READ_32,
-	CADDY_CMD_CONFIG_WRITE_8,
-	CADDY_CMD_CONFIG_WRITE_16,
-	CADDY_CMD_CONFIG_WRITE_32,
-};
-
-struct caddy_cmd {
-	uint32_t cmd;
-	uint32_t issue;
-	uint32_t addr;
-	uint32_t par[5];
-};
-
-struct caddy_answer {
-	uint32_t answer;
-	uint32_t issue;
-	uint32_t status;
-	uint32_t par[5];
-};
-
-struct caddy_interface {
-	uint8_t  magic[16];
-	uint32_t cmd_in;
-	uint32_t cmd_out;
-	uint32_t heartbeat;
-	uint32_t reserved1;
-	struct caddy_cmd cmd[CMD_SIZE];
-	uint32_t answer_in;
-	uint32_t answer_out;
-	uint32_t reserved2;
-	uint32_t reserved3;
-	struct caddy_answer answer[CMD_SIZE];
-};
-
-#endif /* of __CADDY_H__ */
diff --git a/board/esd/vme8349/pci.c b/board/esd/vme8349/pci.c
deleted file mode 100644
index bf51d39b67c8..000000000000
--- a/board/esd/vme8349/pci.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * pci.c -- esd VME8349 PCI board support.
- * Copyright (c) 2006 Wind River Systems, Inc.
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- * Copyright (c) 2009 esd gmbh.
- *
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- * Based on MPC8349 PCI support but w/o PIB related code.
- */
-
-#include <init.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-#include <linux/delay.h>
-#include "vme8349pin.h"
-
-static struct pci_region pci1_regions[] = {
-	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
-	},
-	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
-	},
-};
-
-/*
- * pci_init_board()
- *
- * NOTICE: PCI2 is not supported. There is only one
- * physical PCI slot on the board.
- *
- */
-void
-pci_init_board(void)
-{
-	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
-	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	struct pci_region *reg[] = { pci1_regions };
-	u8 reg8;
-	int monarch = 0;
-
-	i2c_set_bus_num(1);
-	/* Read the PCI_M66EN jumper setting */
-	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, 1) == 0) ||
-	    (i2c_read(0x38                     , 0, 0, &reg8, 1) == 0)) {
-		if (reg8 & 0x40) {
-			clk->occr = 0xff000000;	/* 66 MHz PCI */
-			printf("PCI:   66MHz\n");
-		} else {
-			clk->occr = 0xffff0003;	/* 33 MHz PCI */
-			printf("PCI:   33MHz\n");
-		}
-		if (((reg8 & 0x01) == 0) || ((reg8 & 0x02) == 0))
-			monarch = 1;
-	} else {
-		clk->occr = 0xffff0003;	/* 33 MHz PCI */
-		printf("PCI:   33MHz (I2C read failed)\n");
-	}
-	udelay(2000);
-
-	/*
-	 * Assert/deassert VME reset
-	 */
-	clrsetbits_be32(&immr->gpio[1].dat,
-			GPIO2_TSI_POWERUP_RESET_N | GPIO2_TSI_PLL_RESET_N,
-			GPIO2_VME_RESET_N  | GPIO2_L_RESET_EN_N);
-	setbits_be32(&immr->gpio[1].dir, GPIO2_TSI_PLL_RESET_N |
-		     GPIO2_TSI_POWERUP_RESET_N |
-		     GPIO2_VME_RESET_N |
-		     GPIO2_L_RESET_EN_N);
-	clrbits_be32(&immr->gpio[1].dir, GPIO2_V_SCON);
-	udelay(200);
-	setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_PLL_RESET_N);
-	udelay(200);
-	setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_POWERUP_RESET_N);
-	udelay(600000);
-	clrbits_be32(&immr->gpio[1].dat, GPIO2_L_RESET_EN_N);
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
-
-	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
-
-	udelay(2000);
-
-	if (monarch == 0) {
-		mpc83xx_pci_init(1, reg);
-	} else {
-		/*
-		 * Release PCI RST Output signal
-		 */
-		out_be32(&immr->pci_ctrl[0].gcr, 0);
-		udelay(2000);
-		out_be32(&immr->pci_ctrl[0].gcr, 1);
-	}
-}
diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c
deleted file mode 100644
index d388fc6d4901..000000000000
--- a/board/esd/vme8349/vme8349.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * vme8349.c -- esd VME8349 board support
- *
- * Copyright (c) 2008-2009 esd gmbh.
