* [PATCH 4.19 001/116] mm, vmstat: drop zone->lock in /proc/pagetypeinfo
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
@ 2021-05-31 13:12 ` Greg Kroah-Hartman
2021-05-31 13:12 ` [PATCH 4.19 002/116] usb: dwc3: gadget: Enable suspend events Greg Kroah-Hartman
` (118 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:12 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Stephen Brennan, Aruna Ramakrishna, Khalid Aziz
From: Stephen Brennan <stephen.s.brennan@oracle.com>
Commit 93b3a674485f6a4b8ffff85d1682d5e8b7c51560 upstream
Commit 93b3a674485f ("mm,vmstat: reduce zone->lock holding time by
/proc/pagetypeinfo") upstream caps the number of iterations over each
free_list at 100,000, and also drops the zone->lock in between each
migrate type. Capping the iteration count alters the file contents in
some cases, which means this approach may not be suitable for stable
backports.
However, dropping zone->lock in between migrate types (and, as a result,
page orders) will not change the /proc/pagetypeinfo file contents. It
can significantly reduce the length of time spent with IRQs disabled,
which can prevent missed interrupts or soft lockups which we have
observed on systems with particularly large memory.
Thus, this commit is a modified version of the upstream one which only
drops the lock in between migrate types.
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/vmstat.c | 3 +++
1 file changed, 3 insertions(+)
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1384,6 +1384,9 @@ static void pagetypeinfo_showfree_print(
list_for_each(curr, &area->free_list[mtype])
freecount++;
seq_printf(m, "%6lu ", freecount);
+ spin_unlock_irq(&zone->lock);
+ cond_resched();
+ spin_lock_irq(&zone->lock);
}
seq_putc(m, '\n');
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 002/116] usb: dwc3: gadget: Enable suspend events
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
2021-05-31 13:12 ` [PATCH 4.19 001/116] mm, vmstat: drop zone->lock in /proc/pagetypeinfo Greg Kroah-Hartman
@ 2021-05-31 13:12 ` Greg Kroah-Hartman
2021-05-31 13:12 ` [PATCH 4.19 003/116] NFC: nci: fix memory leak in nci_allocate_device Greg Kroah-Hartman
` (117 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:12 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Jack Pham
From: Jack Pham <jackp@codeaurora.org>
commit d1d90dd27254c44d087ad3f8b5b3e4fff0571f45 upstream.
commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event
handler") introduced (nearly 5 years ago!) an interrupt handler for
U3/L1-L2 suspend events. The problem is that these events aren't
currently enabled in the DEVTEN register so the handler is never
even invoked. Fix this simply by enabling the corresponding bit
in dwc3_gadget_enable_irq() using the same revision check as found
in the handler.
Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.org
[jackp@codeaurora.org: backport to pre-5.7 by replacing
DWC3_IS_VER_PRIOR check with direct comparison of dwc->revision]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1834,6 +1834,10 @@ static void dwc3_gadget_enable_irq(struc
if (dwc->revision < DWC3_REVISION_250A)
reg |= DWC3_DEVTEN_ULSTCNGEN;
+ /* On 2.30a and above this bit enables U3/L2-L1 Suspend Events */
+ if (dwc->revision >= DWC3_REVISION_230A)
+ reg |= DWC3_DEVTEN_EOPFEN;
+
dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 003/116] NFC: nci: fix memory leak in nci_allocate_device
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
2021-05-31 13:12 ` [PATCH 4.19 001/116] mm, vmstat: drop zone->lock in /proc/pagetypeinfo Greg Kroah-Hartman
2021-05-31 13:12 ` [PATCH 4.19 002/116] usb: dwc3: gadget: Enable suspend events Greg Kroah-Hartman
@ 2021-05-31 13:12 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 004/116] cifs: set server->cipher_type to AES-128-CCM for SMB3.0 Greg Kroah-Hartman
` (116 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:12 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+19bcfc64a8df1318d1c3,
Dongliang Mu, David S. Miller
From: Dongliang Mu <mudongliangabcd@gmail.com>
commit e0652f8bb44d6294eeeac06d703185357f25d50b upstream.
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev.
Fix this by freeing hci_dev in nci_free_device.
BUG: memory leak
unreferenced object 0xffff888111ea6800 (size 1024):
comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline]
[<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline]
[<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784
[<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline]
[<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132
[<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153
[<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345
[<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
[<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740
[<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846
[<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
[<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914
[<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
[<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109
[<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164
[<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/nfc/nci_core.h | 1 +
net/nfc/nci/core.c | 1 +
net/nfc/nci/hci.c | 5 +++++
3 files changed, 7 insertions(+)
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -310,6 +310,7 @@ int nci_nfcc_loopback(struct nci_dev *nd
struct sk_buff **resp);
struct nci_hci_dev *nci_hci_allocate(struct nci_dev *ndev);
+void nci_hci_deallocate(struct nci_dev *ndev);
int nci_hci_send_event(struct nci_dev *ndev, u8 gate, u8 event,
const u8 *param, size_t param_len);
int nci_hci_send_cmd(struct nci_dev *ndev, u8 gate,
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -1187,6 +1187,7 @@ EXPORT_SYMBOL(nci_allocate_device);
void nci_free_device(struct nci_dev *ndev)
{
nfc_free_device(ndev->nfc_dev);
+ nci_hci_deallocate(ndev);
kfree(ndev);
}
EXPORT_SYMBOL(nci_free_device);
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -807,3 +807,8 @@ struct nci_hci_dev *nci_hci_allocate(str
return hdev;
}
+
+void nci_hci_deallocate(struct nci_dev *ndev)
+{
+ kfree(ndev->hci_dev);
+}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 004/116] cifs: set server->cipher_type to AES-128-CCM for SMB3.0
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2021-05-31 13:12 ` [PATCH 4.19 003/116] NFC: nci: fix memory leak in nci_allocate_device Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 005/116] NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Greg Kroah-Hartman
` (115 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Aurelien Aptel, Steve French
From: Aurelien Aptel <aaptel@suse.com>
commit 6d2fcfe6b517fe7cbf2687adfb0a16cdcd5d9243 upstream.
SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.
When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.
cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).
For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.
Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/smb2pdu.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -791,6 +791,13 @@ SMB2_negotiate(const unsigned int xid, s
/* Internal types */
server->capabilities |= SMB2_NT_FIND | SMB2_LARGE_FILES;
+ /*
+ * SMB3.0 supports only 1 cipher and doesn't have a encryption neg context
+ * Set the cipher type manually.
+ */
+ if (server->dialect == SMB30_PROT_ID && (server->capabilities & SMB2_GLOBAL_CAP_ENCRYPTION))
+ server->cipher_type = SMB2_ENCRYPTION_AES128_CCM;
+
security_blob = smb2_get_data_area_len(&blob_offset, &blob_length,
(struct smb2_sync_hdr *)rsp);
/*
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 005/116] NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 004/116] cifs: set server->cipher_type to AES-128-CCM for SMB3.0 Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 006/116] iommu/vt-d: Fix sysfs leak in alloc_iommu() Greg Kroah-Hartman
` (114 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Anna Schumaker, Trond Myklebust
From: Anna Schumaker <Anna.Schumaker@Netapp.com>
commit a421d218603ffa822a0b8045055c03eae394a7eb upstream.
Commit de144ff4234f changes _pnfs_return_layout() to call
pnfs_mark_matching_lsegs_return() passing NULL as the struct
pnfs_layout_range argument. Unfortunately,
pnfs_mark_matching_lsegs_return() doesn't check if we have a value here
before dereferencing it, causing an oops.
I'm able to hit this crash consistently when running connectathon basic
tests on NFS v4.1/v4.2 against Ontap.
Fixes: de144ff4234f ("NFSv4: Don't discard segments marked for return in _pnfs_return_layout()")
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/pnfs.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1268,6 +1268,11 @@ _pnfs_return_layout(struct inode *ino)
{
struct pnfs_layout_hdr *lo = NULL;
struct nfs_inode *nfsi = NFS_I(ino);
+ struct pnfs_layout_range range = {
+ .iomode = IOMODE_ANY,
+ .offset = 0,
+ .length = NFS4_MAX_UINT64,
+ };
LIST_HEAD(tmp_list);
nfs4_stateid stateid;
int status = 0;
@@ -1294,16 +1299,10 @@ _pnfs_return_layout(struct inode *ino)
}
valid_layout = pnfs_layout_is_valid(lo);
pnfs_clear_layoutcommit(ino, &tmp_list);
- pnfs_mark_matching_lsegs_return(lo, &tmp_list, NULL, 0);
+ pnfs_mark_matching_lsegs_return(lo, &tmp_list, &range, 0);
- if (NFS_SERVER(ino)->pnfs_curr_ld->return_range) {
- struct pnfs_layout_range range = {
- .iomode = IOMODE_ANY,
- .offset = 0,
- .length = NFS4_MAX_UINT64,
- };
+ if (NFS_SERVER(ino)->pnfs_curr_ld->return_range)
NFS_SERVER(ino)->pnfs_curr_ld->return_range(lo, &range);
- }
/* Don't send a LAYOUTRETURN if list was initially empty */
if (!test_bit(NFS_LAYOUT_RETURN_REQUESTED, &lo->plh_flags) ||
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 006/116] iommu/vt-d: Fix sysfs leak in alloc_iommu()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 005/116] NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 007/116] perf intel-pt: Fix sample instruction bytes Greg Kroah-Hartman
` (113 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rolf Eike Beer, Lu Baolu, Joerg Roedel
From: Rolf Eike Beer <eb@emlix.com>
commit 0ee74d5a48635c848c20f152d0d488bf84641304 upstream.
iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors.
Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device")
Cc: stable@vger.kernel.org # 4.11.x
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com
Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/dmar.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1119,7 +1119,7 @@ static int alloc_iommu(struct dmar_drhd_
err = iommu_device_register(&iommu->iommu);
if (err)
- goto err_unmap;
+ goto err_sysfs;
}
drhd->iommu = iommu;
@@ -1127,6 +1127,8 @@ static int alloc_iommu(struct dmar_drhd_
return 0;
+err_sysfs:
+ iommu_device_sysfs_remove(&iommu->iommu);
err_unmap:
unmap_iommu(iommu);
error_free_seq_id:
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 007/116] perf intel-pt: Fix sample instruction bytes
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 006/116] iommu/vt-d: Fix sysfs leak in alloc_iommu() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 008/116] perf intel-pt: Fix transaction abort handling Greg Kroah-Hartman
` (112 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Andi Kleen, Jiri Olsa,
Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
commit c954eb72b31a9dc56c99b450253ec5b121add320 upstream.
The decoder reports the current instruction if it was decoded. In some
cases the current instruction is not decoded, in which case the instruction
bytes length must be set to zero. Ensure that is always done.
Note perf script can anyway get the instruction bytes for any samples where
they are not present.
Also note, that there is a redundant "ptq->insn_len = 0" statement which is
not removed until a subsequent patch in order to make this patch apply
cleanly to stable branches.
Example:
A machne that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
Before:
# perf script --itrace=xe -F+flags,+insn,-period --xed --ns
xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) mov $0xffffffff, %eax
xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) mov $0xffffffff, %eax
After:
# perf script --itrace=xe -F+flags,+insn,-period --xed --ns
xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) xbegin 0x6
xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) xabort $0x1
Fixes: faaa87680b25d ("perf intel-pt/bts: Report instruction bytes and length in sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/intel-pt.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -505,8 +505,10 @@ static int intel_pt_walk_next_insn(struc
*ip += intel_pt_insn->length;
- if (to_ip && *ip == to_ip)
+ if (to_ip && *ip == to_ip) {
+ intel_pt_insn->length = 0;
goto out_no_cache;
+ }
if (*ip >= al.map->end)
break;
@@ -893,6 +895,7 @@ static void intel_pt_set_pid_tid_cpu(str
static void intel_pt_sample_flags(struct intel_pt_queue *ptq)
{
+ ptq->insn_len = 0;
if (ptq->state->flags & INTEL_PT_ABORT_TX) {
ptq->flags = PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TX_ABORT;
} else if (ptq->state->flags & INTEL_PT_ASYNC) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 008/116] perf intel-pt: Fix transaction abort handling
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 007/116] perf intel-pt: Fix sample instruction bytes Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 009/116] proc: Check /proc/$pid/attr/ writes against file opener Greg Kroah-Hartman
` (111 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Andi Kleen, Jiri Olsa,
Arnaldo Carvalho de Melo
From: Adrian Hunter <adrian.hunter@intel.com>
commit cb7987837c31b217b28089bbc78922d5c9187869 upstream.
When adding support for power events, some handling of FUP packets was
unified. That resulted in breaking reporting of TSX aborts, by not
considering the associated TIP packet. Fix that.
Example:
A machine that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
Before:
# perf script --itrace=be -F+flags,+addr,-period,-event --ns
xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort)
xabort 1478 [007] 92161.431348624: jmp 400b96 main+0x29 (/root/xabort) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431348624: return 400bb4 main+0x47 (/root/xabort) => 400b87 main+0x1a (/root/xabort)
xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort)
xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort)
xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)
After:
# perf script --itrace=be -F+flags,+addr,-period,-event --ns
xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort)
xabort 1478 [007] 92161.431348624: tx abrt 400b93 main+0x26 (/root/xabort) => 400b87 main+0x1a (/root/xabort)
xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort)
xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort)
xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
+++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
@@ -1063,6 +1063,8 @@ static bool intel_pt_fup_event(struct in
decoder->set_fup_tx_flags = false;
decoder->tx_flags = decoder->fup_tx_flags;
decoder->state.type = INTEL_PT_TRANSACTION;
+ if (decoder->fup_tx_flags & INTEL_PT_ABORT_TX)
+ decoder->state.type |= INTEL_PT_BRANCH;
decoder->state.from_ip = decoder->ip;
decoder->state.to_ip = 0;
decoder->state.flags = decoder->fup_tx_flags;
@@ -1129,8 +1131,10 @@ static int intel_pt_walk_fup(struct inte
return 0;
if (err == -EAGAIN ||
intel_pt_fup_with_nlip(decoder, &intel_pt_insn, ip, err)) {
+ bool no_tip = decoder->pkt_state != INTEL_PT_STATE_FUP;
+
decoder->pkt_state = INTEL_PT_STATE_IN_SYNC;
- if (intel_pt_fup_event(decoder))
+ if (intel_pt_fup_event(decoder) && no_tip)
return 0;
return -EAGAIN;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 009/116] proc: Check /proc/$pid/attr/ writes against file opener
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 008/116] perf intel-pt: Fix transaction abort handling Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 010/116] net: hso: fix control-request directions Greg Kroah-Hartman
` (110 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kees Cook, Linus Torvalds
From: Kees Cook <keescook@chromium.org>
commit bfb819ea20ce8bbeeba17e1a6418bf8bda91fc28 upstream.
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
[1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/proc/base.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2564,6 +2564,10 @@ static ssize_t proc_pid_attr_write(struc
void *page;
int rv;
+ /* A task may only write when it was the opener. */
+ if (file->f_cred != current_real_cred())
+ return -EPERM;
+
rcu_read_lock();
task = pid_task(proc_pid(inode), PIDTYPE_PID);
if (!task) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 010/116] net: hso: fix control-request directions
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 009/116] proc: Check /proc/$pid/attr/ writes against file opener Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 011/116] mac80211: assure all fragments are encrypted Greg Kroah-Hartman
` (109 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold, David S. Miller
From: Johan Hovold <johan@kernel.org>
commit 1a6e9a9c68c1f183872e4bcc947382111c2e04eb upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/hso.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1703,7 +1703,7 @@ static int hso_serial_tiocmset(struct tt
spin_unlock_irqrestore(&serial->serial_lock, flags);
return usb_control_msg(serial->parent->usb,
- usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
+ usb_sndctrlpipe(serial->parent->usb, 0), 0x22,
0x21, val, if_num, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
@@ -2450,7 +2450,7 @@ static int hso_rfkill_set_block(void *da
if (hso_dev->usb_gone)
rv = 0;
else
- rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
+ rv = usb_control_msg(hso_dev->usb, usb_sndctrlpipe(hso_dev->usb, 0),
enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
mutex_unlock(&hso_dev->mutex);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 011/116] mac80211: assure all fragments are encrypted
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 010/116] net: hso: fix control-request directions Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 012/116] mac80211: prevent mixed key and fragment cache attacks Greg Kroah-Hartman
` (108 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit 965a7d72e798eb7af0aa67210e37cf7ecd1c9cad upstream.
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c262315950b3eac491397@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2078,6 +2078,16 @@ ieee80211_reassemble_find(struct ieee802
return NULL;
}
+static bool requires_sequential_pn(struct ieee80211_rx_data *rx, __le16 fc)
+{
+ return rx->key &&
+ (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
+ ieee80211_has_protected(fc);
+}
+
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
{
@@ -2122,12 +2132,7 @@ ieee80211_rx_h_defragment(struct ieee802
/* This is the first fragment of a new frame. */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->seqno_idx, &(rx->skb));
- if (rx->key &&
- (rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP_256 ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP ||
- rx->key->conf.cipher == WLAN_CIPHER_SUITE_GCMP_256) &&
- ieee80211_has_protected(fc)) {
+ if (requires_sequential_pn(rx, fc)) {
int queue = rx->security_idx;
/* Store CCMP/GCMP PN so that we can verify that the
@@ -2169,11 +2174,7 @@ ieee80211_rx_h_defragment(struct ieee802
u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
int queue;
- if (!rx->key ||
- (rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP_256 &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP &&
- rx->key->conf.cipher != WLAN_CIPHER_SUITE_GCMP_256))
+ if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 012/116] mac80211: prevent mixed key and fragment cache attacks
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 011/116] mac80211: assure all fragments are encrypted Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 013/116] mac80211: properly handle A-MSDUs that start with an RFC 1042 header Greg Kroah-Hartman
` (107 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit 94034c40ab4a3fcf581fbc7f8fdf4e29943c4a24 upstream.
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/key.c | 7 +++++++
net/mac80211/key.h | 2 ++
net/mac80211/rx.c | 6 ++++++
4 files changed, 16 insertions(+)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -100,6 +100,7 @@ struct ieee80211_fragment_entry {
u8 rx_queue;
bool check_sequential_pn; /* needed for CCMP/GCMP */
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
+ unsigned int key_color;
};
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -653,6 +653,7 @@ int ieee80211_key_link(struct ieee80211_
struct ieee80211_sub_if_data *sdata,
struct sta_info *sta)
{
+ static atomic_t key_color = ATOMIC_INIT(0);
struct ieee80211_local *local = sdata->local;
struct ieee80211_key *old_key;
int idx = key->conf.keyidx;
@@ -688,6 +689,12 @@ int ieee80211_key_link(struct ieee80211_
key->sdata = sdata;
key->sta = sta;
+ /*
+ * Assign a unique ID to every key so we can easily prevent mixed
+ * key and fragment cache attacks.
+ */
+ key->color = atomic_inc_return(&key_color);
+
increment_tailroom_need_count(sdata);
ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -127,6 +127,8 @@ struct ieee80211_key {
} debugfs;
#endif
+ unsigned int color;
+
/*
* key config, must be last because it contains key
* material as variable length member
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2139,6 +2139,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
IEEE80211_CCMP_PN_LEN);
@@ -2176,6 +2177,11 @@ ieee80211_rx_h_defragment(struct ieee802
if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
+
+ /* Prevent mixed key and fragment cache attacks */
+ if (entry->key_color != rx->key->color)
+ return RX_DROP_UNUSABLE;
+
memcpy(pn, entry->last_pn, IEEE80211_CCMP_PN_LEN);
for (i = IEEE80211_CCMP_PN_LEN - 1; i >= 0; i--) {
pn[i]++;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 013/116] mac80211: properly handle A-MSDUs that start with an RFC 1042 header
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 012/116] mac80211: prevent mixed key and fragment cache attacks Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 014/116] cfg80211: mitigate A-MSDU aggregation attacks Greg Kroah-Hartman
` (106 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit a1d5ff5651ea592c67054233b14b30bf4452999c upstream.
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/cfg80211.h | 4 ++--
net/mac80211/rx.c | 2 +-
net/wireless/util.c | 4 ++--
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4605,7 +4605,7 @@ unsigned int ieee80211_get_mesh_hdrlen(s
*/
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
const u8 *addr, enum nl80211_iftype iftype,
- u8 data_offset);
+ u8 data_offset, bool is_amsdu);
/**
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -4617,7 +4617,7 @@ int ieee80211_data_to_8023_exthdr(struct
static inline int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype)
{
- return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0);
+ return ieee80211_data_to_8023_exthdr(skb, NULL, addr, iftype, 0, false);
}
/**
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2557,7 +2557,7 @@ __ieee80211_rx_h_amsdu(struct ieee80211_
if (ieee80211_data_to_8023_exthdr(skb, ðhdr,
rx->sdata->vif.addr,
rx->sdata->vif.type,
- data_offset))
+ data_offset, true))
return RX_DROP_UNUSABLE;
ieee80211_amsdu_to_8023s(skb, &frame_list, dev->dev_addr,
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -422,7 +422,7 @@ EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen)
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
const u8 *addr, enum nl80211_iftype iftype,
- u8 data_offset)
+ u8 data_offset, bool is_amsdu)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct {
@@ -510,7 +510,7 @@ int ieee80211_data_to_8023_exthdr(struct
skb_copy_bits(skb, hdrlen, &payload, sizeof(payload));
tmp.h_proto = payload.proto;
- if (likely((ether_addr_equal(payload.hdr, rfc1042_header) &&
+ if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) &&
tmp.h_proto != htons(ETH_P_AARP) &&
tmp.h_proto != htons(ETH_P_IPX)) ||
ether_addr_equal(payload.hdr, bridge_tunnel_header)))
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 014/116] cfg80211: mitigate A-MSDU aggregation attacks
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 013/116] mac80211: properly handle A-MSDUs that start with an RFC 1042 header Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 015/116] mac80211: drop A-MSDUs on old ciphers Greg Kroah-Hartman
` (105 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathy Vanhoef, Johannes Berg
From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
commit 2b8a1fee3488c602aca8bea004a087e60806a5cf upstream.
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/util.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -652,6 +652,9 @@ void ieee80211_amsdu_to_8023s(struct sk_
remaining = skb->len - offset;
if (subframe_len > remaining)
goto purge;
+ /* mitigate A-MSDU aggregation injection attacks */
+ if (ether_addr_equal(eth.h_dest, rfc1042_header))
+ goto purge;
offset += sizeof(struct ethhdr);
last = remaining <= subframe_len + padding;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 015/116] mac80211: drop A-MSDUs on old ciphers
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 014/116] cfg80211: mitigate A-MSDU aggregation attacks Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 016/116] mac80211: add fragment cache to sta_info Greg Kroah-Hartman
` (104 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit 270032a2a9c4535799736142e1e7c413ca7b836e upstream.
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.076543300172.I548e6e71f1ee9cad4b9a37bf212ae7db723587aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -5,7 +5,7 @@
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -2614,6 +2614,23 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx
if (is_multicast_ether_addr(hdr->addr1))
return RX_DROP_UNUSABLE;
+ if (rx->key) {
+ /*
+ * We should not receive A-MSDUs on pre-HT connections,
+ * and HT connections cannot use old ciphers. Thus drop
+ * them, as in those cases we couldn't even have SPP
+ * A-MSDUs or such.
+ */
+ switch (rx->key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
+ return RX_DROP_UNUSABLE;
+ default:
+ break;
+ }
+ }
+
return __ieee80211_rx_h_amsdu(rx, 0);
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 016/116] mac80211: add fragment cache to sta_info
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 015/116] mac80211: drop A-MSDUs on old ciphers Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 017/116] mac80211: check defrag PN against current frame Greg Kroah-Hartman
` (103 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit 3a11ce08c45b50d69c891d71760b7c5b92074709 upstream.
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.fc35046b0d52.I1ef101e3784d13e8f6600d83de7ec9a3a45bcd52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/ieee80211_i.h | 26 ++++----------------------
net/mac80211/iface.c | 11 +++--------
net/mac80211/rx.c | 41 ++++++++++++++++++++++++++++++-----------
net/mac80211/sta_info.c | 6 +++++-
net/mac80211/sta_info.h | 31 +++++++++++++++++++++++++++++++
5 files changed, 73 insertions(+), 42 deletions(-)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -53,12 +53,6 @@ struct ieee80211_local;
#define IEEE80211_ENCRYPT_HEADROOM 8
#define IEEE80211_ENCRYPT_TAILROOM 18
-/* IEEE 802.11 (Ch. 9.5 Defragmentation) requires support for concurrent
- * reception of at least three fragmented frames. This limit can be increased
- * by changing this define, at the cost of slower frame reassembly and
- * increased memory use (about 2 kB of RAM per entry). */
-#define IEEE80211_FRAGMENT_MAX 4
-
/* power level hasn't been configured (or set to automatic) */
#define IEEE80211_UNSET_POWER_LEVEL INT_MIN
@@ -91,19 +85,6 @@ extern const u8 ieee80211_ac_to_qos_mask
#define IEEE80211_MAX_NAN_INSTANCE_ID 255
-struct ieee80211_fragment_entry {
- struct sk_buff_head skb_list;
- unsigned long first_frag_time;
- u16 seq;
- u16 extra_len;
- u16 last_frag;
- u8 rx_queue;
- bool check_sequential_pn; /* needed for CCMP/GCMP */
- u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
- unsigned int key_color;
-};
-
-
struct ieee80211_bss {
u32 device_ts_beacon, device_ts_presp;
@@ -885,9 +866,7 @@ struct ieee80211_sub_if_data {
char name[IFNAMSIZ];
- /* Fragment table for host-based reassembly */
- struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
- unsigned int fragment_next;
+ struct ieee80211_fragment_cache frags;
/* TID bitmap for NoAck policy */
u16 noack_map;
@@ -2205,4 +2184,7 @@ extern const struct ethtool_ops ieee8021
#define debug_noinline
#endif
+void ieee80211_init_frag_cache(struct ieee80211_fragment_cache *cache);
+void ieee80211_destroy_frag_cache(struct ieee80211_fragment_cache *cache);
+
#endif /* IEEE80211_I_H */
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -7,7 +7,7 @@
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (c) 2016 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -1111,16 +1111,12 @@ static void ieee80211_set_multicast_list
*/
static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata)
{
- int i;
-
/* free extra data */
ieee80211_free_keys(sdata, false);
ieee80211_debugfs_remove_netdev(sdata);
- for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
- __skb_queue_purge(&sdata->fragments[i].skb_list);
- sdata->fragment_next = 0;
+ ieee80211_destroy_frag_cache(&sdata->frags);
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_teardown_sdata(sdata);
@@ -1832,8 +1828,7 @@ int ieee80211_if_add(struct ieee80211_lo
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
- for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
- skb_queue_head_init(&sdata->fragments[i].skb_list);
+ ieee80211_init_frag_cache(&sdata->frags);
INIT_LIST_HEAD(&sdata->key_list);
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2009,19 +2009,34 @@ ieee80211_rx_h_decrypt(struct ieee80211_
return result;
}
+void ieee80211_init_frag_cache(struct ieee80211_fragment_cache *cache)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache->entries); i++)
+ skb_queue_head_init(&cache->entries[i].skb_list);
+}
+
+void ieee80211_destroy_frag_cache(struct ieee80211_fragment_cache *cache)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cache->entries); i++)
+ __skb_queue_purge(&cache->entries[i].skb_list);
+}
+
static inline struct ieee80211_fragment_entry *
-ieee80211_reassemble_add(struct ieee80211_sub_if_data *sdata,
+ieee80211_reassemble_add(struct ieee80211_fragment_cache *cache,
unsigned int frag, unsigned int seq, int rx_queue,
struct sk_buff **skb)
{
struct ieee80211_fragment_entry *entry;
- entry = &sdata->fragments[sdata->fragment_next++];
- if (sdata->fragment_next >= IEEE80211_FRAGMENT_MAX)
- sdata->fragment_next = 0;
+ entry = &cache->entries[cache->next++];
+ if (cache->next >= IEEE80211_FRAGMENT_MAX)
+ cache->next = 0;
- if (!skb_queue_empty(&entry->skb_list))
- __skb_queue_purge(&entry->skb_list);
+ __skb_queue_purge(&entry->skb_list);
__skb_queue_tail(&entry->skb_list, *skb); /* no need for locking */
*skb = NULL;
@@ -2036,14 +2051,14 @@ ieee80211_reassemble_add(struct ieee8021
}
static inline struct ieee80211_fragment_entry *
-ieee80211_reassemble_find(struct ieee80211_sub_if_data *sdata,
+ieee80211_reassemble_find(struct ieee80211_fragment_cache *cache,
unsigned int frag, unsigned int seq,
int rx_queue, struct ieee80211_hdr *hdr)
{
struct ieee80211_fragment_entry *entry;
int i, idx;
- idx = sdata->fragment_next;
+ idx = cache->next;
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++) {
struct ieee80211_hdr *f_hdr;
@@ -2051,7 +2066,7 @@ ieee80211_reassemble_find(struct ieee802
if (idx < 0)
idx = IEEE80211_FRAGMENT_MAX - 1;
- entry = &sdata->fragments[idx];
+ entry = &cache->entries[idx];
if (skb_queue_empty(&entry->skb_list) || entry->seq != seq ||
entry->rx_queue != rx_queue ||
entry->last_frag + 1 != frag)
@@ -2091,6 +2106,7 @@ static bool requires_sequential_pn(struc
static ieee80211_rx_result debug_noinline
ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
{
+ struct ieee80211_fragment_cache *cache = &rx->sdata->frags;
struct ieee80211_hdr *hdr;
u16 sc;
__le16 fc;
@@ -2112,6 +2128,9 @@ ieee80211_rx_h_defragment(struct ieee802
goto out_no_led;
}
+ if (rx->sta)
+ cache = &rx->sta->frags;
+
if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
goto out;
@@ -2130,7 +2149,7 @@ ieee80211_rx_h_defragment(struct ieee802
if (frag == 0) {
/* This is the first fragment of a new frame. */
- entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
+ entry = ieee80211_reassemble_add(cache, frag, seq,
rx->seqno_idx, &(rx->skb));
if (requires_sequential_pn(rx, fc)) {
int queue = rx->security_idx;
@@ -2158,7 +2177,7 @@ ieee80211_rx_h_defragment(struct ieee802
/* This is a fragment for a frame that should already be pending in
* fragment cache. Add this fragment to the end of the pending entry.
