From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 05/27] m68k: Remove M5475x boards
Date: Fri, 14 May 2021 21:34:10 -0400 [thread overview]
Message-ID: <20210515013432.12867-5-trini@konsulko.com> (raw)
In-Reply-To: <20210515013432.12867-1-trini@konsulko.com>
These board has not been converted to CONFIG_DM_PCI by the deadline.
Remove them. As this is the last of the mcf547x_8x family of boards,
remove that support as well.
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
arch/m68k/Kconfig | 15 -
arch/m68k/Makefile | 2 -
arch/m68k/cpu/mcf547x_8x/Makefile | 9 -
arch/m68k/cpu/mcf547x_8x/cpu.c | 153 ---------
arch/m68k/cpu/mcf547x_8x/cpu_init.c | 150 ---------
arch/m68k/cpu/mcf547x_8x/interrupts.c | 35 ---
arch/m68k/cpu/mcf547x_8x/pci.c | 154 ---------
arch/m68k/cpu/mcf547x_8x/slicetimer.c | 95 ------
arch/m68k/cpu/mcf547x_8x/speed.c | 33 --
arch/m68k/cpu/mcf547x_8x/start.S | 264 ----------------
arch/m68k/dts/M5475AFE.dts | 21 --
arch/m68k/dts/M5475BFE.dts | 21 --
arch/m68k/dts/M5475CFE.dts | 21 --
arch/m68k/dts/M5475DFE.dts | 21 --
arch/m68k/dts/M5475EFE.dts | 21 --
arch/m68k/dts/M5475FFE.dts | 21 --
arch/m68k/dts/M5475GFE.dts | 21 --
arch/m68k/dts/Makefile | 7 -
arch/m68k/include/asm/cache.h | 2 +-
arch/m68k/include/asm/coldfire/dspi.h | 6 -
arch/m68k/include/asm/coldfire/eport.h | 13 -
arch/m68k/include/asm/fec.h | 5 -
arch/m68k/include/asm/immap_547x_8x.h | 258 ---------------
arch/m68k/include/asm/m547x_8x.h | 417 -------------------------
arch/m68k/lib/cache.c | 2 +-
board/freescale/m547xevb/Kconfig | 15 -
board/freescale/m547xevb/MAINTAINERS | 12 -
board/freescale/m547xevb/Makefile | 6 -
board/freescale/m547xevb/README | 271 ----------------
board/freescale/m547xevb/m547xevb.c | 108 -------
configs/M5475AFE_defconfig | 32 --
configs/M5475BFE_defconfig | 32 --
configs/M5475CFE_defconfig | 32 --
configs/M5475DFE_defconfig | 32 --
configs/M5475EFE_defconfig | 32 --
configs/M5475FFE_defconfig | 32 --
configs/M5475GFE_defconfig | 32 --
doc/arch/m68k.rst | 2 +-
drivers/net/mcfmii.c | 4 -
env/Kconfig | 2 +-
include/configs/M5475EVB.h | 241 --------------
include/fsl_dspi.h | 6 -
42 files changed, 4 insertions(+), 2654 deletions(-)
delete mode 100644 arch/m68k/cpu/mcf547x_8x/Makefile
delete mode 100644 arch/m68k/cpu/mcf547x_8x/cpu.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/cpu_init.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/interrupts.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/pci.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/slicetimer.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/speed.c
delete mode 100644 arch/m68k/cpu/mcf547x_8x/start.S
delete mode 100644 arch/m68k/dts/M5475AFE.dts
delete mode 100644 arch/m68k/dts/M5475BFE.dts
delete mode 100644 arch/m68k/dts/M5475CFE.dts
delete mode 100644 arch/m68k/dts/M5475DFE.dts
delete mode 100644 arch/m68k/dts/M5475EFE.dts
delete mode 100644 arch/m68k/dts/M5475FFE.dts
delete mode 100644 arch/m68k/dts/M5475GFE.dts
delete mode 100644 arch/m68k/include/asm/immap_547x_8x.h
delete mode 100644 arch/m68k/include/asm/m547x_8x.h
delete mode 100644 board/freescale/m547xevb/Kconfig
delete mode 100644 board/freescale/m547xevb/MAINTAINERS
delete mode 100644 board/freescale/m547xevb/Makefile
delete mode 100644 board/freescale/m547xevb/README
delete mode 100644 board/freescale/m547xevb/m547xevb.c
delete mode 100644 configs/M5475AFE_defconfig
delete mode 100644 configs/M5475BFE_defconfig
delete mode 100644 configs/M5475CFE_defconfig
delete mode 100644 configs/M5475DFE_defconfig
delete mode 100644 configs/M5475EFE_defconfig
delete mode 100644 configs/M5475FFE_defconfig
delete mode 100644 configs/M5475GFE_defconfig
delete mode 100644 include/configs/M5475EVB.h
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index f7f6d08be3f5..cf45d789d63d 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -65,12 +65,6 @@ config MCF5227x
select DM_SERIAL
bool
-config MCF547x_8x
- select OF_CONTROL
- select DM
- select DM_SERIAL
- bool
-
# processor type
config M5208
bool
@@ -137,10 +131,6 @@ config M52277
bool
select MCF5227x
-config M547x
- bool
- select MCF547x_8x
-
choice
prompt "Target select"
optional
@@ -213,10 +203,6 @@ config TARGET_M54455EVB
bool "Support M54455EVB"
select M54455
-config TARGET_M5475EVB
- bool "Support M5475EVB"
- select M547x
-
config TARGET_AMCORE
bool "Support AMCORE"
select M5307
@@ -244,7 +230,6 @@ source "board/freescale/m5373evb/Kconfig"
source "board/freescale/m54418twr/Kconfig"
source "board/freescale/m54451evb/Kconfig"
source "board/freescale/m54455evb/Kconfig"
-source "board/freescale/m547xevb/Kconfig"
source "board/sysam/amcore/Kconfig"
source "board/sysam/stmark2/Kconfig"
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 7f23ff45887a..86b36e1a40e7 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -19,14 +19,12 @@ cpuflags-$(CONFIG_MCF5301x) := -mcpu=53015 -fPIC
cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC
cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC
cpuflags-$(CONFIG_MCF5445x) := -mcpu=54455 -fPIC
-cpuflags-$(CONFIG_MCF547x_8x) := -mcpu=5485 -fPIC
PLATFORM_CPPFLAGS += $(cpuflags-y)
ldflags-$(CONFIG_MCF5441x) := --got=single
ldflags-$(CONFIG_MCF5445x) := --got=single
-ldflags-$(CONFIG_MCF547x_8x) := --got=single
ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
ifneq (,$(findstring GOT,$(shell $(LD) --help)))
diff --git a/arch/m68k/cpu/mcf547x_8x/Makefile b/arch/m68k/cpu/mcf547x_8x/Makefile
deleted file mode 100644
index 0db3386aa850..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-# ccflags-y += -DET_DEBUG
-
-extra-y = start.o
-obj-y = cpu.o speed.o cpu_init.o pci.o interrupts.o slicetimer.o
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu.c b/arch/m68k/cpu/mcf547x_8x/cpu.c
deleted file mode 100644
index c1361e705799..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/cpu.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <vsprintf.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_be16(&gptmr->pre, 10);
- out_be16(&gptmr->cnt, 1);
-
- /* enable watchdog, set timeout to 0 and wait */
- out_8(&gptmr->mode, GPT_TMS_SGPIO);
- out_8(&gptmr->ctrl, GPT_CTRL_WDEN | GPT_CTRL_CE);
-
- /* we don't return! */
- return 1;
-};
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
- siu_t *siu = (siu_t *) MMAP_SIU;
- u16 id = 0;
-
- puts("CPU: ");
-
- switch ((in_be32(&siu->jtagid) & 0x000FF000) >> 12) {
- case 0x0C:
- id = 5485;
- break;
- case 0x0D:
- id = 5484;
- break;
- case 0x0E:
- id = 5483;
- break;
- case 0x0F:
- id = 5482;
- break;
- case 0x10:
- id = 5481;
- break;
- case 0x11:
- id = 5480;
- break;
- case 0x12:
- id = 5475;
- break;
- case 0x13:
- id = 5474;
- break;
- case 0x14:
- id = 5473;
- break;
- case 0x15:
- id = 5472;
- break;
- case 0x16:
- id = 5471;
- break;
- case 0x17:
- id = 5470;
- break;
- }
-
- if (id) {
- char buf1[32], buf2[32];
-
- printf("Freescale MCF%d\n", id);
- printf(" CPU CLK %s MHz BUS CLK %s MHz\n",
- strmhz(buf1, gd->cpu_clk),
- strmhz(buf2, gd->bus_clk));
- }
-
- return 0;
-};
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-#if defined(CONFIG_HW_WATCHDOG)
-/* Called by macro WATCHDOG_RESET */
-void hw_watchdog_reset(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_8(&gptmr->ocpw, 0xa5);
-}
-
-int watchdog_disable(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- /* UserManual, once the wdog is disabled, wdog cannot be re-enabled */
- out_8(&gptmr->mode, 0);
- out_8(&gptmr->ctrl, 0);
-
- puts("WATCHDOG:disabled\n");
-
- return (0);
-}
-
-int watchdog_init(void)
-{
- gptmr_t *gptmr = (gptmr_t *) (MMAP_GPTMR);
-
- out_be16(&gptmr->pre, CONFIG_WATCHDOG_TIMEOUT);
- out_be16(&gptmr->cnt, CONFIG_SYS_TIMER_PRESCALER * 1000);
-
- out_8(&gptmr->mode, GPT_TMS_SGPIO);
- out_8(&gptmr->ctrl, GPT_CTRL_CE | GPT_CTRL_WDEN);
- puts("WATCHDOG:enabled\n");
-
- return (0);
-}
-#endif /* CONFIG_HW_WATCHDOG */
-
-#if defined(CONFIG_FSLDMAFEC) || defined(CONFIG_MCFFEC)
-/* Default initializations for MCFFEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(struct bd_info *bis)
- */
-
-int cpu_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_FSLDMAFEC)
- mcdmafec_initialize(bis);
-#endif
-#if defined(CONFIG_MCFFEC)
- mcffec_initialize(bis);
-#endif
- return 0;
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/cpu_init.c b/arch/m68k/cpu/mcf547x_8x/cpu_init.c
deleted file mode 100644
index 8e42b6314123..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/cpu_init.c
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <MCD_dma.h>
-#include <cpu_func.h>
-#include <init.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_CMD_NET)
-#include <config.h>
-#include <net.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f(void)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
- xlbarb_t *xlbarb = (xlbarb_t *) MMAP_XARB;
-
- out_be32(&xlbarb->adrto, 0x2000);
- out_be32(&xlbarb->datto, 0x2500);
- out_be32(&xlbarb->busto, 0x3000);
-
- out_be32(&xlbarb->cfg, XARB_CFG_AT | XARB_CFG_DT);
-
- /* Master Priority Enable */
- out_be32(&xlbarb->prien, 0xff);
- out_be32(&xlbarb->pri, 0);
-
-#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
- out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
- out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
- out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
- out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE);
- out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL);
- out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
- out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE);
- out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL);
- out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
- out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE);
- out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL);
- out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
- out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE);