- *
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/mpc8349_pci.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <spd.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ddr_enable_ecc(unsigned int dram_size);
-
-int dram_init(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = 0;
-
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -ENXIO;
-
-	/* DDR SDRAM - Main memory */
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
-
-	msize = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(msize * 1024 * 1024);
-#endif
-
-	/* Now check memory size (after ECC is initialized) */
-	msize = get_ram_size(0, msize);
-
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	gd->ram_size = msize * 1024 * 1024;
-
-	return 0;
-}
-
-int checkboard(void)
-{
-#ifdef CONFIG_TARGET_CADDY2
-	puts("Board: esd VME-CADDY/2\n");
-#else
-	puts("Board: esd VME-CPU/8349\n");
-#endif
-
-	return 0;
-}
-
-#ifdef CONFIG_TARGET_CADDY2
-int board_eth_init(struct bd_info *bis)
-{
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-
-	return 0;
-}
-#endif
-
-int misc_init_r()
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
-	clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);
-
-	return 0;
-}
-
-/*
- * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
- * and VME-CADDY/2) have different SDRAM configurations.
- */
-#ifdef CONFIG_TARGET_CADDY2
-#define SMALL_RAM	0xff
-#define LARGE_RAM	0x00
-#else
-#define SMALL_RAM	0x00
-#define LARGE_RAM	0xff
-#endif
-
-#define SPD_VAL(a, b)	(((a) & SMALL_RAM) | ((b) & LARGE_RAM))
-
-static spd_eeprom_t default_spd_eeprom = {
-	SPD_VAL(0x80, 0x80),	/* 00 use 128 Bytes */
-	SPD_VAL(0x07, 0x07),	/* 01 use 128 Bytes */
-	SPD_MEMTYPE_DDR2,	/* 02 type is DDR2 */
-	SPD_VAL(0x0d, 0x0d),	/* 03 rows: 13 */
-	SPD_VAL(0x09, 0x0a),	/* 04 cols:  9 / 10 */
-	SPD_VAL(0x00, 0x00),	/* 05 */
-	SPD_VAL(0x40, 0x40),	/* 06 */
-	SPD_VAL(0x00, 0x00),	/* 07 */
-	SPD_VAL(0x05, 0x05),	/* 08 */
-	SPD_VAL(0x30, 0x30),	/* 09 */
-	SPD_VAL(0x45, 0x45),	/* 10 */
-	SPD_VAL(0x02, 0x02),	/* 11 ecc used */
-	SPD_VAL(0x82, 0x82),	/* 12 */
-	SPD_VAL(0x10, 0x10),	/* 13 */
-	SPD_VAL(0x08, 0x08),	/* 14 */
-	SPD_VAL(0x00, 0x00),	/* 15 */
-	SPD_VAL(0x0c, 0x0c),	/* 16 */
-	SPD_VAL(0x04, 0x08),	/* 17 banks: 4 / 8 */
-	SPD_VAL(0x38, 0x38),	/* 18 */
-	SPD_VAL(0x00, 0x00),	/* 19 */
-	SPD_VAL(0x02, 0x02),	/* 20 */
-	SPD_VAL(0x00, 0x00),	/* 21 */
-	SPD_VAL(0x03, 0x03),	/* 22 */
-	SPD_VAL(0x3d, 0x3d),	/* 23 */
-	SPD_VAL(0x45, 0x45),	/* 24 */
-	SPD_VAL(0x50, 0x50),	/* 25 */
-	SPD_VAL(0x45, 0x45),	/* 26 */
-	SPD_VAL(0x3c, 0x3c),	/* 27 */
-	SPD_VAL(0x28, 0x28),	/* 28 */
-	SPD_VAL(0x3c, 0x3c),	/* 29 */
-	SPD_VAL(0x2d, 0x2d),	/* 30 */
-	SPD_VAL(0x20, 0x80),	/* 31 */
-	SPD_VAL(0x20, 0x20),	/* 32 */
-	SPD_VAL(0x27, 0x27),	/* 33 */
-	SPD_VAL(0x10, 0x10),	/* 34 */
-	SPD_VAL(0x17, 0x17),	/* 35 */
-	SPD_VAL(0x3c, 0x3c),	/* 36 */
-	SPD_VAL(0x1e, 0x1e),	/* 37 */
-	SPD_VAL(0x1e, 0x1e),	/* 38 */
-	SPD_VAL(0x00, 0x00),	/* 39 */
-	SPD_VAL(0x00, 0x06),	/* 40 */
-	SPD_VAL(0x37, 0x37),	/* 41 */
-	SPD_VAL(0x4b, 0x7f),	/* 42 */
-	SPD_VAL(0x80, 0x80),	/* 43 */
-	SPD_VAL(0x18, 0x18),	/* 44 */
-	SPD_VAL(0x22, 0x22),	/* 45 */
-	SPD_VAL(0x00, 0x00),	/* 46 */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-	SPD_VAL(0x10, 0x10),	/* 62 */
-	SPD_VAL(0x7e, 0x1d),	/* 63 */
-	{ 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
-	SPD_VAL(0x00, 0x00),	/* 72 */
-#ifdef CONFIG_TARGET_CADDY2
-	{ "vme-caddy/2 ram   " }
-#else
-	{ "vme-cpu/2 ram     " }
-#endif
-};
-
-int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	int old_bus = i2c_get_bus_num();
-	unsigned int l, sum;
-	int valid = 0;
-
-	i2c_set_bus_num(0);
-
-	if (i2c_read(chip, addr, alen, buffer, len) == 0)
-		if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
-			sum = 0;
-			for (l = 0; l < 63; l++)
-				sum = (sum + buffer[l]) & 0xff;
-			if (sum == buffer[63])
-				valid = 1;
-			else
-				printf("Invalid checksum in EEPROM %02x %02x\n",
-				       sum, buffer[63]);
-		}
-
-	if (valid == 0) {
-		memcpy(buffer, (void *)&default_spd_eeprom, len);
-		sum = 0;
-		for (l = 0; l < 63; l++)
-			sum = (sum + buffer[l]) & 0xff;
-		if (sum != buffer[63])
-			printf("Invalid checksum in FLASH %02x %02x\n",
-			       sum, buffer[63]);
-		buffer[63] = sum;
-	}
-
-	i2c_set_bus_num(old_bus);
