* [PATCH 4.4 01/54] mm, vmstat: drop zone->lock in /proc/pagetypeinfo
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 02/54] netfilter: x_tables: Use correct memory barriers Greg Kroah-Hartman
` (53 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Stephen Brennan, Aruna Ramakrishna, Khalid Aziz
From: Stephen Brennan <stephen.s.brennan@oracle.com>
Commit 93b3a674485f6a4b8ffff85d1682d5e8b7c51560 upstream
Commit 93b3a674485f ("mm,vmstat: reduce zone->lock holding time by
/proc/pagetypeinfo") upstream caps the number of iterations over each
free_list at 100,000, and also drops the zone->lock in between each
migrate type. Capping the iteration count alters the file contents in
some cases, which means this approach may not be suitable for stable
backports.
However, dropping zone->lock in between migrate types (and, as a result,
page orders) will not change the /proc/pagetypeinfo file contents. It
can significantly reduce the length of time spent with IRQs disabled,
which can prevent missed interrupts or soft lockups which we have
observed on systems with particularly large memory.
Thus, this commit is a modified version of the upstream one which only
drops the lock in between migrate types.
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/vmstat.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -973,6 +973,9 @@ static void pagetypeinfo_showfree_print(
list_for_each(curr, &area->free_list[mtype])
freecount++;
seq_printf(m, "%6lu ", freecount);
+ spin_unlock_irq(&zone->lock);
+ cond_resched();
+ spin_lock_irq(&zone->lock);
}
seq_putc(m, '\n');
}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 02/54] netfilter: x_tables: Use correct memory barriers.
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 01/54] mm, vmstat: drop zone->lock in /proc/pagetypeinfo Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 03/54] NFC: nci: fix memory leak in nci_allocate_device Greg Kroah-Hartman
` (52 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Tomlinson, Pablo Neira Ayuso,
Pavel Machek (CIP), Nobuhiro Iwamatsu (CIP)
From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
commit 175e476b8cdf2a4de7432583b49c871345e4f8a1 upstream.
When a new table value was assigned, it was followed by a write memory
barrier. This ensured that all writes before this point would complete
before any writes after this point. However, to determine whether the
rules are unused, the sequence counter is read. To ensure that all
writes have been done before these reads, a full memory barrier is
needed, not just a write memory barrier. The same argument applies when
incrementing the counter, before the rules are read.
Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic
reported in cc00bcaa5899 (which is still present), while still
maintaining the same speed of replacing tables.
The smb_mb() barriers potentially slow the packet path, however testing
has shown no measurable change in performance on a 4-core MIPS64
platform.
Fixes: 7f5c6d4f665b ("netfilter: get rid of atomic ops in fast path")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Ported to stable, affected barrier is added by d3d40f237480abf3268956daf18cdc56edd32834 in mainline]
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/netfilter/x_tables.h | 2 +-
net/netfilter/x_tables.c | 3 +++
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -327,7 +327,7 @@ static inline unsigned int xt_write_recs
* since addend is most likely 1
*/
__this_cpu_add(xt_recseq.sequence, addend);
- smp_wmb();
+ smp_mb();
return addend;
}
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1140,6 +1140,9 @@ xt_replace_table(struct xt_table *table,
smp_wmb();
table->private = newinfo;
+ /* make sure all cpus see new ->private value */
+ smp_mb();
+
/*
* Even though table entries have now been swapped, other CPU's
* may still be using the old entries. This is okay, because
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 03/54] NFC: nci: fix memory leak in nci_allocate_device
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 01/54] mm, vmstat: drop zone->lock in /proc/pagetypeinfo Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 02/54] netfilter: x_tables: Use correct memory barriers Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 04/54] proc: Check /proc/$pid/attr/ writes against file opener Greg Kroah-Hartman
` (51 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+19bcfc64a8df1318d1c3,
Dongliang Mu, David S. Miller
From: Dongliang Mu <mudongliangabcd@gmail.com>
commit e0652f8bb44d6294eeeac06d703185357f25d50b upstream.
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev.
Fix this by freeing hci_dev in nci_free_device.
BUG: memory leak
unreferenced object 0xffff888111ea6800 (size 1024):
comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline]
[<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline]
[<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784
[<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline]
[<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132
[<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153
[<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345
[<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
[<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740
[<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846
[<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
[<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914
[<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
[<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109
[<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164
[<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/nfc/nci_core.h | 1 +
net/nfc/nci/core.c | 1 +
net/nfc/nci/hci.c | 5 +++++
3 files changed, 7 insertions(+)
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -300,6 +300,7 @@ int nci_core_conn_create(struct nci_dev
int nci_core_conn_close(struct nci_dev *ndev, u8 conn_id);
struct nci_hci_dev *nci_hci_allocate(struct nci_dev *ndev);
+void nci_hci_deallocate(struct nci_dev *ndev);
int nci_hci_send_event(struct nci_dev *ndev, u8 gate, u8 event,
const u8 *param, size_t param_len);
int nci_hci_send_cmd(struct nci_dev *ndev, u8 gate,
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -1099,6 +1099,7 @@ EXPORT_SYMBOL(nci_allocate_device);
void nci_free_device(struct nci_dev *ndev)
{
nfc_free_device(ndev->nfc_dev);
+ nci_hci_deallocate(ndev);
kfree(ndev);
}
EXPORT_SYMBOL(nci_free_device);
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -798,3 +798,8 @@ struct nci_hci_dev *nci_hci_allocate(str
return hdev;
}
+
+void nci_hci_deallocate(struct nci_dev *ndev)
+{
+ kfree(ndev->hci_dev);
+}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 04/54] proc: Check /proc/$pid/attr/ writes against file opener
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 03/54] NFC: nci: fix memory leak in nci_allocate_device Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 05/54] net: hso: fix control-request directions Greg Kroah-Hartman
` (50 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kees Cook, Linus Torvalds
From: Kees Cook <keescook@chromium.org>
commit bfb819ea20ce8bbeeba17e1a6418bf8bda91fc28 upstream.
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/proc/base.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2413,6 +2413,10 @@ static ssize_t proc_pid_attr_write(struc
ssize_t length;
struct task_struct *task = get_proc_task(inode);
+ /* A task may only write when it was the opener. */
+ if (file->f_cred != current_real_cred())
+ return -EPERM;
+
length = -ESRCH;
if (!task)
goto out_no_task;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 05/54] net: hso: fix control-request directions
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 04/54] proc: Check /proc/$pid/attr/ writes against file opener Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 06/54] mac80211: assure all fragments are encrypted Greg Kroah-Hartman
` (49 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, David S. Miller
From: Johan Hovold <johan@kernel.org>
commit 1a6e9a9c68c1f183872e4bcc947382111c2e04eb upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/hso.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1710,7 +1710,7 @@ static int hso_serial_tiocmset(struct tt
spin_unlock_irqrestore(&serial->serial_lock, flags);
return usb_control_msg(serial->parent->usb,
- usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
+ usb_sndctrlpipe(serial->parent->usb, 0), 0x22,
0x21, val, if_num, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
@@ -2461,7 +2461,7 @@ static int hso_rfkill_set_block(void *da
if (hso_dev->usb_gone)
rv = 0;
else
- rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
+ rv = usb_control_msg(hso_dev->usb, usb_sndctrlpipe(hso_dev->usb, 0),
enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
mutex_unlock(&hso_dev->mutex);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 06/54] mac80211: assure all fragments are encrypted
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 05/54] net: hso: fix control-request directions Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 07/54] mac80211: prevent mixed key and fragment cache attacks Greg Kroah-Hartman
` (48 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit 965a7d72e798eb7af0aa67210e37cf7ecd1c9cad upstream.
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c262315950b3eac491397@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1807,6 +1807,16 @@ ieee80211_reassemble_find(struct ieee802
return NULL;
}
+static bool requires_sequential_pn(struct ieee80211_rx_data *rx, __le16 fc)
+{
+ return rx->key &&
+ (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
+ ieee80211_has_protected(fc);
+}
+
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
{
@@ -1852,12 +1862,7 @@ ieee80211_rx_h_defragment(struct ieee802
/* This is the first fragment of a new frame. */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->seqno_idx, &(rx->skb));
- if (rx->key &&
- (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
- ieee80211_has_protected(fc)) {
+ if (requires_sequential_pn(rx, fc)) {
int queue = rx->security_idx;
/* Store CCMP/GCMP PN so that we can verify that the
@@ -1899,11 +1904,7 @@ ieee80211_rx_h_defragment(struct ieee802
u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
int queue;
- if (!rx->key ||
- (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256 &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP_256))
+ if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 07/54] mac80211: prevent mixed key and fragment cache attacks
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 06/54] mac80211: assure all fragments are encrypted Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 08/54] dm snapshot: properly fix a crash when an origin has no snapshots Greg Kroah-Hartman
` (47 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit 94034c40ab4a3fcf581fbc7f8fdf4e29943c4a24 upstream.
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/key.c | 7 +++++++
net/mac80211/key.h | 2 ++
net/mac80211/rx.c | 6 ++++++
4 files changed, 16 insertions(+)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -94,6 +94,7 @@ struct ieee80211_fragment_entry {
u8 rx_queue;
bool check_sequential_pn; /* needed for CCMP/GCMP */
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
+ unsigned int key_color;
};
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -645,6 +645,7 @@ int ieee80211_key_link(struct ieee80211_
struct ieee80211_sub_if_data *sdata,
struct sta_info *sta)
{
+ static atomic_t key_color = ATOMIC_INIT(0);
struct ieee80211_local *local = sdata->local;
struct ieee80211_key *old_key;
int idx = key->conf.keyidx;
@@ -680,6 +681,12 @@ int ieee80211_key_link(struct ieee80211_
key->sdata = sdata;
key->sta = sta;
+ /*
+ * Assign a unique ID to every key so we can easily prevent mixed
+ * key and fragment cache attacks.