- out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL);
- out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK);
-#endif
-
-#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
- out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE);
- out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
- out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
-#endif
-
-#ifdef CONFIG_SYS_I2C_FSL
- out_be16(&gpio->par_feci2cirq,
- GPIO_PAR_FECI2CIRQ_SCL | GPIO_PAR_FECI2CIRQ_SDA);
-#endif
-
- icache_enable();
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r(void)
-{
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_FSLDMAFEC)
- MCD_initDma((dmaRegs *) (MMAP_MCDMA), (void *)(MMAP_SRAM + 512),
- MCD_RELOC_TASKS);
-#endif
- return (0);
-}
-
-void uart_port_conf(int port)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- u8 *pscsicr = (u8 *) (CONFIG_SYS_UART_BASE + 0x40);
-
- /* Setup Ports: */
- switch (port) {
- case 0:
- out_8(&gpio->par_psc0, GPIO_PAR_PSC0_TXD0 | GPIO_PAR_PSC0_RXD0);
- break;
- case 1:
- out_8(&gpio->par_psc1, GPIO_PAR_PSC1_TXD1 | GPIO_PAR_PSC1_RXD1);
- break;
- case 2:
- out_8(&gpio->par_psc2, GPIO_PAR_PSC2_TXD2 | GPIO_PAR_PSC2_RXD2);
- break;
- case 3:
- out_8(&gpio->par_psc3, GPIO_PAR_PSC3_TXD3 | GPIO_PAR_PSC3_RXD3);
- break;
- }
-
- clrbits_8(pscsicr, 0x07);
-}
-
-#if defined(CONFIG_CMD_NET)
-int fecpin_setclear(fec_info_t *info, int setclear)
-{
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- u32 fec0_base;
-
- if (fec_get_base_addr(0, &fec0_base))
- return -1;
-
- if (setclear) {
- if (info->iobase == fec0_base)
- setbits_be16(&gpio->par_feci2cirq, 0xf000);
- else
- setbits_be16(&gpio->par_feci2cirq, 0x0fc0);
- } else {
- if (info->iobase == fec0_base)
- clrbits_be16(&gpio->par_feci2cirq, 0xf000);
- else
- clrbits_be16(&gpio->par_feci2cirq, 0x0fc0);
- }
- return 0;
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/interrupts.c b/arch/m68k/cpu/mcf547x_8x/interrupts.c
deleted file mode 100644
index 703090ddc258..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/interrupts.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/* CPU specific interrupt routine */
-#include <common.h>
-#include <irq_func.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-int interrupt_init(void)
-{
- int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
-
- /* Make sure all interrupts are disabled */
- setbits_be32(&intp->imrh0, 0xffffffff);
- setbits_be32(&intp->imrl0, 0xffffffff);
-
- enable_interrupts();
-
- return 0;
-}
-
-#if defined(CONFIG_SLTTMR)
-void dtimer_intr_setup(void)
-{
- int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE);
-
- out_8(&intp->icr0[CONFIG_SYS_TMRINTR_NO], CONFIG_SYS_TMRINTR_PRI);
- clrbits_be32(&intp->imrh0, CONFIG_SYS_TMRINTR_MASK);
-}
-#endif
diff --git a/arch/m68k/cpu/mcf547x_8x/pci.c b/arch/m68k/cpu/mcf547x_8x/pci.c
deleted file mode 100644
index 74ba68124f1a..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/pci.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/*
- * PCI Configuration space access support
- */
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/immap.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_PCI)
-/* System RAM mapped over PCI */
-#define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op) *val = op((type)(addr));
-#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask) \
-int pci_##rw##_cfg_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- u32 addr = 0; \
- u16 cfg_type = 0; \
- addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
- out_be32(hose->cfg_addr, addr); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- __asm__ __volatile__("nop"); \
- __asm__ __volatile__("nop"); \
- out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- return 0; \
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 * val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- __asm__ __volatile__("nop");
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- __asm__ __volatile__("nop");
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
-void pci_mcf547x_8x_init(struct pci_controller *hose)
-{
- pci_t *pci = (pci_t *) MMAP_PCI;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
- /* Port configuration */
- out_be16(&gpio->par_pcibg,
- GPIO_PAR_PCIBG_PCIBG0(3) | GPIO_PAR_PCIBG_PCIBG1(3) |
- GPIO_PAR_PCIBG_PCIBG2(3) | GPIO_PAR_PCIBG_PCIBG3(3) |
- GPIO_PAR_PCIBG_PCIBG4(3));
- out_be16(&gpio->par_pcibr,
- GPIO_PAR_PCIBR_PCIBR0(3) | GPIO_PAR_PCIBR_PCIBR1(3) |
- GPIO_PAR_PCIBR_PCIBR2(3) | GPIO_PAR_PCIBR_PCIBR3(3) |
- GPIO_PAR_PCIBR_PCIBR4(3));
-
- /* Assert reset bit */
- setbits_be32(&pci->gscr, PCI_GSCR_PR);
-
- out_be32(&pci->tcr1, PCI_TCR1_P);
-
- /* Initiator windows */
- out_be32(&pci->iw0btar,
- CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16));
- out_be32(&pci->iw1btar,
- CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16));
- out_be32(&pci->iw2btar,
- CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16));
-
- out_be32(&pci->iwcr,
- PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |
- PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO);
-
- out_be32(&pci->icr, 0);
-
- /* Enable bus master and mem access */
- out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M);
-
- /* Cache line size and master latency */
- out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xf8));
- out_be32(&pci->cr2, 0);
-
-#ifdef CONFIG_SYS_PCI_BAR0
- out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0));
- out_be32(&pci->tbatr0a, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN);
-#endif
-#ifdef CONFIG_SYS_PCI_BAR1
- out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1));
- out_be32(&pci->tbatr1a, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN);
-#endif
-
- /* Deassert reset bit */
- clrbits_be32(&pci->gscr, PCI_GSCR_PR);
- udelay(1000);
-
- /* Enable PCI bus master support */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
-
- pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS,
- CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 3;
-
- hose->cfg_addr = &(pci->car);
- hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS;
-
- pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,
- pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,
- pci_write_cfg_dword);
-
- /* Hose scan */
- pci_register_hose(hose);
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/m68k/cpu/mcf547x_8x/slicetimer.c b/arch/m68k/cpu/mcf547x_8x/slicetimer.c
deleted file mode 100644
index dc076fc6e814..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/slicetimer.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <init.h>
-#include <irq_func.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/timer.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static ulong timestamp;
-
-#if defined(CONFIG_SLTTMR)
-#ifndef CONFIG_SYS_UDELAY_BASE
-# error "uDelay base not defined!"
-#endif
-
-#if !defined(CONFIG_SYS_TMR_BASE) || !defined(CONFIG_SYS_INTR_BASE) || !defined(CONFIG_SYS_TMRINTR_NO) || !defined(CONFIG_SYS_TMRINTR_MASK)
-# error "TMR_BASE, INTR_BASE, TMRINTR_NO or TMRINTR_MASk not defined!"
-#endif
-extern void dtimer_intr_setup(void);
-
-void __udelay(unsigned long usec)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_UDELAY_BASE);
- u32 now, freq;
-
- /* 1 us period */
- freq = CONFIG_SYS_TIMER_PRESCALER;
-
- /* Disable */
- out_be32(&timerp->cr, 0);
- out_be32(&timerp->tcnt, usec * freq);
- out_be32(&timerp->cr, SLT_CR_TEN);
-
- now = in_be32(&timerp->cnt);
- while (now != 0)
- now = in_be32(&timerp->cnt);
-
- setbits_be32(&timerp->sr, SLT_SR_ST);
- out_be32(&timerp->cr, 0);
-}
-
-void dtimer_interrupt(void *not_used)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
-
- /* check for timer interrupt asserted */
- if ((CONFIG_SYS_TMRPND_REG & CONFIG_SYS_TMRINTR_MASK) == CONFIG_SYS_TMRINTR_PEND) {
- setbits_be32(&timerp->sr, SLT_SR_ST);
- timestamp++;
- return;
- }
-}
-
-int timer_init(void)
-{
- slt_t *timerp = (slt_t *) (CONFIG_SYS_TMR_BASE);
-
- timestamp = 0;
-
- /* disable timer */
- out_be32(&timerp->cr, 0);
- out_be32(&timerp->tcnt, 0);
- /* clear status */
- out_be32(&timerp->sr, SLT_SR_BE | SLT_SR_ST);
-
- /* initialize and enable timer interrupt */
- irq_install_handler(CONFIG_SYS_TMRINTR_NO, dtimer_interrupt, 0);
-
- /* Interrupt every ms */
- out_be32(&timerp->tcnt, 1000 * CONFIG_SYS_TIMER_PRESCALER);
-
- dtimer_intr_setup();
-
- /* set a period of 1us, set timer mode to restart and
- enable timer and interrupt */
- out_be32(&timerp->cr, SLT_CR_RUN | SLT_CR_IEN | SLT_CR_TEN);
- return 0;
-}
-
-ulong get_timer(ulong base)
-{
- return (timestamp - base);
-}
-
-#endif /* CONFIG_SLTTMR */
diff --git a/arch/m68k/cpu/mcf547x_8x/speed.c b/arch/m68k/cpu/mcf547x_8x/speed.c
deleted file mode 100644
index bbcf601f38fb..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/speed.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <asm/global_data.h>
-#include <asm/processor.h>
-
-#include <asm/immap.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
-int get_clocks(void)
-{
- gd->bus_clk = CONFIG_SYS_CLK;
- gd->cpu_clk = (gd->bus_clk * 2);
-
-#ifdef CONFIG_SYS_I2C_FSL
- gd->arch.i2c1_clk = gd->bus_clk;
-#endif
-
- return (0);
-}
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
deleted file mode 100644
index b70842b2b83d..000000000000
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ /dev/null
@@ -1,264 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include "version.h"
-#include <asm/cache.h>
-
-#define _START _start
-#define _FAULT _fault
-
-#define SAVE_ALL \
- move.w #0x2700,%sr; /* disable intrs */ \
- subl #60,%sp; /* space for 15 regs */ \
- moveml %d0-%d7/%a0-%a6,%sp@;
-
-#define RESTORE_ALL \
- moveml %sp@,%d0-%d7/%a0-%a6; \
- addl #60,%sp; /* space for 15 regs */ \
- rte;
-
-.text
-
-/*
- * Vector table. This is used for initial platform startup.
- * These vectors are to catch any un-intended traps.