-
-	return 0;
-}
diff --git a/board/esd/vme8349/vme8349pin.h b/board/esd/vme8349/vme8349pin.h
deleted file mode 100644
index 9ae9c7becae7..000000000000
--- a/board/esd/vme8349/vme8349pin.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * vme8349pin.h -- esd VME8349 MPC8349 I/O pin definition.
- * Copyright (c) 2009 esd gmbh.
- *
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- */
-
-#ifndef __VME8349PIN_H__
-#define __VME8349PIN_H__
-
-#define GPIO2_V_SCON		0x80000000 /* In:  from tsi148 1: is syscon */
-#define GPIO2_VME_RESET_N	0x20000000 /* Out: to tsi148                */
-#define GPIO2_TSI_PLL_RESET_N	0x08000000 /* Out: to tsi148                */
-#define GPIO2_TSI_POWERUP_RESET_N 0x00800000 /* Out: to tsi148              */
-#define GPIO2_L_RESET_EN_N	0x00100000 /* Out: 0:vme can assert cpu lrst*/
-
-#endif /* of ifndef __VME8349PIN_H__ */
diff --git a/configs/caddy2_defconfig b/configs/caddy2_defconfig
deleted file mode 100644
index cf24b3348647..000000000000
--- a/configs/caddy2_defconfig
+++ /dev/null
@@ -1,123 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_CADDY2=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR_PCIIO"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="UNKNOWN"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFFC00000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_4_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xF0000000
-CONFIG_LBLAW1_NAME="WINDOW1"
-CONFIG_LBLAW1_LENGTH_256_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFFC00000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_4_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="WINDOW1"
-CONFIG_BR1_OR1_BASE=0xF0000000
-CONFIG_BR1_PORTSIZE_32BIT=y
-CONFIG_OR1_AM_256_KBYTES=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_TSI148=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFFFC0000
-CONFIG_ENV_ADDR_REDUND=0xFFFE0000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_E1000=y
-CONFIG_RTC_RX8025=y
-CONFIG_BAUDRATE=9600
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/vme8349_defconfig b/configs/vme8349_defconfig
deleted file mode 100644
index 286b5837d3c6..000000000000
--- a/configs/vme8349_defconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_VME8349=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR_PCIIO"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="UNKNOWN"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xF8000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_128_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xF0000000
-CONFIG_LBLAW1_NAME="WINDOW1"
-CONFIG_LBLAW1_LENGTH_256_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xF8000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_128_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="WINDOW1"
-CONFIG_BR1_OR1_BASE=0xF0000000
-CONFIG_BR1_PORTSIZE_32BIT=y
-CONFIG_OR1_AM_256_KBYTES=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_64BIT=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_TSI148=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFFFC0000
-CONFIG_ENV_ADDR_REDUND=0xFFFE0000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_RTC_RX8025=y
-CONFIG_BAUDRATE=9600
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 05663c72b4b8..b128a05dd380 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -348,8 +348,7 @@ int dm_pciauto_config_device(struct udevice *dev)
 		      PCI_DEV(dm_pci_get_bdf(dev)));
 		break;
 #endif
-#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \
-		!defined(CONFIG_TARGET_CADDY2)
+#if defined(CONFIG_ARCH_MPC834X)
 	case PCI_CLASS_BRIDGE_OTHER:
 		/*
 		 * The host/PCI bridge 1 seems broken in 8349 - it presents
diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h
deleted file mode 100644
index 78891fefd2df..000000000000
--- a/include/configs/caddy2.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * esd vme8349 U-Boot configuration file
- * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
- *
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * reinhard.arlt at esd-electronics.de
- * Based on the MPC8349EMDS config.
- */
-
-/*
- * vme8349 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1	/* E300 Family */
-
-/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