*/
- entry = ieee80211_reassemble_find(rx->sdata, frag, seq,
+ entry = ieee80211_reassemble_find(cache, frag, seq,
rx->seqno_idx, hdr);
if (!entry) {
I802_DEBUG_INC(rx->local->rx_handlers_drop_defrag);
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -3,7 +3,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -369,6 +369,8 @@ struct sta_info *sta_info_alloc(struct i
u64_stats_init(&sta->rx_stats.syncp);
+ ieee80211_init_frag_cache(&sta->frags);
+
sta->sta_state = IEEE80211_STA_NONE;
/* Mark TID as unreserved */
@@ -1032,6 +1034,8 @@ static void __sta_info_destroy_part2(str
rate_control_remove_sta_debugfs(sta);
ieee80211_sta_debugfs_remove(sta);
+ ieee80211_destroy_frag_cache(&sta->frags);
+
cleanup_single_sta(sta);
}
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -2,6 +2,7 @@
* Copyright 2002-2005, Devicescape Software, Inc.
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright(c) 2015-2017 Intel Deutschland GmbH
+ * Copyright(c) 2020-2021 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -412,6 +413,33 @@ struct ieee80211_sta_rx_stats {
};
/*
+ * IEEE 802.11-2016 (10.6 "Defragmentation") recommends support for "concurrent
+ * reception of at least one MSDU per access category per associated STA"
+ * on APs, or "at least one MSDU per access category" on other interface types.
+ *
+ * This limit can be increased by changing this define, at the cost of slower
+ * frame reassembly and increased memory use while fragments are pending.
+ */
+#define IEEE80211_FRAGMENT_MAX 4
+
+struct ieee80211_fragment_entry {
+ struct sk_buff_head skb_list;
+ unsigned long first_frag_time;
+ u16 seq;
+ u16 extra_len;
+ u16 last_frag;
+ u8 rx_queue;
+ bool check_sequential_pn; /* needed for CCMP/GCMP */
+ u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
+ unsigned int key_color;
+};
+
+struct ieee80211_fragment_cache {
+ struct ieee80211_fragment_entry entries[IEEE80211_FRAGMENT_MAX];
+ unsigned int next;
+};
+
+/*
* The bandwidth threshold below which the per-station CoDel parameters will be
* scaled to be more lenient (to prevent starvation of slow stations). This
* value will be scaled by the number of active stations when it is being
@@ -482,6 +510,7 @@ struct ieee80211_sta_rx_stats {
* @pcpu_rx_stats: per-CPU RX statistics, assigned only if the driver needs
* this (by advertising the USES_RSS hw flag)
* @status_stats: TX status statistics
+ * @frags: fragment cache
*/
struct sta_info {
/* General information, mostly static */
@@ -583,6 +612,8 @@ struct sta_info {
struct cfg80211_chan_def tdls_chandef;
+ struct ieee80211_fragment_cache frags;
+
/* keep last! */
struct ieee80211_sta sta;
};
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 017/116] mac80211: check defrag PN against current frame
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 016/116] mac80211: add fragment cache to sta_info Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 018/116] mac80211: prevent attacks on TKIP/WEP as well Greg Kroah-Hartman
` (102 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit bf30ca922a0c0176007e074b0acc77ed345e9990 upstream.
As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df90bb0e3fd55930bc8a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/ieee80211_i.h | 11 +++++++++--
net/mac80211/rx.c | 5 ++---
net/mac80211/wpa.c | 13 +++++++++----
3 files changed, 20 insertions(+), 9 deletions(-)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -225,8 +225,15 @@ struct ieee80211_rx_data {
*/
int security_idx;
- u32 tkip_iv32;
- u16 tkip_iv16;
+ union {
+ struct {
+ u32 iv32;
+ u16 iv16;
+ } tkip;
+ struct {
+ u8 pn[IEEE80211_CCMP_PN_LEN];
+ } ccm_gcm;
+ };
};
struct ieee80211_csa_settings {
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2192,7 +2192,6 @@ ieee80211_rx_h_defragment(struct ieee802
if (entry->check_sequential_pn) {
int i;
u8 pn[IEEE80211_CCMP_PN_LEN], *rpn;
- int queue;
if (!requires_sequential_pn(rx, fc))
return RX_DROP_UNUSABLE;
@@ -2207,8 +2206,8 @@ ieee80211_rx_h_defragment(struct ieee802
if (pn[i])
break;
}
- queue = rx->security_idx;
- rpn = rx->key->u.ccmp.rx_pn[queue];
+
+ rpn = rx->ccm_gcm.pn;
if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -2,6 +2,7 @@
* Copyright 2002-2004, Instant802 Networks, Inc.
* Copyright 2008, Jouni Malinen <j@w1.fi>
* Copyright (C) 2016-2017 Intel Deutschland GmbH
+ * Copyright (C) 2020-2021 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -170,8 +171,8 @@ ieee80211_rx_h_michael_mic_verify(struct
update_iv:
/* update IV in key information to be able to detect replays */
- rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip_iv32;
- rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip_iv16;
+ rx->key->u.tkip.rx[rx->security_idx].iv32 = rx->tkip.iv32;
+ rx->key->u.tkip.rx[rx->security_idx].iv16 = rx->tkip.iv16;
return RX_CONTINUE;
@@ -297,8 +298,8 @@ ieee80211_crypto_tkip_decrypt(struct iee
key, skb->data + hdrlen,
skb->len - hdrlen, rx->sta->sta.addr,
hdr->addr1, hwaccel, rx->security_idx,
- &rx->tkip_iv32,
- &rx->tkip_iv16);
+ &rx->tkip.iv32,
+ &rx->tkip.iv16);
if (res != TKIP_DECRYPT_OK)
return RX_DROP_UNUSABLE;
@@ -556,6 +557,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
}
memcpy(key->u.ccmp.rx_pn[queue], pn, IEEE80211_CCMP_PN_LEN);
+ if (unlikely(ieee80211_is_frag(hdr)))
+ memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN);
}
/* Remove CCMP header and MIC */
@@ -784,6 +787,8 @@ ieee80211_crypto_gcmp_decrypt(struct iee
}
memcpy(key->u.gcmp.rx_pn[queue], pn, IEEE80211_GCMP_PN_LEN);
+ if (unlikely(ieee80211_is_frag(hdr)))
+ memcpy(rx->ccm_gcm.pn, pn, IEEE80211_CCMP_PN_LEN);
}
/* Remove GCMP header and MIC */
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 018/116] mac80211: prevent attacks on TKIP/WEP as well
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 017/116] mac80211: check defrag PN against current frame Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 019/116] mac80211: do not accept/forward invalid EAPOL frames Greg Kroah-Hartman
` (101 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit 7e44a0b597f04e67eee8cdcbe7ee706c6f5de38b upstream.
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.430e8c202313.Ia37e4e5b6b3eaab1a5ae050e015f6c92859dbe27@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 12 ++++++++++++
net/mac80211/sta_info.h | 3 ++-
2 files changed, 14 insertions(+), 1 deletion(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2158,6 +2158,7 @@ ieee80211_rx_h_defragment(struct ieee802
* next fragment has a sequential PN value.
*/
entry->check_sequential_pn = true;
+ entry->is_protected = true;
entry->key_color = rx->key->color;
memcpy(entry->last_pn,
rx->key->u.ccmp.rx_pn[queue],
@@ -2170,6 +2171,9 @@ ieee80211_rx_h_defragment(struct ieee802
sizeof(rx->key->u.gcmp.rx_pn[queue]));
BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
IEEE80211_GCMP_PN_LEN);
+ } else if (rx->key && ieee80211_has_protected(fc)) {
+ entry->is_protected = true;
+ entry->key_color = rx->key->color;
}
return RX_QUEUED;
}
@@ -2211,6 +2215,14 @@ ieee80211_rx_h_defragment(struct ieee802
if (memcmp(pn, rpn, IEEE80211_CCMP_PN_LEN))
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
+ } else if (entry->is_protected &&
+ (!rx->key || !ieee80211_has_protected(fc) ||
+ rx->key->color != entry->key_color)) {
+ /* Drop this as a mixed key or fragment cache attack, even
+ * if for TKIP Michael MIC should protect us, and WEP is a
+ * lost cause anyway.
+ */
+ return RX_DROP_UNUSABLE;
}
skb_pull(rx->skb, ieee80211_hdrlen(fc));
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -429,7 +429,8 @@ struct ieee80211_fragment_entry {
u16 extra_len;
u16 last_frag;
u8 rx_queue;
- bool check_sequential_pn; /* needed for CCMP/GCMP */
+ u8 check_sequential_pn:1, /* needed for CCMP/GCMP */
+ is_protected:1;
u8 last_pn[6]; /* PN of the last fragment if CCMP was used */
unsigned int key_color;
};
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 019/116] mac80211: do not accept/forward invalid EAPOL frames
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 018/116] mac80211: prevent attacks on TKIP/WEP as well Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 020/116] mac80211: extend protection against mixed key and fragment cache attacks Greg Kroah-Hartman
` (100 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jouni Malinen, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit a8c4d76a8dd4fb9666fc8919a703d85fb8f44ed8 upstream.
EAPOL frames are used for authentication and key management between the
AP and each individual STA associated in the BSS. Those frames are not
supposed to be sent by one associated STA to another associated STA
(either unicast for broadcast/multicast).
Similarly, in 802.11 they're supposed to be sent to the authenticator
(AP) address.
Since it is possible for unexpected EAPOL frames to result in misbehavior
in supplicant implementations, it is better for the AP to not allow such
cases to be forwarded to other clients either directly, or indirectly if
the AP interface is part of a bridge.
Accept EAPOL (control port) frames only if they're transmitted to the
own address, or, due to interoperability concerns, to the PAE group
address.
Disable forwarding of EAPOL (or well, the configured control port
protocol) frames back to wireless medium in all cases. Previously, these
frames were accepted from fully authenticated and authorized stations
and also from unauthenticated stations for one of the cases.
Additionally, to avoid forwarding by the bridge, rewrite the PAE group
address case to the local MAC address.
Cc: stable@vger.kernel.org
Co-developed-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.cb327ed0cabe.Ib7dcffa2a31f0913d660de65ba3c8aca75b1d10f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 33 +++++++++++++++++++++++++++------
1 file changed, 27 insertions(+), 6 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2408,13 +2408,13 @@ static bool ieee80211_frame_allowed(stru
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
/*
- * Allow EAPOL frames to us/the PAE group address regardless
- * of whether the frame was encrypted or not.
+ * Allow EAPOL frames to us/the PAE group address regardless of
+ * whether the frame was encrypted or not, and always disallow
+ * all other destination addresses for them.
*/
- if (ehdr->h_proto == rx->sdata->control_port_protocol &&
- (ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
- ether_addr_equal(ehdr->h_dest, pae_group_addr)))
- return true;
+ if (unlikely(ehdr->h_proto == rx->sdata->control_port_protocol))
+ return ether_addr_equal(ehdr->h_dest, rx->sdata->vif.addr) ||
+ ether_addr_equal(ehdr->h_dest, pae_group_addr);
if (ieee80211_802_1x_port_control(rx) ||
ieee80211_drop_unencrypted(rx, fc))
@@ -2438,8 +2438,28 @@ static void ieee80211_deliver_skb_to_loc
cfg80211_rx_control_port(dev, skb, noencrypt);
dev_kfree_skb(skb);
} else {
+ struct ethhdr *ehdr = (void *)skb_mac_header(skb);
+
memset(skb->cb, 0, sizeof(skb->cb));
+ /*
+ * 802.1X over 802.11 requires that the authenticator address
+ * be used for EAPOL frames. However, 802.1X allows the use of
+ * the PAE group address instead. If the interface is part of
+ * a bridge and we pass the frame with the PAE group address,
+ * then the bridge will forward it to the network (even if the
+ * client was not associated yet), which isn't supposed to
+ * happen.
+ * To avoid that, rewrite the destination address to our own
+ * address, so that the authenticator (e.g. hostapd) will see
+ * the frame, but bridge won't forward it anywhere else. Note
+ * that due to earlier filtering, the only other address can
+ * be the PAE group address.
+ */
+ if (unlikely(skb->protocol == sdata->control_port_protocol &&
+ !ether_addr_equal(ehdr->h_dest, sdata->vif.addr)))
+ ether_addr_copy(ehdr->h_dest, sdata->vif.addr);
+
/* deliver to local stack */
if (rx->napi)
napi_gro_receive(rx->napi, skb);
@@ -2479,6 +2499,7 @@ ieee80211_deliver_skb(struct ieee80211_r
if ((sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
!(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
+ ehdr->h_proto != rx->sdata->control_port_protocol &&
(sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) {
if (is_multicast_ether_addr(ehdr->h_dest) &&
ieee80211_vif_get_num_mcast_if(sdata) != 0) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 020/116] mac80211: extend protection against mixed key and fragment cache attacks
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 019/116] mac80211: do not accept/forward invalid EAPOL frames Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 021/116] ath10k: Validate first subframe of A-MSDU before processing the list Greg Kroah-Hartman
` (99 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Wen Gong, Jouni Malinen, Johannes Berg
From: Wen Gong <wgong@codeaurora.org>
commit 3edc6b0d6c061a70d8ca3c3c72eb1f58ce29bfb1 upstream.
For some chips/drivers, e.g., QCA6174 with ath10k, the decryption is
done by the hardware, and the Protected bit in the Frame Control field
is cleared in the lower level driver before the frame is passed to
mac80211. In such cases, the condition for ieee80211_has_protected() is
not met in ieee80211_rx_h_defragment() of mac80211 and the new security
validation steps are not executed.
Extend mac80211 to cover the case where the Protected bit has been
cleared, but the frame is indicated as having been decrypted by the
hardware. This extends protection against mixed key and fragment cache
attack for additional drivers/chips. This fixes CVE-2020-24586 and
CVE-2020-24587 for such cases.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.037aa5ca0390.I7bb888e2965a0db02a67075fcb5deb50eb7408aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/rx.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2113,6 +2113,7 @@ ieee80211_rx_h_defragment(struct ieee802
unsigned int frag, seq;
struct ieee80211_fragment_entry *entry;
struct sk_buff *skb;
+ struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
hdr = (struct ieee80211_hdr *)rx->skb->data;
fc = hdr->frame_control;
@@ -2171,7 +2172,9 @@ ieee80211_rx_h_defragment(struct ieee802
sizeof(rx->key->u.gcmp.rx_pn[queue]));
BUILD_BUG_ON(IEEE80211_CCMP_PN_LEN !=
IEEE80211_GCMP_PN_LEN);
- } else if (rx->key && ieee80211_has_protected(fc)) {
+ } else if (rx->key &&
+ (ieee80211_has_protected(fc) ||
+ (status->flag & RX_FLAG_DECRYPTED))) {
entry->is_protected = true;
entry->key_color = rx->key->color;
}
@@ -2216,13 +2219,19 @@ ieee80211_rx_h_defragment(struct ieee802
return RX_DROP_UNUSABLE;
memcpy(entry->last_pn, pn, IEEE80211_CCMP_PN_LEN);
} else if (entry->is_protected &&
- (!rx->key || !ieee80211_has_protected(fc) ||
+ (!rx->key ||
+ (!ieee80211_has_protected(fc) &&
+ !(status->flag & RX_FLAG_DECRYPTED)) ||
rx->key->color != entry->key_color)) {
/* Drop this as a mixed key or fragment cache attack, even
* if for TKIP Michael MIC should protect us, and WEP is a
* lost cause anyway.
*/
return RX_DROP_UNUSABLE;
+ } else if (entry->is_protected && rx->key &&
+ entry->key_color != rx->key->color &&
+ (status->flag & RX_FLAG_DECRYPTED)) {
+ return RX_DROP_UNUSABLE;
}
skb_pull(rx->skb, ieee80211_hdrlen(fc));
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 021/116] ath10k: Validate first subframe of A-MSDU before processing the list
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 020/116] mac80211: extend protection against mixed key and fragment cache attacks Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 022/116] dm snapshot: properly fix a crash when an origin has no snapshots Greg Kroah-Hartman
` (98 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sriram R, Jouni Malinen, Johannes Berg
From: Sriram R <srirrama@codeaurora.org>
commit 62a8ff67eba52dae9b107e1fb8827054ed00a265 upstream.
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 61 ++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1769,14 +1769,62 @@ static void ath10k_htt_rx_h_unchain(stru
ath10k_unchain_msdu(amsdu, unchain_cnt);
}
+static bool ath10k_htt_rx_validate_amsdu(struct ath10k *ar,
+ struct sk_buff_head *amsdu)
+{
+ u8 *subframe_hdr;
+ struct sk_buff *first;
+ bool is_first, is_last;
+ struct htt_rx_desc *rxd;
+ struct ieee80211_hdr *hdr;
+ size_t hdr_len, crypto_len;
+ enum htt_rx_mpdu_encrypt_type enctype;
+ int bytes_aligned = ar->hw_params.decap_align_bytes;
+
+ first = skb_peek(amsdu);
+
+ rxd = (void *)first->data - sizeof(*rxd);
+ hdr = (void *)rxd->rx_hdr_status;
+
+ is_first = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU));
+ is_last = !!(rxd->msdu_end.common.info0 &
+ __cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU));
+
+ /* Return in case of non-aggregated msdu */
+ if (is_first && is_last)
+ return true;
+
+ /* First msdu flag is not set for the first msdu of the list */
+ if (!is_first)
+ return false;
+
+ enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
+ RX_MPDU_START_INFO0_ENCRYPT_TYPE);
+
+ hdr_len = ieee80211_hdrlen(hdr->frame_control);
+ crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
+
+ subframe_hdr = (u8 *)hdr + round_up(hdr_len, bytes_aligned) +
+ crypto_len;
+
+ /* Validate if the amsdu has a proper first subframe.
+ * There are chances a single msdu can be received as amsdu when
+ * the unauthenticated amsdu flag of a QoS header
+ * gets flipped in non-SPP AMSDU's, in such cases the first
+ * subframe has llc/snap header in place of a valid da.
+ * return false if the da matches rfc1042 pattern
+ */
+ if (ether_addr_equal(subframe_hdr, rfc1042_header))
+ return false;
+
+ return true;
+}
+
static bool ath10k_htt_rx_amsdu_allowed(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *rx_status)
{
- /* FIXME: It might be a good idea to do some fuzzy-testing to drop
- * invalid/dangerous frames.
- */
-
if (!rx_status->freq) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "no channel configured; ignoring frame(s)!\n");
return false;
@@ -1787,6 +1835,11 @@ static bool ath10k_htt_rx_amsdu_allowed(
return false;
}
+ if (!ath10k_htt_rx_validate_amsdu(ar, amsdu)) {
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "invalid amsdu received\n");
+ return false;
+ }
+
return true;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 022/116] dm snapshot: properly fix a crash when an origin has no snapshots
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 021/116] ath10k: Validate first subframe of A-MSDU before processing the list Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 023/116] kgdb: fix gcc-11 warnings harder Greg Kroah-Hartman
` (97 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 7e768532b2396bcb7fbf6f82384b85c0f1d2f197 upstream.
If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().
Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-snap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -794,7 +794,7 @@ static int dm_add_exception(void *contex
static uint32_t __minimum_chunk_size(struct origin *o)
{
struct dm_snapshot *snap;
- unsigned chunk_size = 0;
+ unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
if (o)
list_for_each_entry(snap, &o->snapshots, list)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 023/116] kgdb: fix gcc-11 warnings harder
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 022/116] dm snapshot: properly fix a crash when an origin has no snapshots Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 024/116] misc/uss720: fix memory leak in uss720_probe Greg Kroah-Hartman
` (96 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Daniel Thompson, Jason Wessel
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bda7d3ab06f19c02dcef61fefcb9dd954dfd5e4f upstream.
40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 40cc3a80bb42 ("kgdb: fix gcc-11 warning on indentation")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: https://lore.kernel.org/r/20210520130839.51987-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/kgdbts.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -112,8 +112,9 @@
printk(KERN_INFO a); \
} while (0)
#define v2printk(a...) do { \
- if (verbose > 1) \
+ if (verbose > 1) { \
printk(KERN_INFO a); \
+ } \
touch_nmi_watchdog(); \
} while (0)
#define eprintk(a...) do { \
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 024/116] misc/uss720: fix memory leak in uss720_probe
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 023/116] kgdb: fix gcc-11 warnings harder Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 025/116] thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue Greg Kroah-Hartman
` (95 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+636c58f40a86b4a879e7, Dongliang Mu
From: Dongliang Mu <mudongliangabcd@gmail.com>
commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/uss720.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -736,6 +736,7 @@ static int uss720_probe(struct usb_inter
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
+ usb_put_dev(usbdev);
return 0;
probe_abort:
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 025/116] thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 024/116] misc/uss720: fix memory leak in uss720_probe Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 026/116] mei: request autosuspend after sending rx flow control Greg Kroah-Hartman
` (94 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman, Mika Westerberg
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit b106776080a1cf953a1b2fd50cb2a995db4732be upstream.
Up to 64 bytes of data can be read from NVM in one go. Read address
must be dword aligned. Data is read into a local buffer.
If caller asks to read data starting at an unaligned address then full
dword is anyway read from NVM into a local buffer. Data is then copied
from the local buffer starting at the unaligned offset to the caller
buffer.
In cases where asked data length + unaligned offset is over 64 bytes
we need to make sure we don't read past the 64 bytes in the local
buffer when copying to caller buffer, and make sure that we don't
skip copying unaligned offset bytes from local buffer anymore after
the first round of 64 byte NVM data read.
Fixes: 3e13676862f9 ("thunderbolt: Add support for DMA configuration based mailbox")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/dma_port.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/thunderbolt/dma_port.c
+++ b/drivers/thunderbolt/dma_port.c
@@ -367,15 +367,15 @@ int dma_port_flash_read(struct tb_dma_po
void *buf, size_t size)
{
unsigned int retries = DMA_PORT_RETRIES;
- unsigned int offset;
-
- offset = address & 3;
- address = address & ~3;
do {
- u32 nbytes = min_t(u32, size, MAIL_DATA_DWORDS * 4);
+ unsigned int offset;
+ size_t nbytes;
int ret;
+ offset = address & 3;
+ nbytes = min_t(size_t, size + offset, MAIL_DATA_DWORDS * 4);
+
ret = dma_port_flash_read_block(dma, address, dma->buf,
ALIGN(nbytes, 4));
if (ret) {
@@ -387,6 +387,7 @@ int dma_port_flash_read(struct tb_dma_po
return ret;
}
+ nbytes -= offset;
memcpy(buf, dma->buf + offset, nbytes);
size -= nbytes;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 026/116] mei: request autosuspend after sending rx flow control
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 025/116] thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 027/116] staging: iio: cdc: ad7746: avoid overwrite of num_channels Greg Kroah-Hartman
` (93 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Usyskin, Tomas Winkler
From: Alexander Usyskin <alexander.usyskin@intel.com>
commit bbf0a94744edfeee298e4a9ab6fd694d639a5cdf upstream.
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/misc/mei/interrupt.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -224,6 +224,9 @@ static int mei_cl_irq_read(struct mei_cl
return ret;
}
+ pm_runtime_mark_last_busy(dev->dev);
+ pm_request_autosuspend(dev->dev);
+
list_move_tail(&cb->list, &cl->rd_pending);
return 0;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 027/116] staging: iio: cdc: ad7746: avoid overwrite of num_channels
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 026/116] mei: request autosuspend after sending rx flow control Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 028/116] iio: adc: ad7793: Add missing error code in ad7793_setup() Greg Kroah-Hartman
` (92 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lucas Stankus, Jonathan Cameron, Stable
From: Lucas Stankus <lucas.p.stankus@gmail.com>
commit 04f5b9f539ce314f758d919a14dc7a669f3b7838 upstream.
AD7745 devices don't have the CIN2 pins and therefore can't handle related
channels. Forcing the number of AD7746 channels may lead to enabling more
channels than what the hardware actually supports.
Avoid num_channels being overwritten after first assignment.
Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Fixes: 83e416f458d53 ("staging: iio: adc: Replace, rewrite ad7745 from scratch.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/iio/cdc/ad7746.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -703,7 +703,6 @@ static int ad7746_probe(struct i2c_clien
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
else
indio_dev->num_channels = ARRAY_SIZE(ad7746_channels) - 2;
- indio_dev->num_channels = ARRAY_SIZE(ad7746_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
if (pdata) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 028/116] iio: adc: ad7793: Add missing error code in ad7793_setup()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 027/116] staging: iio: cdc: ad7746: avoid overwrite of num_channels Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 029/116] USB: trancevibrator: fix control-request direction Greg Kroah-Hartman
` (91 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, YueHaibing, Stable, Jonathan Cameron
From: YueHaibing <yuehaibing@huawei.com>
commit 4ed243b1da169bcbc1ec5507867e56250c5f1ff9 upstream.
Set error code while device ID query failed.