- */
-_vectors:
-INITSP: .long 0x00000000 /* Initial SP */
-INITPC: .long _START /* Initial PC */
-
-vector02_0F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* Reserved */
-vector10_17:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector18_1F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* TRAP #0 - #15 */
-vector20_2F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-/* Reserved */
-vector30_3F:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector64_127:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector128_191:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-vector192_255:
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
-
-.text
-
-.globl _start
-_start:
- nop
- nop
- move.w #0x2700,%sr /* Mask off Interrupt */
-
- /* Set vector base register at the beginning of the Flash */
- move.l #CONFIG_SYS_FLASH_BASE, %d0
- movec %d0, %VBR
-
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
- movec %d0, %RAMBAR0
-
- move.l #(CONFIG_SYS_INIT_RAM1_ADDR + CONFIG_SYS_INIT_RAM1_CTRL), %d0
- movec %d0, %RAMBAR1
-
- move.l #CONFIG_SYS_MBAR, %d0 /* set MBAR address */
- move.c %d0, %MBAR
-
- /* invalidate and disable cache */
- move.l #0x01040100, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0, %d0
- movec %d0, %ACR0
- movec %d0, %ACR1
- movec %d0, %ACR2
- movec %d0, %ACR3
-
- /* initialize general use internal ram */
- move.l #0, %d0
- move.l #(ICACHE_STATUS), %a1 /* icache */
- move.l #(DCACHE_STATUS), %a2 /* icache */
- move.l %d0, (%a1)
- move.l %d0, (%a2)
-
- /* put relocation table address to a5 */
- move.l #__got_start, %a5
-
- /* setup stack initially on top of internal static ram */
- move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
-
- /*
- * if configured, malloc_f arena will be reserved first,
- * then (and always) gd struct space will be reserved
- */
- move.l %sp, -(%sp)
- move.l #board_init_f_alloc_reserve, %a1
- jsr (%a1)
-
- /* update stack and frame-pointers */
- move.l %d0, %sp
- move.l %sp, %fp
-
- /* initialize reserved area */
- move.l %d0, -(%sp)
- move.l #board_init_f_init_reserve, %a1
- jsr (%a1)
-
- /* run low-level CPU init code (from flash) */
- jbsr cpu_init_f
-
- /* run low-level board init code (from flash) */
- clr.l %sp at -
- jbsr board_init_f
-
- /* board_init_f() does not return */
-
-/******************************************************************************/
-
-/*
- * void relocate_code(addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-.globl relocate_code
-relocate_code:
- link.w %a6,#0
- move.l 8(%a6), %sp /* set new stack pointer */
-
- move.l 12(%a6), %d0 /* Save copy of Global Data pointer */
- move.l 16(%a6), %a0 /* Save copy of Destination Address */
-
- move.l #CONFIG_SYS_MONITOR_BASE, %a1
- move.l #__init_end, %a2
- move.l %a0, %a3
-
- /* copy the code to RAM */
-1:
- move.l (%a1)+, (%a3)+
- cmp.l %a1,%a2
- bgt.s 1b
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- move.l %a0, %a1
- add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
- jmp (%a1)
-
-in_ram:
-
-clear_bss:
- /*
- * Now clear BSS segment
- */
- move.l %a0, %a1
- add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %a0, %d1
- add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1
-6:
- clr.l (%a1)+
- cmp.l %a1,%d1
- bgt.s 6b
-
- /*
- * fix got table in RAM
- */
- move.l %a0, %a1
- add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
- move.l %a1,%a5 /* fix got pointer register a5 */
-
- move.l %a0, %a2
- add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
-
-7:
- move.l (%a1),%d1
- sub.l #_start,%d1
- add.l %a0,%d1
- move.l %d1,(%a1)+
- cmp.l %a2, %a1
- bne 7b
-
- /* calculate relative jump to board_init_r in ram */
- move.l %a0, %a1
- add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
-
- /* set parameters for board_init_r */
- move.l %a0,-(%sp) /* dest_addr */
- move.l %d0,-(%sp) /* gd */
- jsr (%a1)
-
-/******************************************************************************/
-
-/* exception code */
-.globl _fault
-_fault:
- bra _fault
-
-.globl _exc_handler
-_exc_handler:
- SAVE_ALL
- movel %sp,%sp at -
- bsr exc_handler
- addql #4,%sp
- RESTORE_ALL
-
-.globl _int_handler
-_int_handler:
- SAVE_ALL
- movel %sp,%sp at -
- bsr int_handler
- addql #4,%sp
- RESTORE_ALL
-
-/******************************************************************************/
-
-.globl version_string
-version_string:
-.ascii U_BOOT_VERSION_STRING, "\0"
-.align 4
diff --git a/arch/m68k/dts/M5475AFE.dts b/arch/m68k/dts/M5475AFE.dts
deleted file mode 100644
index 7895b520cf72..000000000000
--- a/arch/m68k/dts/M5475AFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475AFE";
- compatible = "fsl,M5475AFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475BFE.dts b/arch/m68k/dts/M5475BFE.dts
deleted file mode 100644
index ffbc2d6a063e..000000000000
--- a/arch/m68k/dts/M5475BFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475BFE";
- compatible = "fsl,M5475BFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475CFE.dts b/arch/m68k/dts/M5475CFE.dts
deleted file mode 100644
index f1033f7efbbf..000000000000
--- a/arch/m68k/dts/M5475CFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475CFE";
- compatible = "fsl,M5475CFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475DFE.dts b/arch/m68k/dts/M5475DFE.dts
deleted file mode 100644
index 69a8faba83ba..000000000000
--- a/arch/m68k/dts/M5475DFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475DFE";
- compatible = "fsl,M5475DFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475EFE.dts b/arch/m68k/dts/M5475EFE.dts
deleted file mode 100644
index 3c898958c8fa..000000000000
--- a/arch/m68k/dts/M5475EFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475EFE";
- compatible = "fsl,M5475EFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475FFE.dts b/arch/m68k/dts/M5475FFE.dts
deleted file mode 100644
index bb3c21588f54..000000000000
--- a/arch/m68k/dts/M5475FFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475FFE";
- compatible = "fsl,M5475FFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/M5475GFE.dts b/arch/m68k/dts/M5475GFE.dts
deleted file mode 100644
index 75080fa7371e..000000000000
--- a/arch/m68k/dts/M5475GFE.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
- */
-
-/dts-v1/;
-/include/ "mcf54xx.dtsi"
-
-/ {
- model = "Freescale M5475GFE";
- compatible = "fsl,M5475GFE";
-};
-
-&fec0 {
- status = "okay";
-};
-
-&fec1 {
- status = "okay";
- mii-base = <0>;
-};
diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
index 0a356b8e3728..47260a101d8a 100644
--- a/arch/m68k/dts/Makefile
+++ b/arch/m68k/dts/Makefile
@@ -32,13 +32,6 @@ dtb-$(CONFIG_TARGET_M54455EVB) += M54455EVB.dtb \
M54455EVB_i66.dtb
dtb-$(CONFIG_TARGET_AMCORE) += amcore.dtb
dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
-dtb-$(CONFIG_TARGET_M5475EVB) += M5475AFE.dtb \
- M5475BFE.dtb \
- M5475CFE.dtb \
- M5475DFE.dtb \
- M5475EFE.dtb \
- M5475FFE.dtb \
- M5475GFE.dtb
targets += $(dtb-y)
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index a1eeabc2af93..fabec0ae92e3 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -19,7 +19,7 @@
#define CONFIG_CF_V3
#endif
-#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
+#if defined(CONFIG_MCF5445x)
#define CONFIG_CF_V4
#elif defined(CONFIG_MCF5441x)
#define CONFIG_CF_V4E /* Four Extra ACRn */
diff --git a/arch/m68k/include/asm/coldfire/dspi.h b/arch/m68k/include/asm/coldfire/dspi.h
index ddd8f3380542..7848dbdff490 100644
--- a/arch/m68k/include/asm/coldfire/dspi.h
+++ b/arch/m68k/include/asm/coldfire/dspi.h
@@ -20,14 +20,8 @@ typedef struct dspi {
u32 tfr; /* 0x34 - PUSHR */
u16 resv1; /* 0x38 */
u16 rfr; /* 0x3A - POPR */
-#ifdef CONFIG_MCF547x_8x
- u32 tfdr[4]; /* 0x3C */
- u8 resv2[0x30]; /* 0x40 */
- u32 rfdr[4]; /* 0x7C */
-#else
u32 tfdr[16]; /* 0x3C */
u32 rfdr[16]; /* 0x7C */
-#endif
} dspi_t;
/* Module configuration */
diff --git a/arch/m68k/include/asm/coldfire/eport.h b/arch/m68k/include/asm/coldfire/eport.h
index 0e64bef5ed62..eb5c66636129 100644
--- a/arch/m68k/include/asm/coldfire/eport.h
+++ b/arch/m68k/include/asm/coldfire/eport.h
@@ -11,18 +11,6 @@
/* Edge Port Module (EPORT) */
typedef struct eport {
-#ifdef CONFIG_MCF547x_8x
- u16 par; /* 0x00 */
- u16 res0; /* 0x02 */
- u8 ddr; /* 0x04 */
- u8 ier; /* 0x05 */
- u16 res1; /* 0x06 */
- u8 dr; /* 0x08 */
- u8 pdr; /* 0x09 */
- u16 res2; /* 0x0A */
- u8 fr; /* 0x0C */
- u8 res3[3]; /* 0x0D */
-#else
u16 par; /* 0x00 Pin Assignment */
u8 ddr; /* 0x02 Data Direction */
u8 ier; /* 0x03 Interrupt Enable */
@@ -30,7 +18,6 @@ typedef struct eport {
u8 pdr; /* 0x05 Pin Data */
u8 fr; /* 0x06 Flag */
u8 res0;
-#endif
} eport_t;
/* EPPAR */
diff --git a/arch/m68k/include/asm/fec.h b/arch/m68k/include/asm/fec.h
index cdb8119d3ea9..759c8cfc43de 100644
--- a/arch/m68k/include/asm/fec.h
+++ b/arch/m68k/include/asm/fec.h
@@ -337,13 +337,8 @@ typedef struct fec {
#define FEC_RESET_DELAY 100
#define FEC_RX_TOUT 100
-#ifdef CONFIG_MCF547x_8x
-typedef struct fec_info_dma fec_info_t;
-#define FEC_T fecdma_t
-#else
typedef struct fec_info_s fec_info_t;
#define FEC_T fec_t
-#endif
int fecpin_setclear(fec_info_t *info, int setclear);
int mii_discover_phy(fec_info_t *info);
diff --git a/arch/m68k/include/asm/immap_547x_8x.h b/arch/m68k/include/asm/immap_547x_8x.h
deleted file mode 100644
index 5e1345684de0..000000000000
--- a/arch/m68k/include/asm/immap_547x_8x.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * MCF547x_8x Internal Memory Map
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#ifndef __IMMAP_547x_8x__
-#define __IMMAP_547x_8x__
-
-#define MMAP_SIU (CONFIG_SYS_MBAR + 0x00000000)
-#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000100)
-#define MMAP_XARB (CONFIG_SYS_MBAR + 0x00000240)
-#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000500)
-#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000700)
-#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800)
-#define MMAP_SLT0 (CONFIG_SYS_MBAR + 0x00000900)
-#define MMAP_SLT1 (CONFIG_SYS_MBAR + 0x00000910)