+ */
+ key->color = atomic_inc_return(&key_color);
+
increment_tailroom_need_count(sdata);
ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -123,6 +123,8 @@ struct ieee80211_key {
} debugfs;
#endif
+ unsigned int color;
+
/*
* key config, must be last because it contains key
* material as variable length member
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1869,6 +1869,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
IEEE80211_CCMP_PN_LEN);
@@ -1906,6 +1907,11 @@ ieee80211_rx_h_defragment(struct ieee802
if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
+
+ /* Prevent mixed key and fragment cache attacks */
+ if (entry->key_color != rx->key->color)
+ return RX_DROP_UNUSABLE;
+
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
pn[i]++;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 08/54] dm snapshot: properly fix a crash when an origin has no snapshots
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 07/54] mac80211: prevent mixed key and fragment cache attacks Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 09/54] kgdb: fix gcc-11 warnings harder Greg Kroah-Hartman
` (46 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 7e768532b2396bcb7fbf6f82384b85c0f1d2f197 upstream.
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-snap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -789,7 +789,7 @@ static int dm_add_exception(void *contex
static uint32_t __minimum_chunk_size(struct origin *o)
{
struct dm_snapshot *snap;
- unsigned chunk_size = 0;
+ unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
if (o)
list_for_each_entry(snap, &o->snapshots, list)
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 09/54] kgdb: fix gcc-11 warnings harder
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 08/54] dm snapshot: properly fix a crash when an origin has no snapshots Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 10/54] misc/uss720: fix memory leak in uss720_probe Greg Kroah-Hartman
` (45 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Daniel Thompson, Jason Wessel
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bda7d3ab06f19c02dcef61fefcb9dd954dfd5e4f upstream.
40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: https://lore.kernel.org/r/20210520130839.51987-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/kgdbts.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -110,8 +110,9 @@
printk(KERN_INFO a); \
} while (0)
#define v2printk(a...) do { \
- if (verbose > 1) \
+ if (verbose > 1) { \
printk(KERN_INFO a); \
+ } \
touch_nmi_watchdog(); \
} while (0)
#define eprintk(a...) do { \
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 10/54] misc/uss720: fix memory leak in uss720_probe
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 09/54] kgdb: fix gcc-11 warnings harder Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 11/54] mei: request autosuspend after sending rx flow control Greg Kroah-Hartman
` (44 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+636c58f40a86b4a879e7, Dongliang Mu
From: Dongliang Mu <mudongliangabcd@gmail.com>
commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/uss720.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -753,6 +753,7 @@ static int uss720_probe(struct usb_inter
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
+ usb_put_dev(usbdev);
return 0;
probe_abort:
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 11/54] mei: request autosuspend after sending rx flow control
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 10/54] misc/uss720: fix memory leak in uss720_probe Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 12/54] staging: iio: cdc: ad7746: avoid overwrite of num_channels Greg Kroah-Hartman
` (43 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Usyskin, Tomas Winkler
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit bbf0a94744edfeee298e4a9ab6fd694d639a5cdf upstream.
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/interrupt.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -220,6 +220,9 @@ static int mei_cl_irq_read(struct mei_cl
return ret;
}
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_request_autosuspend(dev->dev);
+
list_move_tail(&cb->list, &cl->rd_pending);
return 0;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 12/54] staging: iio: cdc: ad7746: avoid overwrite of num_channels
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 11/54] mei: request autosuspend after sending rx flow control Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 13/54] iio: adc: ad7793: Add missing error code in ad7793_setup() Greg Kroah-Hartman
` (42 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lucas Stankus, Jonathan Cameron, Stable
From: Lucas Stankus <lucas.p.stankus@gmail.com>
commit 04f5b9f539ce314f758d919a14dc7a669f3b7838 upstream.
AD7745 devices don't have the CIN2 pins and therefore can't handle related
channels. Forcing the number of AD7746 channels may lead to enabling more
channels than what the hardware actually supports.
Avoid num_channels being overwritten after first assignment.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Fixes: 83e416f458d53 ("staging: iio: adc: Replace, rewrite ad7745 from scratch.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/iio/cdc/ad7746.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -714,7 +714,6 @@ static int ad7746_probe(struct i2c_clien
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
else
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels) - 2;
- indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
if (pdata) {
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 13/54] iio: adc: ad7793: Add missing error code in ad7793_setup()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 12/54] staging: iio: cdc: ad7746: avoid overwrite of num_channels Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction Greg Kroah-Hartman
` (41 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, YueHaibing, Stable, Jonathan Cameron
From: YueHaibing <yuehaibing@huawei.com>
commit 4ed243b1da169bcbc1ec5507867e56250c5f1ff9 upstream.
Set error code while device ID query failed.
Fixes: 88bc30548aae ("IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7793.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -279,6 +279,7 @@ static int ad7793_setup(struct iio_dev *
id &= AD7793_ID_MASK;
if (id != st->chip_info->id) {
+ ret = -ENODEV;
dev_err(&st->sd.spi->dev, "device ID query failed\n");
goto out;
}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 13/54] iio: adc: ad7793: Add missing error code in ad7793_setup() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 15/54] serial: rp2: use request_firmware instead of request_firmware_nowait Greg Kroah-Hartman
` (40 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 746e4acf87bcacf1406e05ef24a0b7139147c63e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: stable@vger.kernel.org # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/trancevibrator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -74,9 +74,9 @@ static ssize_t set_speed(struct device *
/* Set speed */
retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0),
0x01, /* vendor request: set speed */
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
tv->speed, /* speed value */
- 0, NULL, 0, USB_CTRL_GET_TIMEOUT);
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval) {
tv->speed = old;
dev_dbg(&tv->udev->dev, "retval = %d\n", retval);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 15/54] serial: rp2: use request_firmware instead of request_firmware_nowait
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 14/54] USB: trancevibrator: fix control-request direction Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 16/54] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 Greg Kroah-Hartman
` (39 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zheyu Ma
From: Zheyu Ma <zheyuma97@gmail.com>
commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
This report reveals it:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
1 file changed, 17 insertions(+), 35 deletions(-)
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -198,7 +198,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -667,17 +666,10 @@ static void rp2_remove_ports(struct rp2_
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -723,23 +715,13 @@ static void rp2_fw_cb(const struct firmw
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -750,7 +732,6 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -783,21 +764,23 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
card->ports = ports;
- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
return 0;
}
@@ -806,7 +789,6 @@ static void rp2_remove(struct pci_dev *p
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 16/54] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 15/54] serial: rp2: use request_firmware instead of request_firmware_nowait Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 17/54] USB: serial: ftdi_sio: add IDs for IDS GmbH Products Greg Kroah-Hartman
` (38 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
Add support for the following Telit LE910-S1 compositions:
0x7010: rndis, tty, tty, tty
0x7011: ecm, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210428072634.5091-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1222,6 +1222,10 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 17/54] USB: serial: ftdi_sio: add IDs for IDS GmbH Products
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 16/54] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 18/54] USB: serial: pl2303: add device id for ADLINK ND-6530 GC Greg Kroah-Hartman
` (37 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dominik Andreas Schorpp,
Juergen Borleis, Johan Hovold
From: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
and CM31A (LoRaWAN Modem).
Signed-off-by: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 3 +++
drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
2 files changed, 10 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1029,6 +1029,9 @@ static const struct usb_device_id id_tab
/* Sienna devices */
{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+ /* IDS GmbH devices */
+ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
+ { USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1567,6 +1567,13 @@
#define UNJO_ISODEBUG_V1_PID 0x150D
/*
+ * IDS GmbH
+ */
+#define IDS_VID 0x2CAF
+#define IDS_SI31A_PID 0x13A2
+#define IDS_CM31A_PID 0x13A3
+
+/*
* U-Blox products (http://www.u-blox.com).
*/
#define UBLOX_VID 0x1546
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 18/54] USB: serial: pl2303: add device id for ADLINK ND-6530 GC
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 17/54] USB: serial: ftdi_sio: add IDs for IDS GmbH Products Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 19/54] net: usb: fix memory leak in smsc75xx_bind Greg Kroah-Hartman
` (36 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zolton Jheng, Johan Hovold
From: Zolton Jheng <s6668c2t@gmail.com>
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.
Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -102,6 +102,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -156,6 +156,7 @@
/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
+#define ADLINK_ND6530GC_PRODUCT_ID 0x653a
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 19/54] net: usb: fix memory leak in smsc75xx_bind
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 18/54] USB: serial: pl2303: add device id for ADLINK ND-6530 GC Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 20/54] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
` (35 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Pavel Skripkin,
David S. Miller, syzbot+b558506ba8165425fee2
From: Pavel Skripkin <paskripkin@gmail.com>
commit 46a8b29c6306d8bbfd92b614ef65a47c900d8e70 upstream.