Fixes: 88bc30548aae ("IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad7793.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -279,6 +279,7 @@ static int ad7793_setup(struct iio_dev *
id &= AD7793_ID_MASK;
if (id != st->chip_info->id) {
+ ret = -ENODEV;
dev_err(&st->sd.spi->dev, "device ID query failed\n");
goto out;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 029/116] USB: trancevibrator: fix control-request direction
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 028/116] iio: adc: ad7793: Add missing error code in ad7793_setup() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 030/116] USB: usbfs: Dont WARN about excessively large memory allocations Greg Kroah-Hartman
` (90 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 746e4acf87bcacf1406e05ef24a0b7139147c63e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: stable@vger.kernel.org # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/trancevibrator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -59,9 +59,9 @@ static ssize_t speed_store(struct device
/* Set speed */
retval = usb_control_msg(tv->udev, usb_sndctrlpipe(tv->udev, 0),
0x01, /* vendor request: set speed */
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
tv->speed, /* speed value */
- 0, NULL, 0, USB_CTRL_GET_TIMEOUT);
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval) {
tv->speed = old;
dev_dbg(&tv->udev->dev, "retval = %d\n", retval);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 030/116] USB: usbfs: Dont WARN about excessively large memory allocations
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 029/116] USB: trancevibrator: fix control-request direction Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 031/116] serial: sh-sci: Fix off-by-one error in FIFO threshold register setting Greg Kroah-Hartman
` (89 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrew Morton, Alan Stern,
syzbot+882a85c0c8ec4a3e2281
From: Alan Stern <stern@rowland.harvard.edu>
commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream.
Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large. This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.
In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc calls
for these buffers.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/devio.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1189,7 +1189,12 @@ static int proc_bulk(struct usb_dev_stat
ret = usbfs_increase_memory_usage(len1 + sizeof(struct urb));
if (ret)
return ret;
- tbuf = kmalloc(len1, GFP_KERNEL);
+
+ /*
+ * len1 can be almost arbitrarily large. Don't WARN if it's
+ * too big, just fail the request.
+ */
+ tbuf = kmalloc(len1, GFP_KERNEL | __GFP_NOWARN);
if (!tbuf) {
ret = -ENOMEM;
goto done;
@@ -1631,7 +1636,7 @@ static int proc_do_submiturb(struct usb_
if (num_sgs) {
as->urb->sg = kmalloc_array(num_sgs,
sizeof(struct scatterlist),
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (!as->urb->sg) {
ret = -ENOMEM;
goto error;
@@ -1666,7 +1671,7 @@ static int proc_do_submiturb(struct usb_
(uurb_start - as->usbm->vm_start);
} else {
as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
- GFP_KERNEL);
+ GFP_KERNEL | __GFP_NOWARN);
if (!as->urb->transfer_buffer) {
ret = -ENOMEM;
goto error;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 031/116] serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 030/116] USB: usbfs: Dont WARN about excessively large memory allocations Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 032/116] serial: rp2: use request_firmware instead of request_firmware_nowait Greg Kroah-Hartman
` (88 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Linh Phung, Wolfram Sang,
Ulrich Hecht, Geert Uytterhoeven
From: Geert Uytterhoeven <geert+renesas@glider.be>
commit 2ea2e019c190ee3973ef7bcaf829d8762e56e635 upstream.
The Receive FIFO Data Count Trigger field (RTRG[6:0]) in the Receive
FIFO Data Count Trigger Register (HSRTRGR) of HSCIF can only hold values
ranging from 0-127. As the FIFO size is equal to 128 on HSCIF, the user
can write an out-of-range value, touching reserved bits.
Fix this by limiting the trigger value to the FIFO size minus one.
Reverse the order of the checks, to avoid rx_trig becoming zero if the
FIFO size is one.
Note that this change has no impact on other SCIF variants, as their
maximum supported trigger value is lower than the FIFO size anyway, and
the code below takes care of enforcing these limits.
Fixes: a380ed461f66d1b8 ("serial: sh-sci: implement FIFO threshold register setting")
Reported-by: Linh Phung <linh.phung.jy@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5eff320aef92ffb33d00e57979fd3603bbb4a70f.1620648218.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/sh-sci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1026,10 +1026,10 @@ static int scif_set_rtrg(struct uart_por
{
unsigned int bits;
+ if (rx_trig >= port->fifosize)
+ rx_trig = port->fifosize - 1;
if (rx_trig < 1)
rx_trig = 1;
- if (rx_trig >= port->fifosize)
- rx_trig = port->fifosize;
/* HSCIF can be set to an arbitrary level. */
if (sci_getreg(port, HSRTRGR)->size) {
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 032/116] serial: rp2: use request_firmware instead of request_firmware_nowait
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 031/116] serial: sh-sci: Fix off-by-one error in FIFO threshold register setting Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 033/116] USB: serial: ti_usb_3410_5052: add startech.com device id Greg Kroah-Hartman
` (87 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zheyu Ma
From: Zheyu Ma <zheyuma97@gmail.com>
commit 016002848c82eeb5d460489ce392d91fe18c475c upstream.
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls
'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the
firmware don't exists, function just return without initializing ports
of 'rp2_card'. But now the interrupt handler function has been
registered, and when an interrupt comes, 'rp2_uart_interrupt' may access
those ports then causing NULL pointer dereference or other bugs.
Because the driver does some initialization work in 'rp2_fw_cb', in
order to make the driver ready to handle interrupts, 'request_firmware'
should be used instead of asynchronous 'request_firmware_nowait'.
This report reveals it:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
assign_lock_key kernel/locking/lockdep.c:727 [inline]
register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753
__lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303
lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907
__raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
_raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144
spin_lock include/linux/spinlock.h:329 [inline]
rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline]
rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8
8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90
90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-
gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8
03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1
89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7
f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90
90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200
RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840
R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002
R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Modules linked in:
Dumping ftrace buffer:
(ftrace buffer empty)
CR2: 0000000000000010
---[ end trace 11804dbb55cb1a64 ]---
RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline]
RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline]
RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c:
493
Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1
e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89
c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83
RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1
RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820
RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05
R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000
R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0
FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/rp2.c | 52 +++++++++++++++--------------------------------
1 file changed, 17 insertions(+), 35 deletions(-)
--- a/drivers/tty/serial/rp2.c
+++ b/drivers/tty/serial/rp2.c
@@ -195,7 +195,6 @@ struct rp2_card {
void __iomem *bar0;
void __iomem *bar1;
spinlock_t card_lock;
- struct completion fw_loaded;
};
#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
@@ -664,17 +663,10 @@ static void rp2_remove_ports(struct rp2_
card->initialized_ports = 0;
}
-static void rp2_fw_cb(const struct firmware *fw, void *context)
+static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
{
- struct rp2_card *card = context;
resource_size_t phys_base;
- int i, rc = -ENOENT;
-
- if (!fw) {
- dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
- RP2_FW_NAME);
- goto no_fw;
- }
+ int i, rc = 0;
phys_base = pci_resource_start(card->pdev, 1);
@@ -720,23 +712,13 @@ static void rp2_fw_cb(const struct firmw
card->initialized_ports++;
}
- release_firmware(fw);
-no_fw:
- /*
- * rp2_fw_cb() is called from a workqueue long after rp2_probe()
- * has already returned success. So if something failed here,
- * we'll just leave the now-dormant device in place until somebody
- * unbinds it.
- */
- if (rc)
- dev_warn(&card->pdev->dev, "driver initialization failed\n");
-
- complete(&card->fw_loaded);
+ return rc;
}
static int rp2_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
+ const struct firmware *fw;
struct rp2_card *card;
struct rp2_uart_port *ports;
void __iomem * const *bars;
@@ -747,7 +729,6 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
pci_set_drvdata(pdev, card);
spin_lock_init(&card->card_lock);
- init_completion(&card->fw_loaded);
rc = pcim_enable_device(pdev);
if (rc)
@@ -780,21 +761,23 @@ static int rp2_probe(struct pci_dev *pde
return -ENOMEM;
card->ports = ports;
- rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
- IRQF_SHARED, DRV_NAME, card);
- if (rc)
+ rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
return rc;
+ }
- /*
- * Only catastrophic errors (e.g. ENOMEM) are reported here.
- * If the FW image is missing, we'll find out in rp2_fw_cb()
- * and print an error message.
- */
- rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
- GFP_KERNEL, card, rp2_fw_cb);
+ rc = rp2_load_firmware(card, fw);
+
+ release_firmware(fw);
+ if (rc < 0)
+ return rc;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
if (rc)
return rc;
- dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
return 0;
}
@@ -803,7 +786,6 @@ static void rp2_remove(struct pci_dev *p
{
struct rp2_card *card = pci_get_drvdata(pdev);
- wait_for_completion(&card->fw_loaded);
rp2_remove_ports(card);
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 033/116] USB: serial: ti_usb_3410_5052: add startech.com device id
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 032/116] serial: rp2: use request_firmware instead of request_firmware_nowait Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 034/116] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 Greg Kroah-Hartman
` (86 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sean MacLennan, Johan Hovold
From: Sean MacLennan <seanm@seanm.ca>
commit 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 upstream.
This adds support for the Startech.com generic serial to USB converter.
It seems to be a bone stock TI_3410. I have been using this patch for
years.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ti_usb_3410_5052.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -37,6 +37,7 @@
/* Vendor and product ids */
#define TI_VENDOR_ID 0x0451
#define IBM_VENDOR_ID 0x04b3
+#define STARTECH_VENDOR_ID 0x14b0
#define TI_3410_PRODUCT_ID 0x3410
#define IBM_4543_PRODUCT_ID 0x4543
#define IBM_454B_PRODUCT_ID 0x454b
@@ -374,6 +375,7 @@ static const struct usb_device_id ti_id_
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
@@ -412,6 +414,7 @@ static const struct usb_device_id ti_id_
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
{ USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
+ { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ } /* terminator */
};
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 034/116] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 033/116] USB: serial: ti_usb_3410_5052: add startech.com device id Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 035/116] USB: serial: ftdi_sio: add IDs for IDS GmbH Products Greg Kroah-Hartman
` (85 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
Add support for the following Telit LE910-S1 compositions:
0x7010: rndis, tty, tty, tty
0x7011: ecm, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210428072634.5091-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1240,6 +1240,10 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7010, 0xff), /* Telit LE910-S1 (RNDIS) */
+ .driver_info = NCTRL(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x7011, 0xff), /* Telit LE910-S1 (ECM) */
+ .driver_info = NCTRL(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
.driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 035/116] USB: serial: ftdi_sio: add IDs for IDS GmbH Products
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 034/116] USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011 Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 036/116] USB: serial: pl2303: add device id for ADLINK ND-6530 GC Greg Kroah-Hartman
` (84 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dominik Andreas Schorpp,
Juergen Borleis, Johan Hovold
From: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
and CM31A (LoRaWAN Modem).
Signed-off-by: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 3 +++
drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++
2 files changed, 10 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1024,6 +1024,9 @@ static const struct usb_device_id id_tab
/* Sienna devices */
{ USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
{ USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
+ /* IDS GmbH devices */
+ { USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
+ { USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1568,6 +1568,13 @@
#define UNJO_ISODEBUG_V1_PID 0x150D
/*
+ * IDS GmbH
+ */
+#define IDS_VID 0x2CAF
+#define IDS_SI31A_PID 0x13A2
+#define IDS_CM31A_PID 0x13A3
+
+/*
* U-Blox products (http://www.u-blox.com).
*/
#define UBLOX_VID 0x1546
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 036/116] USB: serial: pl2303: add device id for ADLINK ND-6530 GC
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 035/116] USB: serial: ftdi_sio: add IDs for IDS GmbH Products Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 037/116] usb: dwc3: gadget: Properly track pending and queued SG Greg Kroah-Hartman
` (83 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zolton Jheng, Johan Hovold
From: Zolton Jheng <s6668c2t@gmail.com>
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.
Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -107,6 +107,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -152,6 +152,7 @@
/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
+#define ADLINK_ND6530GC_PRODUCT_ID 0x653a
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 037/116] usb: dwc3: gadget: Properly track pending and queued SG
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 036/116] USB: serial: pl2303: add device id for ADLINK ND-6530 GC Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 038/116] usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen() Greg Kroah-Hartman
` (82 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Grzeschik, Felipe Balbi,
Thinh Nguyen
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
commit 25dda9fc56bd90d45f9a4516bcfa5211e61b4290 upstream.
The driver incorrectly uses req->num_pending_sgs to track both the
number of pending and queued SG entries. It only prepares the next
request if the previous is done, and it doesn't update num_pending_sgs
until there is TRB completion interrupt. This may starve the controller
of more TRBs until the num_pending_sgs is decremented.
Fix this by decrementing the num_pending_sgs after they are queued and
properly track both num_mapped_sgs and num_queued_sgs.
Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs")
Cc: <stable@vger.kernel.org>
Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ba24591dbcaad8f244a3e88bd449bb7205a5aec3.1620874069.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1162,6 +1162,7 @@ static void dwc3_prepare_one_trb_sg(stru
req->start_sg = sg_next(s);
req->num_queued_sgs++;
+ req->num_pending_sgs--;
/*
* The number of pending SG entries may not correspond to the
@@ -1169,7 +1170,7 @@ static void dwc3_prepare_one_trb_sg(stru
* don't include unused SG entries.
*/
if (length == 0) {
- req->num_pending_sgs -= req->request.num_mapped_sgs - req->num_queued_sgs;
+ req->num_pending_sgs = 0;
break;
}
@@ -2361,15 +2362,15 @@ static int dwc3_gadget_ep_reclaim_trb_sg
struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
struct scatterlist *sg = req->sg;
struct scatterlist *s;
- unsigned int pending = req->num_pending_sgs;
+ unsigned int num_queued = req->num_queued_sgs;
unsigned int i;
int ret = 0;
- for_each_sg(sg, s, pending, i) {
+ for_each_sg(sg, s, num_queued, i) {
trb = &dep->trb_pool[dep->trb_dequeue];
req->sg = sg_next(s);
- req->num_pending_sgs--;
+ req->num_queued_sgs--;
ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
trb, event, status, true);
@@ -2392,7 +2393,7 @@ static int dwc3_gadget_ep_reclaim_trb_li
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
- return req->num_pending_sgs == 0;
+ return req->num_pending_sgs == 0 && req->num_queued_sgs == 0;
}
static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
@@ -2401,7 +2402,7 @@ static int dwc3_gadget_ep_cleanup_comple
{
int ret;
- if (req->num_pending_sgs)
+ if (req->request.num_mapped_sgs)
ret = dwc3_gadget_ep_reclaim_trb_sg(dep, req, event,
status);
else
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 038/116] usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 037/116] usb: dwc3: gadget: Properly track pending and queued SG Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 039/116] net: usb: fix memory leak in smsc75xx_bind Greg Kroah-Hartman
` (81 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:
renesas_usb3_ep_queue()
spin_lock_irqsave()
list_add_tail()
spin_unlock_irqrestore()
usb3_start_pipen()
usb3_first_req = usb3_get_request() --- [1]
--- interrupt ---
usb3_irq_dma_int()
usb3_request_done_pipen()
usb3_get_request()
usb3_start_pipen()
usb3_first_req = usb3_get_request()
...
(the req is possible to be finished in the interrupt)
The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/renesas_usb3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1466,7 +1466,7 @@ static void usb3_start_pipen(struct rene
struct renesas_usb3_request *usb3_req)
{
struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
- struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep);
+ struct renesas_usb3_request *usb3_req_first;
unsigned long flags;
int ret = -EAGAIN;
u32 enable_bits = 0;
@@ -1474,7 +1474,8 @@ static void usb3_start_pipen(struct rene
spin_lock_irqsave(&usb3->lock, flags);
if (usb3_ep->halt || usb3_ep->started)
goto out;
- if (usb3_req != usb3_req_first)
+ usb3_req_first = __usb3_get_request(usb3_ep);
+ if (!usb3_req_first || usb3_req != usb3_req_first)
goto out;
if (usb3_pn_change(usb3, usb3_ep->num) < 0)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 039/116] net: usb: fix memory leak in smsc75xx_bind
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 038/116] usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen() Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 040/116] bpf: fix up selftests after backports were fixed Greg Kroah-Hartman
` (80 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, Pavel Skripkin,
David S. Miller, syzbot+b558506ba8165425fee2
From: Pavel Skripkin <paskripkin@gmail.com>
commit 46a8b29c6306d8bbfd92b614ef65a47c900d8e70 upstream.
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/smsc75xx.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1495,7 +1495,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_wait_ready(dev, 0);
if (ret < 0) {
netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
- return ret;
+ goto err;
}
smsc75xx_init_mac_address(dev);
@@ -1504,7 +1504,7 @@ static int smsc75xx_bind(struct usbnet *
ret = smsc75xx_reset(dev);
if (ret < 0) {
netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
- return ret;
+ goto err;
}
dev->net->netdev_ops = &smsc75xx_netdev_ops;
@@ -1514,6 +1514,10 @@ static int smsc75xx_bind(struct usbnet *
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
return 0;
+
+err:
+ kfree(pdata);
+ return ret;
}
static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 040/116] bpf: fix up selftests after backports were fixed
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 039/116] net: usb: fix memory leak in smsc75xx_bind Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 041/116] bpf, selftests: Fix up some test_verifier cases for unprivileged Greg Kroah-Hartman
` (79 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Frank van der Linden, Ovidiu Panait
From: Ovidiu Panait <ovidiu.panait@windriver.com>
After the backport of the changes to fix CVE 2019-7308, the
selftests also need to be fixed up, as was done originally
in mainline 80c9b2fae87b ("bpf: add various test cases to selftests").
This is a backport of upstream commit 80c9b2fae87b ("bpf: add various test
cases to selftests") adapted to 4.19 in order to fix the
selftests that began to fail after CVE-2019-7308 fixes.
Suggested-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -2448,6 +2448,7 @@ static struct bpf_test tests[] = {
},
.result = REJECT,
.errstr = "invalid stack off=-79992 size=8",
+ .errstr_unpriv = "R1 stack pointer arithmetic goes out of range",
},
{
"PTR_TO_STACK store/load - out of bounds high",
@@ -2844,6 +2845,8 @@ static struct bpf_test tests[] = {
BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, -8),
BPF_EXIT_INSN(),
},
+ .errstr_unpriv = "R1 stack pointer arithmetic goes out of range",
+ .result_unpriv = REJECT,
.result = ACCEPT,
},
{
@@ -7457,6 +7460,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7481,6 +7485,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7507,6 +7512,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R8 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7532,6 +7538,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R8 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7580,6 +7587,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7651,6 +7659,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7702,6 +7711,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7729,6 +7739,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7755,6 +7766,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7784,6 +7796,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R7 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7814,6 +7827,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 4 },
.errstr = "R0 invalid mem access 'inv'",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7842,6 +7856,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
.result_unpriv = REJECT,
},
@@ -7894,6 +7909,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "R0 min value is negative, either use unsigned index or do a if (index >=0) check.",
+ .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -8266,6 +8282,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "pointer offset 1073741822",
+ .errstr_unpriv = "R0 pointer arithmetic of map value goes out of range",
.result = REJECT
},
{
@@ -8287,6 +8304,7 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "pointer offset -1073741822",
+ .errstr_unpriv = "R0 pointer arithmetic of map value goes out of range",
.result = REJECT
},
{
@@ -8458,6 +8476,7 @@ static struct bpf_test tests[] = {
BPF_EXIT_INSN()
},
.errstr = "fp pointer offset 1073741822",
+ .errstr_unpriv = "R1 stack pointer arithmetic goes out of range",
.result = REJECT
},
{
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 041/116] bpf, selftests: Fix up some test_verifier cases for unprivileged
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 040/116] bpf: fix up selftests after backports were fixed Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 042/116] selftests/bpf: Test narrow loads with off > 0 in test_verifier Greg Kroah-Hartman
` (78 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Piotr Krysiuk, Daniel Borkmann,
Alexei Starovoitov, Ovidiu Panait
From: Piotr Krysiuk <piotras@gmail.com>
commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3 upstream
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[OP: backport to 4.19, skipping non-existent tests]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 42 ++++++++++++++++++++++------
1 file changed, 33 insertions(+), 9 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -2837,7 +2837,7 @@ static struct bpf_test tests[] = {
.result = ACCEPT,
},
{
- "unpriv: adding of fp",
+ "unpriv: adding of fp, reg",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_MOV64_IMM(BPF_REG_1, 0),
@@ -2845,6 +2845,19 @@ static struct bpf_test tests[] = {
BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, -8),
BPF_EXIT_INSN(),
},
+ .errstr_unpriv = "R1 tried to add from different maps, paths, or prohibited types",
+ .result_unpriv = REJECT,
+ .result = ACCEPT,
+ },
+ {
+ "unpriv: adding of fp, imm",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 0),
+ BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, -8),
+ BPF_EXIT_INSN(),
+ },
.errstr_unpriv = "R1 stack pointer arithmetic goes out of range",
.result_unpriv = REJECT,
.result = ACCEPT,
@@ -9758,8 +9771,9 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
.errstr = "R0 tried to subtract pointer from scalar",
+ .result = REJECT,
},
{
"check deducing bounds from const, 2",
@@ -9772,6 +9786,8 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_0),
BPF_EXIT_INSN(),
},
+ .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
+ .result_unpriv = REJECT,
.result = ACCEPT,
.retval = 1,
},
@@ -9783,8 +9799,9 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
.errstr = "R0 tried to subtract pointer from scalar",
+ .result = REJECT,
},
{
"check deducing bounds from const, 4",
@@ -9797,6 +9814,8 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_0),
BPF_EXIT_INSN(),
},
+ .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
+ .result_unpriv = REJECT,
.result = ACCEPT,
},
{
@@ -9807,8 +9826,9 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
.errstr = "R0 tried to subtract pointer from scalar",
+ .result = REJECT,
},
{
"check deducing bounds from const, 6",
@@ -9819,8 +9839,9 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
.errstr = "R0 tried to subtract pointer from scalar",
+ .result = REJECT,
},
{
"check deducing bounds from const, 7",
@@ -9832,8 +9853,9 @@ static struct bpf_test tests[] = {
offsetof(struct __sk_buff, mark)),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
.errstr = "dereference of modified ctx ptr",
+ .result = REJECT,
},
{
"check deducing bounds from const, 8",
@@ -9845,8 +9867,9 @@ static struct bpf_test tests[] = {
offsetof(struct __sk_buff, mark)),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R1 tried to add from different maps, paths, or prohibited types",
.errstr = "dereference of modified ctx ptr",
+ .result = REJECT,
},
{
"check deducing bounds from const, 9",
@@ -9856,8 +9879,9 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
+ .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
.errstr = "R0 tried to subtract pointer from scalar",
+ .result = REJECT,
},
{
"check deducing bounds from const, 10",
@@ -9869,8 +9893,8 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .result = REJECT,
.errstr = "math between ctx pointer and register with unbounded min value is not allowed",
+ .result = REJECT,
},
{
"bpf_exit with invalid return code. test1",
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 042/116] selftests/bpf: Test narrow loads with off > 0 in test_verifier
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 041/116] bpf, selftests: Fix up some test_verifier cases for unprivileged Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 043/116] selftests/bpf: add selftest part of "bpf: improve verifier branch analysis" Greg Kroah-Hartman
` (77 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Andrey Ignatov, Alexei Starovoitov, Ovidiu Panait
From: Andrey Ignatov <rdna@fb.com>
commit 6c2afb674dbda9b736b8f09c976516e1e788860a upstream
Test the following narrow loads in test_verifier for context __sk_buff:
* off=1, size=1 - ok;
* off=2, size=1 - ok;
* off=3, size=1 - ok;
* off=0, size=2 - ok;
* off=1, size=2 - fail;
* off=0, size=2 - ok;
* off=3, size=2 - fail.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 48 ++++++++++++++++++++++------
1 file changed, 38 insertions(+), 10 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -2002,29 +2002,27 @@ static struct bpf_test tests[] = {
.result = ACCEPT,
},
{
- "check skb->hash byte load not permitted 1",
+ "check skb->hash byte load permitted 1",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1,
offsetof(struct __sk_buff, hash) + 1),
BPF_EXIT_INSN(),
},
- .errstr = "invalid bpf_context access",
- .result = REJECT,
+ .result = ACCEPT,
},
{
- "check skb->hash byte load not permitted 2",
+ "check skb->hash byte load permitted 2",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_LDX_MEM(BPF_B, BPF_REG_0, BPF_REG_1,
offsetof(struct __sk_buff, hash) + 2),
BPF_EXIT_INSN(),
},
- .errstr = "invalid bpf_context access",
- .result = REJECT,
+ .result = ACCEPT,
},
{
- "check skb->hash byte load not permitted 3",
+ "check skb->hash byte load permitted 3",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
#if __BYTE_ORDER == __LITTLE_ENDIAN
@@ -2036,8 +2034,7 @@ static struct bpf_test tests[] = {
#endif
BPF_EXIT_INSN(),
},
- .errstr = "invalid bpf_context access",
- .result = REJECT,
+ .result = ACCEPT,
},
{
"check cb access: byte, wrong type",
@@ -2149,7 +2146,7 @@ static struct bpf_test tests[] = {
.result = ACCEPT,
},
{
- "check skb->hash half load not permitted",
+ "check skb->hash half load permitted 2",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
#if __BYTE_ORDER == __LITTLE_ENDIAN
@@ -2161,6 +2158,37 @@ static struct bpf_test tests[] = {
#endif
BPF_EXIT_INSN(),
},
+ .result = ACCEPT,
+ },
+ {
+ "check skb->hash half load not permitted, unaligned 1",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+ BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1,
+ offsetof(struct __sk_buff, hash) + 1),
+#else
+ BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1,
+ offsetof(struct __sk_buff, hash) + 3),
+#endif
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "invalid bpf_context access",
+ .result = REJECT,
+ },
+ {
+ "check skb->hash half load not permitted, unaligned 3",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+ BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1,
+ offsetof(struct __sk_buff, hash) + 3),
+#else
+ BPF_LDX_MEM(BPF_H, BPF_REG_0, BPF_REG_1,
+ offsetof(struct __sk_buff, hash) + 1),
+#endif
+ BPF_EXIT_INSN(),
+ },
.errstr = "invalid bpf_context access",
.result = REJECT,
},
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 043/116] selftests/bpf: add selftest part of "bpf: improve verifier branch analysis"
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 042/116] selftests/bpf: Test narrow loads with off > 0 in test_verifier Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 044/116] bpf: extend is_branch_taken to registers Greg Kroah-Hartman
` (76 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, Ovidiu Panait
From: Ovidiu Panait <ovidiu.panait@windriver.com>
Backport the missing selftest part of commit 7da6cd690c43 ("bpf: improve
verifier branch analysis") in order to fix the following test_verifier
failures:
...
Unexpected success to load!
0: (b7) r0 = 0
1: (75) if r0 s>= 0x0 goto pc+1
3: (95) exit
processed 3 insns (limit 131072), stack depth 0
Unexpected success to load!
0: (b7) r0 = 0
1: (75) if r0 s>= 0x0 goto pc+1
3: (95) exit
processed 3 insns (limit 131072), stack depth 0
...
The changesets apply with a minor context difference.
Fixes: 7da6cd690c43 ("bpf: improve verifier branch analysis")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -7867,7 +7867,7 @@ static struct bpf_test tests[] = {
BPF_JMP_IMM(BPF_JA, 0, 0, -7),
},
.fixup_map1 = { 4 },
- .errstr = "R0 invalid mem access 'inv'",
+ .errstr = "unbounded min value",
.errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
@@ -9850,7 +9850,7 @@ static struct bpf_test tests[] = {
"check deducing bounds from const, 5",
.insns = {
BPF_MOV64_IMM(BPF_REG_0, 0),
- BPF_JMP_IMM(BPF_JSGE, BPF_REG_0, 0, 1),
+ BPF_JMP_IMM(BPF_JSGE, BPF_REG_0, 1, 1),
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 044/116] bpf: extend is_branch_taken to registers
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 043/116] selftests/bpf: add selftest part of "bpf: improve verifier branch analysis" Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 045/116] bpf: Test_verifier, bpf_get_stack return value add <0 Greg Kroah-Hartman
` (75 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Alexei Starovoitov, Andrii Nakryiko,
Daniel Borkmann, Ovidiu Panait
From: Alexei Starovoitov <ast@kernel.org>
commit fb8d251ee2a6bf4d7f4af5548e9c8f4fb5f90402 upstream
This patch extends is_branch_taken() logic from JMP+K instructions
to JMP+X instructions.
Conditional branches are often done when src and dst registers
contain known scalars. In such case the verifier can follow
the branch that is going to be taken when program executes.