-#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00)
-#define MMAP_PCI (CONFIG_SYS_MBAR + 0x00000B00)
-#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00)
-#define MMAP_EXTDMA (CONFIG_SYS_MBAR + 0x00000D00)
-#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00000F00)
-#define MMAP_CTM (CONFIG_SYS_MBAR + 0x00007F00)
-#define MMAP_MCDMA (CONFIG_SYS_MBAR + 0x00008000)
-#define MMAP_SCPCI (CONFIG_SYS_MBAR + 0x00008400)
-#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00008600)
-#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00008700)
-#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00008800)
-#define MMAP_UART3 (CONFIG_SYS_MBAR + 0x00008900)
-#define MMAP_DSPI (CONFIG_SYS_MBAR + 0x00008A00)
-#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008F00)
-#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00009000)
-#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009800)
-#define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x0000A000)
-#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x0000A800)
-#define MMAP_USBD (CONFIG_SYS_MBAR + 0x0000B000)
-#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00010000)
-#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001FF00)
-#define MMAP_SEC (CONFIG_SYS_MBAR + 0x00020000)
-
-#include <asm/coldfire/dspi.h>
-#include <asm/coldfire/eport.h>
-#include <asm/coldfire/flexbus.h>
-#include <asm/coldfire/flexcan.h>
-#include <asm/coldfire/intctrl.h>
-
-typedef struct siu {
- u32 mbar; /* 0x00 */
- u32 drv; /* 0x04 */
- u32 rsvd1[2]; /* 0x08 - 0x1F */
- u32 sbcr; /* 0x10 */
- u32 rsvd2[3]; /* 0x14 - 0x1F */
- u32 cs0cfg; /* 0x20 */
- u32 cs1cfg; /* 0x24 */
- u32 cs2cfg; /* 0x28 */
- u32 cs3cfg; /* 0x2C */
- u32 rsvd3[2]; /* 0x30 - 0x37 */
- u32 secsacr; /* 0x38 */
- u32 rsvd4[2]; /* 0x3C - 0x43 */
- u32 rsr; /* 0x44 */
- u32 rsvd5[2]; /* 0x48 - 0x4F */
- u32 jtagid; /* 0x50 */
-} siu_t;
-
-typedef struct sdram {
- u32 mode; /* 0x00 */
- u32 ctrl; /* 0x04 */
- u32 cfg1; /* 0x08 */
- u32 cfg2; /* 0x0c */
-} sdram_t;
-
-typedef struct xlb_arb {
- u32 cfg; /* 0x240 */
- u32 ver; /* 0x244 */
- u32 sr; /* 0x248 */
- u32 imr; /* 0x24c */
- u32 adrcap; /* 0x250 */
- u32 sigcap; /* 0x254 */
- u32 adrto; /* 0x258 */
- u32 datto; /* 0x25c */
- u32 busto; /* 0x260 */
- u32 prien; /* 0x264 */
- u32 pri; /* 0x268 */
-} xlbarb_t;
-
-typedef struct gptmr {
- u8 ocpw;
- u8 octict;
- u8 ctrl;
- u8 mode;
-
- u16 pre; /* Prescale */
- u16 cnt;
-
- u16 pwmwidth;
- u8 pwmop; /* Output Polarity */
- u8 pwmld; /* Immediate Update */
-
- u16 cap; /* Capture internal counter */
- u8 ovfpin; /* Ovf and Pin */
- u8 intr; /* Interrupts */
-} gptmr_t;
-
-typedef struct canex_ctrl {
- can_msg_t msg[16]; /* 0x00 Message Buffer 0-15 */
-} canex_t;
-
-
-typedef struct slt {
- u32 tcnt; /* 0x00 */
- u32 cr; /* 0x04 */
- u32 cnt; /* 0x08 */
- u32 sr; /* 0x0C */
-} slt_t;
-
-typedef struct gpio {
- /* Port Output Data Registers */
- u8 podr_fbctl; /*0x00 */
- u8 podr_fbcs; /*0x01 */
- u8 podr_dma; /*0x02 */
- u8 rsvd1; /*0x03 */
- u8 podr_fec0h; /*0x04 */
- u8 podr_fec0l; /*0x05 */
- u8 podr_fec1h; /*0x06 */
- u8 podr_fec1l; /*0x07 */
- u8 podr_feci2c; /*0x08 */
- u8 podr_pcibg; /*0x09 */
- u8 podr_pcibr; /*0x0A */
- u8 rsvd2; /*0x0B */
- u8 podr_psc3psc2; /*0x0C */
- u8 podr_psc1psc0; /*0x0D */
- u8 podr_dspi; /*0x0E */
- u8 rsvd3; /*0x0F */
-
- /* Port Data Direction Registers */
- u8 pddr_fbctl; /*0x10 */
- u8 pddr_fbcs; /*0x11 */
- u8 pddr_dma; /*0x12 */
- u8 rsvd4; /*0x13 */
- u8 pddr_fec0h; /*0x14 */
- u8 pddr_fec0l; /*0x15 */
- u8 pddr_fec1h; /*0x16 */
- u8 pddr_fec1l; /*0x17 */
- u8 pddr_feci2c; /*0x18 */
- u8 pddr_pcibg; /*0x19 */
- u8 pddr_pcibr; /*0x1A */
- u8 rsvd5; /*0x1B */
- u8 pddr_psc3psc2; /*0x1C */
- u8 pddr_psc1psc0; /*0x1D */
- u8 pddr_dspi; /*0x1E */
- u8 rsvd6; /*0x1F */
-
- /* Port Pin Data/Set Data Registers */
- u8 ppdsdr_fbctl; /*0x20 */
- u8 ppdsdr_fbcs; /*0x21 */
- u8 ppdsdr_dma; /*0x22 */
- u8 rsvd7; /*0x23 */
- u8 ppdsdr_fec0h; /*0x24 */
- u8 ppdsdr_fec0l; /*0x25 */
- u8 ppdsdr_fec1h; /*0x26 */
- u8 ppdsdr_fec1l; /*0x27 */
- u8 ppdsdr_feci2c; /*0x28 */
- u8 ppdsdr_pcibg; /*0x29 */
- u8 ppdsdr_pcibr; /*0x2A */
- u8 rsvd8; /*0x2B */
- u8 ppdsdr_psc3psc2; /*0x2C */
- u8 ppdsdr_psc1psc0; /*0x2D */
- u8 ppdsdr_dspi; /*0x2E */
- u8 rsvd9; /*0x2F */
-
- /* Port Clear Output Data Registers */
- u8 pclrr_fbctl; /*0x30 */
- u8 pclrr_fbcs; /*0x31 */
- u8 pclrr_dma; /*0x32 */
- u8 rsvd10; /*0x33 */
- u8 pclrr_fec0h; /*0x34 */
- u8 pclrr_fec0l; /*0x35 */
- u8 pclrr_fec1h; /*0x36 */
- u8 pclrr_fec1l; /*0x37 */
- u8 pclrr_feci2c; /*0x38 */
- u8 pclrr_pcibg; /*0x39 */
- u8 pclrr_pcibr; /*0x3A */
- u8 rsvd11; /*0x3B */
- u8 pclrr_psc3psc2; /*0x3C */
- u8 pclrr_psc1psc0; /*0x3D */
- u8 pclrr_dspi; /*0x3E */
- u8 rsvd12; /*0x3F */
-
- /* Pin Assignment Registers */
- u16 par_fbctl; /*0x40 */
- u8 par_fbcs; /*0x42 */
- u8 par_dma; /*0x43 */
- u16 par_feci2cirq; /*0x44 */
- u16 rsvd13; /*0x46 */
- u16 par_pcibg; /*0x48 */
- u16 par_pcibr; /*0x4A */
- u8 par_psc3; /*0x4C */
- u8 par_psc2; /*0x4D */
- u8 par_psc1; /*0x4E */
- u8 par_psc0; /*0x4F */
- u16 par_dspi; /*0x50 */
- u8 par_timer; /*0x52 */
- u8 rsvd14; /*0x53 */
-} gpio_t;
-
-typedef struct pci {
- u32 idr; /* 0x00 Device Id / Vendor Id */
- u32 scr; /* 0x04 Status / command */
- u32 ccrir; /* 0x08 Class Code / Revision Id */
- u32 cr1; /* 0x0c Configuration 1 */
- u32 bar0; /* 0x10 Base address register 0 */
- u32 bar1; /* 0x14 Base address register 1 */
- u32 bar2; /* 0x18 NA */
- u32 bar3; /* 0x1c NA */
- u32 bar4; /* 0x20 NA */
- u32 bar5; /* 0x24 NA */
- u32 ccpr; /* 0x28 Cardbus CIS Pointer */
- u32 sid; /* 0x2c Subsystem ID / Subsystem Vendor ID */
- u32 erbar; /* 0x30 Expansion ROM Base Address */
- u32 cpr; /* 0x34 Capabilities Pointer */
- u32 rsvd1; /* 0x38 */
- u32 cr2; /* 0x3c Configuration 2 */
- u32 rsvd2[8]; /* 0x40 - 0x5f */
-
- /* General control / status registers */
- u32 gscr; /* 0x60 Global Status / Control */
- u32 tbatr0a; /* 0x64 Target Base Adr Translation 0 */
- u32 tbatr1a; /* 0x68 Target Base Adr Translation 1 */
- u32 tcr1; /* 0x6c Target Control 1 Register */
- u32 iw0btar; /* 0x70 Initiator Win 0 Base/Translation adr */
- u32 iw1btar; /* 0x74 Initiator Win 1 Base/Translation adr */
- u32 iw2btar; /* 0x78 NA */
- u32 rsvd3; /* 0x7c */
- u32 iwcr; /* 0x80 Initiator Window Configuration */
- u32 icr; /* 0x84 Initiator Control */
- u32 isr; /* 0x88 Initiator Status */
- u32 tcr2; /* 0x8c NA */
- u32 tbatr0; /* 0x90 NA */
- u32 tbatr1; /* 0x94 NA */
- u32 tbatr2; /* 0x98 NA */
- u32 tbatr3; /* 0x9c NA */
- u32 tbatr4; /* 0xa0 NA */
- u32 tbatr5; /* 0xa4 NA */
- u32 intr; /* 0xa8 NA */
- u32 rsvd4[19]; /* 0xac - 0xf7 */
- u32 car; /* 0xf8 Configuration Address */
-} pci_t;
-
-typedef struct pci_arbiter {
- /* Pci Arbiter Registers */
- union {
- u32 acr; /* Arbiter Control */
- u32 asr; /* Arbiter Status */
- };
-} pciarb_t;
-#endif /* __IMMAP_547x_8x__ */
diff --git a/arch/m68k/include/asm/m547x_8x.h b/arch/m68k/include/asm/m547x_8x.h
deleted file mode 100644
index 30f12004b76b..000000000000
--- a/arch/m68k/include/asm/m547x_8x.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * mcf547x_8x.h -- Definitions for Freescale Coldfire 547x_8x
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#ifndef mcf547x_8x_h
-#define mcf547x_8x_h
-
-/*********************************************************************
-* XLB Arbiter (XLB)
-*********************************************************************/
-/* Bit definitions and macros for XARB_CFG */
-#define XARB_CFG_AT (0x00000002)
-#define XARB_CFG_DT (0x00000004)
-#define XARB_CFG_BA (0x00000008)
-#define XARB_CFG_PM(x) (((x)&0x00000003)<<5)
-#define XARB_CFG_SP(x) (((x)&0x00000007)<<8)
-#define XARB_CFG_PLDIS (0x80000000)
-
-/* Bit definitions and macros for XARB_SR */
-#define XARB_SR_AT (0x00000001)
-#define XARB_SR_DT (0x00000002)
-#define XARB_SR_BA (0x00000004)
-#define XARB_SR_TTM (0x00000008)
-#define XARB_SR_ECW (0x00000010)
-#define XARB_SR_TTR (0x00000020)
-#define XARB_SR_TTA (0x00000040)
-#define XARB_SR_MM (0x00000080)
-#define XARB_SR_SEA (0x00000100)
-
-/* Bit definitions and macros for XARB_IMR */
-#define XARB_IMR_ATE (0x00000001)
-#define XARB_IMR_DTE (0x00000002)
-#define XARB_IMR_BAE (0x00000004)
-#define XARB_IMR_TTME (0x00000008)
-#define XARB_IMR_ECWE (0x00000010)
-#define XARB_IMR_TTRE (0x00000020)
-#define XARB_IMR_TTAE (0x00000040)
-#define XARB_IMR_MME (0x00000080)
-#define XARB_IMR_SEAE (0x00000100)
-
-/* Bit definitions and macros for XARB_SIGCAP */
-#define XARB_SIGCAP_TT(x) ((x)&0x0000001F)
-#define XARB_SIGCAP_TBST (0x00000020)
-#define XARB_SIGCAP_TSIZ(x) (((x)&0x00000007)<<7)
-
-/* Bit definitions and macros for XARB_PRIEN */
-#define XARB_PRIEN_M0 (0x00000001)
-#define XARB_PRIEN_M2 (0x00000004)
-#define XARB_PRIEN_M3 (0x00000008)
-
-/* Bit definitions and macros for XARB_PRI */
-#define XARB_PRI_M0P(x) (((x)&0x00000007)<<0)
-#define XARB_PRI_M2P(x) (((x)&0x00000007)<<8)
-#define XARB_PRI_M3P(x) (((x)&0x00000007)<<12)
-
-/*********************************************************************
-* General Purpose I/O (GPIO)
-*********************************************************************/
-/* Bit definitions and macros for GPIO_PAR_FBCTL */
-#define GPIO_PAR_FBCTL_TS(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_FBCTL_TA (0x0004)
-#define GPIO_PAR_FBCTL_RWB(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_FBCTL_OE (0x0040)
-#define GPIO_PAR_FBCTL_BWE0 (0x0100)
-#define GPIO_PAR_FBCTL_BWE1 (0x0400)
-#define GPIO_PAR_FBCTL_BWE2 (0x1000)
-#define GPIO_PAR_FBCTL_BWE3 (0x4000)
-#define GPIO_PAR_FBCTL_TS_GPIO (0)
-#define GPIO_PAR_FBCTL_TS_TBST (2)
-#define GPIO_PAR_FBCTL_TS_TS (3)
-#define GPIO_PAR_FBCTL_RWB_GPIO (0x0000)
-#define GPIO_PAR_FBCTL_RWB_TBST (0x0020)
-#define GPIO_PAR_FBCTL_RWB_RWB (0x0030)
-
-/* Bit definitions and macros for GPIO_PAR_FBCS */
-#define GPIO_PAR_FBCS_CS1 (0x02)
-#define GPIO_PAR_FBCS_CS2 (0x04)
-#define GPIO_PAR_FBCS_CS3 (0x08)
-#define GPIO_PAR_FBCS_CS4 (0x10)