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/smsc75xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1485,7 +1485,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_wait_ready(dev, 0);
if (ret < 0) {
netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
- return ret;
+ goto err;
}
smsc75xx_init_mac_address(dev);
@@ -1494,7 +1494,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_reset(dev);
if (ret < 0) {
netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
- return ret;
+ goto err;
}
dev->net->netdev_ops = &smsc75xx_netdev_ops;
@@ -1503,6 +1503,10 @@ static int smsc75xx_bind(struct usbnet *
dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
return 0;
+
+err:
+ kfree(pdata);
+ return ret;
}
static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 20/54] spi: Fix use-after-free with devm_spi_alloc_*
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 19/54] net: usb: fix memory leak in smsc75xx_bind Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 21/54] spi: spi-sh: Fix use-after-free on unbind Greg Kroah-Hartman
` (34 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, William A. Kennington III,
Mark Brown, Lukas Wunner
From: William A. Kennington III <wak@google.com>
commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 upstream.
We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98)
[<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24)
r4:b6700140
[<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40)
[<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4)
r5:b6700180 r4:b6700100
[<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60)
r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec)
r5:b117ad94 r4:b163dc10
[<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0)
r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8)
Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.
Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III <wak@google.com>
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to v4.4.270]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi.c | 9 ++-------
include/linux/spi/spi.h | 3 +++
2 files changed, 5 insertions(+), 7 deletions(-)
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1762,6 +1762,7 @@ struct spi_master *devm_spi_alloc_master
master = spi_alloc_master(dev, size);
if (master) {
+ master->devm_allocated = true;
*ptr = master;
devres_add(dev, ptr);
} else {
@@ -1951,11 +1952,6 @@ int devm_spi_register_master(struct devi
}
EXPORT_SYMBOL_GPL(devm_spi_register_master);
-static int devm_spi_match_master(struct device *dev, void *res, void *master)
-{
- return *(struct spi_master **)res == master;
-}
-
static int __unregister(struct device *dev, void *null)
{
spi_unregister_device(to_spi_device(dev));
@@ -1994,8 +1990,7 @@ void spi_unregister_master(struct spi_ma
/* Release the last reference on the master if its driver
* has not yet been converted to devm_spi_alloc_master().
*/
- if (!devres_find(master->dev.parent, devm_spi_release_master,
- devm_spi_match_master, master))
+ if (!master->devm_allocated)
put_device(&master->dev);
if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -425,6 +425,9 @@ struct spi_master {
#define SPI_MASTER_MUST_RX BIT(3) /* requires rx */
#define SPI_MASTER_MUST_TX BIT(4) /* requires tx */
+ /* flag indicating this is a non-devres managed controller */
+ bool devm_allocated;
+
/* lock and mutex for SPI bus locking */
spinlock_t bus_lock_spinlock;
struct mutex bus_lock_mutex;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 21/54] spi: spi-sh: Fix use-after-free on unbind
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 20/54] spi: Fix use-after-free with devm_spi_alloc_* Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 22/54] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails Greg Kroah-Hartman
` (33 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Axel Lin, Mark Brown
From: Lukas Wunner <lukas@wunner.de>
commit e77df3eca12be4b17f13cf9f215cff248c57d98f upstream.
spi_sh_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: 680c1305e259 ("spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v3.0+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v3.0+
Cc: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/6d97628b536baf01d5e3e39db61108f84d44c8b2.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to v4.4.270]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi-sh.c | 14 ++++----------
1 file changed, 4 insertions(+), 10 deletions(-)
--- a/drivers/spi/spi-sh.c
+++ b/drivers/spi/spi-sh.c
@@ -451,7 +451,7 @@ static int spi_sh_probe(struct platform_
return -ENODEV;
}
- master = spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(struct spi_sh_data));
if (master == NULL) {
dev_err(&pdev->dev, "spi_alloc_master error.\n");
return -ENOMEM;
@@ -469,16 +469,14 @@ static int spi_sh_probe(struct platform_
break;
default:
dev_err(&pdev->dev, "No support width\n");
- ret = -ENODEV;
- goto error1;
+ return -ENODEV;
}
ss->irq = irq;
ss->master = master;
ss->addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (ss->addr == NULL) {
dev_err(&pdev->dev, "ioremap error.\n");
- ret = -ENOMEM;
- goto error1;
+ return -ENOMEM;
}
INIT_LIST_HEAD(&ss->queue);
spin_lock_init(&ss->lock);
@@ -488,8 +486,7 @@ static int spi_sh_probe(struct platform_
dev_name(master->dev.parent));
if (ss->workqueue == NULL) {
dev_err(&pdev->dev, "create workqueue error\n");
- ret = -EBUSY;
- goto error1;
+ return -EBUSY;
}
ret = request_irq(irq, spi_sh_irq, 0, "spi_sh", ss);
@@ -516,9 +513,6 @@ static int spi_sh_probe(struct platform_
free_irq(irq, ss);
error2:
destroy_workqueue(ss->workqueue);
- error1:
- spi_master_put(master);
-
return ret;
}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 22/54] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 21/54] spi: spi-sh: Fix use-after-free on unbind Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 23/54] NFS: fix an incorrect limit in filelayout_decode_layout() Greg Kroah-Hartman
` (32 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Marcel Holtmann
From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
commit 8da3a0b87f4f1c3a3bbc4bfb78cf68476e97d183 upstream.
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/cmtp/core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -392,6 +392,11 @@ int cmtp_add_connection(struct cmtp_conn
if (!(session->flags & BIT(CMTP_LOOPBACK))) {
err = cmtp_attach_device(session);
if (err < 0) {
+ /* Caller will call fput in case of failure, and so
+ * will cmtp_session kthread.
+ */
+ get_file(session->sock->file);
+
atomic_inc(&session->terminate);
wake_up_interruptible(sk_sleep(session->sock->sk));
up_write(&cmtp_session_sem);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 23/54] NFS: fix an incorrect limit in filelayout_decode_layout()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 22/54] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 24/54] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce() Greg Kroah-Hartman
` (31 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Trond Myklebust
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 769b01ea68b6c49dc3cde6adf7e53927dacbd3a8 upstream.
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left.
Fixes: 16b374ca439f ("NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/filelayout/filelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -716,7 +716,7 @@ filelayout_decode_layout(struct pnfs_lay
if (unlikely(!p))
goto out_err;
fl->fh_array[i]->size = be32_to_cpup(p++);
- if (sizeof(struct nfs_fh) < fl->fh_array[i]->size) {
+ if (fl->fh_array[i]->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS: Too big fh %d received %d\n",
i, fl->fh_array[i]->size);
goto out_err;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 24/54] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 23/54] NFS: fix an incorrect limit in filelayout_decode_layout() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 25/54] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config Greg Kroah-Hartman
` (30 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trond Myklebust
From: Trond Myklebust <trond.myklebust@hammerspace.com>
commit 0d0ea309357dea0d85a82815f02157eb7fcda39f upstream.
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/pagelist.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -993,17 +993,16 @@ static void nfs_pageio_doio(struct nfs_p
{
struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
-
if (!list_empty(&mirror->pg_list)) {
int error = desc->pg_ops->pg_doio(desc);
if (error < 0)
desc->pg_error = error;
- else
+ if (list_empty(&mirror->pg_list)) {
mirror->pg_bytes_written += mirror->pg_count;
- }
- if (list_empty(&mirror->pg_list)) {
- mirror->pg_count = 0;
- mirror->pg_base = 0;
+ mirror->pg_count = 0;
+ mirror->pg_base = 0;
+ mirror->pg_recoalesce = 0;
+ }
}
}
@@ -1089,7 +1088,6 @@ static int nfs_do_recoalesce(struct nfs_
do {
list_splice_init(&mirror->pg_list, &head);
- mirror->pg_bytes_written -= mirror->pg_count;
mirror->pg_count = 0;
mirror->pg_base = 0;
mirror->pg_recoalesce = 0;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 25/54] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 24/54] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 26/54] net/mlx4: Fix EEPROM dump support Greg Kroah-Hartman
` (29 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zhang Xiaoxu, Trond Myklebust
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
commit e67afa7ee4a59584d7253e45d7f63b9528819a13 upstream.
Since commit bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.
This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.
Fixes: bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/nfs4file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -168,7 +168,7 @@ static loff_t nfs4_file_llseek(struct fi
case SEEK_HOLE:
case SEEK_DATA:
ret = nfs42_proc_llseek(filep, offset, whence);
- if (ret != -ENOTSUPP)
+ if (ret != -EOPNOTSUPP)
return ret;
default:
return nfs_file_llseek(filep, offset, whence);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 26/54] net/mlx4: Fix EEPROM dump support
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 25/54] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 27/54] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" Greg Kroah-Hartman
` (28 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladyslav Tarasiuk, Tariq Toukan,
David S. Miller
From: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
commit db825feefc6868896fed5e361787ba3bee2fd906 upstream.
Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page
number correctly. For SFP set the following params:
- I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51.
- Page number is zero.
- Offset is 0-255.
At the same time, QSFP* parameters are different:
- I2C address is always 0x50.
- Page number is not limited to zero.
- Offset is 0-255 for page zero and 128-255 for others.
To set parameters accordingly to cable used, implement function to query
module ID and implement respective helper functions to set parameters
correctly.
Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4
drivers/net/ethernet/mellanox/mlx4/port.c | 107 +++++++++++++++++++++++-
2 files changed, 104 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1907,8 +1907,6 @@ static int mlx4_en_set_tunable(struct ne
return ret;
}
-#define MLX4_EEPROM_PAGE_LEN 256
-
static int mlx4_en_get_module_info(struct net_device *dev,
struct ethtool_modinfo *modinfo)
{
@@ -1943,7 +1941,7 @@ static int mlx4_en_get_module_info(struc
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
- modinfo->eeprom_len = MLX4_EEPROM_PAGE_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
break;
default:
return -ENOSYS;
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -1283,6 +1283,7 @@ EXPORT_SYMBOL(mlx4_get_roce_gid_from_sla
#define I2C_ADDR_LOW 0x50
#define I2C_ADDR_HIGH 0x51
#define I2C_PAGE_SIZE 256
+#define I2C_HIGH_PAGE_SIZE 128
/* Module Info Data */
struct mlx4_cable_info {
@@ -1336,6 +1337,88 @@ static inline const char *cable_info_mad
return "Unknown Error";
}
+static int mlx4_get_module_id(struct mlx4_dev *dev, u8 port, u8 *module_id)
+{
+ struct mlx4_cmd_mailbox *inbox, *outbox;
+ struct mlx4_mad_ifc *inmad, *outmad;
+ struct mlx4_cable_info *cable_info;
+ int ret;
+
+ inbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inbox))
+ return PTR_ERR(inbox);
+
+ outbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outbox)) {
+ mlx4_free_cmd_mailbox(dev, inbox);
+ return PTR_ERR(outbox);
+ }
+
+ inmad = (struct mlx4_mad_ifc *)(inbox->buf);
+ outmad = (struct mlx4_mad_ifc *)(outbox->buf);
+
+ inmad->method = 0x1; /* Get */
+ inmad->class_version = 0x1;
+ inmad->mgmt_class = 0x1;
+ inmad->base_version = 0x1;
+ inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
+
+ cable_info = (struct mlx4_cable_info *)inmad->data;
+ cable_info->dev_mem_address = 0;
+ cable_info->page_num = 0;
+ cable_info->i2c_addr = I2C_ADDR_LOW;
+ cable_info->size = cpu_to_be16(1);
+
+ ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
+ MLX4_CMD_NATIVE);
+ if (ret)
+ goto out;
+
+ if (be16_to_cpu(outmad->status)) {
+ /* Mad returned with bad status */
+ ret = be16_to_cpu(outmad->status);
+ mlx4_warn(dev,
+ "MLX4_CMD_MAD_IFC Get Module ID attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n",
+ 0xFF60, port, I2C_ADDR_LOW, 0, 1, ret,
+ cable_info_mad_err_str(ret));
+ ret = -ret;
+ goto out;
+ }
+ cable_info = (struct mlx4_cable_info *)outmad->data;
+ *module_id = cable_info->data[0];
+out:
+ mlx4_free_cmd_mailbox(dev, inbox);
+ mlx4_free_cmd_mailbox(dev, outbox);
+ return ret;
+}
+
+static void mlx4_sfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ *i2c_addr = I2C_ADDR_LOW;
+ *page_num = 0;
+
+ if (*offset < I2C_PAGE_SIZE)
+ return;
+
+ *i2c_addr = I2C_ADDR_HIGH;
+ *offset -= I2C_PAGE_SIZE;
+}
+
+static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ /* Offsets 0-255 belong to page 0.
+ * Offsets 256-639 belong to pages 01, 02, 03.
+ * For example, offset 400 is page 02: 1 + (400 - 256) / 128 = 2
+ */
+ if (*offset < I2C_PAGE_SIZE)
+ *page_num = 0;
+ else
+ *page_num = 1 + (*offset - I2C_PAGE_SIZE) / I2C_HIGH_PAGE_SIZE;
+ *i2c_addr = I2C_ADDR_LOW;
+ *offset -= *page_num * I2C_HIGH_PAGE_SIZE;
+}
+
/**
* mlx4_get_module_info - Read cable module eeprom data
* @dev: mlx4_dev.
@@ -1355,12 +1438,30 @@ int mlx4_get_module_info(struct mlx4_dev
struct mlx4_cmd_mailbox *inbox, *outbox;
struct mlx4_mad_ifc *inmad, *outmad;
struct mlx4_cable_info *cable_info;
- u16 i2c_addr;
+ u8 module_id, i2c_addr, page_num;
int ret;
if (size > MODULE_INFO_MAX_READ)
size = MODULE_INFO_MAX_READ;
+ ret = mlx4_get_module_id(dev, port, &module_id);
+ if (ret)
+ return ret;
+
+ switch (module_id) {
+ case MLX4_MODULE_ID_SFP:
+ mlx4_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ case MLX4_MODULE_ID_QSFP:
+ case MLX4_MODULE_ID_QSFP_PLUS:
+ case MLX4_MODULE_ID_QSFP28:
+ mlx4_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ default:
+ mlx4_err(dev, "Module ID not recognized: %#x\n", module_id);
+ return -EINVAL;
+ }
+
inbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(inbox))
return PTR_ERR(inbox);
@@ -1386,11 +1487,9 @@ int mlx4_get_module_info(struct mlx4_dev
*/
size -= offset + size - I2C_PAGE_SIZE;
- i2c_addr = I2C_ADDR_LOW;
-
cable_info = (struct mlx4_cable_info *)inmad->data;
cable_info->dev_mem_address = cpu_to_be16(offset);
- cable_info->page_num = 0;
+ cable_info->page_num = page_num;
cable_info->i2c_addr = i2c_addr;
cable_info->size = cpu_to_be16(size);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 27/54] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 26/54] net/mlx4: Fix EEPROM dump support Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 28/54] tipc: skb_linearize the head skb when reassembling msgs Greg Kroah-Hartman
` (27 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jon Maloy, Tung Nguyen, Hoang Le,
David S. Miller
From: Hoang Le <hoang.h.le@dektech.com.au>
commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.
This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.
Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/socket.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -763,7 +763,10 @@ void tipc_sk_mcast_rcv(struct net *net,
spin_lock_bh(&inputq->lock);
if (skb_peek(arrvq) == skb) {
skb_queue_splice_tail_init(&tmpq, inputq);
- __skb_dequeue(arrvq);
+ /* Decrease the skb's refcnt as increasing in the
+ * function tipc_skb_peek
+ */
+ kfree_skb(__skb_dequeue(arrvq));
}
spin_unlock_bh(&inputq->lock);
__skb_queue_purge(&tmpq);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 28/54] tipc: skb_linearize the head skb when reassembling msgs
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 27/54] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 29/54] i2c: s3c2410: fix possible NULL pointer deref on read message after write Greg Kroah-Hartman
` (26 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Li Shuang, Xin Long, Jon Maloy,
David S. Miller
From: Xin Long <lucien.xin@gmail.com>
commit b7df21cf1b79ab7026f545e7bf837bd5750ac026 upstream.
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/msg.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -139,18 +139,13 @@ int tipc_buf_append(struct sk_buff **hea
if (unlikely(head))
goto err;
*buf = NULL;
+ if (skb_has_frag_list(frag) && __skb_linearize(frag))
+ goto err;
frag = skb_unshare(frag, GFP_ATOMIC);
if (unlikely(!frag))
goto err;
head = *headbuf = frag;
TIPC_SKB_CB(head)->tail = NULL;
- if (skb_is_nonlinear(head)) {
- skb_walk_frags(head, tail) {
- TIPC_SKB_CB(head)->tail = tail;
- }
- } else {
- skb_frag_list_init(head);
- }
return 0;
}
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 29/54] i2c: s3c2410: fix possible NULL pointer deref on read message after write
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 28/54] tipc: skb_linearize the head skb when reassembling msgs Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 30/54] i2c: i801: Dont generate an interrupt on bus reset Greg Kroah-Hartman
` (25 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Wolfram Sang
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
commit 24990423267ec283b9d86f07f362b753eb9b0ed5 upstream.
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-s3c2410.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -499,8 +499,10 @@ static int i2c_s3c_irq_nextbyte(struct s
/* cannot do this, the controller
* forces us to send a new START
* when we change direction */
-
+ dev_dbg(i2c->dev,
+ "missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
+ break;
}
goto retry_write;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 30/54] i2c: i801: Dont generate an interrupt on bus reset
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 29/54] i2c: s3c2410: fix possible NULL pointer deref on read message after write Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 31/54] platform/x86: hp_accel: Avoid invoking _INI to speed up resume Greg Kroah-Hartman
` (24 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+b4d3fd1dfd53e90afd79,
Jean Delvare, Andy Shevchenko, Jarkko Nikula, Wolfram Sang
From: Jean Delvare <jdelvare@suse.de>
commit e4d8716c3dcec47f1557024add24e1f3c09eb24b upstream.