That speeds up the verification and is essential feature to support
bounded loops.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[OP: drop is_jmp32 parameter from is_branch_taken() calls and
adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4127,8 +4127,9 @@ static int check_cond_jmp_op(struct bpf_
struct bpf_verifier_state *this_branch = env->cur_state;
struct bpf_verifier_state *other_branch;
struct bpf_reg_state *regs = this_branch->frame[this_branch->curframe]->regs;
- struct bpf_reg_state *dst_reg, *other_branch_regs;
+ struct bpf_reg_state *dst_reg, *other_branch_regs, *src_reg = NULL;
u8 opcode = BPF_OP(insn->code);
+ int pred = -1;
int err;
if (opcode > BPF_JSLE) {
@@ -4152,6 +4153,7 @@ static int check_cond_jmp_op(struct bpf_
insn->src_reg);
return -EACCES;
}
+ src_reg = ®s[insn->src_reg];
} else {
if (insn->src_reg != BPF_REG_0) {
verbose(env, "BPF_JMP uses reserved fields\n");
@@ -4166,19 +4168,21 @@ static int check_cond_jmp_op(struct bpf_
dst_reg = ®s[insn->dst_reg];
- if (BPF_SRC(insn->code) == BPF_K) {
- int pred = is_branch_taken(dst_reg, insn->imm, opcode);
-
- if (pred == 1) {
- /* only follow the goto, ignore fall-through */
- *insn_idx += insn->off;
- return 0;
- } else if (pred == 0) {
- /* only follow fall-through branch, since
- * that's where the program will go
- */
- return 0;
- }
+ if (BPF_SRC(insn->code) == BPF_K)
+ pred = is_branch_taken(dst_reg, insn->imm, opcode);
+ else if (src_reg->type == SCALAR_VALUE &&
+ tnum_is_const(src_reg->var_off))
+ pred = is_branch_taken(dst_reg, src_reg->var_off.value,
+ opcode);
+ if (pred == 1) {
+ /* only follow the goto, ignore fall-through */
+ *insn_idx += insn->off;
+ return 0;
+ } else if (pred == 0) {
+ /* only follow fall-through branch, since
+ * that's where the program will go
+ */
+ return 0;
}
other_branch = push_stack(env, *insn_idx + insn->off + 1, *insn_idx,
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 045/116] bpf: Test_verifier, bpf_get_stack return value add <0
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 044/116] bpf: extend is_branch_taken to registers Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 046/116] bpf, test_verifier: switch bpf_get_stacks 0 s> r8 test Greg Kroah-Hartman
` (74 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, John Fastabend, Alexei Starovoitov,
Daniel Borkmann, Ovidiu Panait
From: John Fastabend <john.fastabend@gmail.com>
commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream.
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
R3_w=inv48
15:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
16: (bf) r8 = r0
17:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=9223372032559808512,
umax_value=18446744069414584320,
var_off=(0x0; 0xffffffff00000000),
s32_min_value=0,
s32_max_value=0,
u32_max_value=0,
var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=2147483647,
var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
var32_off=(0x0; 0xffffffff))
20:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -2147483648 makes map_value pointer be out of bounds
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12253,17 +12253,17 @@ static struct bpf_test tests[] = {
BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 28),
BPF_MOV64_REG(BPF_REG_7, BPF_REG_0),
- BPF_MOV64_IMM(BPF_REG_9, sizeof(struct test_val)),
+ BPF_MOV64_IMM(BPF_REG_9, sizeof(struct test_val)/2),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
- BPF_MOV64_IMM(BPF_REG_3, sizeof(struct test_val)),
+ BPF_MOV64_IMM(BPF_REG_3, sizeof(struct test_val)/2),
BPF_MOV64_IMM(BPF_REG_4, 256),
BPF_EMIT_CALL(BPF_FUNC_get_stack),
BPF_MOV64_IMM(BPF_REG_1, 0),
BPF_MOV64_REG(BPF_REG_8, BPF_REG_0),
BPF_ALU64_IMM(BPF_LSH, BPF_REG_8, 32),
BPF_ALU64_IMM(BPF_ARSH, BPF_REG_8, 32),
- BPF_JMP_REG(BPF_JSLT, BPF_REG_1, BPF_REG_8, 16),
+ BPF_JMP_REG(BPF_JSGT, BPF_REG_1, BPF_REG_8, 16),
BPF_ALU64_REG(BPF_SUB, BPF_REG_9, BPF_REG_8),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_8),
@@ -12273,7 +12273,7 @@ static struct bpf_test tests[] = {
BPF_MOV64_REG(BPF_REG_3, BPF_REG_2),
BPF_ALU64_REG(BPF_ADD, BPF_REG_3, BPF_REG_1),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_7),
- BPF_MOV64_IMM(BPF_REG_5, sizeof(struct test_val)),
+ BPF_MOV64_IMM(BPF_REG_5, sizeof(struct test_val)/2),
BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_5),
BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_1, 4),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 046/116] bpf, test_verifier: switch bpf_get_stacks 0 s> r8 test
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 045/116] bpf: Test_verifier, bpf_get_stack return value add <0 Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 047/116] bpf: Move off_reg into sanitize_ptr_alu Greg Kroah-Hartman
` (73 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, Alexei Starovoitov,
John Fastabend, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
[ no upstream commit ]
Switch the comparison, so that is_branch_taken() will recognize that below
branch is never taken:
[...]
17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
17: (67) r8 <<= 32
18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...]
18: (c7) r8 s>>= 32
19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
19: (6d) if r1 s> r8 goto pc+16
[...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...]
[...]
Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.
For the sake of the test_verifier, it is probably not needed here:
# ./test_verifier 101
#101/p bpf_get_stack return R0 within range OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
I haven't seen this issue in test_progs* though, they are passing fine:
# ./test_progs-no_alu32 -t get_stack
Switching to flavor 'no_alu32' subdirectory...
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
# ./test_progs -t get_stack
#20 get_stack_raw_tp:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12263,7 +12263,7 @@ static struct bpf_test tests[] = {
BPF_MOV64_REG(BPF_REG_8, BPF_REG_0),
BPF_ALU64_IMM(BPF_LSH, BPF_REG_8, 32),
BPF_ALU64_IMM(BPF_ARSH, BPF_REG_8, 32),
- BPF_JMP_REG(BPF_JSGT, BPF_REG_1, BPF_REG_8, 16),
+ BPF_JMP_REG(BPF_JSLT, BPF_REG_8, BPF_REG_1, 16),
BPF_ALU64_REG(BPF_SUB, BPF_REG_9, BPF_REG_8),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_7),
BPF_ALU64_REG(BPF_ADD, BPF_REG_2, BPF_REG_8),
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 047/116] bpf: Move off_reg into sanitize_ptr_alu
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 046/116] bpf, test_verifier: switch bpf_get_stacks 0 s> r8 test Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 048/116] bpf: Ensure off_reg has no mixed signed bounds for all types Greg Kroah-Hartman
` (72 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 6f55b2f2a1178856c19bbce2f71449926e731914 upstream.
Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2799,11 +2799,12 @@ static int sanitize_val_alu(struct bpf_v
static int sanitize_ptr_alu(struct bpf_verifier_env *env,
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
- struct bpf_reg_state *dst_reg,
- bool off_is_neg)
+ const struct bpf_reg_state *off_reg,
+ struct bpf_reg_state *dst_reg)
{
struct bpf_verifier_state *vstate = env->cur_state;
struct bpf_insn_aux_data *aux = cur_aux(env);
+ bool off_is_neg = off_reg->smin_value < 0;
bool ptr_is_dst_reg = ptr_reg == dst_reg;
u8 opcode = BPF_OP(insn->code);
u32 alu_state, alu_limit;
@@ -2927,7 +2928,7 @@ static int adjust_ptr_min_max_vals(struc
switch (opcode) {
case BPF_ADD:
- ret = sanitize_ptr_alu(env, insn, ptr_reg, dst_reg, smin_val < 0);
+ ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
if (ret < 0) {
verbose(env, "R%d tried to add from different maps, paths, or prohibited types\n", dst);
return ret;
@@ -2982,7 +2983,7 @@ static int adjust_ptr_min_max_vals(struc
}
break;
case BPF_SUB:
- ret = sanitize_ptr_alu(env, insn, ptr_reg, dst_reg, smin_val < 0);
+ ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
if (ret < 0) {
verbose(env, "R%d tried to sub from different maps, paths, or prohibited types\n", dst);
return ret;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 048/116] bpf: Ensure off_reg has no mixed signed bounds for all types
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 047/116] bpf: Move off_reg into sanitize_ptr_alu Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 049/116] bpf: Rework ptr_limit into alu_limit and add common error path Greg Kroah-Hartman
` (71 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Frank van der Linden, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 24c109bb1537c12c02aeed2d51a347b4d6a9b76e upstream.
The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede769
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2730,12 +2730,18 @@ static struct bpf_insn_aux_data *cur_aux
}
static int retrieve_ptr_limit(const struct bpf_reg_state *ptr_reg,
- u32 *ptr_limit, u8 opcode, bool off_is_neg)
+ const struct bpf_reg_state *off_reg,
+ u32 *ptr_limit, u8 opcode)
{
+ bool off_is_neg = off_reg->smin_value < 0;
bool mask_to_left = (opcode == BPF_ADD && off_is_neg) ||
(opcode == BPF_SUB && !off_is_neg);
u32 off, max;
+ if (!tnum_is_const(off_reg->var_off) &&
+ (off_reg->smin_value < 0) != (off_reg->smax_value < 0))
+ return -EACCES;
+
switch (ptr_reg->type) {
case PTR_TO_STACK:
/* Offset 0 is out-of-bounds, but acceptable start for the
@@ -2826,7 +2832,7 @@ static int sanitize_ptr_alu(struct bpf_v
alu_state |= ptr_is_dst_reg ?
BPF_ALU_SANITIZE_SRC : BPF_ALU_SANITIZE_DST;
- err = retrieve_ptr_limit(ptr_reg, &alu_limit, opcode, off_is_neg);
+ err = retrieve_ptr_limit(ptr_reg, off_reg, &alu_limit, opcode);
if (err < 0)
return err;
@@ -2871,8 +2877,8 @@ static int adjust_ptr_min_max_vals(struc
smin_ptr = ptr_reg->smin_value, smax_ptr = ptr_reg->smax_value;
u64 umin_val = off_reg->umin_value, umax_val = off_reg->umax_value,
umin_ptr = ptr_reg->umin_value, umax_ptr = ptr_reg->umax_value;
- u32 dst = insn->dst_reg, src = insn->src_reg;
u8 opcode = BPF_OP(insn->code);
+ u32 dst = insn->dst_reg;
int ret;
dst_reg = ®s[dst];
@@ -2909,12 +2915,6 @@ static int adjust_ptr_min_max_vals(struc
dst);
return -EACCES;
}
- if (ptr_reg->type == PTR_TO_MAP_VALUE &&
- !env->allow_ptr_leaks && !known && (smin_val < 0) != (smax_val < 0)) {
- verbose(env, "R%d has unknown scalar with mixed signed bounds, pointer arithmetic with it prohibited for !root\n",
- off_reg == dst_reg ? dst : src);
- return -EACCES;
- }
/* In case of 'scalar += pointer', dst_reg inherits pointer type and id.
* The id may be overwritten later if we create a new variable offset.
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 049/116] bpf: Rework ptr_limit into alu_limit and add common error path
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 048/116] bpf: Ensure off_reg has no mixed signed bounds for all types Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 050/116] bpf: Improve verifier error messages for users Greg Kroah-Hartman
` (70 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit b658bbb844e28f1862867f37e8ca11a8e2aa94a3 upstream.
Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2731,12 +2731,12 @@ static struct bpf_insn_aux_data *cur_aux
static int retrieve_ptr_limit(const struct bpf_reg_state *ptr_reg,
const struct bpf_reg_state *off_reg,
- u32 *ptr_limit, u8 opcode)
+ u32 *alu_limit, u8 opcode)
{
bool off_is_neg = off_reg->smin_value < 0;
bool mask_to_left = (opcode == BPF_ADD && off_is_neg) ||
(opcode == BPF_SUB && !off_is_neg);
- u32 off, max;
+ u32 off, max = 0, ptr_limit = 0;
if (!tnum_is_const(off_reg->var_off) &&
(off_reg->smin_value < 0) != (off_reg->smax_value < 0))
@@ -2750,22 +2750,27 @@ static int retrieve_ptr_limit(const stru
max = MAX_BPF_STACK + mask_to_left;
off = ptr_reg->off + ptr_reg->var_off.value;
if (mask_to_left)
- *ptr_limit = MAX_BPF_STACK + off;
+ ptr_limit = MAX_BPF_STACK + off;
else
- *ptr_limit = -off - 1;
- return *ptr_limit >= max ? -ERANGE : 0;
+ ptr_limit = -off - 1;
+ break;
case PTR_TO_MAP_VALUE:
max = ptr_reg->map_ptr->value_size;
if (mask_to_left) {
- *ptr_limit = ptr_reg->umax_value + ptr_reg->off;
+ ptr_limit = ptr_reg->umax_value + ptr_reg->off;
} else {
off = ptr_reg->smin_value + ptr_reg->off;
- *ptr_limit = ptr_reg->map_ptr->value_size - off - 1;
+ ptr_limit = ptr_reg->map_ptr->value_size - off - 1;
}
- return *ptr_limit >= max ? -ERANGE : 0;
+ break;
default:
return -EINVAL;
}
+
+ if (ptr_limit >= max)
+ return -ERANGE;
+ *alu_limit = ptr_limit;
+ return 0;
}
static bool can_skip_alu_sanitation(const struct bpf_verifier_env *env,
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 050/116] bpf: Improve verifier error messages for users
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 049/116] bpf: Rework ptr_limit into alu_limit and add common error path Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 051/116] bpf: Refactor and streamline bounds check into helper Greg Kroah-Hartman
` (69 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Frank van der Linden, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit a6aaece00a57fa6f22575364b3903dfbccf5345d upstream
Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 84 ++++++++++++++++++++++++++++++++++++--------------
1 file changed, 62 insertions(+), 22 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2729,6 +2729,14 @@ static struct bpf_insn_aux_data *cur_aux
return &env->insn_aux_data[env->insn_idx];
}
+enum {
+ REASON_BOUNDS = -1,
+ REASON_TYPE = -2,
+ REASON_PATHS = -3,
+ REASON_LIMIT = -4,
+ REASON_STACK = -5,
+};
+
static int retrieve_ptr_limit(const struct bpf_reg_state *ptr_reg,
const struct bpf_reg_state *off_reg,
u32 *alu_limit, u8 opcode)
@@ -2740,7 +2748,7 @@ static int retrieve_ptr_limit(const stru
if (!tnum_is_const(off_reg->var_off) &&
(off_reg->smin_value < 0) != (off_reg->smax_value < 0))
- return -EACCES;
+ return REASON_BOUNDS;
switch (ptr_reg->type) {
case PTR_TO_STACK:
@@ -2764,11 +2772,11 @@ static int retrieve_ptr_limit(const stru
}
break;
default:
- return -EINVAL;
+ return REASON_TYPE;
}
if (ptr_limit >= max)
- return -ERANGE;
+ return REASON_LIMIT;
*alu_limit = ptr_limit;
return 0;
}
@@ -2788,7 +2796,7 @@ static int update_alu_sanitation_state(s
if (aux->alu_state &&
(aux->alu_state != alu_state ||
aux->alu_limit != alu_limit))
- return -EACCES;
+ return REASON_PATHS;
/* Corresponding fixup done in fixup_bpf_calls(). */
aux->alu_state = alu_state;
@@ -2861,7 +2869,46 @@ do_sim:
ret = push_stack(env, env->insn_idx + 1, env->insn_idx, true);
if (!ptr_is_dst_reg && ret)
*dst_reg = tmp;
- return !ret ? -EFAULT : 0;
+ return !ret ? REASON_STACK : 0;
+}
+
+static int sanitize_err(struct bpf_verifier_env *env,
+ const struct bpf_insn *insn, int reason,
+ const struct bpf_reg_state *off_reg,
+ const struct bpf_reg_state *dst_reg)
+{
+ static const char *err = "pointer arithmetic with it prohibited for !root";
+ const char *op = BPF_OP(insn->code) == BPF_ADD ? "add" : "sub";
+ u32 dst = insn->dst_reg, src = insn->src_reg;
+
+ switch (reason) {
+ case REASON_BOUNDS:
+ verbose(env, "R%d has unknown scalar with mixed signed bounds, %s\n",
+ off_reg == dst_reg ? dst : src, err);
+ break;
+ case REASON_TYPE:
+ verbose(env, "R%d has pointer with unsupported alu operation, %s\n",
+ off_reg == dst_reg ? src : dst, err);
+ break;
+ case REASON_PATHS:
+ verbose(env, "R%d tried to %s from different maps, paths or scalars, %s\n",
+ dst, op, err);
+ break;
+ case REASON_LIMIT:
+ verbose(env, "R%d tried to %s beyond pointer bounds, %s\n",
+ dst, op, err);
+ break;
+ case REASON_STACK:
+ verbose(env, "R%d could not be pushed for speculative verification, %s\n",
+ dst, err);
+ break;
+ default:
+ verbose(env, "verifier internal error: unknown reason (%d)\n",
+ reason);
+ break;
+ }
+
+ return -EACCES;
}
/* Handles arithmetic on a pointer and a scalar: computes new min/max and var_off.
@@ -2934,10 +2981,9 @@ static int adjust_ptr_min_max_vals(struc
switch (opcode) {
case BPF_ADD:
ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
- if (ret < 0) {
- verbose(env, "R%d tried to add from different maps, paths, or prohibited types\n", dst);
- return ret;
- }
+ if (ret < 0)
+ return sanitize_err(env, insn, ret, off_reg, dst_reg);
+
/* We can take a fixed offset as long as it doesn't overflow
* the s32 'off' field
*/
@@ -2989,10 +3035,9 @@ static int adjust_ptr_min_max_vals(struc
break;
case BPF_SUB:
ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
- if (ret < 0) {
- verbose(env, "R%d tried to sub from different maps, paths, or prohibited types\n", dst);
- return ret;
- }
+ if (ret < 0)
+ return sanitize_err(env, insn, ret, off_reg, dst_reg);
+
if (dst_reg == off_reg) {
/* scalar -= pointer. Creates an unknown scalar */
verbose(env, "R%d tried to subtract pointer from scalar\n",
@@ -3109,7 +3154,6 @@ static int adjust_scalar_min_max_vals(st
s64 smin_val, smax_val;
u64 umin_val, umax_val;
u64 insn_bitness = (BPF_CLASS(insn->code) == BPF_ALU64) ? 64 : 32;
- u32 dst = insn->dst_reg;
int ret;
if (insn_bitness == 32) {
@@ -3146,10 +3190,8 @@ static int adjust_scalar_min_max_vals(st
switch (opcode) {
case BPF_ADD:
ret = sanitize_val_alu(env, insn);
- if (ret < 0) {
- verbose(env, "R%d tried to add from different pointers or scalars\n", dst);
- return ret;
- }
+ if (ret < 0)
+ return sanitize_err(env, insn, ret, NULL, NULL);
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
signed_add_overflows(dst_reg->smax_value, smax_val)) {
dst_reg->smin_value = S64_MIN;
@@ -3170,10 +3212,8 @@ static int adjust_scalar_min_max_vals(st
break;
case BPF_SUB:
ret = sanitize_val_alu(env, insn);
- if (ret < 0) {
- verbose(env, "R%d tried to sub from different pointers or scalars\n", dst);
- return ret;
- }
+ if (ret < 0)
+ return sanitize_err(env, insn, ret, NULL, NULL);
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
signed_sub_overflows(dst_reg->smax_value, smin_val)) {
/* Overflow possible, we know nothing */
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 051/116] bpf: Refactor and streamline bounds check into helper
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 050/116] bpf: Improve verifier error messages for users Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 052/116] bpf: Move sanitize_val_alu out of op switch Greg Kroah-Hartman
` (68 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Frank van der Linden, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 073815b756c51ba9d8384d924c5d1c03ca3d1ae4 upstream.
Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 54 ++++++++++++++++++++++++++++++++++----------------
1 file changed, 37 insertions(+), 17 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2911,6 +2911,41 @@ static int sanitize_err(struct bpf_verif
return -EACCES;
}
+static int sanitize_check_bounds(struct bpf_verifier_env *env,
+ const struct bpf_insn *insn,
+ const struct bpf_reg_state *dst_reg)
+{
+ u32 dst = insn->dst_reg;
+
+ /* For unprivileged we require that resulting offset must be in bounds
+ * in order to be able to sanitize access later on.
+ */
+ if (env->allow_ptr_leaks)
+ return 0;
+
+ switch (dst_reg->type) {
+ case PTR_TO_STACK:
+ if (check_stack_access(env, dst_reg, dst_reg->off +
+ dst_reg->var_off.value, 1)) {
+ verbose(env, "R%d stack pointer arithmetic goes out of range, "
+ "prohibited for !root\n", dst);
+ return -EACCES;
+ }
+ break;
+ case PTR_TO_MAP_VALUE:
+ if (check_map_access(env, dst, dst_reg->off, 1, false)) {
+ verbose(env, "R%d pointer arithmetic of map value goes out of range, "
+ "prohibited for !root\n", dst);
+ return -EACCES;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
/* Handles arithmetic on a pointer and a scalar: computes new min/max and var_off.
* Caller should also handle BPF_MOV case separately.
* If we return -EACCES, caller may want to try again treating pointer as a
@@ -3118,23 +3153,8 @@ static int adjust_ptr_min_max_vals(struc
__reg_deduce_bounds(dst_reg);
__reg_bound_offset(dst_reg);
- /* For unprivileged we require that resulting offset must be in bounds
- * in order to be able to sanitize access later on.
- */
- if (!env->allow_ptr_leaks) {
- if (dst_reg->type == PTR_TO_MAP_VALUE &&
- check_map_access(env, dst, dst_reg->off, 1, false)) {
- verbose(env, "R%d pointer arithmetic of map value goes out of range, "
- "prohibited for !root\n", dst);
- return -EACCES;
- } else if (dst_reg->type == PTR_TO_STACK &&
- check_stack_access(env, dst_reg, dst_reg->off +
- dst_reg->var_off.value, 1)) {
- verbose(env, "R%d stack pointer arithmetic goes out of range, "
- "prohibited for !root\n", dst);
- return -EACCES;
- }
- }
+ if (sanitize_check_bounds(env, insn, dst_reg) < 0)
+ return -EACCES;
return 0;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 052/116] bpf: Move sanitize_val_alu out of op switch
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 051/116] bpf: Refactor and streamline bounds check into helper Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 053/116] bpf: Tighten speculative pointer arithmetic mask Greg Kroah-Hartman
` (67 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Frank van der Linden, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit f528819334881fd622fdadeddb3f7edaed8b7c9b upstream.
Add a small sanitize_needed() helper function and move sanitize_val_alu()
out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu()
as well out of its opcode switch so this helps to streamline both.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2815,6 +2815,11 @@ static int sanitize_val_alu(struct bpf_v
return update_alu_sanitation_state(aux, BPF_ALU_NON_POINTER, 0);
}
+static bool sanitize_needed(u8 opcode)
+{
+ return opcode == BPF_ADD || opcode == BPF_SUB;
+}
+
static int sanitize_ptr_alu(struct bpf_verifier_env *env,
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
@@ -3207,11 +3212,14 @@ static int adjust_scalar_min_max_vals(st
return 0;
}
- switch (opcode) {
- case BPF_ADD:
+ if (sanitize_needed(opcode)) {
ret = sanitize_val_alu(env, insn);
if (ret < 0)
return sanitize_err(env, insn, ret, NULL, NULL);
+ }
+
+ switch (opcode) {
+ case BPF_ADD:
if (signed_add_overflows(dst_reg->smin_value, smin_val) ||
signed_add_overflows(dst_reg->smax_value, smax_val)) {
dst_reg->smin_value = S64_MIN;
@@ -3231,9 +3239,6 @@ static int adjust_scalar_min_max_vals(st
dst_reg->var_off = tnum_add(dst_reg->var_off, src_reg.var_off);
break;
case BPF_SUB:
- ret = sanitize_val_alu(env, insn);
- if (ret < 0)
- return sanitize_err(env, insn, ret, NULL, NULL);
if (signed_sub_overflows(dst_reg->smin_value, smax_val) ||
signed_sub_overflows(dst_reg->smax_value, smin_val)) {
/* Overflow possible, we know nothing */
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 053/116] bpf: Tighten speculative pointer arithmetic mask
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 052/116] bpf: Move sanitize_val_alu out of op switch Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 054/116] bpf: Update selftests to reflect new error states Greg Kroah-Hartman
` (66 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Piotr Krysiuk, Benedict Schlueter,
Daniel Borkmann, John Fastabend, Alexei Starovoitov,
Frank van der Linden, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 7fedb63a8307dda0ec3b8969a3b233a1dd7ea8e0 upstream.
This work tightens the offset mask we use for unprivileged pointer arithmetic
in order to mitigate a corner case reported by Piotr and Benedict where in
the speculative domain it is possible to advance, for example, the map value
pointer by up to value_size-1 out-of-bounds in order to leak kernel memory
via side-channel to user space.
Before this change, the computed ptr_limit for retrieve_ptr_limit() helper
represents largest valid distance when moving pointer to the right or left
which is then fed as aux->alu_limit to generate masking instructions against
the offset register. After the change, the derived aux->alu_limit represents
the largest potential value of the offset register which we mask against which
is just a narrower subset of the former limit.
For minimal complexity, we call sanitize_ptr_alu() from 2 observation points
in adjust_ptr_min_max_vals(), that is, before and after the simulated alu
operation. In the first step, we retieve the alu_state and alu_limit before
the operation as well as we branch-off a verifier path and push it to the
verification stack as we did before which checks the dst_reg under truncation,
in other words, when the speculative domain would attempt to move the pointer
out-of-bounds.
In the second step, we retrieve the new alu_limit and calculate the absolute
distance between both. Moreover, we commit the alu_state and final alu_limit
via update_alu_sanitation_state() to the env's instruction aux data, and bail
out from there if there is a mismatch due to coming from different verification
paths with different states.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 70 +++++++++++++++++++++++++++++++-------------------
1 file changed, 44 insertions(+), 26 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2744,7 +2744,7 @@ static int retrieve_ptr_limit(const stru
bool off_is_neg = off_reg->smin_value < 0;
bool mask_to_left = (opcode == BPF_ADD && off_is_neg) ||
(opcode == BPF_SUB && !off_is_neg);
- u32 off, max = 0, ptr_limit = 0;
+ u32 max = 0, ptr_limit = 0;
if (!tnum_is_const(off_reg->var_off) &&
(off_reg->smin_value < 0) != (off_reg->smax_value < 0))
@@ -2753,23 +2753,18 @@ static int retrieve_ptr_limit(const stru
switch (ptr_reg->type) {
case PTR_TO_STACK:
/* Offset 0 is out-of-bounds, but acceptable start for the
- * left direction, see BPF_REG_FP.
+ * left direction, see BPF_REG_FP. Also, unknown scalar
+ * offset where we would need to deal with min/max bounds is
+ * currently prohibited for unprivileged.
*/
max = MAX_BPF_STACK + mask_to_left;
- off = ptr_reg->off + ptr_reg->var_off.value;
- if (mask_to_left)
- ptr_limit = MAX_BPF_STACK + off;
- else
- ptr_limit = -off - 1;
+ ptr_limit = -(ptr_reg->var_off.value + ptr_reg->off);
break;
case PTR_TO_MAP_VALUE:
max = ptr_reg->map_ptr->value_size;
- if (mask_to_left) {
- ptr_limit = ptr_reg->umax_value + ptr_reg->off;
- } else {
- off = ptr_reg->smin_value + ptr_reg->off;
- ptr_limit = ptr_reg->map_ptr->value_size - off - 1;
- }
+ ptr_limit = (mask_to_left ?