-#undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
-
-#undef CONFIG_SYS_DRAM_TEST			/* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
-#define CONFIG_SPD_EEPROM
-#define SPD_EEPROM_ADDRESS		0x54
-#define CONFIG_SYS_READ_SPD		vme8349_read_spd
-#define CONFIG_SYS_83XX_DDR_USES_CS0	/* esd; Fsl board uses CS2/CS3 */
-
-/*
- * 32-bit data path mode.
- *
- * Please note that using this mode for devices with the real density of 64-bit
- * effectively reduces the amount of available memory due to the effect of
- * wrapping around while translating address to row/columns, for example in the
- * 256MB module the upper 128MB get aliased with contents of the lower
- * 128MB); normally this define should be used for devices with real 32-bit
- * data path.
- */
-#undef CONFIG_DDR_32BIT
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* DDR is sys memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
-#define CONFIG_DDR_2T_TIMING
-#define CONFIG_SYS_DDRCDR		(DDRCDR_DHC_EN \
-					| DDRCDR_ODT \
-					| DDRCDR_Q_DRN)
-					/* 0x80080001 */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE		0xffc00000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		4		/* flash size in MB */
-
-
-#define CONFIG_SYS_WINDOW1_BASE		0xf0000000
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device*/
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase TO (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write TO (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xF7000000	/* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE		0x1000		/* size */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB */
-#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Malloc size */
-
-#undef CONFIG_SYS_LB_SDRAM	/* if board has SDRAM on local bus */
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
-
-#define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS		0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE		0x00100000	/* 1M */
-
-#if defined(CONFIG_PCI)
-
-
-#if !defined(CONFIG_PCI_PNP)
-	#define PCI_ENET0_IOADDR	0xFIXME
-	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0xFIXME
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
-
-#endif	/* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII			/* MII PHY management */
-#define CONFIG_TSEC1
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_TSEC2
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define CONFIG_PHY_M88E1111
-#define TSEC1_PHY_ADDR		0x08
-#define TSEC2_PHY_ADDR		0x10
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector	*/
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_SYS_RTC_BUS_NUM  0x01
-#define CONFIG_SYS_I2C_RTC_ADDR	0x32
-
-/* Pass Ethernet MAC to VxWorks */
-#define CONFIG_SYS_VXWORKS_MAC_PTR	0x000043f0
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Init Memory map for Linux*/
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR	0x00100000
-#define CONFIG_SYS_GPIO1_DAT	0x00100000
-
-#define CONFIG_SYS_GPIO2_PRELIM
-#define CONFIG_SYS_GPIO2_DIR	0x78900000
-#define CONFIG_SYS_GPIO2_DAT	0x70100000
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_HOSTNAME		"VME8349"
-#define CONFIG_ROOTPATH		"/tftpboot/rootfs"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_LOADADDR		800000	/* def location for tftp and bootm */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=vme8349\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
-		"bootm\0"						\
-	"load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0"		\
-	"update=protect off fff00000 fff3ffff; "			\
-		"era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
-	"upd=run load update\0"						\
-	"fdtaddr=780000\0"						\
-	"fdtfile=vme8349.dtb\0"						\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#ifndef __ASSEMBLY__
-int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
-		     unsigned char *buffer, int len);
-#endif
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
deleted file mode 100644
index 20fcce187055..000000000000
--- a/include/configs/vme8349.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * esd vme8349 U-Boot configuration file
- * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
- *
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * reinhard.arlt@esd-electronics.de
- * Based on the MPC8349EMDS config.
