All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: x86@kernel.org, linux-kernel@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
	James Morse <james.morse@arm.com>,
	shameerali.kolothum.thodi@huawei.com,
	Jamie Iles <jamie@nuviainc.com>,
	D Scott Phillips OS <scott@os.amperecomputing.com>
Subject: [PATCH v3 18/24] x86/resctrl: Make ctrlval arrays the same size
Date: Wed, 19 May 2021 16:24:18 +0000	[thread overview]
Message-ID: <20210519162424.27654-19-james.morse@arm.com> (raw)
In-Reply-To: <20210519162424.27654-1-james.morse@arm.com>

The CODE and DATA resources report a num_closid that is half the
actual size supported by the hardware. This behaviour is visible
to user-space when CDP is enabled.
The CODE and DATA resources have their own ctrlval arrays which are half
the size of the underlying hardware because num_closid was already
adjusted. One holds the odd configurations values, the other even.

Before the CDP resources can be merged, the 'half the closids'
behaviour needs to be implemented by schemata_list_create(), but
this causes the ctrl_val[] array to be full sized.

Remove the logic from the architecture specific rdt_get_cdp_config()
setup, and add it to schemata_list_create(). Functions that
walk take num_closid directly from struct rdt_hw_resource also
have to halve num_closid as only the lower half of each array is
in use. domain_setup_ctrlval() and reset_all_ctrls() both copy
struct rdt_hw_resource's num_closid to a struct msr_param. Correct
the value here. This is temporary as a subsequent patch will merge
the all three ctrl_val[] arrays such that when CDP is in use, the
CODA/DATA layout in the array matches the hardware. reset_all_ctrls()'s
loop over the whole of ctrl_val[] is not touched as this is harmless,
and will be required as it is once the resources are merged.

Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v2:
 * Shuffled commit message,

 arch/x86/kernel/cpu/resctrl/core.c     | 10 +++++++++-
 arch/x86/kernel/cpu/resctrl/rdtgroup.c |  9 +++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index a2cbd2832d73..0d18227a366b 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -363,7 +363,7 @@ static void rdt_get_cdp_config(int level, int type)
 	struct rdt_resource *r = &rdt_resources_all[type].resctrl;
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 
-	hw_res->num_closid = hw_res_l->num_closid / 2;
+	hw_res->num_closid = hw_res_l->num_closid;
 	r->cache.cbm_len = r_l->cache.cbm_len;
 	r->default_ctrl = r_l->default_ctrl;
 	r->cache.shareable_bits = r_l->cache.shareable_bits;
@@ -549,6 +549,14 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
 
 	m.low = 0;
 	m.high = hw_res->num_closid;
+
+	/*
+	 * temporary: the array is full-size, but cat_wrmsr() still re-maps
+	 * the index.
+	 */
+	if (hw_res->conf_type != CDP_NONE)
+		m.high /= 2;
+
 	hw_res->msr_update(d, &m, r);
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 740d2d0ff4df..e8006e332d1a 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -2154,6 +2154,8 @@ static int schemata_list_create(void)
 		s->res = r;
 		s->conf_type = resctrl_to_arch_res(r)->conf_type;
 		s->num_closid = resctrl_arch_get_num_closid(r);
+		if (resctrl_arch_get_cdp_enabled(r->rid))
+			s->num_closid /= 2;
 
 		ret = snprintf(s->name, sizeof(s->name), r->name);
 		if (ret >= sizeof(s->name)) {
@@ -2366,6 +2368,13 @@ static int reset_all_ctrls(struct rdt_resource *r)
 	msr_param.low = 0;
 	msr_param.high = hw_res->num_closid;
 
+	/*
+	 * temporary: the array is full-sized, but cat_wrmsr() still re-maps
+	 * the index.
+	 */
+	if (hw_res->cdp_enabled)
+		msr_param.high /= 2;
+
 	/*
 	 * Disable resource control for this resource by setting all
 	 * CBMs in all domains to the maximum mask value. Pick one CPU
-- 
2.30.2


  parent reply	other threads:[~2021-05-19 16:26 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19 16:24 [PATCH v3 00/24] x86/resctrl: Merge the CDP resources James Morse
2021-05-19 16:24 ` [PATCH v3 01/24] x86/resctrl: Split struct rdt_resource James Morse
2021-05-19 16:24 ` [PATCH v3 02/24] x86/resctrl: Split struct rdt_domain James Morse
2021-05-19 16:24 ` [PATCH v3 03/24] x86/resctrl: Add a separate schema list for resctrl James Morse
2021-05-19 16:24 ` [PATCH v3 04/24] x86/resctrl: Pass the schema in info dir's private pointer James Morse
2021-05-19 16:24 ` [PATCH v3 05/24] x86/resctrl: Label the resources with their configuration type James Morse
2021-05-19 16:24 ` [PATCH v3 06/24] x86/resctrl: Walk the resctrl schema list instead of an arch list James Morse
2021-05-19 16:24 ` [PATCH v3 07/24] x86/resctrl: Store the effective num_closid in the schema James Morse
2021-05-19 16:24 ` [PATCH v3 08/24] x86/resctrl: Add resctrl_arch_get_num_closid() James Morse
2021-05-19 16:24 ` [PATCH v3 09/24] x86/resctrl: Pass the schema to resctrl filesystem functions James Morse
2021-05-19 16:24 ` [PATCH v3 10/24] x86/resctrl: Swizzle rdt_resource and resctrl_schema in pseudo_lock_region James Morse
2021-05-19 16:24 ` [PATCH v3 11/24] x86/resctrl: Move the schemata names into struct resctrl_schema James Morse
2021-05-19 16:24 ` [PATCH v3 12/24] x86/resctrl: Group staged configuration into a separate struct James Morse
2021-05-19 16:24 ` [PATCH v3 13/24] x86/resctrl: Allow different CODE/DATA configurations to be staged James Morse
2021-05-19 16:24 ` [PATCH v3 14/24] x86/resctrl: Rename update_domains() resctrl_arch_update_domains() James Morse
2021-05-19 16:24 ` [PATCH v3 15/24] x86/resctrl: Add a helper to read a closid's configuration James Morse
2021-05-19 16:24 ` [PATCH v3 16/24] x86/resctrl: Add a helper to read/set the CDP configuration James Morse
2021-05-19 16:24 ` [PATCH v3 17/24] x86/resctrl: Pass configuration type to resctrl_arch_get_config() James Morse
2021-05-19 16:24 ` James Morse [this message]
2021-05-19 16:24 ` [PATCH v3 19/24] x86/resctrl: Apply offset correction when config is staged James Morse
2021-05-19 16:24 ` [PATCH v3 20/24] x86/resctrl: Calculate the index from the configuration type James Morse
2021-05-19 16:24 ` [PATCH v3 21/24] x86/resctrl: Merge the ctrl_val arrays James Morse
2021-05-19 16:24 ` [PATCH v3 22/24] x86/resctrl: Remove rdt_cdp_peer_get() James Morse
2021-05-19 16:24 ` [PATCH v3 23/24] x86/resctrl: Expand resctrl_arch_update_domains()'s msr_param range James Morse
2021-05-19 16:24 ` [PATCH v3 24/24] x86/resctrl: Merge the CDP resources James Morse
2021-06-04 23:56 ` [PATCH v3 00/24] " Reinette Chatre
2021-06-11 18:04   ` James Morse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210519162424.27654-19-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=Babu.Moger@amd.com \
    --cc=bp@alien8.de \
    --cc=fenghua.yu@intel.com \
    --cc=hpa@zytor.com \
    --cc=jamie@nuviainc.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=scott@os.amperecomputing.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.