-#define GPIO_PAR_FBCS_CS5 (0x20)
-
-/* Bit definitions and macros for GPIO_PAR_DMA */
-#define GPIO_PAR_DMA_DREQ0(x) (((x)&0x03)<<0)
-#define GPIO_PAR_DMA_DREQ1(x) (((x)&0x03)<<2)
-#define GPIO_PAR_DMA_DACK0(x) (((x)&0x03)<<4)
-#define GPIO_PAR_DMA_DACK1(x) (((x)&0x03)<<6)
-#define GPIO_PAR_DMA_DACKx_GPIO (0)
-#define GPIO_PAR_DMA_DACKx_TOUT (2)
-#define GPIO_PAR_DMA_DACKx_DACK (3)
-#define GPIO_PAR_DMA_DREQx_GPIO (0)
-#define GPIO_PAR_DMA_DREQx_TIN (2)
-#define GPIO_PAR_DMA_DREQx_DREQ (3)
-
-/* Bit definitions and macros for GPIO_PAR_FECI2CIRQ */
-#define GPIO_PAR_FECI2CIRQ_IRQ5 (0x0001)
-#define GPIO_PAR_FECI2CIRQ_IRQ6 (0x0002)
-#define GPIO_PAR_FECI2CIRQ_SCL (0x0004)
-#define GPIO_PAR_FECI2CIRQ_SDA (0x0008)
-#define GPIO_PAR_FECI2CIRQ_E1MDC(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO(x) (((x)&0x0003)<<8)
-#define GPIO_PAR_FECI2CIRQ_E1MII (0x0400)
-#define GPIO_PAR_FECI2CIRQ_E17 (0x0800)
-#define GPIO_PAR_FECI2CIRQ_E0MDC (0x1000)
-#define GPIO_PAR_FECI2CIRQ_E0MDIO (0x2000)
-#define GPIO_PAR_FECI2CIRQ_E0MII (0x4000)
-#define GPIO_PAR_FECI2CIRQ_E07 (0x8000)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_CANRX (0x0000)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_SDA (0x0200)
-#define GPIO_PAR_FECI2CIRQ_E1MDIO_EMDIO (0x0300)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_CANTX (0x0000)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_SCL (0x0080)
-#define GPIO_PAR_FECI2CIRQ_E1MDC_EMDC (0x00C0)
-
-/* Bit definitions and macros for GPIO_PAR_PCIBG */
-#define GPIO_PAR_PCIBG_PCIBG0(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_PCIBG_PCIBG1(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_PCIBG_PCIBG2(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_PCIBG_PCIBG3(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_PCIBG_PCIBG4(x) (((x)&0x0003)<<8)
-
-/* Bit definitions and macros for GPIO_PAR_PCIBR */
-#define GPIO_PAR_PCIBR_PCIBR0(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_PCIBR_PCIBR1(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_PCIBR_PCIBR2(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_PCIBR_PCIBR3(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_PCIBR_PCIBR4(x) (((x)&0x0003)<<8)
-
-/* Bit definitions and macros for GPIO_PAR_PSC3 */
-#define GPIO_PAR_PSC3_TXD3 (0x04)
-#define GPIO_PAR_PSC3_RXD3 (0x08)
-#define GPIO_PAR_PSC3_RTS3(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC3_CTS3(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC3_CTS3_GPIO (0x00)
-#define GPIO_PAR_PSC3_CTS3_BCLK (0x80)
-#define GPIO_PAR_PSC3_CTS3_CTS (0xC0)
-#define GPIO_PAR_PSC3_RTS3_GPIO (0x00)
-#define GPIO_PAR_PSC3_RTS3_FSYNC (0x20)
-#define GPIO_PAR_PSC3_RTS3_RTS (0x30)
-#define GPIO_PAR_PSC3_CTS2_CANRX (0x40)
-
-/* Bit definitions and macros for GPIO_PAR_PSC2 */
-#define GPIO_PAR_PSC2_TXD2 (0x04)
-#define GPIO_PAR_PSC2_RXD2 (0x08)
-#define GPIO_PAR_PSC2_RTS2(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC2_CTS2(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC2_CTS2_GPIO (0x00)
-#define GPIO_PAR_PSC2_CTS2_BCLK (0x80)
-#define GPIO_PAR_PSC2_CTS2_CTS (0xC0)
-#define GPIO_PAR_PSC2_RTS2_GPIO (0x00)
-#define GPIO_PAR_PSC2_RTS2_CANTX (0x10)
-#define GPIO_PAR_PSC2_RTS2_FSYNC (0x20)
-#define GPIO_PAR_PSC2_RTS2_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_PSC1 */
-#define GPIO_PAR_PSC1_TXD1 (0x04)
-#define GPIO_PAR_PSC1_RXD1 (0x08)
-#define GPIO_PAR_PSC1_RTS1(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC1_CTS1(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC1_CTS1_GPIO (0x00)
-#define GPIO_PAR_PSC1_CTS1_BCLK (0x80)
-#define GPIO_PAR_PSC1_CTS1_CTS (0xC0)
-#define GPIO_PAR_PSC1_RTS1_GPIO (0x00)
-#define GPIO_PAR_PSC1_RTS1_FSYNC (0x20)
-#define GPIO_PAR_PSC1_RTS1_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_PSC0 */
-#define GPIO_PAR_PSC0_TXD0 (0x04)
-#define GPIO_PAR_PSC0_RXD0 (0x08)
-#define GPIO_PAR_PSC0_RTS0(x) (((x)&0x03)<<4)
-#define GPIO_PAR_PSC0_CTS0(x) (((x)&0x03)<<6)
-#define GPIO_PAR_PSC0_CTS0_GPIO (0x00)
-#define GPIO_PAR_PSC0_CTS0_BCLK (0x80)
-#define GPIO_PAR_PSC0_CTS0_CTS (0xC0)
-#define GPIO_PAR_PSC0_RTS0_GPIO (0x00)
-#define GPIO_PAR_PSC0_RTS0_FSYNC (0x20)
-#define GPIO_PAR_PSC0_RTS0_RTS (0x30)
-
-/* Bit definitions and macros for GPIO_PAR_DSPI */
-#define GPIO_PAR_DSPI_SOUT(x) (((x)&0x0003)<<0)
-#define GPIO_PAR_DSPI_SIN(x) (((x)&0x0003)<<2)
-#define GPIO_PAR_DSPI_SCK(x) (((x)&0x0003)<<4)
-#define GPIO_PAR_DSPI_CS0(x) (((x)&0x0003)<<6)
-#define GPIO_PAR_DSPI_CS2(x) (((x)&0x0003)<<8)
-#define GPIO_PAR_DSPI_CS3(x) (((x)&0x0003)<<10)
-#define GPIO_PAR_DSPI_CS5 (0x1000)
-#define GPIO_PAR_DSPI_CS3_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS3_CANTX (0x0400)
-#define GPIO_PAR_DSPI_CS3_TOUT (0x0800)
-#define GPIO_PAR_DSPI_CS3_DSPICS (0x0C00)
-#define GPIO_PAR_DSPI_CS2_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS2_CANTX (0x0100)
-#define GPIO_PAR_DSPI_CS2_TOUT (0x0200)
-#define GPIO_PAR_DSPI_CS2_DSPICS (0x0300)
-#define GPIO_PAR_DSPI_CS0_GPIO (0x0000)
-#define GPIO_PAR_DSPI_CS0_FSYNC (0x0040)
-#define GPIO_PAR_DSPI_CS0_RTS (0x0080)
-#define GPIO_PAR_DSPI_CS0_DSPICS (0x00C0)
-#define GPIO_PAR_DSPI_SCK_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SCK_BCLK (0x0010)
-#define GPIO_PAR_DSPI_SCK_CTS (0x0020)
-#define GPIO_PAR_DSPI_SCK_SCK (0x0030)
-#define GPIO_PAR_DSPI_SIN_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SIN_RXD (0x0008)
-#define GPIO_PAR_DSPI_SIN_SIN (0x000C)
-#define GPIO_PAR_DSPI_SOUT_GPIO (0x0000)
-#define GPIO_PAR_DSPI_SOUT_TXD (0x0002)
-#define GPIO_PAR_DSPI_SOUT_SOUT (0x0003)
-
-/* Bit definitions and macros for GPIO_PAR_TIMER */
-#define GPIO_PAR_TIMER_TOUT2 (0x01)
-#define GPIO_PAR_TIMER_TIN2(x) (((x)&0x03)<<1)
-#define GPIO_PAR_TIMER_TOUT3 (0x08)
-#define GPIO_PAR_TIMER_TIN3(x) (((x)&0x03)<<4)
-#define GPIO_PAR_TIMER_TIN3_CANRX (0x00)
-#define GPIO_PAR_TIMER_TIN3_IRQ (0x20)
-#define GPIO_PAR_TIMER_TIN3_TIN (0x30)
-#define GPIO_PAR_TIMER_TIN2_CANRX (0x00)
-#define GPIO_PAR_TIMER_TIN2_IRQ (0x04)
-#define GPIO_PAR_TIMER_TIN2_TIN (0x06)
-
-/*********************************************************************
-* Slice Timer (SLT)
-*********************************************************************/
-#define SLT_CR_RUN (0x04000000)
-#define SLT_CR_IEN (0x02000000)
-#define SLT_CR_TEN (0x01000000)
-
-#define SLT_SR_BE (0x02000000)
-#define SLT_SR_ST (0x01000000)
-
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
-#define INT0_LO_RSVD0 (0)
-#define INT0_LO_EPORT1 (1)
-#define INT0_LO_EPORT2 (2)
-#define INT0_LO_EPORT3 (3)
-#define INT0_LO_EPORT4 (4)
-#define INT0_LO_EPORT5 (5)
-#define INT0_LO_EPORT6 (6)
-#define INT0_LO_EPORT7 (7)
-#define INT0_LO_EP0ISR (15)
-#define INT0_LO_EP1ISR (16)
-#define INT0_LO_EP2ISR (17)
-#define INT0_LO_EP3ISR (18)
-#define INT0_LO_EP4ISR (19)
-#define INT0_LO_EP5ISR (20)
-#define INT0_LO_EP6ISR (21)
-#define INT0_LO_USBISR (22)
-#define INT0_LO_USBAISR (23)
-#define INT0_LO_USB (24)
-#define INT1_LO_DSPI_RFOF_TFUF (25)
-#define INT1_LO_DSPI_RFOF (26)
-#define INT1_LO_DSPI_RFDF (27)
-#define INT1_LO_DSPI_TFUF (28)
-#define INT1_LO_DSPI_TCF (29)
-#define INT1_LO_DSPI_TFFF (30)
-#define INT1_LO_DSPI_EOQF (31)
-
-#define INT0_HI_UART3 (32)
-#define INT0_HI_UART2 (33)
-#define INT0_HI_UART1 (34)
-#define INT0_HI_UART0 (35)
-#define INT0_HI_COMMTIM_TC (36)
-#define INT0_HI_SEC (37)
-#define INT0_HI_FEC1 (38)
-#define INT0_HI_FEC0 (39)
-#define INT0_HI_I2C (40)
-#define INT0_HI_PCIARB (41)
-#define INT0_HI_CBPCI (42)
-#define INT0_HI_XLBPCI (43)
-#define INT0_HI_XLBARB (47)
-#define INT0_HI_DMA (48)
-#define INT0_HI_CAN0_ERROR (49)
-#define INT0_HI_CAN0_BUSOFF (50)
-#define INT0_HI_CAN0_MBOR (51)
-#define INT0_HI_SLT1 (53)
-#define INT0_HI_SLT0 (54)
-#define INT0_HI_CAN1_ERROR (55)
-#define INT0_HI_CAN1_BUSOFF (56)
-#define INT0_HI_CAN1_MBOR (57)
-#define INT0_HI_GPT3 (59)
-#define INT0_HI_GPT2 (60)
-#define INT0_HI_GPT1 (61)
-#define INT0_HI_GPT0 (62)
-
-/*********************************************************************
-* General Purpose Timers (GPTMR)
-*********************************************************************/
-/* Enable and Mode Select */
-#define GPT_OCT(x) (x & 0x3)<<4 /* Output Compare Type */
-#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */
-#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */
-#define GPT_CTRL_CE 0x10 /* Counter Enable */
-#define GPT_CTRL_STPCNT 0x04 /* Stop continous */
-#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */
-#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */
-#define GPT_MODE_GPIO(x) (x & 0x3)<<4 /* Gpio Mode Type */
-#define GPT_TMS_ICT 0x01 /* Input Capture Enable */
-#define GPT_TMS_OCT 0x02 /* Output Capture Enable */
-#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */
-#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */
-
-#define GPT_PWM_WIDTH(x) (x & 0xffff)
-
-/* Status */
-#define GPT_STA_CAPTURE(x) (x & 0xffff)
-
-#define GPT_OVFPIN_OVF(x) (x & 0x70)
-#define GPT_OVFPIN_PIN 0x01
-
-#define GPT_INT_TEXP 0x08
-#define GPT_INT_PWMP 0x04
-#define GPT_INT_COMP 0x02
-#define GPT_INT_CAPT 0x01
-
-/*********************************************************************
-* PCI
-*********************************************************************/
-
-/* Bit definitions and macros for SCR */
-#define PCI_SCR_PE (0x80000000) /* Parity Error detected */
-#define PCI_SCR_SE (0x40000000) /* System error signalled */
-#define PCI_SCR_MA (0x20000000) /* Master aboart received */
-#define PCI_SCR_TR (0x10000000) /* Target abort received */
-#define PCI_SCR_TS (0x08000000) /* Target abort signalled */
-#define PCI_SCR_DT (0x06000000) /* PCI_DEVSEL timing */
-#define PCI_SCR_DP (0x01000000) /* Master data parity err */
-#define PCI_SCR_FC (0x00800000) /* Fast back-to-back */
-#define PCI_SCR_R (0x00400000) /* Reserved */
-#define PCI_SCR_66M (0x00200000) /* 66Mhz */
-#define PCI_SCR_C (0x00100000) /* Capabilities list */
-#define PCI_SCR_F (0x00000200) /* Fast back-to-back enable */
-#define PCI_SCR_S (0x00000100) /* SERR enable */
