* [PATCH 0/4] Clear some dtbs_check warnings detected by snps-dw-apb-uart.yaml
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
The Synopsys DesignWare ABP UART is commonly used. Therefore, it is meaningful
to clear the warnings detected by snps-dw-apb-uart.yaml. I fixed everything I
could. The only problem left is that some serial port nodes do not have the
property 'interrupts'. I don't know their interrupt number, so there's no way
to fix it. By the way, is there a scenario where serial ports do not need to be
interrupted? If it exists, property 'interrupts' should not be defined as required.
Zhen Lei (4):
arm64: dts: bitmain: normalize the node name of the UART devices
arm64: dts: broadcom: normalize the node name of the UART devices
arm64: dts: realtek: rtd16xx: normalize the node name of the UART
devices
arm64: dts: synaptics: normalize the node name of the UART devices
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
arch/arm64/boot/dts/synaptics/berlin4ct.dtsi | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
--
2.21.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/4] Clear some dtbs_check warnings detected by snps-dw-apb-uart.yaml
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
The Synopsys DesignWare ABP UART is commonly used. Therefore, it is meaningful
to clear the warnings detected by snps-dw-apb-uart.yaml. I fixed everything I
could. The only problem left is that some serial port nodes do not have the
property 'interrupts'. I don't know their interrupt number, so there's no way
to fix it. By the way, is there a scenario where serial ports do not need to be
interrupted? If it exists, property 'interrupts' should not be defined as required.
Zhen Lei (4):
arm64: dts: bitmain: normalize the node name of the UART devices
arm64: dts: broadcom: normalize the node name of the UART devices
arm64: dts: realtek: rtd16xx: normalize the node name of the UART
devices
arm64: dts: synaptics: normalize the node name of the UART devices
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
arch/arm64/boot/dts/synaptics/berlin4ct.dtsi | 2 +-
4 files changed, 11 insertions(+), 11 deletions(-)
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/4] arm64: dts: bitmain: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-19 14:19 ` Zhen Lei
-1 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b76057aa..22a200fb07d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -184,7 +184,7 @@
status = "disabled";
};
- uart1: serial@5801A000 {
+ uart1: serial@5801a000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@
status = "disabled";
};
- uart2: serial@5801C000 {
+ uart2: serial@5801c000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@
status = "disabled";
};
- uart3: serial@5801E000 {
+ uart3: serial@5801e000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
--
2.21.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/4] arm64: dts: bitmain: normalize the node name of the UART devices
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b76057aa..22a200fb07d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -184,7 +184,7 @@
status = "disabled";
};
- uart1: serial@5801A000 {
+ uart1: serial@5801a000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@
status = "disabled";
};
- uart2: serial@5801C000 {
+ uart2: serial@5801c000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@
status = "disabled";
};
- uart3: serial@5801E000 {
+ uart3: serial@5801e000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/4] arm64: dts: broadcom: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-19 14:19 ` Zhen Lei
-1 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2ffb2c92182a..7b04dfe67bef 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -470,7 +470,7 @@
status = "disabled";
};
- uart0: uart@100000 {
+ uart0: serial@100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- uart1: uart@110000 {
+ uart1: serial@110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -492,7 +492,7 @@
status = "disabled";
};
- uart2: uart@120000 {
+ uart2: serial@120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -503,7 +503,7 @@
status = "disabled";
};
- uart3: uart@130000 {
+ uart3: serial@130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
--
2.21.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/4] arm64: dts: broadcom: normalize the node name of the UART devices
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 2ffb2c92182a..7b04dfe67bef 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -470,7 +470,7 @@
status = "disabled";
};
- uart0: uart@100000 {
+ uart0: serial@100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
@@ -481,7 +481,7 @@
status = "disabled";
};
- uart1: uart@110000 {
+ uart1: serial@110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
@@ -492,7 +492,7 @@
status = "disabled";
};
- uart2: uart@120000 {
+ uart2: serial@120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
@@ -503,7 +503,7 @@
status = "disabled";
};