- */
-
-/*
- * vme8349 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1	/* E300 Family */
-
-/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
-#undef CONFIG_MPC83XX_PCI2		/* support for 2nd PCI controller */
-
-#undef CONFIG_SYS_DRAM_TEST			/* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
-#define CONFIG_SPD_EEPROM
-#define SPD_EEPROM_ADDRESS		0x54
-#define CONFIG_SYS_READ_SPD		vme8349_read_spd
-#define CONFIG_SYS_83XX_DDR_USES_CS0	/* esd; Fsl board uses CS2/CS3 */
-
-/*
- * 32-bit data path mode.
- *
- * Please note that using this mode for devices with the real density of 64-bit
- * effectively reduces the amount of available memory due to the effect of
- * wrapping around while translating address to row/columns, for example in the
- * 256MB module the upper 128MB get aliased with contents of the lower
- * 128MB); normally this define should be used for devices with real 32-bit
- * data path.
- */
-#undef CONFIG_DDR_32BIT
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* DDR is sys memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_SS_EN \
-					| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
-#define CONFIG_DDR_2T_TIMING
-#define CONFIG_SYS_DDRCDR		(DDRCDR_DHC_EN \
-					| DDRCDR_ODT \
-					| DDRCDR_Q_DRN)
-					/* 0x80080001 */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE		0xf8000000	/* start of FLASH   */
-#define CONFIG_SYS_FLASH_SIZE		128		/* flash size in MB */
-
-
-#define CONFIG_SYS_WINDOW1_BASE		0xf0000000
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device*/
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase TO (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write TO (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xF7000000	/* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE		0x1000		/* size */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB */
-#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)	/* Malloc size */
-
-#undef CONFIG_SYS_LB_SDRAM	/* if board has SDRAM on local bus */
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
-
-#define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE	0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS	CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE		0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS		0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE		0x00100000	/* 1M */
-
-#if defined(CONFIG_PCI)
-
-
-#if !defined(CONFIG_PCI_PNP)
-	#define PCI_ENET0_IOADDR	0xFIXME
-	#define PCI_ENET0_MEMADDR	0xFIXME
-	#define PCI_IDSEL_NUMBER	0xFIXME
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
-
-#endif	/* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII			/* MII PHY management */
-#define CONFIG_TSEC1
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_TSEC2
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define CONFIG_PHY_M88E1111
-#define TSEC1_PHY_ADDR		0x08
-#define TSEC2_PHY_ADDR		0x10
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector	*/
-#endif
-
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#define CONFIG_SYS_RTC_BUS_NUM  0x01
-#define CONFIG_SYS_I2C_RTC_ADDR	0x32
-
-/* Pass Ethernet MAC to VxWorks */
-#define CONFIG_SYS_VXWORKS_MAC_PTR	0x000043f0
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Init Memory map for Linux*/
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR	0x00100000
-#define CONFIG_SYS_GPIO1_DAT	0x00100000
-
-#define CONFIG_SYS_GPIO2_PRELIM
-#define CONFIG_SYS_GPIO2_DIR	0x78900000
-#define CONFIG_SYS_GPIO2_DAT	0x70100000
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_HOSTNAME		"VME8349"
-#define CONFIG_ROOTPATH		"/tftpboot/rootfs"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_LOADADDR		800000	/* def location for tftp and bootm */
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=vme8349\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
-		"bootm\0"						\
-	"load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0"		\
-	"update=protect off fff00000 fff3ffff; "			\
-		"era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
-	"upd=run load update\0"						\
-	"fdtaddr=780000\0"						\
-	"fdtfile=vme8349.dtb\0"						\
-	""
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"	\
-							"$netdev:off "	\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#ifndef __ASSEMBLY__
-int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
-		     unsigned char *buffer, int len);
-#endif
-
-#endif	/* __CONFIG_H */
-- 
2.17.1