-#define PCI_SCR_ST (0x00000080) /* Addr and Data stepping */
-#define PCI_SCR_PER (0x00000040) /* Parity error response */
-#define PCI_SCR_V (0x00000020) /* VGA palette snoop enable */
-#define PCI_SCR_MW (0x00000010) /* Memory write and invalidate enable */
-#define PCI_SCR_SP (0x00000008) /* Special cycle monitor or ignore */
-#define PCI_SCR_B (0x00000004) /* Bus master enable */
-#define PCI_SCR_M (0x00000002) /* Memory access control */
-#define PCI_SCR_IO (0x00000001) /* I/O access control */
-
-#define PCI_CR1_BIST(x) ((x & 0xFF) << 24) /* Built in self test */
-#define PCI_CR1_HDR(x) ((x & 0xFF) << 16) /* Header type */
-#define PCI_CR1_LTMR(x) ((x & 0xF8) << 8) /* Latency timer */
-#define PCI_CR1_CLS(x) (x & 0x0F) /* Cache line size */
-
-#define PCI_BAR_BAR0(x) (x & 0xFFFC0000)
-#define PCI_BAR_BAR1(x) (x & 0xC0000000)
-#define PCI_BAR_PREF (0x00000004) /* Prefetchable access */
-#define PCI_BAR_RANGE (0x00000002) /* Fixed to 00 */
-#define PCI_BAR_IO_M (0x00000001) /* IO / memory space */
-
-#define PCI_CR2_MAXLAT(x) ((x & 0xFF) << 24) /* Maximum latency */
-#define PCI_CR2_MINGNT(x) ((x & 0xFF) << 16) /* Minimum grant */
-#define PCI_CR2_INTPIN(x) ((x & 0xFF) << 8) /* Interrupt Pin */
-#define PCI_CR2_INTLIN(x) (x & 0xFF) /* Interrupt Line */
-
-#define PCI_GSCR_DRD (0x80000000) /* Delayed read discarded */
-#define PCI_GSCR_PE (0x20000000) /* PCI_PERR detected */
-#define PCI_GSCR_SE (0x10000000) /* SERR detected */
-#define PCI_GSCR_ER (0x08000000) /* Error response detected */
-#define PCI_GSCR_DRDE (0x00008000) /* Delayed read discarded enable */
-#define PCI_GSCR_PEE (0x00002000) /* PERR detected interrupt enable */
-#define PCI_GSCR_SEE (0x00001000) /* SERR detected interrupt enable */
-#define PCI_GSCR_PR (0x00000001) /* PCI reset */
-
-#define PCI_TCR1_LD (0x01000000) /* Latency rule disable */
-#define PCI_TCR1_PID (0x00020000) /* Prefetch invalidate and disable */
-#define PCI_TCR1_P (0x00010000) /* Prefetch reads */
-#define PCI_TCR1_WCD (0x00000100) /* Write combine disable */
-
-#define PCI_TCR1_B5E (0x00002000) /* */
-#define PCI_TCR1_B4E (0x00001000) /* */
-#define PCI_TCR1_B3E (0x00000800) /* */
-#define PCI_TCR1_B2E (0x00000400) /* */
-#define PCI_TCR1_B1E (0x00000200) /* */
-#define PCI_TCR1_B0E (0x00000100) /* */
-#define PCI_TCR1_CR (0x00000001) /* */
-
-#define PCI_TBATR_BAT0(x) (x & 0xFFFC0000)
-#define PCI_TBATR_BAT1(x) (x & 0xC0000000)
-#define PCI_TBATR_EN (0x00000001) /* Enable */
-
-#define PCI_IWCR_W0C_IO (0x08000000) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W0C_PRC_RDMUL (0x04000000) /* PCI Memory Read multiple */
-#define PCI_IWCR_W0C_PRC_RDLN (0x02000000) /* PCI Memory Read line */
-#define PCI_IWCR_W0C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W0C_EN (0x01000000) /* Enable - Register initialize */
-#define PCI_IWCR_W1C_IO (0x00080000) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W1C_PRC_RDMUL (0x00040000) /* PCI Memory Read multiple */
-#define PCI_IWCR_W1C_PRC_RDLN (0x00020000) /* PCI Memory Read line */
-#define PCI_IWCR_W1C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W1C_EN (0x00010000) /* Enable - Register initialize */
-#define PCI_IWCR_W2C_IO (0x00000800) /* Windows Maps to PCI I/O */
-#define PCI_IWCR_W2C_PRC_RDMUL (0x00000400) /* PCI Memory Read multiple */
-#define PCI_IWCR_W2C_PRC_RDLN (0x00000200) /* PCI Memory Read line */
-#define PCI_IWCR_W2C_PRC_RD (0x00000000) /* PCI Memory Read */
-#define PCI_IWCR_W2C_EN (0x00000100) /* Enable - Register initialize */
-
-#define PCI_ICR_REE (0x04000000) /* Retry error enable */
-#define PCI_ICR_IAE (0x02000000) /* Initiator abort enable */
-#define PCI_ICR_TAE (0x01000000) /* Target abort enable */
-#define PCI_ICR_MAXRETRY(x) ((x) & 0x000000FF)
-
-#define PCIARB_ACR_DS (0x80000000)
-#define PCIARB_ARC_EXTMINTEN(x) (((x)&0x1F) << 17)
-#define PCIARB_ARC_INTMINTEN (0x00010000)
-#define PCIARB_ARC_EXTMPRI(x) (((x)&0x1F) << 1)
-#define PCIARB_ARC_INTMPRI (0x00000001)
-
-#endif /* mcf547x_8x_h */
diff --git a/arch/m68k/lib/cache.c b/arch/m68k/lib/cache.c
index 68f2eef584b7..aa2b93e0e0fb 100644
--- a/arch/m68k/lib/cache.c
+++ b/arch/m68k/lib/cache.c
@@ -80,7 +80,7 @@ void icache_invalid(void)
}
/*
- * data cache only for ColdFire V4 such as MCF547x_8x, MCF5445x
+ * data cache only for ColdFire V4 such as MCF5445x
* the dcache will be dummy in ColdFire V2 and V3
*/
void dcache_enable(void)
diff --git a/board/freescale/m547xevb/Kconfig b/board/freescale/m547xevb/Kconfig
deleted file mode 100644
index 8cfe20ab8dd4..000000000000
--- a/board/freescale/m547xevb/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_M5475EVB
-
-config SYS_CPU
- default "mcf547x_8x"
-
-config SYS_BOARD
- default "m547xevb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "M5475EVB"
-
-endif
diff --git a/board/freescale/m547xevb/MAINTAINERS b/board/freescale/m547xevb/MAINTAINERS
deleted file mode 100644
index 0d821eb011f1..000000000000
--- a/board/freescale/m547xevb/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-M547XEVB BOARD
-M: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
-S: Maintained
-F: board/freescale/m547xevb/
-F: include/configs/M5475EVB.h
-F: configs/M5475AFE_defconfig
-F: configs/M5475BFE_defconfig
-F: configs/M5475CFE_defconfig
-F: configs/M5475DFE_defconfig
-F: configs/M5475EFE_defconfig
-F: configs/M5475FFE_defconfig
-F: configs/M5475GFE_defconfig
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
deleted file mode 100644
index 29fe9dad775f..000000000000
--- a/board/freescale/m547xevb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y = m547xevb.o
diff --git a/board/freescale/m547xevb/README b/board/freescale/m547xevb/README
deleted file mode 100644
index 6b4fbe5c25d3..000000000000
--- a/board/freescale/m547xevb/README
+++ /dev/null
@@ -1,271 +0,0 @@
-Freescale MCF5475EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew at freescale.com)
-Created Jan 08, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m547xevb/m547xevb.c Dram setup, IDE pre init, and PCI init
-- board/freescale/m547xevb/mii.c MII init
-- board/freescale/m547xevb/Makefile Makefile
-- board/freescale/m547xevb/config.mk config make
-- board/freescale/m547xevb/u-boot.lds Linker description
-
-- arch/m68k/cpu/mcf547x_8x/cpu.c cpu specific code
-- arch/m68k/cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
-- arch/m68k/cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
-- arch/m68k/cpu/mcf547x_8x/slicetimer.c Timer support
-- arch/m68k/cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf547x_8x/Makefile Makefile
-- arch/m68k/cpu/mcf547x_8x/config.mk config make
-- arch/m68k/cpu/mcf547x_8x/start.S start up assembly code
-
-- board/freescale/m547xevb/README This readme file
-
-- drivers/dma/MCD_dmaApi.c DMA API functions
-- drivers/dma/MCD_tasks.c DMA Tasks
-- drivers/dma/MCD_tasksInit.c DMA Tasks Init
-- drivers/net/fsl_mcdmafec.c ColdFire common DMA FEC driver
-- drivers/serial/mcfuart.c ColdFire common UART driver
-
-- include/MCD_dma.h DMA header file
-- include/MCD_progCheck.h DMA header file
-- include/MCD_tasksInit.h DMA header file
-- include/asm-m68k/bitops.h Bit operation function export
-- include/asm-m68k/byteorder.h Byte order functions
-- include/asm-m68k/errno.h Error Number definition
-- include/asm-m68k/fec.h FEC structure and definition
-- include/asm-m68k/fsl_i2c.h I2C structure and definition
-- include/asm-m68k/fsl_mcddmafec.h DMA FEC structure and definition
-- include/asm-m68k/global_data.h Global data structure
-- include/asm-m68k/immap.h ColdFire specific header file and driver macros
-- include/asm-m68k/immap_547x_8x.h mcf547x_8x specific header file
-- include/asm-m68k/io.h io functions
-- include/asm-m68k/m547x_8x.h mcf547x_8x specific header file
-- include/asm-m68k/posix_types.h Posix
-- include/asm-m68k/processor.h header file
-- include/asm-m68k/ptrace.h Exception structure
-- include/asm-m68k/rtc.h Realtime clock header file
-- include/asm-m68k/string.h String function export
-- include/asm-m68k/timer.h Timer structure and definition
-- include/asm-m68k/types.h Data types definition
-- include/asm-m68k/uart.h Uart structure and definition
-- include/asm-m68k/u-boot.h U-Boot structure
-
-- include/configs/M5475EVB.h Board specific configuration file
-
-- arch/m68k/lib/board.c board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/traps.c Exception init code
-
-1 MCF547x specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M5475EVB Development Board
-CONFIG_MCF547x_8x -- define for all MCF547x_8x CPUs
-CONFIG_M547x -- define for all Freescale MCF547x CPUs
-CONFIG_M5475 -- define for M5475EVB board
-
-CONFIG_MCFUART -- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE -- define UART baudrate
-
-CONFIG_FSLDMAFEC -- define to use common dma FEC driver
-CONFIG_MII -- enable to use MII driver
-CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
-CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
-CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
-CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
-CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP -- set FEC timeout loop
-CONFIG_HAS_ETH1 -- define to enable second FEC in U-Boot
-
-CONFIG_CMD_USB -- enable USB commands
-CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
-CONFIG_USB_STORAGE -- enable USB Storage device
-CONFIG_DOS_PARTITION -- enable DOS read/write
-
-CONFIG_SLTTMR -- define to use SLT timer
-
-CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
-CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED -- define for I2C speed
-CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
-CONFIG_SYS_IMMR -- define for MBAR offset
-
-CONFIG_PCI -- define for PCI support
-CONFIG_PCI_PNP -- define for Plug n play support
-CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
-CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
-CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
-CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
-CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
-CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
-CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
-CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
-CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
-CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
-
-CONFIG_SYS_MBAR -- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
-
-CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
- Flash: 0xFF800000-0xFFFFFFFF (8MB)
- DDR: 0x00000000-0x3FFFFFFF (1024MB)
- SRAM: 0xF2000000-0xF2000FFF (4KB)
- PCI: 0x70000000-0x8FFFFFFF (512MB)
- IP: 0xF0000000-0xFFFFFFFF (256MB)
-
-3. COMPILATION
-==============
-3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
- version) from codesourcery.com was used. Download it from:
- http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
- export CROSS_COMPILE=cross-compile-prefix
- cd u-boot-1.x.x
- make distclean
- make M5475AFE_config, or - boot 2MB, RAM 64MB
- make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
- make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
- make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
- make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
- make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
- make M5475GFE_config, or - boot 2MB, RAM 64MB
- make
-
-5. SCREEN DUMP
-==============
-5.1
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:47:44)
-
-CPU: Freescale MCF5475
- CPU CLK 266 Mhz BUS CLK 133 Mhz
-Board: Freescale FireEngine 5475 EVB
-I2C: ready
-DRAM: 64 MB
-FLASH: 18 MB
-In: serial
-Out: serial
-Err: serial
-Net: FEC0, FEC1
--> pri
-bootdelay=1
-baudrate=115200
-ethaddr=00:e0:0c:bc:e5:60
-eth1addr=00:e0:0c:bc:e5:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=M547xEVB
-netdev=eth0
-loadaddr=10000
-u-boot=u-boot.bin
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC0
-mem=65024k
-
-Environment size: 433/8188 bytes
--> bdin
-memstart = 0x00000000
-memsize = 0x04000000
-flashstart = 0xFF800000
-flashsize = 0x01200000
-flashoffset = 0x00000000
-sramstart = 0xF2000000
-sramsize = 0x00001000
-mbar = 0xF0000000
-busfreq = 133.333 MHz
-pcifreq = 0 MHz
-ethaddr = 00:E0:0C:BC:E5:60
-eth1addr = 00:E0:0C:BC:E5:61
-ip_addr = 192.162.1.2
-baudrate = 115200 bps
--> ?
-? - alias for 'help'
-base - print or set address offset
-bdinfo - print Board Info structure
-boot - boot default, i.e., run 'bootcmd'
-bootd - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-bootvx - Boot vxWorks from an ELF image
-cmp - memory compare
-coninfo - print console devices and information
-cp - memory copy
-crc32 - checksum calculation
-dcache - enable or disable data cache
-echo - echo args to console
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-go - start application at address 'addr'
-help - print online help
-i2c - I2C sub-system
-icache - enable or disable instruction cache
-iminfo - print header information for application image
-imls - list all images found in flash
-itest - return true/false on integer compare
-loadb - load binary file over serial line (kermit mode)
-loads - load S-Record file over serial line
-loady - load binary file over serial line (ymodem mode)
-loop - infinite loop on address range
-md - memory display
-mii - MII utility commands
-mm - memory modify (auto-incrementing)
-mtest - simple RAM test
-mw - memory write (fill)
-nfs - boot image via network using NFS protocol
-nm - memory modify (constant address)
-pci - list and access PCI Configuration Space
-ping - send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset - Perform RESET of the CPU
-run - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv - set environment variables
-sleep - delay execution for some time
-source - run script from memory
-tftpboot- boot image via network using TFTP protocol
-usb - USB sub-system
-usbboot - boot from USB device
-version - print monitor version
--> usb start
-(Re)start USB...
-USB: OHCI pci controller (1131, 1561) found @(0:17:0)
-OHCI regs address 0x80000000
-scanning bus for devices... 2 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
-->
diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c
deleted file mode 100644
index 1568f455e927..000000000000
--- a/board/freescale/m547xevb/m547xevb.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-#include <config.h>
-#include <common.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/global_data.h>
-#include <asm/immap.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- puts("Board: ");
- puts("Freescale FireEngine 5475 EVB\n");
- return 0;
-};
-
-int dram_init(void)
-{
- siu_t *siu = (siu_t *) (MMAP_SIU);
- sdram_t *sdram = (sdram_t *)(MMAP_SDRAM);
- u32 dramsize, i;
-#ifdef CONFIG_SYS_DRAMSZ1
- u32 temp;
-#endif
-
- out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH);
-
- dramsize = CONFIG_SYS_DRAMSZ * 0x100000;
- for (i = 0x13; i < 0x20; i++) {
- if (dramsize == (1 << i))
- break;
- }
- i--;
- out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i);
-
-#ifdef CONFIG_SYS_DRAMSZ1
- temp = CONFIG_SYS_DRAMSZ1 * 0x100000;
- for (i = 0x13; i < 0x20; i++) {
- if (temp == (1 << i))
- break;
- }
- i--;
- dramsize += temp;
- out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i);
-#endif
-
- out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1);
- out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2);
-
- /* Issue PALL */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
- /* Issue LEMR */
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD);
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000);
-
- udelay(500);
-
- /* Issue PALL */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2);
-
- /* Perform two refresh cycles */
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
- out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4);
-
- out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE);
-
- out_be32(&sdram->ctrl,
- (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00);
-
- udelay(100);
-
- gd->ram_size = dramsize;
-
- return 0;
-};
-
-int testdram(void)
-{
- /* TODO: XXX XXX XXX */
- printf("DRAM test not implemented!\n");
-
- return (0);
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-extern void pci_mcf547x_8x_init(struct pci_controller *hose);
-
-void pci_init_board(void)
-{
- pci_mcf547x_8x_init(&hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/configs/M5475AFE_defconfig b/configs/M5475AFE_defconfig
deleted file mode 100644
index a919bf720bba..000000000000
--- a/configs/M5475AFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475AFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475BFE_defconfig b/configs/M5475BFE_defconfig
deleted file mode 100644
index b9f4904134a4..000000000000
--- a/configs/M5475BFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475BFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475CFE_defconfig b/configs/M5475CFE_defconfig
deleted file mode 100644
index ae5853572633..000000000000
--- a/configs/M5475CFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475CFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475DFE_defconfig b/configs/M5475DFE_defconfig
deleted file mode 100644
index a9d085f3707a..000000000000
--- a/configs/M5475DFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475DFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475EFE_defconfig b/configs/M5475EFE_defconfig
deleted file mode 100644
index 38d31ace0120..000000000000
--- a/configs/M5475EFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475EFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_VIDEO,SYS_USBCTRL"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475FFE_defconfig b/configs/M5475FFE_defconfig
deleted file mode 100644
index 0a620c39f1a1..000000000000
--- a/configs/M5475FFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475FFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=32,SYS_VIDEO,SYS_USBCTRL,SYS_DRAMSZ1=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/configs/M5475GFE_defconfig b/configs/M5475GFE_defconfig
deleted file mode 100644
index 05b0ba7af8cd..000000000000
--- a/configs/M5475GFE_defconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-CONFIG_M68K=y
-CONFIG_SYS_TEXT_BASE=0xFF800000
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_TARGET_M5475EVB=y
-CONFIG_DEFAULT_DEVICE_TREE="M5475GFE"
-CONFIG_SYS_EXTRA_OPTIONS="SYS_BUSCLK=133333333,SYS_BOOTSZ=4,SYS_DRAMSZ=64"
-CONFIG_BOOTDELAY=1
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="-> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_ENV_ADDR=0xFF840000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_ETH=y
-CONFIG_FSLDMAFEC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PHY=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst
index 44e1a5dfa384..698e288c4487 100644
--- a/doc/arch/m68k.rst
+++ b/doc/arch/m68k.rst
@@ -72,7 +72,7 @@ A bash script similar to the one below may be used:
export CROSS_COMPILE=/opt/toolchains/m68k/gcc-4.9.0-nolibc/bin/m68k-linux-
- board=M5475DFE
+ board=M5249EVB
make distclean
make ${board}_defconfig
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 0987266c96ef..ca06b35316d3 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -11,11 +11,7 @@
#include <asm/global_data.h>
#include <linux/delay.h>
-#ifdef CONFIG_MCF547x_8x
-#include <asm/fsl_mcdmafec.h>
-#else
#include <asm/fec.h>
-#endif
#include <asm/immap.h>
#include <linux/mii.h>
diff --git a/env/Kconfig b/env/Kconfig
index 1411f9e815ec..ea0ee1e8bafa 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -82,7 +82,7 @@ config ENV_IS_IN_FLASH
depends on !CHAIN_OF_TRUST
default y if ARCH_CINTEGRATOR
default y if ARCH_INTEGRATOR_CP
- default y if M548x || M547x || M5282 || MCF547x_8x
+ default y if M548x || M547x || M5282
default y if MCF532x || MCF52x2
default y if MPC86xx || MPC83xx
default y if ARCH_MPC8572 || ARCH_MPC8548 || ARCH_MPC8641
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
deleted file mode 100644
index 406830c98d56..000000000000
--- a/include/configs/M5475EVB.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF5475 board.