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-i801.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -327,11 +327,9 @@ static int i801_check_post(struct i801_p
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
- SMBHSTCNT(priv));
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
- SMBHSTCNT(priv));
+ outb_p(0, SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 31/54] platform/x86: hp_accel: Avoid invoking _INI to speed up resume
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 30/54] i2c: i801: Dont generate an interrupt on bus reset Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 32/54] net: fujitsu: fix potential null-ptr-deref Greg Kroah-Hartman
` (23 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Éric Piel,
Hans de Goede, Sasha Levin
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Éric Piel <eric.piel@trempplin-utc.net>
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/lis3lv02d/lis3lv02d.h | 1 +
drivers/platform/x86/hp_accel.c | 22 +++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index c439c827eea8..0ef759671b54 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -284,6 +284,7 @@ struct lis3lv02d {
int regs_size;
u8 *reg_cache;
bool regs_stored;
+ bool init_required;
u8 odr_mask; /* ODR bit mask */
u8 whoami; /* indicates measurement precision */
s16 (*read_data) (struct lis3lv02d *lis3, int reg);
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 10ce6cba4455..a06262e91a93 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -101,6 +101,9 @@ MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
static int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
{
struct acpi_device *dev = lis3->bus_priv;
+ if (!lis3->init_required)
+ return 0;
+
if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI,
NULL, NULL) != AE_OK)
return -EINVAL;
@@ -361,6 +364,7 @@ static int lis3lv02d_add(struct acpi_device *device)
}
/* call the core layer do its init */
+ lis3_dev.init_required = true;
ret = lis3lv02d_init_device(&lis3_dev);
if (ret)
return ret;
@@ -408,11 +412,27 @@ static int lis3lv02d_suspend(struct device *dev)
static int lis3lv02d_resume(struct device *dev)
{
+ lis3_dev.init_required = false;
+ lis3lv02d_poweron(&lis3_dev);
+ return 0;
+}
+
+static int lis3lv02d_restore(struct device *dev)
+{
+ lis3_dev.init_required = true;
lis3lv02d_poweron(&lis3_dev);
return 0;
}
-static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume);
+static const struct dev_pm_ops hp_accel_pm = {
+ .suspend = lis3lv02d_suspend,
+ .resume = lis3lv02d_resume,
+ .freeze = lis3lv02d_suspend,
+ .thaw = lis3lv02d_resume,
+ .poweroff = lis3lv02d_suspend,
+ .restore = lis3lv02d_restore,
+};
+
#define HP_ACCEL_PM (&hp_accel_pm)
#else
#define HP_ACCEL_PM NULL
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 32/54] net: fujitsu: fix potential null-ptr-deref
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 31/54] platform/x86: hp_accel: Avoid invoking _INI to speed up resume Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.4 33/54] net: caif: remove BUG_ON(dev == NULL) in caif_xmit Greg Kroah-Hartman
` (22 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Dominik Brodowski,
Anirudh Rayabharam, Sasha Levin
From: Anirudh Rayabharam <mail@anirudhrb.com>
[ Upstream commit 52202be1cd996cde6e8969a128dc27ee45a7cb5e ]
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure.
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index a7139f588ad2..fb1a9bd24660 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -548,6 +548,11 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+ if (!base) {
+ pcmcia_release_window(link, link->resource[2]);
+ return -1;
+ }
+
pcmcia_map_mem_page(link, link->resource[2], 0);
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 33/54] net: caif: remove BUG_ON(dev == NULL) in caif_xmit
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 32/54] net: fujitsu: fix potential null-ptr-deref Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 34/54] char: hpet: add checks after calling ioremap Greg Kroah-Hartman
` (21 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Du Cheng, Sasha Levin
From: Du Cheng <ducheng2@gmail.com>
[ Upstream commit 65a67792e3416f7c5d7daa47d99334cbb19a7449 ]
The condition of dev == NULL is impossible in caif_xmit(), hence it is
for the removal.
Explanation:
The static caif_xmit() is only called upon via a function pointer
`ndo_start_xmit` defined in include/linux/netdevice.h:
```
struct net_device_ops {
...
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
...
}
```
The exhausive list of call points are:
```
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c
dev->netdev_ops->ndo_start_xmit(skb, dev);
^ ^
drivers/infiniband/ulp/opa_vnic/opa_vnic_netdev.c
struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev);
^ ^
return adapter->rn_ops->ndo_start_xmit(skb, netdev); // adapter would crash first
^ ^
drivers/usb/gadget/function/f_ncm.c
ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev);
^ ^
include/linux/netdevice.h
static inline netdev_tx_t __netdev_start_xmit(...
{
return ops->ndo_start_xmit(skb, dev);
^
}
const struct net_device_ops *ops = dev->netdev_ops;
^
rc = __netdev_start_xmit(ops, skb, dev, more);
^
```
In each of the enumerated scenarios, it is impossible for the NULL-valued dev to
reach the caif_xmit() without crashing the kernel earlier, therefore `BUG_ON(dev ==
NULL)` is rather useless, hence the removal.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-20-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/caif/caif_serial.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index c2dea4916e5d..32834dad0b83 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -281,7 +281,6 @@ static int caif_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ser_device *ser;
- BUG_ON(dev == NULL);
ser = netdev_priv(dev);
/* Send flow off once, on high water mark */
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 34/54] char: hpet: add checks after calling ioremap
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.4 33/54] net: caif: remove BUG_ON(dev == NULL) in caif_xmit Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
` (20 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tom Seewald, Sasha Levin
From: Tom Seewald <tseewald@gmail.com>
[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ]
The function hpet_resources() calls ioremap() two times, but in both
cases it does not check if ioremap() returned a null pointer. Fix this
by adding null pointer checks and returning an appropriate error.
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hpet.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 5b38d7a8202a..eb205f9173f4 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -976,6 +976,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (ACPI_SUCCESS(status)) {
hdp->hd_phys_address = addr.address.minimum;
hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
@@ -989,6 +991,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
hdp->hd_phys_address = fixmem32->address;
hdp->hd_address = ioremap(fixmem32->address,
HPET_RANGE_SIZE);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 34/54] char: hpet: add checks after calling ioremap Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 20:36 ` Pavel Machek
2021-05-31 13:14 ` [PATCH 4.4 36/54] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io Greg Kroah-Hartman
` (19 subsequent siblings)
54 siblings, 1 reply; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Atul Gopinathan, Sasha Levin
From: Atul Gopinathan <atulgopinathan@gmail.com>
[ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]
The field "fm_res" of "struct snd_sb8" is never used/dereferenced
throughout the sb8.c code. Therefore there is no need for any null value
check after the "request_region()".
Add a comment note to make developers know about this and prevent any
"NULL check" patches on this part of code.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-36-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/isa/sb/sb8.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c
index b8e2391c33ff..4fa3b0f2a270 100644
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -109,7 +109,11 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)
acard = card->private_data;
card->private_free = snd_sb8_free;
- /* block the 0x388 port to avoid PnP conflicts */
+ /*
+ * Block the 0x388 port to avoid PnP conflicts.
+ * No need to check this value after request_region,
+ * as we never do anything with it.
+ */
acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
if (port[dev] != SNDRV_AUTO_PORT) {
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* Re: [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer
2021-05-31 13:14 ` [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
@ 2021-05-31 20:36 ` Pavel Machek
2021-05-31 21:43 ` Sasha Levin
0 siblings, 1 reply; 59+ messages in thread
From: Pavel Machek @ 2021-05-31 20:36 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Takashi Iwai, Atul Gopinathan, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 1635 bytes --]
Hi!
> [ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]
>
> The field "fm_res" of "struct snd_sb8" is never used/dereferenced
> throughout the sb8.c code. Therefore there is no need for any null value
> check after the "request_region()".
>
> Add a comment note to make developers know about this and prevent any
> "NULL check" patches on this part of code.
>
> Cc: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
> Link: https://lore.kernel.org/r/20210503115736.2104747-36-gregkh@linuxfoundation.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
This simply adds a comment... As I'm pretty sure anyone trying to
"fix" this will try that on mainline, it is even very useful comment.
That's something our documentation says we don't do in stable. I'd
prefer it not to be in.
Best regards,
Pavel
> +++ b/sound/isa/sb/sb8.c
> @@ -109,7 +109,11 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)
> acard = card->private_data;
> card->private_free = snd_sb8_free;
>
> - /* block the 0x388 port to avoid PnP conflicts */
> + /*
> + * Block the 0x388 port to avoid PnP conflicts.
> + * No need to check this value after request_region,
> + * as we never do anything with it.
> + */
> acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
>
> if (port[dev] != SNDRV_AUTO_PORT) {
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer
2021-05-31 20:36 ` Pavel Machek
@ 2021-05-31 21:43 ` Sasha Levin
0 siblings, 0 replies; 59+ messages in thread
From: Sasha Levin @ 2021-05-31 21:43 UTC (permalink / raw)
To: Pavel Machek
Cc: Greg Kroah-Hartman, linux-kernel, stable, Takashi Iwai, Atul Gopinathan
On Mon, May 31, 2021 at 10:36:38PM +0200, Pavel Machek wrote:
>Hi!
>
>> [ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]
>>
>> The field "fm_res" of "struct snd_sb8" is never used/dereferenced
>> throughout the sb8.c code. Therefore there is no need for any null value
>> check after the "request_region()".
>>
>> Add a comment note to make developers know about this and prevent any
>> "NULL check" patches on this part of code.
>>
>> Cc: Takashi Iwai <tiwai@suse.de>
>> Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
>> Link: https://lore.kernel.org/r/20210503115736.2104747-36-gregkh@linuxfoundation.org
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>This simply adds a comment... As I'm pretty sure anyone trying to
>"fix" this will try that on mainline, it is even very useful comment.
>
>That's something our documentation says we don't do in stable. I'd
>prefer it not to be in.
Now dropped, thanks!
--
Thanks,
Sasha
^ permalink raw reply [flat|nested] 59+ messages in thread
* [PATCH 4.4 36/54] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 35/54] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 37/54] libertas: register sysfs groups properly Greg Kroah-Hartman
` (18 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Phillip Potter, Sasha Levin
From: Phillip Potter <phil@philpotter.co.uk>
[ Upstream commit c446f0d4702d316e1c6bf621f70e79678d28830a ]
Move hw->cfg.mode and hw->addr.mode assignments from hw->ci->cfg_mode
and hw->ci->addr_mode respectively, to be before the subsequent checks
for memory IO mode (and possible ioremap calls in this case).