+ ptr_reg->smin_value :
+ ptr_reg->umax_value) + ptr_reg->off;
break;
default:
return REASON_TYPE;
@@ -2824,10 +2819,12 @@ static int sanitize_ptr_alu(struct bpf_v
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
const struct bpf_reg_state *off_reg,
- struct bpf_reg_state *dst_reg)
+ struct bpf_reg_state *dst_reg,
+ struct bpf_insn_aux_data *tmp_aux,
+ const bool commit_window)
{
+ struct bpf_insn_aux_data *aux = commit_window ? cur_aux(env) : tmp_aux;
struct bpf_verifier_state *vstate = env->cur_state;
- struct bpf_insn_aux_data *aux = cur_aux(env);
bool off_is_neg = off_reg->smin_value < 0;
bool ptr_is_dst_reg = ptr_reg == dst_reg;
u8 opcode = BPF_OP(insn->code);
@@ -2846,18 +2843,33 @@ static int sanitize_ptr_alu(struct bpf_v
if (vstate->speculative)
goto do_sim;
- alu_state = off_is_neg ? BPF_ALU_NEG_VALUE : 0;
- alu_state |= ptr_is_dst_reg ?
- BPF_ALU_SANITIZE_SRC : BPF_ALU_SANITIZE_DST;
-
err = retrieve_ptr_limit(ptr_reg, off_reg, &alu_limit, opcode);
if (err < 0)
return err;
+ if (commit_window) {
+ /* In commit phase we narrow the masking window based on
+ * the observed pointer move after the simulated operation.
+ */
+ alu_state = tmp_aux->alu_state;
+ alu_limit = abs(tmp_aux->alu_limit - alu_limit);
+ } else {
+ alu_state = off_is_neg ? BPF_ALU_NEG_VALUE : 0;
+ alu_state |= ptr_is_dst_reg ?
+ BPF_ALU_SANITIZE_SRC : BPF_ALU_SANITIZE_DST;
+ }
+
err = update_alu_sanitation_state(aux, alu_state, alu_limit);
if (err < 0)
return err;
do_sim:
+ /* If we're in commit phase, we're done here given we already
+ * pushed the truncated dst_reg into the speculative verification
+ * stack.
+ */
+ if (commit_window)
+ return 0;
+
/* Simulate and find potential out-of-bounds access under
* speculative execution from truncation as a result of
* masking when off was not within expected range. If off
@@ -2969,6 +2981,7 @@ static int adjust_ptr_min_max_vals(struc
smin_ptr = ptr_reg->smin_value, smax_ptr = ptr_reg->smax_value;
u64 umin_val = off_reg->umin_value, umax_val = off_reg->umax_value,
umin_ptr = ptr_reg->umin_value, umax_ptr = ptr_reg->umax_value;
+ struct bpf_insn_aux_data tmp_aux = {};
u8 opcode = BPF_OP(insn->code);
u32 dst = insn->dst_reg;
int ret;
@@ -3018,12 +3031,15 @@ static int adjust_ptr_min_max_vals(struc
!check_reg_sane_offset(env, ptr_reg, ptr_reg->type))
return -EINVAL;
- switch (opcode) {
- case BPF_ADD:
- ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
+ if (sanitize_needed(opcode)) {
+ ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg,
+ &tmp_aux, false);
if (ret < 0)
return sanitize_err(env, insn, ret, off_reg, dst_reg);
+ }
+ switch (opcode) {
+ case BPF_ADD:
/* We can take a fixed offset as long as it doesn't overflow
* the s32 'off' field
*/
@@ -3074,10 +3090,6 @@ static int adjust_ptr_min_max_vals(struc
}
break;
case BPF_SUB:
- ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg);
- if (ret < 0)
- return sanitize_err(env, insn, ret, off_reg, dst_reg);
-
if (dst_reg == off_reg) {
/* scalar -= pointer. Creates an unknown scalar */
verbose(env, "R%d tried to subtract pointer from scalar\n",
@@ -3160,6 +3172,12 @@ static int adjust_ptr_min_max_vals(struc
if (sanitize_check_bounds(env, insn, dst_reg) < 0)
return -EACCES;
+ if (sanitize_needed(opcode)) {
+ ret = sanitize_ptr_alu(env, insn, dst_reg, off_reg, dst_reg,
+ &tmp_aux, true);
+ if (ret < 0)
+ return sanitize_err(env, insn, ret, off_reg, dst_reg);
+ }
return 0;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 054/116] bpf: Update selftests to reflect new error states
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 053/116] bpf: Tighten speculative pointer arithmetic mask Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 055/116] bpf: Fix leakage of uninitialized bpf stack under speculation Greg Kroah-Hartman
` (65 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, John Fastabend,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit d7a5091351756d0ae8e63134313c455624e36a13 upstream
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[OP: 4.19 backport, account for split test_verifier and
different / missing tests]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/bpf/test_verifier.c | 35 +++++++++-------------------
1 file changed, 12 insertions(+), 23 deletions(-)
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -2873,7 +2873,7 @@ static struct bpf_test tests[] = {
BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_0, -8),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R1 tried to add from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 stack pointer arithmetic goes out of range",
.result_unpriv = REJECT,
.result = ACCEPT,
},
@@ -7501,7 +7501,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7526,7 +7525,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7553,7 +7551,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R8 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7579,7 +7576,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R8 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7628,7 +7624,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7700,7 +7695,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7752,7 +7746,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7780,7 +7773,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7807,7 +7799,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7837,7 +7828,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R7 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7868,7 +7858,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 4 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
},
{
@@ -7897,7 +7886,6 @@ static struct bpf_test tests[] = {
},
.fixup_map1 = { 3 },
.errstr = "unbounded min value",
- .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds",
.result = REJECT,
.result_unpriv = REJECT,
},
@@ -9799,7 +9787,7 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "R0 tried to subtract pointer from scalar",
.result = REJECT,
},
@@ -9814,7 +9802,7 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_0),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.result_unpriv = REJECT,
.result = ACCEPT,
.retval = 1,
@@ -9827,22 +9815,23 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "R0 tried to subtract pointer from scalar",
.result = REJECT,
},
{
"check deducing bounds from const, 4",
.insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_JMP_IMM(BPF_JSLE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_JMP_IMM(BPF_JSGE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
- BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_0),
+ BPF_ALU64_REG(BPF_SUB, BPF_REG_6, BPF_REG_0),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R6 has pointer with unsupported alu operation",
.result_unpriv = REJECT,
.result = ACCEPT,
},
@@ -9854,7 +9843,7 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "R0 tried to subtract pointer from scalar",
.result = REJECT,
},
@@ -9867,7 +9856,7 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "R0 tried to subtract pointer from scalar",
.result = REJECT,
},
@@ -9881,7 +9870,7 @@ static struct bpf_test tests[] = {
offsetof(struct __sk_buff, mark)),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R1 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "dereference of modified ctx ptr",
.result = REJECT,
},
@@ -9895,7 +9884,7 @@ static struct bpf_test tests[] = {
offsetof(struct __sk_buff, mark)),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R1 tried to add from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "dereference of modified ctx ptr",
.result = REJECT,
},
@@ -9907,7 +9896,7 @@ static struct bpf_test tests[] = {
BPF_ALU64_REG(BPF_SUB, BPF_REG_0, BPF_REG_1),
BPF_EXIT_INSN(),
},
- .errstr_unpriv = "R0 tried to sub from different maps, paths, or prohibited types",
+ .errstr_unpriv = "R1 has pointer with unsupported alu operation",
.errstr = "R0 tried to subtract pointer from scalar",
.result = REJECT,
},
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 055/116] bpf: Fix leakage of uninitialized bpf stack under speculation
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 054/116] bpf: Update selftests to reflect new error states Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 056/116] bpf: Wrap aux data inside bpf_sanitize_info container Greg Kroah-Hartman
` (64 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Piotr Krysiuk, Daniel Borkmann,
John Fastabend, Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream.
The current implemented mechanisms to mitigate data disclosure under
speculation mainly address stack and map value oob access from the
speculative domain. However, Piotr discovered that uninitialized BPF
stack is not protected yet, and thus old data from the kernel stack,
potentially including addresses of kernel structures, could still be
extracted from that 512 bytes large window. The BPF stack is special
compared to map values since it's not zero initialized for every
program invocation, whereas map values /are/ zero initialized upon
their initial allocation and thus cannot leak any prior data in either
domain. In the non-speculative domain, the verifier ensures that every
stack slot read must have a prior stack slot write by the BPF program
to avoid such data leaking issue.
However, this is not enough: for example, when the pointer arithmetic
operation moves the stack pointer from the last valid stack offset to
the first valid offset, the sanitation logic allows for any intermediate
offsets during speculative execution, which could then be used to
extract any restricted stack content via side-channel.
Given for unprivileged stack pointer arithmetic the use of unknown
but bounded scalars is generally forbidden, we can simply turn the
register-based arithmetic operation into an immediate-based arithmetic
operation without the need for masking. This also gives the benefit
of reducing the needed instructions for the operation. Given after
the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"), the aux->alu_limit already holds the final immediate value for
the offset register with the known scalar. Thus, a simple mov of the
immediate to AX register with using AX as the source for the original
instruction is sufficient and possible now in this case.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/bpf_verifier.h | 5 +++--
kernel/bpf/verifier.c | 27 +++++++++++++++++----------
2 files changed, 20 insertions(+), 12 deletions(-)
--- a/include/linux/bpf_verifier.h
+++ b/include/linux/bpf_verifier.h
@@ -144,10 +144,11 @@ struct bpf_verifier_state_list {
};
/* Possible states for alu_state member. */
-#define BPF_ALU_SANITIZE_SRC 1U
-#define BPF_ALU_SANITIZE_DST 2U
+#define BPF_ALU_SANITIZE_SRC (1U << 0)
+#define BPF_ALU_SANITIZE_DST (1U << 1)
#define BPF_ALU_NEG_VALUE (1U << 2)
#define BPF_ALU_NON_POINTER (1U << 3)
+#define BPF_ALU_IMMEDIATE (1U << 4)
#define BPF_ALU_SANITIZE (BPF_ALU_SANITIZE_SRC | \
BPF_ALU_SANITIZE_DST)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2825,6 +2825,7 @@ static int sanitize_ptr_alu(struct bpf_v
{
struct bpf_insn_aux_data *aux = commit_window ? cur_aux(env) : tmp_aux;
struct bpf_verifier_state *vstate = env->cur_state;
+ bool off_is_imm = tnum_is_const(off_reg->var_off);
bool off_is_neg = off_reg->smin_value < 0;
bool ptr_is_dst_reg = ptr_reg == dst_reg;
u8 opcode = BPF_OP(insn->code);
@@ -2855,6 +2856,7 @@ static int sanitize_ptr_alu(struct bpf_v
alu_limit = abs(tmp_aux->alu_limit - alu_limit);
} else {
alu_state = off_is_neg ? BPF_ALU_NEG_VALUE : 0;
+ alu_state |= off_is_imm ? BPF_ALU_IMMEDIATE : 0;
alu_state |= ptr_is_dst_reg ?
BPF_ALU_SANITIZE_SRC : BPF_ALU_SANITIZE_DST;
}
@@ -6172,7 +6174,7 @@ static int fixup_bpf_calls(struct bpf_ve
const u8 code_sub = BPF_ALU64 | BPF_SUB | BPF_X;
struct bpf_insn insn_buf[16];
struct bpf_insn *patch = &insn_buf[0];
- bool issrc, isneg;
+ bool issrc, isneg, isimm;
u32 off_reg;
aux = &env->insn_aux_data[i + delta];
@@ -6183,16 +6185,21 @@ static int fixup_bpf_calls(struct bpf_ve
isneg = aux->alu_state & BPF_ALU_NEG_VALUE;
issrc = (aux->alu_state & BPF_ALU_SANITIZE) ==
BPF_ALU_SANITIZE_SRC;
+ isimm = aux->alu_state & BPF_ALU_IMMEDIATE;
off_reg = issrc ? insn->src_reg : insn->dst_reg;
- if (isneg)
- *patch++ = BPF_ALU64_IMM(BPF_MUL, off_reg, -1);
- *patch++ = BPF_MOV32_IMM(BPF_REG_AX, aux->alu_limit);
- *patch++ = BPF_ALU64_REG(BPF_SUB, BPF_REG_AX, off_reg);
- *patch++ = BPF_ALU64_REG(BPF_OR, BPF_REG_AX, off_reg);
- *patch++ = BPF_ALU64_IMM(BPF_NEG, BPF_REG_AX, 0);
- *patch++ = BPF_ALU64_IMM(BPF_ARSH, BPF_REG_AX, 63);
- *patch++ = BPF_ALU64_REG(BPF_AND, BPF_REG_AX, off_reg);
+ if (isimm) {
+ *patch++ = BPF_MOV32_IMM(BPF_REG_AX, aux->alu_limit);
+ } else {
+ if (isneg)
+ *patch++ = BPF_ALU64_IMM(BPF_MUL, off_reg, -1);
+ *patch++ = BPF_MOV32_IMM(BPF_REG_AX, aux->alu_limit);
+ *patch++ = BPF_ALU64_REG(BPF_SUB, BPF_REG_AX, off_reg);
+ *patch++ = BPF_ALU64_REG(BPF_OR, BPF_REG_AX, off_reg);
+ *patch++ = BPF_ALU64_IMM(BPF_NEG, BPF_REG_AX, 0);
+ *patch++ = BPF_ALU64_IMM(BPF_ARSH, BPF_REG_AX, 63);
+ *patch++ = BPF_ALU64_REG(BPF_AND, BPF_REG_AX, off_reg);
+ }
if (!issrc)
*patch++ = BPF_MOV64_REG(insn->dst_reg, insn->src_reg);
insn->src_reg = BPF_REG_AX;
@@ -6200,7 +6207,7 @@ static int fixup_bpf_calls(struct bpf_ve
insn->code = insn->code == code_add ?
code_sub : code_add;
*patch++ = *insn;
- if (issrc && isneg)
+ if (issrc && isneg && !isimm)
*patch++ = BPF_ALU64_IMM(BPF_MUL, off_reg, -1);
cnt = patch - insn_buf;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 056/116] bpf: Wrap aux data inside bpf_sanitize_info container
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 055/116] bpf: Fix leakage of uninitialized bpf stack under speculation Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 057/116] bpf: Fix mask direction swap upon off reg sign change Greg Kroah-Hartman
` (63 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, Piotr Krysiuk,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit 3d0220f6861d713213b015b582e9f21e5b28d2e0 upstream
Add a container structure struct bpf_sanitize_info which holds
the current aux info, and update call-sites to sanitize_ptr_alu()
to pass it in. This is needed for passing in additional state
later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2815,15 +2815,19 @@ static bool sanitize_needed(u8 opcode)
return opcode == BPF_ADD || opcode == BPF_SUB;
}
+struct bpf_sanitize_info {
+ struct bpf_insn_aux_data aux;
+};
+
static int sanitize_ptr_alu(struct bpf_verifier_env *env,
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
const struct bpf_reg_state *off_reg,
struct bpf_reg_state *dst_reg,
- struct bpf_insn_aux_data *tmp_aux,
+ struct bpf_sanitize_info *info,
const bool commit_window)
{
- struct bpf_insn_aux_data *aux = commit_window ? cur_aux(env) : tmp_aux;
+ struct bpf_insn_aux_data *aux = commit_window ? cur_aux(env) : &info->aux;
struct bpf_verifier_state *vstate = env->cur_state;
bool off_is_imm = tnum_is_const(off_reg->var_off);
bool off_is_neg = off_reg->smin_value < 0;
@@ -2852,8 +2856,8 @@ static int sanitize_ptr_alu(struct bpf_v
/* In commit phase we narrow the masking window based on
* the observed pointer move after the simulated operation.
*/
- alu_state = tmp_aux->alu_state;
- alu_limit = abs(tmp_aux->alu_limit - alu_limit);
+ alu_state = info->aux.alu_state;
+ alu_limit = abs(info->aux.alu_limit - alu_limit);
} else {
alu_state = off_is_neg ? BPF_ALU_NEG_VALUE : 0;
alu_state |= off_is_imm ? BPF_ALU_IMMEDIATE : 0;
@@ -2983,7 +2987,7 @@ static int adjust_ptr_min_max_vals(struc
smin_ptr = ptr_reg->smin_value, smax_ptr = ptr_reg->smax_value;
u64 umin_val = off_reg->umin_value, umax_val = off_reg->umax_value,
umin_ptr = ptr_reg->umin_value, umax_ptr = ptr_reg->umax_value;
- struct bpf_insn_aux_data tmp_aux = {};
+ struct bpf_sanitize_info info = {};
u8 opcode = BPF_OP(insn->code);
u32 dst = insn->dst_reg;
int ret;
@@ -3035,7 +3039,7 @@ static int adjust_ptr_min_max_vals(struc
if (sanitize_needed(opcode)) {
ret = sanitize_ptr_alu(env, insn, ptr_reg, off_reg, dst_reg,
- &tmp_aux, false);
+ &info, false);
if (ret < 0)
return sanitize_err(env, insn, ret, off_reg, dst_reg);
}
@@ -3176,7 +3180,7 @@ static int adjust_ptr_min_max_vals(struc
return -EACCES;
if (sanitize_needed(opcode)) {
ret = sanitize_ptr_alu(env, insn, dst_reg, off_reg, dst_reg,
- &tmp_aux, true);
+ &info, true);
if (ret < 0)
return sanitize_err(env, insn, ret, off_reg, dst_reg);
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 057/116] bpf: Fix mask direction swap upon off reg sign change
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 056/116] bpf: Wrap aux data inside bpf_sanitize_info container Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 058/116] bpf: No need to simulate speculative domain for immediates Greg Kroah-Hartman
` (62 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Piotr Krysiuk, Daniel Borkmann,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit bb01a1bba579b4b1c5566af24d95f1767859771e upstream
Masking direction as indicated via mask_to_left is considered to be
calculated once and then used to derive pointer limits. Thus, this
needs to be placed into bpf_sanitize_info instead so we can pass it
to sanitize_ptr_alu() call after the pointer move. Piotr noticed a
corner case where the off reg causes masking direction change which
then results in an incorrect final aux->alu_limit.
Fixes: 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask")
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2738,18 +2738,10 @@ enum {
};
static int retrieve_ptr_limit(const struct bpf_reg_state *ptr_reg,
- const struct bpf_reg_state *off_reg,
- u32 *alu_limit, u8 opcode)
+ u32 *alu_limit, bool mask_to_left)
{
- bool off_is_neg = off_reg->smin_value < 0;
- bool mask_to_left = (opcode == BPF_ADD && off_is_neg) ||
- (opcode == BPF_SUB && !off_is_neg);
u32 max = 0, ptr_limit = 0;
- if (!tnum_is_const(off_reg->var_off) &&
- (off_reg->smin_value < 0) != (off_reg->smax_value < 0))
- return REASON_BOUNDS;
-
switch (ptr_reg->type) {
case PTR_TO_STACK:
/* Offset 0 is out-of-bounds, but acceptable start for the
@@ -2817,6 +2809,7 @@ static bool sanitize_needed(u8 opcode)
struct bpf_sanitize_info {
struct bpf_insn_aux_data aux;
+ bool mask_to_left;
};
static int sanitize_ptr_alu(struct bpf_verifier_env *env,
@@ -2848,7 +2841,16 @@ static int sanitize_ptr_alu(struct bpf_v
if (vstate->speculative)
goto do_sim;
- err = retrieve_ptr_limit(ptr_reg, off_reg, &alu_limit, opcode);
+ if (!commit_window) {
+ if (!tnum_is_const(off_reg->var_off) &&
+ (off_reg->smin_value < 0) != (off_reg->smax_value < 0))
+ return REASON_BOUNDS;
+
+ info->mask_to_left = (opcode == BPF_ADD && off_is_neg) ||
+ (opcode == BPF_SUB && !off_is_neg);
+ }
+
+ err = retrieve_ptr_limit(ptr_reg, &alu_limit, info->mask_to_left);
if (err < 0)
return err;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 058/116] bpf: No need to simulate speculative domain for immediates
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 057/116] bpf: Fix mask direction swap upon off reg sign change Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 059/116] spi: gpio: Dont leak SPI master in probe error path Greg Kroah-Hartman
` (61 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, Daniel Borkmann, Piotr Krysiuk,
Alexei Starovoitov, Ovidiu Panait
From: Daniel Borkmann <daniel@iogearbox.net>
commit a7036191277f9fa68d92f2071ddc38c09b1e5ee5 upstream
In 801c6058d14a ("bpf: Fix leakage of uninitialized bpf stack under
speculation") we replaced masking logic with direct loads of immediates
if the register is a known constant. Given in this case we do not apply
any masking, there is also no reason for the operation to be truncated
under the speculative domain.
Therefore, there is also zero reason for the verifier to branch-off and
simulate this case, it only needs to do it for unknown but bounded scalars.
As a side-effect, this also enables few test cases that were previously
rejected due to simulation under zero truncation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/bpf/verifier.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2874,8 +2874,12 @@ do_sim:
/* If we're in commit phase, we're done here given we already
* pushed the truncated dst_reg into the speculative verification
* stack.
+ *
+ * Also, when register is a known constant, we rewrite register-based
+ * operation to immediate-based, and thus do not need masking (and as
+ * a consequence, do not need to simulate the zero-truncation either).
*/
- if (commit_window)
+ if (commit_window || off_is_imm)
return 0;
/* Simulate and find potential out-of-bounds access under
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 059/116] spi: gpio: Dont leak SPI master in probe error path
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 058/116] bpf: No need to simulate speculative domain for immediates Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 060/116] spi: mt7621: Disable clock " Greg Kroah-Hartman
` (60 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Linus Walleij,
Navid Emamdoost, Andrey Smirnov, Mark Brown
From: Lukas Wunner <lukas@wunner.de>
commit 7174dc655ef0578877b0b4598e69619d2be28b4d upstream.
If the call to devm_spi_register_master() fails on probe of the GPIO SPI
driver, the spi_master struct is erroneously not freed:
After allocating the spi_master, its reference count is 1. The driver
unconditionally decrements the reference count on unbind using a devm
action. Before calling devm_spi_register_master(), the driver
unconditionally increments the reference count because on success,
that function will decrement the reference count on unbind. However on
failure, devm_spi_register_master() does *not* decrement the reference
count, so the spi_master is leaked.
The issue was introduced by commits 8b797490b4db ("spi: gpio: Make sure
spi_master_put() is called in every error path") and 79567c1a321e ("spi:
gpio: Use devm_spi_register_master()"), which sought to plug leaks
introduced by 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO
descriptors") but missed this remaining leak.
The situation was later aggravated by commit d3b0ffa1d75d ("spi: gpio:
prevent memory leak in spi_gpio_probe"), which introduced a
use-after-free because it releases a reference on the spi_master if
devm_add_action_or_reset() fails even though the function already
does that.
Fix by switching over to the new devm_spi_alloc_master() helper.
Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org> # v4.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v5.1-: 8b797490b4db: spi: gpio: Make sure spi_master_put() is called in every error path
Cc: <stable@vger.kernel.org> # v5.1-: 45beec351998: spi: bitbang: Introduce spi_bitbang_init()
Cc: <stable@vger.kernel.org> # v5.1-: 79567c1a321e: spi: gpio: Use devm_spi_register_master()
Cc: <stable@vger.kernel.org> # v5.4-: d3b0ffa1d75d: spi: gpio: prevent memory leak in spi_gpio_probe
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Link: https://lore.kernel.org/r/86eaed27431c3d709e3748eb76ceecbfc790dd37.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to v4.19.192]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/spi/spi-gpio.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -382,7 +382,7 @@ static int spi_gpio_probe(struct platfor
return -ENODEV;
#endif
- master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*spi_gpio));
if (!master)
return -ENOMEM;
@@ -438,11 +438,7 @@ static int spi_gpio_probe(struct platfor
}
spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
- status = spi_bitbang_start(&spi_gpio->bitbang);
- if (status)
- spi_master_put(master);
-
- return status;
+ return spi_bitbang_start(&spi_gpio->bitbang);
}
static int spi_gpio_remove(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 060/116] spi: mt7621: Disable clock in probe error path
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 059/116] spi: gpio: Dont leak SPI master in probe error path Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 061/116] spi: mt7621: Dont leak SPI master " Greg Kroah-Hartman
` (59 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Qinglang Miao, Mark Brown
From: Lukas Wunner <lukas@wunner.de>
commit 24f7033405abe195224ec793dbc3d7a27dec0b98 upstream.
Commit 702b15cb9712 ("spi: mt7621: fix missing clk_disable_unprepare()
on error in mt7621_spi_probe") sought to disable the SYS clock on probe
errors, but only did so for 2 of 3 potentially failing calls: The clock
needs to be disabled on failure of devm_spi_register_controller() as
well.
Moreover, the commit purports to fix a bug in commit cbd66c626e16 ("spi:
mt7621: Move SPI driver out of staging") but in reality the bug has
existed since the driver was first introduced.
Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.17+: 702b15cb9712: spi: mt7621: fix missing clk_disable_unprepare() on error in mt7621_spi_probe
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/36ad42760087952fb7c10aae7d2628547c26a7ec.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to v4.19.192]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/mt7621-spi/spi-mt7621.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/staging/mt7621-spi/spi-mt7621.c
+++ b/drivers/staging/mt7621-spi/spi-mt7621.c
@@ -487,7 +487,11 @@ static int mt7621_spi_probe(struct platf
mt7621_spi_reset(rs, 0);
- return spi_register_master(master);
+ ret = spi_register_master(master);
+ if (ret)
+ clk_disable_unprepare(clk);
+
+ return ret;
}
static int mt7621_spi_remove(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 061/116] spi: mt7621: Dont leak SPI master in probe error path
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 060/116] spi: mt7621: Disable clock " Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 062/116] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails Greg Kroah-Hartman
` (58 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lukas Wunner, Stefan Roese, Mark Brown
From: Lukas Wunner <lukas@wunner.de>
commit 46b5c4fb87ce8211e0f9b0383dbde72c3652d2ba upstream.
If the calls to device_reset() or devm_spi_register_controller() fail on
probe of the MediaTek MT7621 SPI driver, the spi_controller struct is
erroneously not freed. Fix by switching over to the new
devm_spi_alloc_master() helper.
Additionally, there's an ordering issue in mt7621_spi_remove() wherein
the spi_controller is unregistered after disabling the SYS clock.
The correct order is to call spi_unregister_controller() *before* this
teardown step because bus accesses may still be ongoing until that
function returns.
All of these bugs have existed since the driver was first introduced,
so it seems fair to fix them together in a single commit.
Fixes: 1ab7f2a43558 ("staging: mt7621-spi: add mt7621 support")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: <stable@vger.kernel.org> # v4.17+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v4.17+
Link: https://lore.kernel.org/r/72b680796149f5fcda0b3f530ffb7ee73b04f224.1607286887.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to v4.19.192]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/mt7621-spi/spi-mt7621.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/mt7621-spi/spi-mt7621.c
+++ b/drivers/staging/mt7621-spi/spi-mt7621.c
@@ -452,7 +452,7 @@ static int mt7621_spi_probe(struct platf
if (status)
return status;
- master = spi_alloc_master(&pdev->dev, sizeof(*rs));
+ master = devm_spi_alloc_master(&pdev->dev, sizeof(*rs));
if (master == NULL) {
dev_info(&pdev->dev, "master allocation failed\n");
clk_disable_unprepare(clk);
@@ -502,8 +502,8 @@ static int mt7621_spi_remove(struct plat
master = dev_get_drvdata(&pdev->dev);
rs = spi_master_get_devdata(master);
- clk_disable(rs->clk);
spi_unregister_master(master);
+ clk_disable_unprepare(rs->clk);
return 0;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 062/116] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 061/116] spi: mt7621: Dont leak SPI master " Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:13 ` [PATCH 4.19 063/116] NFS: fix an incorrect limit in filelayout_decode_layout() Greg Kroah-Hartman
` (57 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thadeu Lima de Souza Cascardo,
Marcel Holtmann
From: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
commit 8da3a0b87f4f1c3a3bbc4bfb78cf68476e97d183 upstream.