- uart3: uart@130000 {
+ uart3: serial@130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-19 14:19 ` Zhen Lei
-1 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
index afba5f04c8ec..bf4d9e917925 100644
--- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -195,7 +195,7 @@
};
&iso {
- uart0: serial0@800 {
+ uart0: serial@800 {
compatible = "snps,dw-apb-uart";
reg = <0x800 0x400>;
reg-shift = <2>;
@@ -207,7 +207,7 @@
};
&misc {
- uart1: serial1@200 {
+ uart1: serial@200 {
compatible = "snps,dw-apb-uart";
reg = <0x200 0x400>;
reg-shift = <2>;
@@ -217,7 +217,7 @@
status = "disabled";
};
- uart2: serial2@400 {
+ uart2: serial@400 {
compatible = "snps,dw-apb-uart";
reg = <0x400 0x400>;
reg-shift = <2>;
--
2.21.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
index afba5f04c8ec..bf4d9e917925 100644
--- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -195,7 +195,7 @@
};
&iso {
- uart0: serial0@800 {
+ uart0: serial@800 {
compatible = "snps,dw-apb-uart";
reg = <0x800 0x400>;
reg-shift = <2>;
@@ -207,7 +207,7 @@
};
&misc {
- uart1: serial1@200 {
+ uart1: serial@200 {
compatible = "snps,dw-apb-uart";
reg = <0x200 0x400>;
reg-shift = <2>;
@@ -217,7 +217,7 @@
status = "disabled";
};
- uart2: serial2@400 {
+ uart2: serial@400 {
compatible = "snps,dw-apb-uart";
reg = <0x400 0x400>;
reg-shift = <2>;
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/4] arm64: dts: synaptics: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-19 14:19 ` Zhen Lei
-1 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/synaptics/berlin4ct.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
index 0949acee4728..dc12350b9fc8 100644
--- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -289,7 +289,7 @@
};
};
- uart0: uart@d000 {
+ uart0: serial@d000 {
compatible = "snps,dw-apb-uart";
reg = <0xd000 0x100>;
interrupts = <8>;
--
2.21.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 4/4] arm64: dts: synaptics: normalize the node name of the UART devices
@ 2021-05-19 14:19 ` Zhen Lei
0 siblings, 0 replies; 16+ messages in thread
From: Zhen Lei @ 2021-05-19 14:19 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Andreas Färber, Jisheng Zhang, Sebastian Hesselbarth,
linux-realtek-soc, bcm-kernel-feedback-list, linux-arm-kernel,
devicetree
Cc: Zhen Lei
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
arch/arm64/boot/dts/synaptics/berlin4ct.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
index 0949acee4728..dc12350b9fc8 100644
--- a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -289,7 +289,7 @@
};
};
- uart0: uart@d000 {
+ uart0: serial@d000 {
compatible = "snps,dw-apb-uart";
reg = <0xd000 0x100>;
interrupts = <8>;
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-19 14:31 ` Andreas Färber
-1 siblings, 0 replies; 16+ messages in thread
From: Andreas Färber @ 2021-05-19 14:31 UTC (permalink / raw)
To: Zhen Lei
Cc: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
bcm-kernel-feedback-list, linux-arm-kernel, devicetree
Hi,
On 19.05.21 16:19, Zhen Lei wrote:
> Change the node name of the UART devices to match
> "^serial(@[0-9a-f,]+)*$".
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> index afba5f04c8ec..bf4d9e917925 100644
> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> @@ -195,7 +195,7 @@
> };
>
> &iso {
> - uart0: serial0@800 {
> + uart0: serial@800 {
[snip]
Ouch, shame on me for not catching this in review...
Reviewed-by: Andreas Färber <afaerber@suse.de>
Are you expecting this to go through the four maintainer trees or
centrally somehow?
Thanks,
Andreas
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
@ 2021-05-19 14:31 ` Andreas Färber
0 siblings, 0 replies; 16+ messages in thread
From: Andreas Färber @ 2021-05-19 14:31 UTC (permalink / raw)
To: Zhen Lei
Cc: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
bcm-kernel-feedback-list, linux-arm-kernel, devicetree
Hi,
On 19.05.21 16:19, Zhen Lei wrote:
> Change the node name of the UART devices to match
> "^serial(@[0-9a-f,]+)*$".
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> index afba5f04c8ec..bf4d9e917925 100644
> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> @@ -195,7 +195,7 @@
> };
>
> &iso {
> - uart0: serial0@800 {
> + uart0: serial@800 {
[snip]
Ouch, shame on me for not catching this in review...
Reviewed-by: Andreas Färber <afaerber@suse.de>
Are you expecting this to go through the four maintainer trees or
centrally somehow?
Thanks,
Andreas
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
2021-05-19 14:31 ` Andreas Färber
@ 2021-05-19 14:46 ` Leizhen (ThunderTown)
-1 siblings, 0 replies; 16+ messages in thread
From: Leizhen (ThunderTown) @ 2021-05-19 14:46 UTC (permalink / raw)
To: Andreas Färber
Cc: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
bcm-kernel-feedback-list, linux-arm-kernel, devicetree
On 2021/5/19 22:31, Andreas Färber wrote:
> Hi,
>
> On 19.05.21 16:19, Zhen Lei wrote:
>> Change the node name of the UART devices to match
>> "^serial(@[0-9a-f,]+)*$".