Also introduce ioremap error checks at both locations. This allows
resources to be properly freed on ioremap failure, as when the caller
of setup_io then subsequently calls release_io via its error path,
release_io can now correctly determine the mode as it has been set
before the ioremap call.
Finally, refactor release_io function so that it will call
release_mem_region in the memory IO case, regardless of whether or not
hw->cfg.p/hw->addr.p are NULL. This means resources are then properly
released on failure.
This properly implements the original reverted commit (d721fe99f6ad)
from the University of Minnesota, whilst also implementing the ioremap
check for the hw->ci->cfg_mode if block as well.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-42-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 24 ++++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index d5bdbaf93a1a..d0b6377b9834 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -645,17 +645,19 @@ static void
release_io(struct inf_hw *hw)
{
if (hw->cfg.mode) {
- if (hw->cfg.p) {
+ if (hw->cfg.mode == AM_MEMIO) {
release_mem_region(hw->cfg.start, hw->cfg.size);
- iounmap(hw->cfg.p);
+ if (hw->cfg.p)
+ iounmap(hw->cfg.p);
} else
release_region(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = AM_NONE;
}
if (hw->addr.mode) {
- if (hw->addr.p) {
+ if (hw->addr.mode == AM_MEMIO) {
release_mem_region(hw->addr.start, hw->addr.size);
- iounmap(hw->addr.p);
+ if (hw->addr.p)
+ iounmap(hw->addr.p);
} else
release_region(hw->addr.start, hw->addr.size);
hw->addr.mode = AM_NONE;
@@ -685,9 +687,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->cfg.start, (ulong)hw->cfg.size);
return err;
}
- if (hw->ci->cfg_mode == AM_MEMIO)
- hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = hw->ci->cfg_mode;
+ if (hw->ci->cfg_mode == AM_MEMIO) {
+ hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
+ if (!hw->cfg.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO cfg %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->cfg.start,
@@ -712,9 +717,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->addr.start, (ulong)hw->addr.size);
return err;
}
- if (hw->ci->addr_mode == AM_MEMIO)
- hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
hw->addr.mode = hw->ci->addr_mode;
+ if (hw->ci->addr_mode == AM_MEMIO) {
+ hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
+ if (!hw->addr.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->addr.start,
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 37/54] libertas: register sysfs groups properly
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 36/54] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 38/54] media: dvb: Add check on sp8870_readreg return Greg Kroah-Hartman
` (17 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kalle Valo, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ]
The libertas driver was trying to register sysfs groups "by hand" which
causes them to be created _after_ the device is initialized and
announced to userspace, which causes races and can prevent userspace
tools from seeing the sysfs files correctly.
Fix this up by using the built-in sysfs_groups pointers in struct
net_device which were created for this very reason, fixing the race
condition, and properly allowing for any error that might have occured
to be handled properly.
Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-54-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/libertas/mesh.c | 28 ++++------------------------
1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
index d0c881dd5846..f1e9cbcfdc16 100644
--- a/drivers/net/wireless/libertas/mesh.c
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -797,19 +797,6 @@ static const struct attribute_group mesh_ie_group = {
.attrs = mesh_ie_attrs,
};
-static void lbs_persist_config_init(struct net_device *dev)
-{
- int ret;
- ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
- ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
-static void lbs_persist_config_remove(struct net_device *dev)
-{
- sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
- sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
/***************************************************************************
* Initializing and starting, stopping mesh
@@ -1021,6 +1008,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
+ mesh_dev->sysfs_groups[0] = &lbs_mesh_attr_group;
+ mesh_dev->sysfs_groups[1] = &boot_opts_group;
+ mesh_dev->sysfs_groups[2] = &mesh_ie_group;
+
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
@@ -1028,19 +1019,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
goto err_free_netdev;
}
- ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- if (ret)
- goto err_unregister;
-
- lbs_persist_config_init(mesh_dev);
-
/* Everything successful */
ret = 0;
goto done;
-err_unregister:
- unregister_netdev(mesh_dev);
-
err_free_netdev:
free_netdev(mesh_dev);
@@ -1063,8 +1045,6 @@ void lbs_remove_mesh(struct lbs_private *priv)
lbs_deb_enter(LBS_DEB_MESH);
netif_stop_queue(mesh_dev);
netif_carrier_off(mesh_dev);
- sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- lbs_persist_config_remove(mesh_dev);
unregister_netdev(mesh_dev);
priv->mesh_dev = NULL;
kfree(mesh_dev->ieee80211_ptr);
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 38/54] media: dvb: Add check on sp8870_readreg return
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 37/54] libertas: register sysfs groups properly Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 39/54] media: gspca: properly check for errors in po1030_probe() Greg Kroah-Hartman
` (16 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Young, Mauro Carvalho Chehab,
Alaa Emad, Sasha Levin
From: Alaa Emad <alaaemadhossney.ae@gmail.com>
[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]
The function sp8870_readreg returns a negative value when i2c_transfer
fails so properly check for this and return the error if it happens.
Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Alaa Emad <alaaemadhossney.ae@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-60-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-frontends/sp8870.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index e87ac30d7fb8..b43135c5a960 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -293,7 +293,9 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
sp8870_writereg(state, 0xc05, reg0xc05);
// read status reg in order to clear pending irqs
- sp8870_readreg(state, 0x200);
+ err = sp8870_readreg(state, 0x200);
+ if (err < 0)
+ return err;
// system controller start
sp8870_microcontroller_start(state);
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 39/54] media: gspca: properly check for errors in po1030_probe()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 38/54] media: dvb: Add check on sp8870_readreg return Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 40/54] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic Greg Kroah-Hartman
` (15 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mauro Carvalho Chehab, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]
If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to
initialize the device but return the error to the calling funtion.
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-64-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/gspca/m5602/m5602_po1030.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c
index 4bf5c43424b7..971253dafb57 100644
--- a/drivers/media/usb/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c
@@ -55,6 +55,7 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
int po1030_probe(struct sd *sd)
{
u8 dev_id_h = 0, i;
+ int err;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
if (force_sensor) {
@@ -73,10 +74,13 @@ int po1030_probe(struct sd *sd)
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
u8 data = preinit_po1030[i][2];
if (preinit_po1030[i][0] == SENSOR)
- m5602_write_sensor(sd,
- preinit_po1030[i][1], &data, 1);
+ err = m5602_write_sensor(sd, preinit_po1030[i][1],
+ &data, 1);
else
- m5602_write_bridge(sd, preinit_po1030[i][1], data);
+ err = m5602_write_bridge(sd, preinit_po1030[i][1],
+ data);
+ if (err < 0)
+ return err;
}
if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 40/54] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 39/54] media: gspca: properly check for errors in po1030_probe() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 41/54] openrisc: Define memory barrier mb Greg Kroah-Hartman
` (14 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Khalid Aziz, Matt Wang,
Martin K. Petersen, Sasha Levin
From: Matt Wang <wwentao@vmware.com>
[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]
Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems. With this commit,
64-bit kernel will enumerate 8*15 non-existing disks. This is caused
by the broken CCB structure. The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB. This leads to incorrect response to INQUIRY
commands during enumeration.
Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.
Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/BusLogic.c | 6 +++---
drivers/scsi/BusLogic.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index c7be7bb37209..b9b4491d732a 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3081,11 +3081,11 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
ccb->opcode = BLOGIC_INITIATOR_CCB_SG;
ccb->datalen = count * sizeof(struct blogic_sg_seg);
if (blogic_multimaster_type(adapter))
- ccb->data = (void *)((unsigned int) ccb->dma_handle +
+ ccb->data = (unsigned int) ccb->dma_handle +
((unsigned long) &ccb->sglist -
- (unsigned long) ccb));
+ (unsigned long) ccb);
else
- ccb->data = ccb->sglist;
+ ccb->data = virt_to_32bit_virt(ccb->sglist);
scsi_for_each_sg(command, sg, count, i) {
ccb->sglist[i].segbytes = sg_dma_len(sg);
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index b53ec2f1e8cd..5c950a7a1b1c 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -821,7 +821,7 @@ struct blogic_ccb {
unsigned char cdblen; /* Byte 2 */
unsigned char sense_datalen; /* Byte 3 */
u32 datalen; /* Bytes 4-7 */
- void *data; /* Bytes 8-11 */
+ u32 data; /* Bytes 8-11 */
unsigned char:8; /* Byte 12 */
unsigned char:8; /* Byte 13 */
enum blogic_adapter_status adapter_status; /* Byte 14 */
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 41/54] openrisc: Define memory barrier mb
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 40/54] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 42/54] btrfs: do not BUG_ON in link_to_fixup_dir Greg Kroah-Hartman
` (13 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra, Stafford Horne, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]
This came up in the discussion of the requirements of qspinlock on an
architecture. OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.
Peter defined it in the mail thread writing:
As near as I can tell this should do. The arch spec only lists
this one instruction and the text makes it sound like a completion
barrier.