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bluetooth/cmtp/core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -391,6 +391,11 @@ int cmtp_add_connection(struct cmtp_conn
if (!(session->flags & BIT(CMTP_LOOPBACK))) {
err = cmtp_attach_device(session);
if (err < 0) {
+ /* Caller will call fput in case of failure, and so
+ * will cmtp_session kthread.
+ */
+ get_file(session->sock->file);
+
atomic_inc(&session->terminate);
wake_up_interruptible(sk_sleep(session->sock->sk));
up_write(&cmtp_session_sem);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 063/116] NFS: fix an incorrect limit in filelayout_decode_layout()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 062/116] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails Greg Kroah-Hartman
@ 2021-05-31 13:13 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 064/116] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce() Greg Kroah-Hartman
` (56 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:13 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Trond Myklebust
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 769b01ea68b6c49dc3cde6adf7e53927dacbd3a8 upstream.
The "sizeof(struct nfs_fh)" is two bytes too large and could lead to
memory corruption. It should be NFS_MAXFHSIZE because that's the size
of the ->data[] buffer.
I reversed the size of the arguments to put the variable on the left.
Fixes: 16b374ca439f ("NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/filelayout/filelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -717,7 +717,7 @@ filelayout_decode_layout(struct pnfs_lay
if (unlikely(!p))
goto out_err;
fl->fh_array[i]->size = be32_to_cpup(p++);
- if (sizeof(struct nfs_fh) < fl->fh_array[i]->size) {
+ if (fl->fh_array[i]->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS: Too big fh %d received %d\n",
i, fl->fh_array[i]->size);
goto out_err;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 064/116] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2021-05-31 13:13 ` [PATCH 4.19 063/116] NFS: fix an incorrect limit in filelayout_decode_layout() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 065/116] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config Greg Kroah-Hartman
` (55 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trond Myklebust
From: Trond Myklebust <trond.myklebust@hammerspace.com>
commit 0d0ea309357dea0d85a82815f02157eb7fcda39f upstream.
The value of mirror->pg_bytes_written should only be updated after a
successful attempt to flush out the requests on the list.
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/pagelist.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -987,17 +987,16 @@ static void nfs_pageio_doio(struct nfs_p
{
struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
-
if (!list_empty(&mirror->pg_list)) {
int error = desc->pg_ops->pg_doio(desc);
if (error < 0)
desc->pg_error = error;
- else
+ if (list_empty(&mirror->pg_list)) {
mirror->pg_bytes_written += mirror->pg_count;
- }
- if (list_empty(&mirror->pg_list)) {
- mirror->pg_count = 0;
- mirror->pg_base = 0;
+ mirror->pg_count = 0;
+ mirror->pg_base = 0;
+ mirror->pg_recoalesce = 0;
+ }
}
}
@@ -1095,7 +1094,6 @@ static int nfs_do_recoalesce(struct nfs_
do {
list_splice_init(&mirror->pg_list, &head);
- mirror->pg_bytes_written -= mirror->pg_count;
mirror->pg_count = 0;
mirror->pg_base = 0;
mirror->pg_recoalesce = 0;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 065/116] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 064/116] NFS: Dont corrupt the value of pg_bytes_written in nfs_do_recoalesce() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 066/116] drm/meson: fix shutdown crash when component not probed Greg Kroah-Hartman
` (54 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Zhang Xiaoxu, Trond Myklebust
From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
commit e67afa7ee4a59584d7253e45d7f63b9528819a13 upstream.
Since commit bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.
This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.
Fixes: bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfs/nfs4file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -148,7 +148,7 @@ static loff_t nfs4_file_llseek(struct fi
case SEEK_HOLE:
case SEEK_DATA:
ret = nfs42_proc_llseek(filep, offset, whence);
- if (ret != -ENOTSUPP)
+ if (ret != -EOPNOTSUPP)
return ret;
/* Fall through */
default:
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 066/116] drm/meson: fix shutdown crash when component not probed
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 065/116] NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 067/116] net/mlx4: Fix EEPROM dump support Greg Kroah-Hartman
` (53 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefan Agner, Neil Armstrong,
Martin Blumenstingl
From: Neil Armstrong <narmstrong@baylibre.com>
commit 7cfc4ea78fc103ea51ecbacd9236abb5b1c490d2 upstream.
When main component is not probed, by example when the dw-hdmi module is
not loaded yet or in probe defer, the following crash appears on shutdown:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
pc : meson_drv_shutdown+0x24/0x50
lr : platform_drv_shutdown+0x20/0x30
...
Call trace:
meson_drv_shutdown+0x24/0x50
platform_drv_shutdown+0x20/0x30
device_shutdown+0x158/0x360
kernel_restart_prepare+0x38/0x48
kernel_restart+0x18/0x68
__do_sys_reboot+0x224/0x250
__arm64_sys_reboot+0x24/0x30
...
Simply check if the priv struct has been allocated before using it.
Fixes: fa0c16caf3d7 ("drm: meson_drv add shutdown function")
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430082744.3638743-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/meson/meson_drv.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -387,11 +387,12 @@ static int meson_probe_remote(struct pla
static void meson_drv_shutdown(struct platform_device *pdev)
{
struct meson_drm *priv = dev_get_drvdata(&pdev->dev);
- struct drm_device *drm = priv->drm;
- DRM_DEBUG_DRIVER("\n");
- drm_kms_helper_poll_fini(drm);
- drm_atomic_helper_shutdown(drm);
+ if (!priv)
+ return;
+
+ drm_kms_helper_poll_fini(priv->drm);
+ drm_atomic_helper_shutdown(priv->drm);
}
static int meson_drv_probe(struct platform_device *pdev)
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 067/116] net/mlx4: Fix EEPROM dump support
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 066/116] drm/meson: fix shutdown crash when component not probed Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 068/116] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" Greg Kroah-Hartman
` (52 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladyslav Tarasiuk, Tariq Toukan,
David S. Miller
From: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
commit db825feefc6868896fed5e361787ba3bee2fd906 upstream.
Fix SFP and QSFP* EEPROM queries by setting i2c_address, offset and page
number correctly. For SFP set the following params:
- I2C address for offsets 0-255 is 0x50. For 256-511 - 0x51.
- Page number is zero.
- Offset is 0-255.
At the same time, QSFP* parameters are different:
- I2C address is always 0x50.
- Page number is not limited to zero.
- Offset is 0-255 for page zero and 128-255 for others.
To set parameters accordingly to cable used, implement function to query
module ID and implement respective helper functions to set parameters
correctly.
Fixes: 135dd9594f12 ("net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query")
Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4
drivers/net/ethernet/mellanox/mlx4/port.c | 107 +++++++++++++++++++++++-
2 files changed, 104 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -2011,8 +2011,6 @@ static int mlx4_en_set_tunable(struct ne
return ret;
}
-#define MLX4_EEPROM_PAGE_LEN 256
-
static int mlx4_en_get_module_info(struct net_device *dev,
struct ethtool_modinfo *modinfo)
{
@@ -2047,7 +2045,7 @@ static int mlx4_en_get_module_info(struc
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
- modinfo->eeprom_len = MLX4_EEPROM_PAGE_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
break;
default:
return -EINVAL;
--- a/drivers/net/ethernet/mellanox/mlx4/port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/port.c
@@ -1973,6 +1973,7 @@ EXPORT_SYMBOL(mlx4_get_roce_gid_from_sla
#define I2C_ADDR_LOW 0x50
#define I2C_ADDR_HIGH 0x51
#define I2C_PAGE_SIZE 256
+#define I2C_HIGH_PAGE_SIZE 128
/* Module Info Data */
struct mlx4_cable_info {
@@ -2026,6 +2027,88 @@ static inline const char *cable_info_mad
return "Unknown Error";
}
+static int mlx4_get_module_id(struct mlx4_dev *dev, u8 port, u8 *module_id)
+{
+ struct mlx4_cmd_mailbox *inbox, *outbox;
+ struct mlx4_mad_ifc *inmad, *outmad;
+ struct mlx4_cable_info *cable_info;
+ int ret;
+
+ inbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inbox))
+ return PTR_ERR(inbox);
+
+ outbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outbox)) {
+ mlx4_free_cmd_mailbox(dev, inbox);
+ return PTR_ERR(outbox);
+ }
+
+ inmad = (struct mlx4_mad_ifc *)(inbox->buf);
+ outmad = (struct mlx4_mad_ifc *)(outbox->buf);
+
+ inmad->method = 0x1; /* Get */
+ inmad->class_version = 0x1;
+ inmad->mgmt_class = 0x1;
+ inmad->base_version = 0x1;
+ inmad->attr_id = cpu_to_be16(0xFF60); /* Module Info */
+
+ cable_info = (struct mlx4_cable_info *)inmad->data;
+ cable_info->dev_mem_address = 0;
+ cable_info->page_num = 0;
+ cable_info->i2c_addr = I2C_ADDR_LOW;
+ cable_info->size = cpu_to_be16(1);
+
+ ret = mlx4_cmd_box(dev, inbox->dma, outbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C,
+ MLX4_CMD_NATIVE);
+ if (ret)
+ goto out;
+
+ if (be16_to_cpu(outmad->status)) {
+ /* Mad returned with bad status */
+ ret = be16_to_cpu(outmad->status);
+ mlx4_warn(dev,
+ "MLX4_CMD_MAD_IFC Get Module ID attr(%x) port(%d) i2c_addr(%x) offset(%d) size(%d): Response Mad Status(%x) - %s\n",
+ 0xFF60, port, I2C_ADDR_LOW, 0, 1, ret,
+ cable_info_mad_err_str(ret));
+ ret = -ret;
+ goto out;
+ }
+ cable_info = (struct mlx4_cable_info *)outmad->data;
+ *module_id = cable_info->data[0];
+out:
+ mlx4_free_cmd_mailbox(dev, inbox);
+ mlx4_free_cmd_mailbox(dev, outbox);
+ return ret;
+}
+
+static void mlx4_sfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ *i2c_addr = I2C_ADDR_LOW;
+ *page_num = 0;
+
+ if (*offset < I2C_PAGE_SIZE)
+ return;
+
+ *i2c_addr = I2C_ADDR_HIGH;
+ *offset -= I2C_PAGE_SIZE;
+}
+
+static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset)
+{
+ /* Offsets 0-255 belong to page 0.
+ * Offsets 256-639 belong to pages 01, 02, 03.
+ * For example, offset 400 is page 02: 1 + (400 - 256) / 128 = 2
+ */
+ if (*offset < I2C_PAGE_SIZE)
+ *page_num = 0;
+ else
+ *page_num = 1 + (*offset - I2C_PAGE_SIZE) / I2C_HIGH_PAGE_SIZE;
+ *i2c_addr = I2C_ADDR_LOW;
+ *offset -= *page_num * I2C_HIGH_PAGE_SIZE;
+}
+
/**
* mlx4_get_module_info - Read cable module eeprom data
* @dev: mlx4_dev.
@@ -2045,12 +2128,30 @@ int mlx4_get_module_info(struct mlx4_dev
struct mlx4_cmd_mailbox *inbox, *outbox;
struct mlx4_mad_ifc *inmad, *outmad;
struct mlx4_cable_info *cable_info;
- u16 i2c_addr;
+ u8 module_id, i2c_addr, page_num;
int ret;
if (size > MODULE_INFO_MAX_READ)
size = MODULE_INFO_MAX_READ;
+ ret = mlx4_get_module_id(dev, port, &module_id);
+ if (ret)
+ return ret;
+
+ switch (module_id) {
+ case MLX4_MODULE_ID_SFP:
+ mlx4_sfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ case MLX4_MODULE_ID_QSFP:
+ case MLX4_MODULE_ID_QSFP_PLUS:
+ case MLX4_MODULE_ID_QSFP28:
+ mlx4_qsfp_eeprom_params_set(&i2c_addr, &page_num, &offset);
+ break;
+ default:
+ mlx4_err(dev, "Module ID not recognized: %#x\n", module_id);
+ return -EINVAL;
+ }
+
inbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(inbox))
return PTR_ERR(inbox);
@@ -2076,11 +2177,9 @@ int mlx4_get_module_info(struct mlx4_dev
*/
size -= offset + size - I2C_PAGE_SIZE;
- i2c_addr = I2C_ADDR_LOW;
-
cable_info = (struct mlx4_cable_info *)inmad->data;
cable_info->dev_mem_address = cpu_to_be16(offset);
- cable_info->page_num = 0;
+ cable_info->page_num = page_num;
cable_info->i2c_addr = i2c_addr;
cable_info->size = cpu_to_be16(size);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 068/116] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 067/116] net/mlx4: Fix EEPROM dump support Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 069/116] tipc: skb_linearize the head skb when reassembling msgs Greg Kroah-Hartman
` (51 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jon Maloy, Tung Nguyen, Hoang Le,
David S. Miller
From: Hoang Le <hoang.h.le@dektech.com.au>
commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.
This reverts commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046.
Above fix is not correct and caused memory leak issue.
Fixes: 6bf24dc0cc0c ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/socket.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1187,7 +1187,10 @@ void tipc_sk_mcast_rcv(struct net *net,
spin_lock_bh(&inputq->lock);
if (skb_peek(arrvq) == skb) {
skb_queue_splice_tail_init(&tmpq, inputq);
- __skb_dequeue(arrvq);
+ /* Decrease the skb's refcnt as increasing in the
+ * function tipc_skb_peek
+ */
+ kfree_skb(__skb_dequeue(arrvq));
}
spin_unlock_bh(&inputq->lock);
__skb_queue_purge(&tmpq);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 069/116] tipc: skb_linearize the head skb when reassembling msgs
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 068/116] Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv" Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 070/116] net: dsa: mt7530: fix VLAN traffic leaks Greg Kroah-Hartman
` (50 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Li Shuang, Xin Long, Jon Maloy,
David S. Miller
From: Xin Long <lucien.xin@gmail.com>
commit b7df21cf1b79ab7026f545e7bf837bd5750ac026 upstream.
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175ce ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/msg.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -141,18 +141,13 @@ int tipc_buf_append(struct sk_buff **hea
if (unlikely(head))
goto err;
*buf = NULL;
+ if (skb_has_frag_list(frag) && __skb_linearize(frag))
+ goto err;
frag = skb_unshare(frag, GFP_ATOMIC);
if (unlikely(!frag))
goto err;
head = *headbuf = frag;
TIPC_SKB_CB(head)->tail = NULL;
- if (skb_is_nonlinear(head)) {
- skb_walk_frags(head, tail) {
- TIPC_SKB_CB(head)->tail = tail;
- }
- } else {
- skb_frag_list_init(head);
- }
return 0;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 070/116] net: dsa: mt7530: fix VLAN traffic leaks
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 069/116] tipc: skb_linearize the head skb when reassembling msgs Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 071/116] net: dsa: fix a crash if ->get_sset_count() fails Greg Kroah-Hartman
` (49 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, DENG Qingfang, Florian Fainelli,
David S. Miller
From: DENG Qingfang <dqfext@gmail.com>
commit 474a2ddaa192777522a7499784f1d60691cd831a upstream.
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/mt7530.c | 8 --------
1 file changed, 8 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -851,14 +851,6 @@ mt7530_port_set_vlan_aware(struct dsa_sw
{
struct mt7530_priv *priv = ds->priv;
- /* The real fabric path would be decided on the membership in the
- * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS
- * means potential VLAN can be consisting of certain subset of all
- * ports.
- */
- mt7530_rmw(priv, MT7530_PCR_P(port),
- PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
-
/* Trapped into security mode allows packet forwarding through VLAN
* table lookup. CPU port is set to fallback mode to let untagged
* frames pass through.
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 071/116] net: dsa: fix a crash if ->get_sset_count() fails
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 070/116] net: dsa: mt7530: fix VLAN traffic leaks Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 072/116] i2c: s3c2410: fix possible NULL pointer deref on read message after write Greg Kroah-Hartman
` (48 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Andrew Lunn,
Florian Fainelli, Vladimir Oltean, David S. Miller
From: Dan Carpenter <dan.carpenter@oracle.com>
commit a269333fa5c0c8e53c92b5a28a6076a28cde3e83 upstream.
If ds->ops->get_sset_count() fails then it "count" is a negative error
code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative
error code is type promoted to a very high value and the loop will
corrupt memory until the system crashes.
Fix this by checking for error codes and changing the type of "i" to
just int.
Fixes: badf3ada60ab ("net: dsa: Provide CPU port statistics to master netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/dsa/master.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -87,8 +87,7 @@ static void dsa_master_get_strings(struc
struct dsa_switch *ds = cpu_dp->ds;
int port = cpu_dp->index;
int len = ETH_GSTRING_LEN;
- int mcount = 0, count;
- unsigned int i;
+ int mcount = 0, count, i;
uint8_t pfx[4];
uint8_t *ndata;
@@ -118,6 +117,8 @@ static void dsa_master_get_strings(struc
*/
ds->ops->get_strings(ds, port, stringset, ndata);
count = ds->ops->get_sset_count(ds, port, stringset);
+ if (count < 0)
+ return;
for (i = 0; i < count; i++) {
memmove(ndata + (i * len + sizeof(pfx)),
ndata + i * len, len - sizeof(pfx));
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 072/116] i2c: s3c2410: fix possible NULL pointer deref on read message after write
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 071/116] net: dsa: fix a crash if ->get_sset_count() fails Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 073/116] i2c: i801: Dont generate an interrupt on bus reset Greg Kroah-Hartman
` (47 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Wolfram Sang
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
commit 24990423267ec283b9d86f07f362b753eb9b0ed5 upstream.
Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained. However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller. At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction". This stop results in clearing the
message queue (i2c->msg = NULL).
The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.
The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
if (!is_msgend(i2c)) {
2. Condition !is_lastmsg(i2c), taking true branch.
} else if (!is_lastmsg(i2c)) {
3. Condition i2c->msg->flags & 1, taking true branch.
if (i2c->msg->flags & I2C_M_RD) {
4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
s3c24xx_i2c_stop(i2c, -EINVAL);
5. Jumping to label retry_write.
goto retry_write;
6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
if (!is_msgend(i2c)) {"
All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning). This seems a reasonable choice also here
since message buffer was entirely emptied.
Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-s3c2410.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -493,7 +493,10 @@ static int i2c_s3c_irq_nextbyte(struct s
* forces us to send a new START
* when we change direction
*/
+ dev_dbg(i2c->dev,
+ "missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
+ break;
}
goto retry_write;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 073/116] i2c: i801: Dont generate an interrupt on bus reset
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 072/116] i2c: s3c2410: fix possible NULL pointer deref on read message after write Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 074/116] perf jevents: Fix getting maximum number of fds Greg Kroah-Hartman
` (46 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+b4d3fd1dfd53e90afd79,
Jean Delvare, Andy Shevchenko, Jarkko Nikula, Wolfram Sang
From: Jean Delvare <jdelvare@suse.de>
commit e4d8716c3dcec47f1557024add24e1f3c09eb24b upstream.
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.
Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-i801.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -384,11 +384,9 @@ static int i801_check_post(struct i801_p
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
- SMBHSTCNT(priv));
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
- SMBHSTCNT(priv));
+ outb_p(0, SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 074/116] perf jevents: Fix getting maximum number of fds
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 073/116] i2c: i801: Dont generate an interrupt on bus reset Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 075/116] platform/x86: hp_accel: Avoid invoking _INI to speed up resume Greg Kroah-Hartman
` (45 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Felix Fietkau, Alexander Shishkin,
Andi Kleen, Jiri Olsa, Mark Rutland, Namhyung Kim,
Peter Zijlstra, Sukadev Bhattiprolu, Arnaldo Carvalho de Melo
From: Felix Fietkau <nbd@nbd.name>
commit 75ea44e356b5de8c817f821c9dd68ae329e82add upstream.
On some hosts, rlim.rlim_max can be returned as RLIM_INFINITY.
By casting it to int, it is interpreted as -1, which will cause get_maxfds
to return 0, causing "Invalid argument" errors in nftw() calls.
Fix this by casting the second argument of min() to rlim_t instead.
Fixes: 80eeb67fe577 ("perf jevents: Program to convert JSON file")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210525160758.97829-1-nbd@nbd.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/pmu-events/jevents.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/pmu-events/jevents.c
+++ b/tools/perf/pmu-events/jevents.c
@@ -858,7 +858,7 @@ static int get_maxfds(void)
struct rlimit rlim;
if (getrlimit(RLIMIT_NOFILE, &rlim) == 0)
- return min((int)rlim.rlim_max / 2, 512);
+ return min(rlim.rlim_max / 2, (rlim_t)512);
return 512;
}
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 075/116] platform/x86: hp_accel: Avoid invoking _INI to speed up resume
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 074/116] perf jevents: Fix getting maximum number of fds Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 076/116] serial: max310x: unregister uart driver in case of failure and abort Greg Kroah-Hartman
` (44 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Éric Piel,
Hans de Goede, Sasha Levin
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 79d341e26ebcdbc622348aaaab6f8f89b6fdb25f ]
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Éric Piel <eric.piel@trempplin-utc.net>
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/misc/lis3lv02d/lis3lv02d.h | 1 +
drivers/platform/x86/hp_accel.c | 22 +++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index c439c827eea8..0ef759671b54 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -284,6 +284,7 @@ struct lis3lv02d {
int regs_size;
u8 *reg_cache;
bool regs_stored;
+ bool init_required;
u8 odr_mask; /* ODR bit mask */
u8 whoami; /* indicates measurement precision */
s16 (*read_data) (struct lis3lv02d *lis3, int reg);
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 7b12abe86b94..9c3c83ef445b 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -101,6 +101,9 @@ MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
static int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
{
struct acpi_device *dev = lis3->bus_priv;
+ if (!lis3->init_required)
+ return 0;
+
if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI,
NULL, NULL) != AE_OK)
return -EINVAL;
@@ -367,6 +370,7 @@ static int lis3lv02d_add(struct acpi_device *device)
}
/* call the core layer do its init */
+ lis3_dev.init_required = true;
ret = lis3lv02d_init_device(&lis3_dev);
if (ret)
return ret;
@@ -414,11 +418,27 @@ static int lis3lv02d_suspend(struct device *dev)
static int lis3lv02d_resume(struct device *dev)
{
+ lis3_dev.init_required = false;
+ lis3lv02d_poweron(&lis3_dev);
+ return 0;
+}
+
+static int lis3lv02d_restore(struct device *dev)
+{
+ lis3_dev.init_required = true;
lis3lv02d_poweron(&lis3_dev);
return 0;
}
-static SIMPLE_DEV_PM_OPS(hp_accel_pm, lis3lv02d_suspend, lis3lv02d_resume);
+static const struct dev_pm_ops hp_accel_pm = {
+ .suspend = lis3lv02d_suspend,
+ .resume = lis3lv02d_resume,
+ .freeze = lis3lv02d_suspend,
+ .thaw = lis3lv02d_resume,
+ .poweroff = lis3lv02d_suspend,
+ .restore = lis3lv02d_restore,
+};
+
#define HP_ACCEL_PM (&hp_accel_pm)
#else
#define HP_ACCEL_PM NULL
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 076/116] serial: max310x: unregister uart driver in case of failure and abort
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 075/116] platform/x86: hp_accel: Avoid invoking _INI to speed up resume Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 077/116] net: fujitsu: fix potential null-ptr-deref Greg Kroah-Hartman
` (43 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Slaby, Atul Gopinathan, Sasha Levin
From: Atul Gopinathan <atulgopinathan@gmail.com>
[ Upstream commit 3890e3dea315f1a257d1b940a2a4e2fa16a7b095 ]
The macro "spi_register_driver" invokes the function
"__spi_register_driver()" which has a return type of int and can fail,
returning a negative value in such a case. This is currently ignored and
the init() function yields success even if the spi driver failed to
register.
Fix this by collecting the return value of "__spi_register_driver()" and
also unregister the uart driver in case of failure.
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/tty/serial/max310x.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 0c35c3c5e373..c1ab0dbda8a9 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1480,10 +1480,12 @@ static int __init max310x_uart_init(void)
return ret;
#ifdef CONFIG_SPI_MASTER
- spi_register_driver(&max310x_spi_driver);
+ ret = spi_register_driver(&max310x_spi_driver);
+ if (ret)
+ uart_unregister_driver(&max310x_uart);
#endif
- return 0;
+ return ret;
}
module_init(max310x_uart_init);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 077/116] net: fujitsu: fix potential null-ptr-deref
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 076/116] serial: max310x: unregister uart driver in case of failure and abort Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 078/116] net: caif: remove BUG_ON(dev == NULL) in caif_xmit Greg Kroah-Hartman
` (42 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Dominik Brodowski,
Anirudh Rayabharam, Sasha Levin
From: Anirudh Rayabharam <mail@anirudhrb.com>
[ Upstream commit 52202be1cd996cde6e8969a128dc27ee45a7cb5e ]
In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer
deref. To fix this, check the return value of ioremap and return -1
to the caller in case of failure.
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/fujitsu/fmvj18x_cs.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index a69cd19a55ae..b8fc9bbeca2c 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -547,6 +547,11 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
return -1;
base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
+ if (!base) {
+ pcmcia_release_window(link, link->resource[2]);
+ return -1;
+ }
+
pcmcia_map_mem_page(link, link->resource[2], 0);
/*
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 078/116] net: caif: remove BUG_ON(dev == NULL) in caif_xmit
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 077/116] net: fujitsu: fix potential null-ptr-deref Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 079/116] char: hpet: add checks after calling ioremap Greg Kroah-Hartman
` (41 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Du Cheng, Sasha Levin
From: Du Cheng <ducheng2@gmail.com>
[ Upstream commit 65a67792e3416f7c5d7daa47d99334cbb19a7449 ]
The condition of dev == NULL is impossible in caif_xmit(), hence it is
for the removal.
Explanation:
The static caif_xmit() is only called upon via a function pointer
`ndo_start_xmit` defined in include/linux/netdevice.h:
```
struct net_device_ops {
...
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
...
}
```
The exhausive list of call points are:
```
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c
dev->netdev_ops->ndo_start_xmit(skb, dev);
^ ^
drivers/infiniband/ulp/opa_vnic/opa_vnic_netdev.c
struct opa_vnic_adapter *adapter = opa_vnic_priv(netdev);
^ ^
return adapter->rn_ops->ndo_start_xmit(skb, netdev); // adapter would crash first
^ ^
drivers/usb/gadget/function/f_ncm.c
ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev);
^ ^
include/linux/netdevice.h
static inline netdev_tx_t __netdev_start_xmit(...
{
return ops->ndo_start_xmit(skb, dev);
^
}
const struct net_device_ops *ops = dev->netdev_ops;
^
rc = __netdev_start_xmit(ops, skb, dev, more);
^
```
In each of the enumerated scenarios, it is impossible for the NULL-valued dev to
reach the caif_xmit() without crashing the kernel earlier, therefore `BUG_ON(dev ==
NULL)` is rather useless, hence the removal.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-20-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/caif/caif_serial.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index a0f954f36c09..94d5ce9419ca 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -279,7 +279,6 @@ static int caif_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ser_device *ser;
- BUG_ON(dev == NULL);
ser = netdev_priv(dev);
/* Send flow off once, on high water mark */
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 079/116] char: hpet: add checks after calling ioremap
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 078/116] net: caif: remove BUG_ON(dev == NULL) in caif_xmit Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 080/116] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
` (40 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tom Seewald, Sasha Levin
From: Tom Seewald <tseewald@gmail.com>
[ Upstream commit b11701c933112d49b808dee01cb7ff854ba6a77a ]
The function hpet_resources() calls ioremap() two times, but in both
cases it does not check if ioremap() returned a null pointer. Fix this
by adding null pointer checks and returning an appropriate error.