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> index afba5f04c8ec..bf4d9e917925 100644
>> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> @@ -195,7 +195,7 @@
>> };
>>
>> &iso {
>> - uart0: serial0@800 {
>> + uart0: serial@800 {
> [snip]
>
> Ouch, shame on me for not catching this in review...
>
> Reviewed-by: Andreas Färber <afaerber@suse.de>
>
> Are you expecting this to go through the four maintainer trees or
> centrally somehow?
It would be nice for each maintainer to add its own patch to its own tree.
Each patch is independent, I put these four patches together just for the
convenience of describing 0000-cover-letter
>
> Thanks,
> Andreas
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/4] arm64: dts: realtek: rtd16xx: normalize the node name of the UART devices
@ 2021-05-19 14:46 ` Leizhen (ThunderTown)
0 siblings, 0 replies; 16+ messages in thread
From: Leizhen (ThunderTown) @ 2021-05-19 14:46 UTC (permalink / raw)
To: Andreas Färber
Cc: Manivannan Sadhasivam, Rob Herring, Ray Jui, Scott Branden,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
bcm-kernel-feedback-list, linux-arm-kernel, devicetree
On 2021/5/19 22:31, Andreas Färber wrote:
> Hi,
>
> On 19.05.21 16:19, Zhen Lei wrote:
>> Change the node name of the UART devices to match
>> "^serial(@[0-9a-f,]+)*$".
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> index afba5f04c8ec..bf4d9e917925 100644
>> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
>> @@ -195,7 +195,7 @@
>> };
>>
>> &iso {
>> - uart0: serial0@800 {
>> + uart0: serial@800 {
> [snip]
>
> Ouch, shame on me for not catching this in review...
>
> Reviewed-by: Andreas Färber <afaerber@suse.de>
>
> Are you expecting this to go through the four maintainer trees or
> centrally somehow?
It would be nice for each maintainer to add its own patch to its own tree.
Each patch is independent, I put these four patches together just for the
convenience of describing 0000-cover-letter
>
> Thanks,
> Andreas
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/4] arm64: dts: broadcom: normalize the node name of the UART devices
2021-05-19 14:19 ` Zhen Lei
@ 2021-05-20 18:45 ` Florian Fainelli
-1 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-05-20 18:45 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Zhen Lei, Manivannan Sadhasivam,
Rob Herring, Ray Jui, Scott Branden, Andreas Färber,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
linux-arm-kernel, devicetree
On Wed, 19 May 2021 22:19:12 +0800, Zhen Lei <thunder.leizhen@huawei.com> wrote:
> Change the node name of the UART devices to match
> "^serial(@[0-9a-f,]+)*$".
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
Applied to devicetree-arm64/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/4] arm64: dts: broadcom: normalize the node name of the UART devices
@ 2021-05-20 18:45 ` Florian Fainelli
0 siblings, 0 replies; 16+ messages in thread
From: Florian Fainelli @ 2021-05-20 18:45 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Zhen Lei, Manivannan Sadhasivam,
Rob Herring, Ray Jui, Scott Branden, Andreas Färber,
Jisheng Zhang, Sebastian Hesselbarth, linux-realtek-soc,
linux-arm-kernel, devicetree
On Wed, 19 May 2021 22:19:12 +0800, Zhen Lei <thunder.leizhen@huawei.com> wrote:
> Change the node name of the UART devices to match
> "^serial(@[0-9a-f,]+)*$".
>
> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
> ---
Applied to devicetree-arm64/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2021-05-20 18:47 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-19 14:19 [PATCH 0/4] Clear some dtbs_check warnings detected by snps-dw-apb-uart.yaml Zhen Lei
2021-05-19 14:19 ` Zhen Lei
2021-05-19 14:19 ` [PATCH 1/4] arm64: dts: bitmain: normalize the node name of the UART devices Zhen Lei
2021-05-19 14:19 ` Zhen Lei
2021-05-19 14:19 ` [PATCH 2/4] arm64: dts: broadcom: " Zhen Lei
2021-05-19 14:19 ` Zhen Lei
2021-05-20 18:45 ` Florian Fainelli
2021-05-20 18:45 ` Florian Fainelli
2021-05-19 14:19 ` [PATCH 3/4] arm64: dts: realtek: rtd16xx: " Zhen Lei
2021-05-19 14:19 ` Zhen Lei
2021-05-19 14:31 ` Andreas Färber
2021-05-19 14:31 ` Andreas Färber
2021-05-19 14:46 ` Leizhen (ThunderTown)
2021-05-19 14:46 ` Leizhen (ThunderTown)
2021-05-19 14:19 ` [PATCH 4/4] arm64: dts: synaptics: " Zhen Lei
2021-05-19 14:19 ` Zhen Lei
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.