This is correct so applying this patch.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/openrisc/include/asm/barrier.h | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 arch/openrisc/include/asm/barrier.h
diff --git a/arch/openrisc/include/asm/barrier.h b/arch/openrisc/include/asm/barrier.h
new file mode 100644
index 000000000000..7538294721be
--- /dev/null
+++ b/arch/openrisc/include/asm/barrier.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#define mb() asm volatile ("l.msync" ::: "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* __ASM_BARRIER_H */
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 42/54] btrfs: do not BUG_ON in link_to_fixup_dir
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 41/54] openrisc: Define memory barrier mb Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 43/54] drm/amdgpu: Fix a use-after-free Greg Kroah-Hartman
` (12 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Josef Bacik, David Sterba, Sasha Levin
From: Josef Bacik <josef@toxicpanda.com>
[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]
While doing error injection testing I got the following panic
kernel BUG at fs/btrfs/tree-log.c:1862!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:link_to_fixup_dir+0xd5/0xe0
RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001
R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800
R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065
FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0
Call Trace:
replay_one_buffer+0x409/0x470
? btree_read_extent_buffer_pages+0xd0/0x110
walk_up_log_tree+0x157/0x1e0
walk_log_tree+0xa6/0x1d0
btrfs_recover_log_trees+0x1da/0x360
? replay_one_extent+0x7b0/0x7b0
open_ctree+0x1486/0x1720
btrfs_mount_root.cold+0x12/0xea
? __kmalloc_track_caller+0x12f/0x240
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x380
? vfs_parse_fs_string+0x4d/0x90
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
path_mount+0x433/0xa10
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
We can get -EIO or any number of legitimate errors from
btrfs_search_slot(), panicing here is not the appropriate response. The
error path for this code handles errors properly, simply return the
error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/tree-log.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index ee26ccd12da8..4cab553c347a 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1582,8 +1582,6 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans,
ret = btrfs_update_inode(trans, root, inode);
} else if (ret == -EEXIST) {
ret = 0;
- } else {
- BUG(); /* Logic Error */
}
iput(inode);
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 43/54] drm/amdgpu: Fix a use-after-free
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 42/54] btrfs: do not BUG_ON in link_to_fixup_dir Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 44/54] net: netcp: Fix an error message Greg Kroah-Hartman
` (11 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, xinhui pan, Christian König,
Alex Deucher, Sasha Levin
From: xinhui pan <xinhui.pan@amd.com>
[ Upstream commit 1e5c37385097c35911b0f8a0c67ffd10ee1af9a2 ]
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu]
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 6beb3e76e1c9..014b87143837 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -737,6 +737,7 @@ static void amdgpu_ttm_tt_unpopulate(struct ttm_tt *ttm)
if (gtt && gtt->userptr) {
kfree(ttm->sg);
+ ttm->sg = NULL;
ttm->page_flags &= ~TTM_PAGE_FLAG_SG;
return;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 44/54] net: netcp: Fix an error message
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 43/54] drm/amdgpu: Fix a use-after-free Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 18:41 ` Marion & Christophe JAILLET
2021-05-31 13:14 ` [PATCH 4.4 45/54] net: bnx2: Fix error return code in bnx2_init_board() Greg Kroah-Hartman
` (10 subsequent siblings)
54 siblings, 1 reply; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, David S. Miller,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]
'ret' is known to be 0 here.
The expected error code is stored in 'tx_pipe->dma_queue', so use it
instead.
While at it, switch from %d to %pe which is more user friendly.
Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/netcp_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 37b9b39192ec..8f7610805dda 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1284,8 +1284,8 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
tx_pipe->dma_queue = knav_queue_open(name, tx_pipe->dma_queue_id,
KNAV_QUEUE_SHARED);
if (IS_ERR(tx_pipe->dma_queue)) {
- dev_err(dev, "Could not open DMA queue for channel \"%s\": %d\n",
- name, ret);
+ dev_err(dev, "Could not open DMA queue for channel \"%s\": %pe\n",
+ name, tx_pipe->dma_queue);
ret = PTR_ERR(tx_pipe->dma_queue);
goto err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* Re: [PATCH 4.4 44/54] net: netcp: Fix an error message
2021-05-31 13:14 ` [PATCH 4.4 44/54] net: netcp: Fix an error message Greg Kroah-Hartman
@ 2021-05-31 18:41 ` Marion & Christophe JAILLET
0 siblings, 0 replies; 59+ messages in thread
From: Marion & Christophe JAILLET @ 2021-05-31 18:41 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, David S. Miller, Sasha Levin, Dan Carpenter
Le 31/05/2021 à 15:14, Greg Kroah-Hartman a écrit :
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>
> [ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]
>
> 'ret' is known to be 0 here.
> The expected error code is stored in 'tx_pipe->dma_queue', so use it
> instead.
>
> While at it, switch from %d to %pe which is more user friendly.
>
> Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/net/ethernet/ti/netcp_core.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
> index 37b9b39192ec..8f7610805dda 100644
> --- a/drivers/net/ethernet/ti/netcp_core.c
> +++ b/drivers/net/ethernet/ti/netcp_core.c
> @@ -1284,8 +1284,8 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
> tx_pipe->dma_queue = knav_queue_open(name, tx_pipe->dma_queue_id,
> KNAV_QUEUE_SHARED);
> if (IS_ERR(tx_pipe->dma_queue)) {
> - dev_err(dev, "Could not open DMA queue for channel \"%s\": %d\n",
> - name, ret);
> + dev_err(dev, "Could not open DMA queue for channel \"%s\": %pe\n",
> + name, tx_pipe->dma_queue);
> ret = PTR_ERR(tx_pipe->dma_queue);
> goto err;
> }
Hi,
Apparently %pe is only supported up to (including) 5.5. It is not part
of 5.4.123.
So this patch should not be backported here or should be backported
differently, ie:
leave dev_err as-is
move "ret = PTR_ERR(tx_pipe->dma_queue);" 1 line above
(or %pe should be backported first)
PS: adding Dan Carpenter because we had a small discussion about some
potential backport issue when, using %pe
CJ
^ permalink raw reply [flat|nested] 59+ messages in thread
* [PATCH 4.4 45/54] net: bnx2: Fix error return code in bnx2_init_board()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 44/54] net: netcp: Fix an error message Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 46/54] mld: fix panic in mld_newpack() Greg Kroah-Hartman
` (9 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Zhen Lei, Michael Chan,
David S. Miller, Sasha Levin
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ]
Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 8fc3f3c137f8..1616647719ba 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8234,9 +8234,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
BNX2_WR(bp, PCI_COMMAND, reg);
} else if ((BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A1) &&
!(bp->flags & BNX2_FLAG_PCIX)) {
-
dev_err(&pdev->dev,
"5706 A1 can only be used in a PCIX bus, aborting\n");
+ rc = -EPERM;
goto err_out_unmap;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 46/54] mld: fix panic in mld_newpack()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 45/54] net: bnx2: Fix error return code in bnx2_init_board() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 47/54] staging: emxx_udc: fix loop in _nbu2ss_nuke() Greg Kroah-Hartman
` (8 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 020ef930b826d21c5446fdc9db80fd72a791bc21 ]
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip netns exec B ip link set veth1 up
ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
for i in {1..99}
do
let A=$i-1
ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
ip netns exec A ip link set ip6gre$i up
ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
ip netns exec B ip link set ip6gre$i up
done
Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS: 0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
skb_put.cold.104+0x22/0x22
ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? rcu_read_lock_sched_held+0x91/0xc0
mld_newpack+0x398/0x8f0
? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
? lock_contended+0xc40/0xc40
add_grhead.isra.33+0x280/0x380
add_grec+0x5ca/0xff0
? mld_sendpack+0xf40/0xf40
? lock_downgrade+0x690/0x690
mld_send_initial_cr.part.34+0xb9/0x180
ipv6_mc_dad_complete+0x15d/0x1b0
addrconf_dad_completed+0x8d2/0xbb0
? lock_downgrade+0x690/0x690
? addrconf_rs_timer+0x660/0x660
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
Allowing high order page allocation could fix this problem.
Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/mcast.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 2d28f0b54494..636425999aac 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1573,10 +1573,7 @@ static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu)
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- /* limit our allocations to order-0 page */
- size = min_t(int, size, SKB_MAX_ORDER(0, 0));
skb = sock_alloc_send_skb(sk, size, 1, &err);
-
if (!skb)
return NULL;
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 47/54] staging: emxx_udc: fix loop in _nbu2ss_nuke()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 46/54] mld: fix panic in mld_newpack() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 48/54] scsi: libsas: Use _safe() loop in sas_resume_port() Greg Kroah-Hartman
` (7 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit e0112a7c9e847ada15a631b88e279d547e8f26a7 ]
The _nbu2ss_ep_done() function calls:
list_del_init(&req->queue);
which means that the loop will never exit.
Fixes: ca3d253eb967 ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/emxx_udc/emxx_udc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 91ff8fb0cc3a..102eee7d2e4f 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -2193,7 +2193,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
struct nbu2ss_ep *ep,
int status)
{
- struct nbu2ss_req *req;
+ struct nbu2ss_req *req, *n;
/* Endpoint Disable */
_nbu2ss_epn_exit(udc, ep);
@@ -2205,7 +2205,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
return 0;
/* called with irqs blocked */
- list_for_each_entry(req, &ep->queue, queue) {
+ list_for_each_entry_safe(req, n, &ep->queue, queue) {
_nbu2ss_ep_done(ep, req, status);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 48/54] scsi: libsas: Use _safe() loop in sas_resume_port()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 47/54] staging: emxx_udc: fix loop in _nbu2ss_nuke() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 49/54] sch_dsmark: fix a NULL deref in qdisc_reset() Greg Kroah-Hartman
` (6 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Garry, Dan Carpenter,
Martin K. Petersen, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ]
If sas_notify_lldd_dev_found() fails then this code calls:
sas_unregister_dev(port, dev);
which removes "dev", our list iterator, from the list. This could lead to
an endless loop. We need to use list_for_each_entry_safe().
Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/libsas/sas_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index d3c5297c6c89..30e0730f613e 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -41,7 +41,7 @@ static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy
static void sas_resume_port(struct asd_sas_phy *phy)
{
- struct domain_device *dev;
+ struct domain_device *dev, *n;
struct asd_sas_port *port = phy->port;
struct sas_ha_struct *sas_ha = phy->ha;
struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
@@ -60,7 +60,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
* 1/ presume every device came back
* 2/ force the next revalidation to check all expander phys
*/
- list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
int i, rc;
rc = sas_notify_lldd_dev_found(dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 49/54] sch_dsmark: fix a NULL deref in qdisc_reset()
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 48/54] scsi: libsas: Use _safe() loop in sas_resume_port() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 50/54] MIPS: alchemy: xxs1500: add gpio-au1000.h header file Greg Kroah-Hartman
` (5 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 9b76eade16423ef06829cccfe3e100cfce31afcd ]
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.
Test commands:
sysctl net.core.default_qdisc=dsmark -w
ip link add dummy0 type dummy
ip link add vw0 link dummy0 type virt_wifi
ip link set vw0 up
Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS: 00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rcu_read_lock_bh_held+0xa0/0xa0
dsmark_reset+0x3d/0xf0 [sch_dsmark]
qdisc_reset+0xa9/0x680
qdisc_destroy+0x84/0x370
qdisc_create_dflt+0x1fe/0x380
attach_one_default_qdisc.constprop.41+0xa4/0x180
dev_activate+0x4d5/0x8c0
? __dev_open+0x268/0x390
__dev_open+0x270/0x390
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/sch_dsmark.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 5f8f6d94336c..f5d2c32dae24 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -404,7 +404,8 @@ static void dsmark_reset(struct Qdisc *sch)
struct dsmark_qdisc_data *p = qdisc_priv(sch);
pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
- qdisc_reset(p->q);
+ if (p->q)
+ qdisc_reset(p->q);
sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 50/54] MIPS: alchemy: xxs1500: add gpio-au1000.h header file
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 49/54] sch_dsmark: fix a NULL deref in qdisc_reset() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 51/54] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c Greg Kroah-Hartman
` (4 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Thomas Bogendoerfer,
linux-mips, Manuel Lauss, Ralf Baechle, Manuel Lauss,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]
board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.
../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
56 | alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
57 | alchemy_gpio2_enable();
Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/alchemy/board-xxs1500.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index 0fc53e08a894..c05f7376148a 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -30,6 +30,7 @@
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <prom.h>
const char *get_system_type(void)
--
2.30.2
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH 4.4 51/54] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 50/54] MIPS: alchemy: xxs1500: add gpio-au1000.h header file Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 52/54] hugetlbfs: hugetlb_fault_mutex_hash() cleanup Greg Kroah-Hartman
` (3 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Guenter Roeck,
Wim Van Sebroeck, John Crispin, linux-mips, linux-watchdog,
Thomas Bogendoerfer, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]
rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.
ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!
Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/ralink/of.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sizes.h>
#include <linux/of_fdt.h>
@@ -27,6 +28,7 @@
__iomem void *rt_sysc_membase;
__iomem void *rt_memc_membase;
+EXPORT_SYMBOL_GPL(rt_sysc_membase);
__iomem void *plat_of_remap_node(const char *node)
{
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 52/54] hugetlbfs: hugetlb_fault_mutex_hash() cleanup
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 51/54] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 53/54] bluetooth: eliminate the potential race condition when removing the HCI controller Greg Kroah-Hartman
` (2 subsequent siblings)
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Kravetz, Nathan Chancellor,
Davidlohr Bueso, Andrew Morton, Nick Desaulniers, Ilie Halip,
David Bolvansky, Linus Torvalds
From: Mike Kravetz <mike.kravetz@oracle.com>
commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream.
A new clang diagnostic (-Wsizeof-array-div) warns about the calculation
to determine the number of u32's in an array of unsigned longs.
Suppress warning by adding parentheses.
While looking at the above issue, noticed that the 'address' parameter
to hugetlb_fault_mutex_hash is no longer used. So, remove it from the
definition and all callers.
No functional change.
Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: David Bolvansky <david.bolvansky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hugetlbfs/inode.c | 4 ++--
include/linux/hugetlb.h | 2 +-
mm/hugetlb.c | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -414,7 +414,7 @@ static void remove_inode_hugepages(struc
if (next >= end)
break;
- hash = hugetlb_fault_mutex_hash(h, mapping, next, 0);
+ hash = hugetlb_fault_mutex_hash(h, mapping, next);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
lock_page(page);
@@ -630,7 +630,7 @@ static long hugetlbfs_fallocate(struct f
addr = index * hpage_size;
/* mutex taken here, fault path and hole punch */
- hash = hugetlb_fault_mutex_hash(h, mapping, index, addr);
+ hash = hugetlb_fault_mutex_hash(h, mapping, index);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
/* See if already present in mapping to avoid alloc/free */
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -92,7 +92,7 @@ void free_huge_page(struct page *page);
void hugetlb_fix_reserve_counts(struct inode *inode, bool restore_reserve);
extern struct mutex *hugetlb_fault_mutex_table;
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address);
+ pgoff_t idx);
#ifdef CONFIG_ARCH_WANT_HUGE_PMD_SHARE
pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud);
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3771,7 +3771,7 @@ backout_unlocked:
#ifdef CONFIG_SMP
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address)
+ pgoff_t idx)
{
unsigned long key[2];
u32 hash;
@@ -3779,7 +3779,7 @@ u32 hugetlb_fault_mutex_hash(struct hsta
key[0] = (unsigned long) mapping;
key[1] = idx;
- hash = jhash2((u32 *)&key, sizeof(key)/sizeof(u32), 0);
+ hash = jhash2((u32 *)&key, sizeof(key)/(sizeof(u32)), 0);
return hash & (num_fault_mutexes - 1);
}
@@ -3789,7 +3789,7 @@ u32 hugetlb_fault_mutex_hash(struct hsta
* return 0 and avoid the hashing overhead.
*/
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address)
+ pgoff_t idx)
{
return 0;
}
@@ -3834,7 +3834,7 @@ int hugetlb_fault(struct mm_struct *mm,
* get spurious allocation failures if two CPUs race to instantiate
* the same page in the page cache.
*/
- hash = hugetlb_fault_mutex_hash(h, mapping, idx, address);
+ hash = hugetlb_fault_mutex_hash(h, mapping, idx);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
entry = huge_ptep_get(ptep);
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 53/54] bluetooth: eliminate the potential race condition when removing the HCI controller
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 52/54] hugetlbfs: hugetlb_fault_mutex_hash() cleanup Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.4 54/54] usb: core: reduce power-on-good delay time of root hub Greg Kroah-Hartman
2021-05-31 19:07 ` [PATCH 4.4 00/54] 4.4.271-rc1 review Pavel Machek
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lin Ma, Marcel Holtmann, Nobuhiro Iwamatsu
From: Lin Ma <linma@zju.edu.cn>
commit e2cb6b891ad2b8caa9131e3be70f45243df82a80 upstream.
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
[iwamatsu: adjust filename, arguments of __hci_req_sync(). CVE-2021-32399]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/hci_core.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -371,12 +371,17 @@ static int hci_req_sync(struct hci_dev *
{
int ret;
- if (!test_bit(HCI_UP, &hdev->flags))
- return -ENETDOWN;
-
/* Serialize all requests */
hci_req_lock(hdev);
- ret = __hci_req_sync(hdev, req, opt, timeout);
+ /* check the state after obtaing the lock to protect the HCI_UP
+ * against any races from hci_dev_do_close when the controller
+ * gets removed.
+ */
+ if (test_bit(HCI_UP, &hdev->flags))
+ ret = __hci_req_sync(hdev, req, opt, timeout);
+ else
+ ret = -ENETDOWN;
+
hci_req_unlock(hdev);
return ret;
^ permalink raw reply [flat|nested] 59+ messages in thread* [PATCH 4.4 54/54] usb: core: reduce power-on-good delay time of root hub
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 53/54] bluetooth: eliminate the potential race condition when removing the HCI controller Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 19:07 ` [PATCH 4.4 00/54] 4.4.271-rc1 review Pavel Machek
54 siblings, 0 replies; 59+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Chunfeng Yun
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.
Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.
Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -140,8 +140,10 @@ static inline unsigned hub_power_on_good
{
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
- /* Wait at least 100 msec for power to become stable */
- return max(delay, 100U);
+ if (!hub->hdev->parent) /* root hub */
+ return delay;
+ else /* Wait at least 100 msec for power to become stable */
+ return max(delay, 100U);
}
static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH 4.4 00/54] 4.4.271-rc1 review
2021-05-31 13:13 [PATCH 4.4 00/54] 4.4.271-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.4 54/54] usb: core: reduce power-on-good delay time of root hub Greg Kroah-Hartman
@ 2021-05-31 19:07 ` Pavel Machek
54 siblings, 0 replies; 59+ messages in thread
From: Pavel Machek @ 2021-05-31 19:07 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
[-- Attachment #1: Type: text/plain, Size: 653 bytes --]
Hi!
> This is the start of the stable review cycle for the 4.4.271 release.
> There are 54 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]
^ permalink raw reply [flat|nested] 59+ messages in thread