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-30-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/char/hpet.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index c0732f032248..68f02318cee3 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -975,6 +975,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
if (ACPI_SUCCESS(status)) {
hdp->hd_phys_address = addr.address.minimum;
hdp->hd_address = ioremap(addr.address.minimum, addr.address.address_length);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
@@ -988,6 +990,8 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data)
hdp->hd_phys_address = fixmem32->address;
hdp->hd_address = ioremap(fixmem32->address,
HPET_RANGE_SIZE);
+ if (!hdp->hd_address)
+ return AE_ERROR;
if (hpet_is_known(hdp)) {
iounmap(hdp->hd_address);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 080/116] ALSA: sb8: Add a comment note regarding an unused pointer
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 079/116] char: hpet: add checks after calling ioremap Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 081/116] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io Greg Kroah-Hartman
` (39 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Atul Gopinathan, Sasha Levin
From: Atul Gopinathan <atulgopinathan@gmail.com>
[ Upstream commit a28591f61b60fac820c6de59826ffa710e5e314e ]
The field "fm_res" of "struct snd_sb8" is never used/dereferenced
throughout the sb8.c code. Therefore there is no need for any null value
check after the "request_region()".
Add a comment note to make developers know about this and prevent any
"NULL check" patches on this part of code.
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-36-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/isa/sb/sb8.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c
index d77dcba276b5..b0ef47bc6521 100644
--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -109,7 +109,11 @@ static int snd_sb8_probe(struct device *pdev, unsigned int dev)
acard = card->private_data;
card->private_free = snd_sb8_free;
- /* block the 0x388 port to avoid PnP conflicts */
+ /*
+ * Block the 0x388 port to avoid PnP conflicts.
+ * No need to check this value after request_region,
+ * as we never do anything with it.
+ */
acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
if (port[dev] != SNDRV_AUTO_PORT) {
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 081/116] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 080/116] ALSA: sb8: Add a comment note regarding an unused pointer Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 082/116] dmaengine: qcom_hidma: comment platform_driver_register call Greg Kroah-Hartman
` (38 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David S. Miller, Phillip Potter, Sasha Levin
From: Phillip Potter <phil@philpotter.co.uk>
[ Upstream commit c446f0d4702d316e1c6bf621f70e79678d28830a ]
Move hw->cfg.mode and hw->addr.mode assignments from hw->ci->cfg_mode
and hw->ci->addr_mode respectively, to be before the subsequent checks
for memory IO mode (and possible ioremap calls in this case).
Also introduce ioremap error checks at both locations. This allows
resources to be properly freed on ioremap failure, as when the caller
of setup_io then subsequently calls release_io via its error path,
release_io can now correctly determine the mode as it has been set
before the ioremap call.
Finally, refactor release_io function so that it will call
release_mem_region in the memory IO case, regardless of whether or not
hw->cfg.p/hw->addr.p are NULL. This means resources are then properly
released on failure.
This properly implements the original reverted commit (d721fe99f6ad)
from the University of Minnesota, whilst also implementing the ioremap
check for the hw->ci->cfg_mode if block as well.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-42-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/isdn/hardware/mISDN/mISDNinfineon.c | 24 ++++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index 3e01012be4ab..95a0d728eecc 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -645,17 +645,19 @@ static void
release_io(struct inf_hw *hw)
{
if (hw->cfg.mode) {
- if (hw->cfg.p) {
+ if (hw->cfg.mode == AM_MEMIO) {
release_mem_region(hw->cfg.start, hw->cfg.size);
- iounmap(hw->cfg.p);
+ if (hw->cfg.p)
+ iounmap(hw->cfg.p);
} else
release_region(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = AM_NONE;
}
if (hw->addr.mode) {
- if (hw->addr.p) {
+ if (hw->addr.mode == AM_MEMIO) {
release_mem_region(hw->addr.start, hw->addr.size);
- iounmap(hw->addr.p);
+ if (hw->addr.p)
+ iounmap(hw->addr.p);
} else
release_region(hw->addr.start, hw->addr.size);
hw->addr.mode = AM_NONE;
@@ -685,9 +687,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->cfg.start, (ulong)hw->cfg.size);
return err;
}
- if (hw->ci->cfg_mode == AM_MEMIO)
- hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
hw->cfg.mode = hw->ci->cfg_mode;
+ if (hw->ci->cfg_mode == AM_MEMIO) {
+ hw->cfg.p = ioremap(hw->cfg.start, hw->cfg.size);
+ if (!hw->cfg.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO cfg %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->cfg.start,
@@ -712,9 +717,12 @@ setup_io(struct inf_hw *hw)
(ulong)hw->addr.start, (ulong)hw->addr.size);
return err;
}
- if (hw->ci->addr_mode == AM_MEMIO)
- hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
hw->addr.mode = hw->ci->addr_mode;
+ if (hw->ci->addr_mode == AM_MEMIO) {
+ hw->addr.p = ioremap(hw->addr.start, hw->addr.size);
+ if (!hw->addr.p)
+ return -ENOMEM;
+ }
if (debug & DEBUG_HW)
pr_notice("%s: IO addr %lx (%lu bytes) mode%d\n",
hw->name, (ulong)hw->addr.start,
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 082/116] dmaengine: qcom_hidma: comment platform_driver_register call
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 081/116] isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 083/116] libertas: register sysfs groups properly Greg Kroah-Hartman
` (37 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vinod Koul, Sinan Kaya,
Phillip Potter, Sasha Levin
From: Phillip Potter <phil@philpotter.co.uk>
[ Upstream commit 4df2a8b0ad634d98a67e540a4e18a60f943e7d9f ]
Place a comment in hidma_mgmt_init explaining why success must
currently be assumed, due to the cleanup issue that would need to
be considered were this module ever to be unloadable or were this
platform_driver_register call ever to fail.
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-By: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-52-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/qcom/hidma_mgmt.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index d64edeb6771a..f9640e37b139 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -423,6 +423,20 @@ static int __init hidma_mgmt_init(void)
hidma_mgmt_of_populate_channels(child);
}
#endif
+ /*
+ * We do not check for return value here, as it is assumed that
+ * platform_driver_register must not fail. The reason for this is that
+ * the (potential) hidma_mgmt_of_populate_channels calls above are not
+ * cleaned up if it does fail, and to do this work is quite
+ * complicated. In particular, various calls of of_address_to_resource,
+ * of_irq_to_resource, platform_device_register_full, of_dma_configure,
+ * and of_msi_configure which then call other functions and so on, must
+ * be cleaned up - this is not a trivial exercise.
+ *
+ * Currently, this module is not intended to be unloaded, and there is
+ * no module_exit function defined which does the needed cleanup. For
+ * this reason, we have to assume success here.
+ */
platform_driver_register(&hidma_mgmt_driver);
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 083/116] libertas: register sysfs groups properly
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 082/116] dmaengine: qcom_hidma: comment platform_driver_register call Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 084/116] ASoC: cs43130: handle errors in cs43130_probe() properly Greg Kroah-Hartman
` (36 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kalle Valo, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ]
The libertas driver was trying to register sysfs groups "by hand" which
causes them to be created _after_ the device is initialized and
announced to userspace, which causes races and can prevent userspace
tools from seeing the sysfs files correctly.
Fix this up by using the built-in sysfs_groups pointers in struct
net_device which were created for this very reason, fixing the race
condition, and properly allowing for any error that might have occured
to be handled properly.
Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-54-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/marvell/libertas/mesh.c | 28 +++-----------------
1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index b0cb16ef8d1d..b313c78e2154 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -793,19 +793,6 @@ static const struct attribute_group mesh_ie_group = {
.attrs = mesh_ie_attrs,
};
-static void lbs_persist_config_init(struct net_device *dev)
-{
- int ret;
- ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
- ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
-static void lbs_persist_config_remove(struct net_device *dev)
-{
- sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
- sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
/***************************************************************************
* Initializing and starting, stopping mesh
@@ -1005,6 +992,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
+ mesh_dev->sysfs_groups[0] = &lbs_mesh_attr_group;
+ mesh_dev->sysfs_groups[1] = &boot_opts_group;
+ mesh_dev->sysfs_groups[2] = &mesh_ie_group;
+
/* Register virtual mesh interface */
ret = register_netdev(mesh_dev);
if (ret) {
@@ -1012,19 +1003,10 @@ static int lbs_add_mesh(struct lbs_private *priv)
goto err_free_netdev;
}
- ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- if (ret)
- goto err_unregister;
-
- lbs_persist_config_init(mesh_dev);
-
/* Everything successful */
ret = 0;
goto done;
-err_unregister:
- unregister_netdev(mesh_dev);
-
err_free_netdev:
free_netdev(mesh_dev);
@@ -1045,8 +1027,6 @@ void lbs_remove_mesh(struct lbs_private *priv)
netif_stop_queue(mesh_dev);
netif_carrier_off(mesh_dev);
- sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
- lbs_persist_config_remove(mesh_dev);
unregister_netdev(mesh_dev);
priv->mesh_dev = NULL;
kfree(mesh_dev->ieee80211_ptr);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 084/116] ASoC: cs43130: handle errors in cs43130_probe() properly
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 083/116] libertas: register sysfs groups properly Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 085/116] media: dvb: Add check on sp8870_readreg return Greg Kroah-Hartman
` (35 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mark Brown, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ]
cs43130_probe() does not do any valid error checking of things it
initializes, OR what it does, it does not unwind properly if there are
errors.
Fix this up by moving the sysfs files to an attribute group so the
driver core will correctly add/remove them all at once and handle errors
with them, and correctly check for creating a new workqueue and
unwinding if that fails.
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/cs43130.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c
index 80dc42197154..cf29dec28b5e 100644
--- a/sound/soc/codecs/cs43130.c
+++ b/sound/soc/codecs/cs43130.c
@@ -1738,6 +1738,14 @@ static DEVICE_ATTR(hpload_dc_r, 0444, cs43130_show_dc_r, NULL);
static DEVICE_ATTR(hpload_ac_l, 0444, cs43130_show_ac_l, NULL);
static DEVICE_ATTR(hpload_ac_r, 0444, cs43130_show_ac_r, NULL);
+static struct attribute *hpload_attrs[] = {
+ &dev_attr_hpload_dc_l.attr,
+ &dev_attr_hpload_dc_r.attr,
+ &dev_attr_hpload_ac_l.attr,
+ &dev_attr_hpload_ac_r.attr,
+};
+ATTRIBUTE_GROUPS(hpload);
+
static struct reg_sequence hp_en_cal_seq[] = {
{CS43130_INT_MASK_4, CS43130_INT_MASK_ALL},
{CS43130_HP_MEAS_LOAD_1, 0},
@@ -2305,23 +2313,15 @@ static int cs43130_probe(struct snd_soc_component *component)
cs43130->hpload_done = false;
if (cs43130->dc_meas) {
- ret = device_create_file(component->dev, &dev_attr_hpload_dc_l);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_dc_r);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_ac_l);
- if (ret < 0)
- return ret;
-
- ret = device_create_file(component->dev, &dev_attr_hpload_ac_r);
- if (ret < 0)
+ ret = sysfs_create_groups(&component->dev->kobj, hpload_groups);
+ if (ret)
return ret;
cs43130->wq = create_singlethread_workqueue("cs43130_hp");
+ if (!cs43130->wq) {
+ sysfs_remove_groups(&component->dev->kobj, hpload_groups);
+ return -ENOMEM;
+ }
INIT_WORK(&cs43130->work, cs43130_imp_meas);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 085/116] media: dvb: Add check on sp8870_readreg return
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 084/116] ASoC: cs43130: handle errors in cs43130_probe() properly Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 086/116] media: gspca: properly check for errors in po1030_probe() Greg Kroah-Hartman
` (34 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sean Young, Mauro Carvalho Chehab,
Alaa Emad, Sasha Levin
From: Alaa Emad <alaaemadhossney.ae@gmail.com>
[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]
The function sp8870_readreg returns a negative value when i2c_transfer
fails so properly check for this and return the error if it happens.
Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Alaa Emad <alaaemadhossney.ae@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-60-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/dvb-frontends/sp8870.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index 8d31cf3f4f07..3a577788041d 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -293,7 +293,9 @@ static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
sp8870_writereg(state, 0xc05, reg0xc05);
// read status reg in order to clear pending irqs
- sp8870_readreg(state, 0x200);
+ err = sp8870_readreg(state, 0x200);
+ if (err < 0)
+ return err;
// system controller start
sp8870_microcontroller_start(state);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 086/116] media: gspca: properly check for errors in po1030_probe()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 085/116] media: dvb: Add check on sp8870_readreg return Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 087/116] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic Greg Kroah-Hartman
` (33 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mauro Carvalho Chehab, Sasha Levin
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]
If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to
initialize the device but return the error to the calling funtion.
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-64-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/usb/gspca/m5602/m5602_po1030.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c
index 37d2891e5f5b..81d8eb72ac41 100644
--- a/drivers/media/usb/gspca/m5602/m5602_po1030.c
+++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c
@@ -159,6 +159,7 @@ static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
int po1030_probe(struct sd *sd)
{
u8 dev_id_h = 0, i;
+ int err;
struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
if (force_sensor) {
@@ -177,10 +178,13 @@ int po1030_probe(struct sd *sd)
for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
u8 data = preinit_po1030[i][2];
if (preinit_po1030[i][0] == SENSOR)
- m5602_write_sensor(sd,
- preinit_po1030[i][1], &data, 1);
+ err = m5602_write_sensor(sd, preinit_po1030[i][1],
+ &data, 1);
else
- m5602_write_bridge(sd, preinit_po1030[i][1], data);
+ err = m5602_write_bridge(sd, preinit_po1030[i][1],
+ data);
+ if (err < 0)
+ return err;
}
if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 087/116] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 086/116] media: gspca: properly check for errors in po1030_probe() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 088/116] openrisc: Define memory barrier mb Greg Kroah-Hartman
` (32 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Khalid Aziz, Matt Wang,
Martin K. Petersen, Sasha Levin
From: Matt Wang <wwentao@vmware.com>
[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]
Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems. With this commit,
64-bit kernel will enumerate 8*15 non-existing disks. This is caused
by the broken CCB structure. The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB. This leads to incorrect response to INQUIRY
commands during enumeration.
Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.
Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/BusLogic.c | 6 +++---
drivers/scsi/BusLogic.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 0d4ffe0ae306..79b5c5457cc2 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -3081,11 +3081,11 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
ccb->opcode = BLOGIC_INITIATOR_CCB_SG;
ccb->datalen = count * sizeof(struct blogic_sg_seg);
if (blogic_multimaster_type(adapter))
- ccb->data = (void *)((unsigned int) ccb->dma_handle +
+ ccb->data = (unsigned int) ccb->dma_handle +
((unsigned long) &ccb->sglist -
- (unsigned long) ccb));
+ (unsigned long) ccb);
else
- ccb->data = ccb->sglist;
+ ccb->data = virt_to_32bit_virt(ccb->sglist);
scsi_for_each_sg(command, sg, count, i) {
ccb->sglist[i].segbytes = sg_dma_len(sg);
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index 8d47e2c88d24..1a33a4b28d45 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -821,7 +821,7 @@ struct blogic_ccb {
unsigned char cdblen; /* Byte 2 */
unsigned char sense_datalen; /* Byte 3 */
u32 datalen; /* Bytes 4-7 */
- void *data; /* Bytes 8-11 */
+ u32 data; /* Bytes 8-11 */
unsigned char:8; /* Byte 12 */
unsigned char:8; /* Byte 13 */
enum blogic_adapter_status adapter_status; /* Byte 14 */
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 088/116] openrisc: Define memory barrier mb
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 087/116] scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 089/116] btrfs: do not BUG_ON in link_to_fixup_dir Greg Kroah-Hartman
` (31 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Zijlstra, Stafford Horne, Sasha Levin
From: Peter Zijlstra <peterz@infradead.org>
[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]
This came up in the discussion of the requirements of qspinlock on an
architecture. OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.
Peter defined it in the mail thread writing:
As near as I can tell this should do. The arch spec only lists
this one instruction and the text makes it sound like a completion
barrier.
This is correct so applying this patch.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/openrisc/include/asm/barrier.h | 9 +++++++++
1 file changed, 9 insertions(+)
create mode 100644 arch/openrisc/include/asm/barrier.h
diff --git a/arch/openrisc/include/asm/barrier.h b/arch/openrisc/include/asm/barrier.h
new file mode 100644
index 000000000000..7538294721be
--- /dev/null
+++ b/arch/openrisc/include/asm/barrier.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#define mb() asm volatile ("l.msync" ::: "memory")
+
+#include <asm-generic/barrier.h>
+
+#endif /* __ASM_BARRIER_H */
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 089/116] btrfs: do not BUG_ON in link_to_fixup_dir
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 088/116] openrisc: Define memory barrier mb Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 090/116] platform/x86: hp-wireless: add AMDs hardware id to the supported list Greg Kroah-Hartman
` (30 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Josef Bacik, David Sterba, Sasha Levin
From: Josef Bacik <josef@toxicpanda.com>
[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]
While doing error injection testing I got the following panic
kernel BUG at fs/btrfs/tree-log.c:1862!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:link_to_fixup_dir+0xd5/0xe0
RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001
R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800
R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065
FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0
Call Trace:
replay_one_buffer+0x409/0x470
? btree_read_extent_buffer_pages+0xd0/0x110
walk_up_log_tree+0x157/0x1e0
walk_log_tree+0xa6/0x1d0
btrfs_recover_log_trees+0x1da/0x360
? replay_one_extent+0x7b0/0x7b0
open_ctree+0x1486/0x1720
btrfs_mount_root.cold+0x12/0xea
? __kmalloc_track_caller+0x12f/0x240
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
vfs_kern_mount.part.0+0x71/0xb0
btrfs_mount+0x10d/0x380
? vfs_parse_fs_string+0x4d/0x90
legacy_get_tree+0x24/0x40
vfs_get_tree+0x22/0xb0
path_mount+0x433/0xa10
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
We can get -EIO or any number of legitimate errors from
btrfs_search_slot(), panicing here is not the appropriate response. The
error path for this code handles errors properly, simply return the
error.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/btrfs/tree-log.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 7b940264c7b9..1cd610ddbb24 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1770,8 +1770,6 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans,
ret = btrfs_update_inode(trans, root, inode);
} else if (ret == -EEXIST) {
ret = 0;
- } else {
- BUG(); /* Logic Error */
}
iput(inode);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 090/116] platform/x86: hp-wireless: add AMDs hardware id to the supported list
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 089/116] btrfs: do not BUG_ON in link_to_fixup_dir Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 091/116] platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI Greg Kroah-Hartman
` (29 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shyam Sundar S K, Hans de Goede, Sasha Levin
From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[ Upstream commit f048630bdd55eb5379ef35f971639fe52fabe499 ]
Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/hp-wireless.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/hp-wireless.c b/drivers/platform/x86/hp-wireless.c
index d6ea5e998fb8..bb95bec0b110 100644
--- a/drivers/platform/x86/hp-wireless.c
+++ b/drivers/platform/x86/hp-wireless.c
@@ -30,12 +30,14 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alex Hung");
MODULE_ALIAS("acpi*:HPQ6001:*");
MODULE_ALIAS("acpi*:WSTADEF:*");
+MODULE_ALIAS("acpi*:AMDI0051:*");
static struct input_dev *hpwl_input_dev;
static const struct acpi_device_id hpwl_ids[] = {
{"HPQ6001", 0},
{"WSTADEF", 0},
+ {"AMDI0051", 0},
{"", 0},
};
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 091/116] platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (89 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 090/116] platform/x86: hp-wireless: add AMDs hardware id to the supported list Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 092/116] SMB3: incorrect file id in requests compounded with open Greg Kroah-Hartman
` (28 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Hans de Goede, Sasha Levin
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]
The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.
Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/intel_punit_ipc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c
index 2efeab650345..d6a7039a0591 100644
--- a/drivers/platform/x86/intel_punit_ipc.c
+++ b/drivers/platform/x86/intel_punit_ipc.c
@@ -331,6 +331,7 @@ static const struct acpi_device_id punit_ipc_acpi_ids[] = {
{ "INT34D4", 0 },
{ }
};
+MODULE_DEVICE_TABLE(acpi, punit_ipc_acpi_ids);
static struct platform_driver intel_punit_ipc_driver = {
.probe = intel_punit_ipc_probe,
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 092/116] SMB3: incorrect file id in requests compounded with open
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (90 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 091/116] platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 093/116] drm/amd/display: Disconnect non-DP with no EDID Greg Kroah-Hartman
` (27 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Steve French, Stefan Metzmacher,
Shyam Prasad N, Sasha Levin
From: Steve French <stfrench@microsoft.com>
[ Upstream commit c0d46717b95735b0eacfddbcca9df37a49de9c7a ]
See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2pdu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 07d1c79a79ea..43478ec6fd67 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -3124,10 +3124,10 @@ smb2_new_read_req(void **buf, unsigned int *total_len,
* Related requests use info from previous read request
* in chain.
*/
- shdr->SessionId = 0xFFFFFFFF;
+ shdr->SessionId = 0xFFFFFFFFFFFFFFFF;
shdr->TreeId = 0xFFFFFFFF;
- req->PersistentFileId = 0xFFFFFFFF;
- req->VolatileFileId = 0xFFFFFFFF;
+ req->PersistentFileId = 0xFFFFFFFFFFFFFFFF;
+ req->VolatileFileId = 0xFFFFFFFFFFFFFFFF;
}
}
if (remaining_bytes > io_parms->length)
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 093/116] drm/amd/display: Disconnect non-DP with no EDID
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (91 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 092/116] SMB3: incorrect file id in requests compounded with open Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 094/116] drm/amd/amdgpu: fix refcount leak Greg Kroah-Hartman
` (26 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Park, Nicholas Kazlauskas,
Stylon Wang, Daniel Wheeler, Alex Deucher, Sasha Levin
From: Chris Park <Chris.Park@amd.com>
[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ]
[Why]
Active DP dongles return no EDID when dongle
is connected, but VGA display is taken out.
Current driver behavior does not remove the
active display when this happens, and this is
a gap between dongle DTP and dongle behavior.
[How]
For active DP dongles and non-DP scenario,
disconnect sink on detection when no EDID
is read due to timeout.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index e3bedf4cc9c0..c9c81090d580 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -768,6 +768,24 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason)
dc_is_dvi_signal(link->connector_signal)) {
if (prev_sink != NULL)
dc_sink_release(prev_sink);
+ link_disconnect_sink(link);
+
+ return false;
+ }
+ /*
+ * Abort detection for DP connectors if we have
+ * no EDID and connector is active converter
+ * as there are no display downstream
+ *
+ */
+ if (dc_is_dp_sst_signal(link->connector_signal) &&
+ (link->dpcd_caps.dongle_type ==
+ DISPLAY_DONGLE_DP_VGA_CONVERTER ||
+ link->dpcd_caps.dongle_type ==
+ DISPLAY_DONGLE_DP_DVI_CONVERTER)) {
+ if (prev_sink)
+ dc_sink_release(prev_sink);
+ link_disconnect_sink(link);
return false;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 094/116] drm/amd/amdgpu: fix refcount leak
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (92 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 093/116] drm/amd/display: Disconnect non-DP with no EDID Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 095/116] drm/amdgpu: Fix a use-after-free Greg Kroah-Hartman
` (25 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jingwen Chen, Christian König,
Alex Deucher, Sasha Levin
From: Jingwen Chen <Jingwen.Chen2@amd.com>
[ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]
[Why]
the gem object rfb->base.obj[0] is get according to num_planes
in amdgpufb_create, but is not put according to num_planes
[How]
put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
index 69c5d22f29bd..d55ff59584c8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
@@ -297,10 +297,13 @@ out:
static int amdgpu_fbdev_destroy(struct drm_device *dev, struct amdgpu_fbdev *rfbdev)
{
struct amdgpu_framebuffer *rfb = &rfbdev->rfb;
+ int i;
drm_fb_helper_unregister_fbi(&rfbdev->helper);
if (rfb->base.obj[0]) {
+ for (i = 0; i < rfb->base.format->num_planes; i++)
+ drm_gem_object_put(rfb->base.obj[0]);
amdgpufb_destroy_pinned_object(rfb->base.obj[0]);
rfb->base.obj[0] = NULL;
drm_framebuffer_unregister_private(&rfb->base);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 095/116] drm/amdgpu: Fix a use-after-free
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (93 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 094/116] drm/amd/amdgpu: fix refcount leak Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 096/116] net: netcp: Fix an error message Greg Kroah-Hartman
` (24 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, xinhui pan, Christian König,
Alex Deucher, Sasha Levin
From: xinhui pan <xinhui.pan@amd.com>
[ Upstream commit 1e5c37385097c35911b0f8a0c67ffd10ee1af9a2 ]
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu]
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 757fa486aac4..50807d621eca 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1277,6 +1277,7 @@ static void amdgpu_ttm_tt_unpopulate(struct ttm_tt *ttm)
if (gtt && gtt->userptr) {
amdgpu_ttm_tt_set_user_pages(ttm, NULL);
kfree(ttm->sg);
+ ttm->sg = NULL;
ttm->page_flags &= ~TTM_PAGE_FLAG_SG;
return;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 096/116] net: netcp: Fix an error message
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (94 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 095/116] drm/amdgpu: Fix a use-after-free Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 18:44 ` Marion & Christophe JAILLET
2021-05-31 13:14 ` [PATCH 4.19 097/116] net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count Greg Kroah-Hartman
` (23 subsequent siblings)
119 siblings, 1 reply; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, David S. Miller,
Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]
'ret' is known to be 0 here.
The expected error code is stored in 'tx_pipe->dma_queue', so use it
instead.
While at it, switch from %d to %pe which is more user friendly.
Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/netcp_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index a1d335a3c5e4..60d411bbbdc6 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1364,8 +1364,8 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
tx_pipe->dma_queue = knav_queue_open(name, tx_pipe->dma_queue_id,
KNAV_QUEUE_SHARED);
if (IS_ERR(tx_pipe->dma_queue)) {
- dev_err(dev, "Could not open DMA queue for channel \"%s\": %d\n",
- name, ret);
+ dev_err(dev, "Could not open DMA queue for channel \"%s\": %pe\n",
+ name, tx_pipe->dma_queue);
ret = PTR_ERR(tx_pipe->dma_queue);
goto err;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* Re: [PATCH 4.19 096/116] net: netcp: Fix an error message
2021-05-31 13:14 ` [PATCH 4.19 096/116] net: netcp: Fix an error message Greg Kroah-Hartman
@ 2021-05-31 18:44 ` Marion & Christophe JAILLET
0 siblings, 0 replies; 122+ messages in thread
From: Marion & Christophe JAILLET @ 2021-05-31 18:44 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, David S. Miller, Sasha Levin, Dan Carpenter
Le 31/05/2021 à 15:14, Greg Kroah-Hartman a écrit :
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>
> [ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]
>
> 'ret' is known to be 0 here.
> The expected error code is stored in 'tx_pipe->dma_queue', so use it
> instead.
>
> While at it, switch from %d to %pe which is more user friendly.
>
> Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/net/ethernet/ti/netcp_core.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
> index a1d335a3c5e4..60d411bbbdc6 100644
> --- a/drivers/net/ethernet/ti/netcp_core.c
> +++ b/drivers/net/ethernet/ti/netcp_core.c
> @@ -1364,8 +1364,8 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
> tx_pipe->dma_queue = knav_queue_open(name, tx_pipe->dma_queue_id,
> KNAV_QUEUE_SHARED);
> if (IS_ERR(tx_pipe->dma_queue)) {
> - dev_err(dev, "Could not open DMA queue for channel \"%s\": %d\n",
> - name, ret);
> + dev_err(dev, "Could not open DMA queue for channel \"%s\": %pe\n",
> + name, tx_pipe->dma_queue);
> ret = PTR_ERR(tx_pipe->dma_queue);
> goto err;
> }
Hi,
Apparently %pe is only supported up to (including) 5.5. It is not part
of 5.4.123.