- *
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew at freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M5475EVB_H
-#define _M5475EVB_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-
-#undef CONFIG_HW_WATCHDOG
-#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */
-
-#define CONFIG_SLTTMR
-
-#ifdef CONFIG_FSLDMAFEC
-# define CONFIG_MII_INIT 1
-# define CONFIG_HAS_ETH1
-# define CONFIG_SYS_DMA_USE_INTSRAM 1
-# define CONFIG_SYS_DISCOVER_PHY
-# define CONFIG_SYS_RX_ETH_BUFFER 32
-# define CONFIG_SYS_TX_ETH_BUFFER 48
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CONFIG_SYS_DISCOVER_PHY
-# define FECDUPLEX FULL
-# define FECSPEED _100BASET
-# else
-# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# endif
-# endif /* CONFIG_SYS_DISCOVER_PHY */
-
-# define CONFIG_IPADDR 192.162.1.2
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_SERVERIP 192.162.1.1
-# define CONFIG_GATEWAYIP 192.162.1.1
-#endif
-
-#ifdef CONFIG_CMD_USB
-# define CONFIG_USB_OHCI_NEW
-
-# define CONFIG_PCI_OHCI
-
-# undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-# undef CONFIG_SYS_USB_OHCI_CPU_INIT
-# define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
-# define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561"
-# define CONFIG_SYS_OHCI_SWAP_REG_ACCESS
-#endif
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 80000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x00008F00
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-
-/* PCI */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
-
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
-
-#define CONFIG_SYS_PCI_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
-#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_SYS_PCI_IO_BUS 0x71000000
-#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS
-#define CONFIG_SYS_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_SYS_PCI_CFG_BUS 0x70000000
-#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
-#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
-#endif
-
-#define CONFIG_UDP_CHECKSUM
-
-#ifdef CONFIG_MCFFEC
-# define CONFIG_IPADDR 192.162.1.2
-# define CONFIG_NETMASK 255.255.255.0
-# define CONFIG_SERVERIP 192.162.1.1
-# define CONFIG_GATEWAYIP 192.162.1.1
-#endif /* FEC_ENET */
-
-#define CONFIG_HOSTNAME "M547xEVB"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "loadaddr=10000\0" \
- "u-boot=u-boot.bin\0" \
- "load=tftp ${loadaddr) ${u-boot}\0" \
- "upd=run load; run prog\0" \
- "prog=prot off bank 1;" \
- "era ff800000 ff83ffff;" \
- "cp.b ${loadaddr} ff800000 ${filesize};"\
- "save\0" \
- ""
-
-#define CONFIG_PRAM 512 /* 512 KB */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00010000
-
-#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK
-#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
-
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000)
-#define CONFIG_SYS_INTSRAMSZ 0x8000
-
-/*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL 0x21
-#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
-#define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM1_CTRL 0x21
-#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_CFG1 0x73711630
-#define CONFIG_SYS_SDRAM_CFG2 0x46770000
-#define CONFIG_SYS_SDRAM_CTRL 0xE10B0000
-#define CONFIG_SYS_SDRAM_EMOD 0x40010000
-#define CONFIG_SYS_SDRAM_MODE 0x018D0000
-#define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA
-#ifdef CONFIG_SYS_DRAMSZ1
-# define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1)
-#else
-# define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_FLASH_CFI
-# define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE)
-# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
-#ifdef CONFIG_SYS_NOR1SZ
-# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-# define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20)
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
-#else
-# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-# define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20)
-#endif
-#endif
-
-/* Configuration for environment
- * Environment is not embedded in u-boot but@offset 0x40000 on the flash.
- * First time runing may have env crc error warning if there is
- * no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \
- CF_CACR_IDCM)
-#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
- CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \
- CF_CACR_IEC | CF_CACR_ICINVA)
-#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
- CF_CACR_DEC | CF_CACR_DDCM_P | \
- CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Chipselect bank definitions
- */
-/*
- * CS0 - NOR Flash 1, 2, 4, or 8MB
- * CS1 - NOR Flash
- * CS2 - Available
- * CS3 - Available
- * CS4 - Available
- * CS5 - Available
- */
-#define CONFIG_SYS_CS0_BASE 0xFF800000
-#define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001)
-#define CONFIG_SYS_CS0_CTRL 0x00101980
-
-#ifdef CONFIG_SYS_NOR1SZ
-#define CONFIG_SYS_CS1_BASE 0xE0000000
-#define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001)
-#define CONFIG_SYS_CS1_CTRL 0x00101D80
-#endif
-
-#endif /* _M5475EVB_H */
diff --git a/include/fsl_dspi.h b/include/fsl_dspi.h
index 4fec83549e1f..ebe1803e4665 100644
--- a/include/fsl_dspi.h
+++ b/include/fsl_dspi.h
@@ -21,14 +21,8 @@ struct dspi {
u32 irsr; /* 0x30 */
u32 tfr; /* 0x34 - PUSHR */
u32 rfr; /* 0x38 - POPR */
-#ifdef CONFIG_MCF547x_8x
- u32 tfdr[4]; /* 0x3C */
- u8 resv2[0x30]; /* 0x40 */
- u32 rfdr[4]; /* 0x7C */
-#else
u32 tfdr[16]; /* 0x3C */
u32 rfdr[16]; /* 0x7C */
-#endif
};
/* Module configuration */
--
2.17.1
next prev parent reply other threads:[~2021-05-15 1:34 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-15 1:34 [PATCH 01/27] pci: Remove non-DM board_pci_fixup_dev() declaration Tom Rini
2021-05-15 1:34 ` [PATCH 02/27] ppc: Drop MPC837XERDB_SLAVE for now Tom Rini
2021-05-15 2:22 ` Sinan Akman
2021-07-08 2:51 ` Tom Rini
2021-05-15 1:34 ` [PATCH 03/27] arm: Remove integratorap* boards Tom Rini
2021-05-15 12:27 ` Linus Walleij
2021-05-15 1:34 ` [PATCH 04/27] m68k: Remove M5485 boards Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` Tom Rini [this message]
2021-07-08 2:52 ` [PATCH 05/27] m68k: Remove M5475x boards Tom Rini
2021-05-15 1:34 ` [PATCH 06/27] mips: Remove malta boards Tom Rini
2021-05-17 23:32 ` Daniel Schwierzeck
2021-05-18 1:36 ` Tom Rini
2021-05-15 1:34 ` [PATCH 07/27] ppc: Remove sbc8349 board Tom Rini
2021-05-15 19:16 ` Paul Gortmaker
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 08/27] ppc: Remove many T104x boards Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 09/27] ppc: Remove mpc8308_p1m board Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 10/27] ppc: Remove ve8313 board Tom Rini
2021-05-15 4:34 ` Heiko Schocher
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 11/27] ppc: Remove MPC8313ERDB boards Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 12/27] ppc: Remove caddy2 / vme8349 boards Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 13/27] ppc: Remove sbc8548 boards Tom Rini
2021-05-15 19:18 ` Paul Gortmaker
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 14/27] ppc: Remove TQM834x board Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 15/27] ppc: Remove MPC8541CDS board Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 16/27] ppc: Remove MPC8555CDS boards Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 17/27] ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-07-15 8:24 ` gianluca
2021-07-15 21:06 ` Tom Rini
2021-07-19 6:19 ` gianluca
2021-05-15 1:34 ` [PATCH 18/27] ppc: Remove MPC8568MDS board Tom Rini
2021-07-08 2:52 ` Tom Rini
2021-05-15 1:34 ` [PATCH 19/27] ppc: Remove kmcoge4 board Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 20/27] ppc: Remove xpedite boards Tom Rini
2021-05-17 16:49 ` Peter Tyser
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 21/27] ppc: Remove sbc8641d board Tom Rini
2021-05-15 15:20 ` Simon Glass
2021-05-15 19:15 ` Paul Gortmaker
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 22/27] ppc: Remove MPC8315ERDB board Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 23/27] ppc: Remove MPC8323ERDB board Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 24/27] ppc: Remove MPC832XEMDS boards Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 25/27] ppc: Remove T4160RDB board Tom Rini
2021-05-21 16:10 ` Camelia Alexandra Groza (OSS)
2021-05-21 16:18 ` Tom Rini
2021-05-21 17:39 ` Tom Rini
2021-06-08 7:36 ` Priyanka Jain
2021-06-08 12:06 ` Tom Rini
2021-05-23 14:58 ` [PATCHv2 " Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 26/27] configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=y Tom Rini
2021-07-08 2:53 ` Tom Rini
2021-05-15 1:34 ` [PATCH 27/27] pci: Require DM_PCI Tom Rini
2021-07-19 12:25 ` Tom Rini
2021-07-08 2:51 ` [PATCH 01/27] pci: Remove non-DM board_pci_fixup_dev() declaration Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210515013432.12867-5-trini@konsulko.com \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.