So this patch should not be backported here or should be backported
differently, ie:
leave dev_err as-is
move "ret = PTR_ERR(tx_pipe->dma_queue);" 1 line above
(or %pe should be backported first)
PS: adding Dan Carpenter because we had a small discussion about some
potential backport issue when, using %pe
CJ
^ permalink raw reply [flat|nested] 122+ messages in thread
* [PATCH 4.19 097/116] net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (95 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 096/116] net: netcp: Fix an error message Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 098/116] net: fec: fix the potential memory leak in fec_enet_init() Greg Kroah-Hartman
` (22 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladimir Oltean, Florian Fainelli,
Andrew Lunn, David S. Miller, Sasha Levin
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit b94cbc909f1d80378a1f541968309e5c1178c98b ]
DSA implements a bunch of 'standardized' ethtool statistics counters,
namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the
hardware driver returns in .get_sset_count(), we need to add 4 to that.
That is ok, except that .get_sset_count() can return a negative error
code, for example:
b53_get_sset_count
-> phy_ethtool_get_sset_count
-> return -EIO
-EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can
imagine that certain error codes may even become positive, although
based on code inspection I did not see instances of that.
Check the error code first, if it is negative return it as-is.
Based on a similar patch for dsa_master_get_strings from Dan Carpenter:
https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/dsa/slave.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 11f1560de639..b887d9edb9c3 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -598,13 +598,15 @@ static int dsa_slave_get_sset_count(struct net_device *dev, int sset)
struct dsa_switch *ds = dp->ds;
if (sset == ETH_SS_STATS) {
- int count;
+ int count = 0;
- count = 4;
- if (ds->ops->get_sset_count)
- count += ds->ops->get_sset_count(ds, dp->index, sset);
+ if (ds->ops->get_sset_count) {
+ count = ds->ops->get_sset_count(ds, dp->index, sset);
+ if (count < 0)
+ return count;
+ }
- return count;
+ return count + 4;
}
return -EOPNOTSUPP;
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 098/116] net: fec: fix the potential memory leak in fec_enet_init()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (96 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 097/116] net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 099/116] net: mdio: thunder: Fix a double free issue in the .remove function Greg Kroah-Hartman
` (21 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fugang Duan, Joakim Zhang,
David S. Miller, Sasha Levin
From: Fugang Duan <fugang.duan@nxp.com>
[ Upstream commit 619fee9eb13b5d29e4267cb394645608088c28a8 ]
If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.
And if the memory allocated for the queues is failed, it can
return error directly.
Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/fec_main.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 7d1a669416f2..6b9eada1feb2 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3221,7 +3221,9 @@ static int fec_enet_init(struct net_device *ndev)
return ret;
}
- fec_enet_alloc_queue(ndev);
+ ret = fec_enet_alloc_queue(ndev);
+ if (ret)
+ return ret;
bd_size = (fep->total_tx_ring_size + fep->total_rx_ring_size) * dsize;
@@ -3229,7 +3231,8 @@ static int fec_enet_init(struct net_device *ndev)
cbd_base = dmam_alloc_coherent(&fep->pdev->dev, bd_size, &bd_dma,
GFP_KERNEL);
if (!cbd_base) {
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto free_queue_mem;
}
memset(cbd_base, 0, bd_size);
@@ -3309,6 +3312,10 @@ static int fec_enet_init(struct net_device *ndev)
fec_enet_update_ethtool_stats(ndev);
return 0;
+
+free_queue_mem:
+ fec_enet_free_queue(ndev);
+ return ret;
}
#ifdef CONFIG_OF
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 099/116] net: mdio: thunder: Fix a double free issue in the .remove function
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (97 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 098/116] net: fec: fix the potential memory leak in fec_enet_init() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 100/116] net: mdio: octeon: Fix some double free issues Greg Kroah-Hartman
` (20 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Russell King,
Andrew Lunn, David S. Miller, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit a93a0a15876d2a077a3bc260b387d2457a051f24 ]
'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the remove function.
Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/mdio-thunder.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/phy/mdio-thunder.c b/drivers/net/phy/mdio-thunder.c
index 564616968cad..c0c922eff760 100644
--- a/drivers/net/phy/mdio-thunder.c
+++ b/drivers/net/phy/mdio-thunder.c
@@ -129,7 +129,6 @@ static void thunder_mdiobus_pci_remove(struct pci_dev *pdev)
continue;
mdiobus_unregister(bus->mii_bus);
- mdiobus_free(bus->mii_bus);
oct_mdio_writeq(0, bus->register_base + SMI_EN);
}
pci_set_drvdata(pdev, NULL);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 100/116] net: mdio: octeon: Fix some double free issues
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (98 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 099/116] net: mdio: thunder: Fix a double free issue in the .remove function Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 101/116] openvswitch: meter: fix race when getting now_ms Greg Kroah-Hartman
` (19 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andrew Lunn, Christophe JAILLET,
Russell King, David S. Miller, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit e1d027dd97e1e750669cdc0d3b016a4f54e473eb ]
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.
Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.
Suggested-By: Andrew Lunn <andrew@lunn.ch>
Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/mdio-octeon.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index ab6914f8bd50..1da104150f44 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -75,7 +75,6 @@ static int octeon_mdiobus_probe(struct platform_device *pdev)
return 0;
fail_register:
- mdiobus_free(bus->mii_bus);
smi_en.u64 = 0;
oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
return err;
@@ -89,7 +88,6 @@ static int octeon_mdiobus_remove(struct platform_device *pdev)
bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus->mii_bus);
- mdiobus_free(bus->mii_bus);
smi_en.u64 = 0;
oct_mdio_writeq(smi_en.u64, bus->register_base + SMI_EN);
return 0;
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 101/116] openvswitch: meter: fix race when getting now_ms.
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (99 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 100/116] net: mdio: octeon: Fix some double free issues Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 102/116] net: bnx2: Fix error return code in bnx2_init_board() Greg Kroah-Hartman
` (18 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tao Liu, Ilya Maximets,
David S. Miller, Sasha Levin
From: Tao Liu <thomas.liu@ucloud.cn>
[ Upstream commit e4df1b0c24350a0f00229ff895a91f1072bd850d ]
We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.
now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
delta_ms = (u32)long_delta_ms;
which will be a large value.
band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.
OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.
[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/
Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/openvswitch/meter.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c
index 5ea2471ffc03..9b0c54f0702c 100644
--- a/net/openvswitch/meter.c
+++ b/net/openvswitch/meter.c
@@ -464,6 +464,14 @@ bool ovs_meter_execute(struct datapath *dp, struct sk_buff *skb,
spin_lock(&meter->lock);
long_delta_ms = (now_ms - meter->used); /* ms */
+ if (long_delta_ms < 0) {
+ /* This condition means that we have several threads fighting
+ * for a meter lock, and the one who received the packets a
+ * bit later wins. Assuming that all racing threads received
+ * packets at the same time to avoid overflow.
+ */
+ long_delta_ms = 0;
+ }
/* Make sure delta_ms will not be too large, so that bucket will not
* wrap around below.
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 102/116] net: bnx2: Fix error return code in bnx2_init_board()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (100 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 101/116] openvswitch: meter: fix race when getting now_ms Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 103/116] mld: fix panic in mld_newpack() Greg Kroah-Hartman
` (17 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Zhen Lei, Michael Chan,
David S. Miller, Sasha Levin
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ]
Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnx2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 122fdb80a789..9993f1162ac6 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8253,9 +8253,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
BNX2_WR(bp, PCI_COMMAND, reg);
} else if ((BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A1) &&
!(bp->flags & BNX2_FLAG_PCIX)) {
-
dev_err(&pdev->dev,
"5706 A1 can only be used in a PCIX bus, aborting\n");
+ rc = -EPERM;
goto err_out_unmap;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 103/116] mld: fix panic in mld_newpack()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (101 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 102/116] net: bnx2: Fix error return code in bnx2_init_board() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 104/116] staging: emxx_udc: fix loop in _nbu2ss_nuke() Greg Kroah-Hartman
` (16 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 020ef930b826d21c5446fdc9db80fd72a791bc21 ]
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip netns exec B ip link set veth1 up
ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
for i in {1..99}
do
let A=$i-1
ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
ip netns exec A ip link set ip6gre$i up
ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
ip netns exec B ip link set ip6gre$i up
done
Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS: 0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
skb_put.cold.104+0x22/0x22
ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? rcu_read_lock_sched_held+0x91/0xc0
mld_newpack+0x398/0x8f0
? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
? lock_contended+0xc40/0xc40
add_grhead.isra.33+0x280/0x380
add_grec+0x5ca/0xff0
? mld_sendpack+0xf40/0xf40
? lock_downgrade+0x690/0x690
mld_send_initial_cr.part.34+0xb9/0x180
ipv6_mc_dad_complete+0x15d/0x1b0
addrconf_dad_completed+0x8d2/0xbb0
? lock_downgrade+0x690/0x690
? addrconf_rs_timer+0x660/0x660
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
Allowing high order page allocation could fix this problem.
Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/mcast.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index f2f8551416c3..3d048401141f 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1606,10 +1606,7 @@ static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu)
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- /* limit our allocations to order-0 page */
- size = min_t(int, size, SKB_MAX_ORDER(0, 0));
skb = sock_alloc_send_skb(sk, size, 1, &err);
-
if (!skb)
return NULL;
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 104/116] staging: emxx_udc: fix loop in _nbu2ss_nuke()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (102 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 103/116] mld: fix panic in mld_newpack() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 105/116] ASoC: cs35l33: fix an error code in probe() Greg Kroah-Hartman
` (15 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit e0112a7c9e847ada15a631b88e279d547e8f26a7 ]
The _nbu2ss_ep_done() function calls:
list_del_init(&req->queue);
which means that the loop will never exit.
Fixes: ca3d253eb967 ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/emxx_udc/emxx_udc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 3e51476a7045..d2cb2bd6d913 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -2148,7 +2148,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
struct nbu2ss_ep *ep,
int status)
{
- struct nbu2ss_req *req;
+ struct nbu2ss_req *req, *n;
/* Endpoint Disable */
_nbu2ss_epn_exit(udc, ep);
@@ -2160,7 +2160,7 @@ static int _nbu2ss_nuke(struct nbu2ss_udc *udc,
return 0;
/* called with irqs blocked */
- list_for_each_entry(req, &ep->queue, queue) {
+ list_for_each_entry_safe(req, n, &ep->queue, queue) {
_nbu2ss_ep_done(ep, req, status);
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 105/116] ASoC: cs35l33: fix an error code in probe()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (103 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 104/116] staging: emxx_udc: fix loop in _nbu2ss_nuke() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 106/116] bpf: Set mac_len in bpf_skb_change_head Greg Kroah-Hartman
` (14 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Charles Keepax,
Mark Brown, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ]
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/cs35l33.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/cs35l33.c b/sound/soc/codecs/cs35l33.c
index 668cd3754209..73fa784646e5 100644
--- a/sound/soc/codecs/cs35l33.c
+++ b/sound/soc/codecs/cs35l33.c
@@ -1204,6 +1204,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client,
dev_err(&i2c_client->dev,
"CS35L33 Device ID (%X). Expected ID %X\n",
devid, CS35L33_CHIP_ID);
+ ret = -EINVAL;
goto err_enable;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 106/116] bpf: Set mac_len in bpf_skb_change_head
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (104 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 105/116] ASoC: cs35l33: fix an error code in probe() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 107/116] ixgbe: fix large MTU request from VF Greg Kroah-Hartman
` (13 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jussi Maki, Daniel Borkmann, Sasha Levin
From: Jussi Maki <joamaki@gmail.com>
[ Upstream commit 84316ca4e100d8cbfccd9f774e23817cb2059868 ]
The skb_change_head() helper did not set "skb->mac_len", which is
problematic when it's used in combination with skb_redirect_peer().
Without it, redirecting a packet from a L3 device such as wireguard to
the veth peer device will cause skb->data to point to the middle of the
IP header on entry to tcp_v4_rcv() since the L2 header is not pulled
correctly due to mac_len=0.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210519154743.2554771-2-joamaki@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/filter.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/filter.c b/net/core/filter.c
index 6272570fe139..01561268d216 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -3020,6 +3020,7 @@ static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
__skb_push(skb, head_room);
memset(skb->data, 0, head_room);
skb_reset_mac_header(skb);
+ skb_reset_mac_len(skb);
}
return ret;
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 107/116] ixgbe: fix large MTU request from VF
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (105 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 106/116] bpf: Set mac_len in bpf_skb_change_head Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 108/116] scsi: libsas: Use _safe() loop in sas_resume_port() Greg Kroah-Hartman
` (12 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Piotr Skajewski, Jesse Brandeburg,
Mateusz Palczewski, Konrad Jankowski, Tony Nguyen,
David S. Miller, Sasha Levin
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
[ Upstream commit 63e39d29b3da02e901349f6cd71159818a4737a6 ]
Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.
Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index f6ffd9fb2079..8aaf856771d7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -467,12 +467,16 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
return err;
}
-static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
+static int ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 max_frame, u32 vf)
{
struct ixgbe_hw *hw = &adapter->hw;
- int max_frame = msgbuf[1];
u32 max_frs;
+ if (max_frame < ETH_MIN_MTU || max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
+ e_err(drv, "VF max_frame %d out of range\n", max_frame);
+ return -EINVAL;
+ }
+
/*
* For 82599EB we have to keep all PFs and VFs operating with
* the same max_frame value in order to avoid sending an oversize
@@ -532,12 +536,6 @@ static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
}
}
- /* MTU < 68 is an error and causes problems on some kernels */
- if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
- e_err(drv, "VF max_frame %d out of range\n", max_frame);
- return -EINVAL;
- }
-
/* pull current max frame size from hardware */
max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
max_frs &= IXGBE_MHADD_MFS_MASK;
@@ -1240,7 +1238,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
break;
case IXGBE_VF_SET_LPE:
- retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
+ retval = ixgbe_set_vf_lpe(adapter, msgbuf[1], vf);
break;
case IXGBE_VF_SET_MACVLAN:
retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 108/116] scsi: libsas: Use _safe() loop in sas_resume_port()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (106 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 107/116] ixgbe: fix large MTU request from VF Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 109/116] ipv6: record frag_max_size in atomic fragments in input path Greg Kroah-Hartman
` (11 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, John Garry, Dan Carpenter,
Martin K. Petersen, Sasha Levin
From: Dan Carpenter <dan.carpenter@oracle.com>
[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ]
If sas_notify_lldd_dev_found() fails then this code calls:
sas_unregister_dev(port, dev);
which removes "dev", our list iterator, from the list. This could lead to
an endless loop. We need to use list_for_each_entry_safe().
Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/libsas/sas_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index fad23dd39114..1a0b2ce398f7 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -41,7 +41,7 @@ static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy
static void sas_resume_port(struct asd_sas_phy *phy)
{
- struct domain_device *dev;
+ struct domain_device *dev, *n;
struct asd_sas_port *port = phy->port;
struct sas_ha_struct *sas_ha = phy->ha;
struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt);
@@ -60,7 +60,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
* 1/ presume every device came back
* 2/ force the next revalidation to check all expander phys
*/
- list_for_each_entry(dev, &port->dev_list, dev_list_node) {
+ list_for_each_entry_safe(dev, n, &port->dev_list, dev_list_node) {
int i, rc;
rc = sas_notify_lldd_dev_found(dev);
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 109/116] ipv6: record frag_max_size in atomic fragments in input path
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (107 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 108/116] scsi: libsas: Use _safe() loop in sas_resume_port() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 110/116] sch_dsmark: fix a NULL deref in qdisc_reset() Greg Kroah-Hartman
` (10 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Francesco Ruggeri, David S. Miller,
Sasha Levin
From: Francesco Ruggeri <fruggeri@arista.com>
[ Upstream commit e29f011e8fc04b2cdc742a2b9bbfa1b62518381a ]
Commit dbd1759e6a9c ("ipv6: on reassembly, record frag_max_size")
filled the frag_max_size field in IP6CB in the input path.
The field should also be filled in case of atomic fragments.
Fixes: dbd1759e6a9c ('ipv6: on reassembly, record frag_max_size')
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/reassembly.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index c6132e39ab16..60dfd0d11851 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -347,7 +347,7 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
hdr = ipv6_hdr(skb);
fhdr = (struct frag_hdr *)skb_transport_header(skb);
- if (!(fhdr->frag_off & htons(0xFFF9))) {
+ if (!(fhdr->frag_off & htons(IP6_OFFSET | IP6_MF))) {
/* It is not a fragmented frame */
skb->transport_header += sizeof(struct frag_hdr);
__IP6_INC_STATS(net,
@@ -355,6 +355,8 @@ static int ipv6_frag_rcv(struct sk_buff *skb)
IP6CB(skb)->nhoff = (u8 *)fhdr - skb_network_header(skb);
IP6CB(skb)->flags |= IP6SKB_FRAGMENTED;
+ IP6CB(skb)->frag_max_size = ntohs(hdr->payload_len) +
+ sizeof(struct ipv6hdr);
return 1;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 110/116] sch_dsmark: fix a NULL deref in qdisc_reset()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (108 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 109/116] ipv6: record frag_max_size in atomic fragments in input path Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 111/116] MIPS: alchemy: xxs1500: add gpio-au1000.h header file Greg Kroah-Hartman
` (9 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Taehee Yoo, David S. Miller, Sasha Levin
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 9b76eade16423ef06829cccfe3e100cfce31afcd ]
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.
Test commands:
sysctl net.core.default_qdisc=dsmark -w
ip link add dummy0 type dummy
ip link add vw0 link dummy0 type virt_wifi
ip link set vw0 up
Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS: 00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? rcu_read_lock_bh_held+0xa0/0xa0
dsmark_reset+0x3d/0xf0 [sch_dsmark]
qdisc_reset+0xa9/0x680
qdisc_destroy+0x84/0x370
qdisc_create_dflt+0x1fe/0x380
attach_one_default_qdisc.constprop.41+0xa4/0x180
dev_activate+0x4d5/0x8c0
? __dev_open+0x268/0x390
__dev_open+0x270/0x390
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sched/sch_dsmark.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 1c2fce8c45b2..fe030af9272c 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -402,7 +402,8 @@ static void dsmark_reset(struct Qdisc *sch)
struct dsmark_qdisc_data *p = qdisc_priv(sch);
pr_debug("%s(sch %p,[qdisc %p])\n", __func__, sch, p);
- qdisc_reset(p->q);
+ if (p->q)
+ qdisc_reset(p->q);
sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 111/116] MIPS: alchemy: xxs1500: add gpio-au1000.h header file
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (109 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 110/116] sch_dsmark: fix a NULL deref in qdisc_reset() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 112/116] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c Greg Kroah-Hartman
` (8 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Thomas Bogendoerfer,
linux-mips, Manuel Lauss, Ralf Baechle, Manuel Lauss,
Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]
board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.
../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
56 | alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
57 | alchemy_gpio2_enable();
Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/alchemy/board-xxs1500.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index 5f05b8714385..b968cff5baa7 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -31,6 +31,7 @@
#include <asm/reboot.h>
#include <asm/setup.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
#include <prom.h>
const char *get_system_type(void)
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 112/116] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (110 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 111/116] MIPS: alchemy: xxs1500: add gpio-au1000.h header file Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 113/116] hugetlbfs: hugetlb_fault_mutex_hash() cleanup Greg Kroah-Hartman
` (7 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Guenter Roeck,
Wim Van Sebroeck, John Crispin, linux-mips, linux-watchdog,
Thomas Bogendoerfer, Sasha Levin
From: Randy Dunlap <rdunlap@infradead.org>
[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]
rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.
ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!
Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/mips/ralink/of.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 1ada8492733b..92b3d4849996 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/export.h>
#include <linux/init.h>
#include <linux/sizes.h>
#include <linux/of_fdt.h>
@@ -27,6 +28,7 @@
__iomem void *rt_sysc_membase;
__iomem void *rt_memc_membase;
+EXPORT_SYMBOL_GPL(rt_sysc_membase);
__iomem void *plat_of_remap_node(const char *node)
{
--
2.30.2
^ permalink raw reply related [flat|nested] 122+ messages in thread* [PATCH 4.19 113/116] hugetlbfs: hugetlb_fault_mutex_hash() cleanup
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (111 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 112/116] MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 114/116] drivers/net/ethernet: clean up unused assignments Greg Kroah-Hartman
` (6 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Kravetz, Nathan Chancellor,
Davidlohr Bueso, Andrew Morton, Nick Desaulniers, Ilie Halip,
David Bolvansky, Linus Torvalds
From: Mike Kravetz <mike.kravetz@oracle.com>
commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream.
A new clang diagnostic (-Wsizeof-array-div) warns about the calculation
to determine the number of u32's in an array of unsigned longs.
Suppress warning by adding parentheses.
While looking at the above issue, noticed that the 'address' parameter
to hugetlb_fault_mutex_hash is no longer used. So, remove it from the
definition and all callers.
No functional change.
Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: David Bolvansky <david.bolvansky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hugetlbfs/inode.c | 4 ++--
include/linux/hugetlb.h | 2 +-
mm/hugetlb.c | 10 +++++-----
mm/userfaultfd.c | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -426,7 +426,7 @@ static void remove_inode_hugepages(struc
u32 hash;
index = page->index;
- hash = hugetlb_fault_mutex_hash(h, mapping, index, 0);
+ hash = hugetlb_fault_mutex_hash(h, mapping, index);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
/*
@@ -623,7 +623,7 @@ static long hugetlbfs_fallocate(struct f
addr = index * hpage_size;
/* mutex taken here, fault path and hole punch */
- hash = hugetlb_fault_mutex_hash(h, mapping, index, addr);
+ hash = hugetlb_fault_mutex_hash(h, mapping, index);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
/* See if already present in mapping to avoid alloc/free */
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -124,7 +124,7 @@ void free_huge_page(struct page *page);
void hugetlb_fix_reserve_counts(struct inode *inode);
extern struct mutex *hugetlb_fault_mutex_table;
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address);
+ pgoff_t idx);
pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud);
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3862,7 +3862,7 @@ retry:
* handling userfault. Reacquire after handling
* fault to make calling code simpler.
*/
- hash = hugetlb_fault_mutex_hash(h, mapping, idx, haddr);
+ hash = hugetlb_fault_mutex_hash(h, mapping, idx);
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
ret = handle_userfault(&vmf, VM_UFFD_MISSING);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
@@ -3971,7 +3971,7 @@ backout_unlocked:
#ifdef CONFIG_SMP
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address)
+ pgoff_t idx)
{
unsigned long key[2];
u32 hash;
@@ -3979,7 +3979,7 @@ u32 hugetlb_fault_mutex_hash(struct hsta
key[0] = (unsigned long) mapping;
key[1] = idx;
- hash = jhash2((u32 *)&key, sizeof(key)/sizeof(u32), 0);
+ hash = jhash2((u32 *)&key, sizeof(key)/(sizeof(u32)), 0);
return hash & (num_fault_mutexes - 1);
}
@@ -3989,7 +3989,7 @@ u32 hugetlb_fault_mutex_hash(struct hsta
* return 0 and avoid the hashing overhead.
*/
u32 hugetlb_fault_mutex_hash(struct hstate *h, struct address_space *mapping,
- pgoff_t idx, unsigned long address)
+ pgoff_t idx)
{
return 0;
}
@@ -4033,7 +4033,7 @@ vm_fault_t hugetlb_fault(struct mm_struc
* get spurious allocation failures if two CPUs race to instantiate
* the same page in the page cache.
*/
- hash = hugetlb_fault_mutex_hash(h, mapping, idx, haddr);
+ hash = hugetlb_fault_mutex_hash(h, mapping, idx);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
entry = huge_ptep_get(ptep);
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -271,7 +271,7 @@ retry:
*/
idx = linear_page_index(dst_vma, dst_addr);
mapping = dst_vma->vm_file->f_mapping;
- hash = hugetlb_fault_mutex_hash(h, mapping, idx, dst_addr);
+ hash = hugetlb_fault_mutex_hash(h, mapping, idx);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
err = -ENOMEM;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 114/116] drivers/net/ethernet: clean up unused assignments
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (112 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 113/116] hugetlbfs: hugetlb_fault_mutex_hash() cleanup Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 115/116] net: hns3: check the return of skb_checksum_help() Greg Kroah-Hartman
` (5 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jesse Brandeburg, Edward Cree,
David S. Miller
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
commit 7c8c0291f84027558bd5fca5729cbcf288c510f4 upstream.
As part of the W=1 compliation series, these lines all created
warnings about unused variables that were assigned a value. Most
of them are from register reads, but some are just picking up
a return value from a function and never doing anything with it.
Fixed warnings:
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs '
.../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
.../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
.../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable]
.../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable]
.../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable]
.../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
The register reads should be OK, because the current
implementation of readl and friends will always execute even
without an lvalue.
When it makes sense, just remove the lvalue assignment and the
local. Other times, just remove the offending code, and
occasionally, just mark the variable as maybe unused since it
could be used in an ifdef or debug scenario.
Only compile tested with W=1.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[fixes gcc-11 build warnings - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/brocade/bna/bnad.c | 7 +---
drivers/net/ethernet/dec/tulip/de4x5.c | 4 +-
drivers/net/ethernet/dec/tulip/media.c | 5 ---
drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 -
drivers/net/ethernet/micrel/ksz884x.c | 3 --
drivers/net/ethernet/microchip/lan743x_main.c | 6 +---
drivers/net/ethernet/neterion/vxge/vxge-traffic.c | 32 +++++++---------------
drivers/net/ethernet/sfc/falcon/farch.c | 29 +++++++------------
drivers/net/ethernet/sis/sis900.c | 5 +--
drivers/net/ethernet/synopsys/dwc-xlgmac-common.c | 2 -
drivers/net/ethernet/ti/davinci_emac.c | 5 +--
drivers/net/ethernet/ti/tlan.c | 4 --
drivers/net/ethernet/via/via-velocity.c | 13 --------
13 files changed, 36 insertions(+), 81 deletions(-)
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -3290,7 +3290,7 @@ bnad_change_mtu(struct net_device *netde
{
int err, mtu;
struct bnad *bnad = netdev_priv(netdev);
- u32 rx_count = 0, frame, new_frame;
+ u32 frame, new_frame;
mutex_lock(&bnad->conf_mutex);
@@ -3306,12 +3306,9 @@ bnad_change_mtu(struct net_device *netde
/* only when transition is over 4K */
if ((frame <= 4096 && new_frame > 4096) ||
(frame > 4096 && new_frame <= 4096))
- rx_count = bnad_reinit_rx(bnad);
+ bnad_reinit_rx(bnad);
}
- /* rx_count > 0 - new rx created
- * - Linux set err = 0 and return
- */
err = bnad_mtu_set(bnad, new_frame);
if (err)
err = -EBUSY;
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -4927,11 +4927,11 @@ mii_get_oui(u_char phyaddr, u_long ioadd
u_char breg[2];
} a;
int i, r2, r3, ret=0;*/
- int r2, r3;
+ int r2;
/* Read r2 and r3 */
r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
- r3 = mii_rd(MII_ID1, phyaddr, ioaddr);
+ mii_rd(MII_ID1, phyaddr, ioaddr);
/* SEEQ and Cypress way * /
/ * Shuffle r2 and r3 * /
a.reg=0;
--- a/drivers/net/ethernet/dec/tulip/media.c
+++ b/drivers/net/ethernet/dec/tulip/media.c
@@ -319,13 +319,8 @@ void tulip_select_media(struct net_devic
break;
}
case 5: case 6: {
- u16 setup[5];
-
new_csr6 = 0; /* FIXME */
- for (i = 0; i < 5; i++)
- setup[i] = get_u16(&p[i*2 + 1]);
-
if (startup && mtable->has_reset) {
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -862,6 +862,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff
struct mlx4_en_tx_desc *tx_desc;
struct mlx4_wqe_data_seg *data;
struct mlx4_en_tx_info *tx_info;
+ u32 __maybe_unused ring_cons;
int tx_ind;
int nr_txbb;
int desc_size;
@@ -875,7 +876,6 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff
bool stop_queue;
bool inline_ok;
u8 data_offset;
- u32 ring_cons;
bool bf_ok;
tx_ind = skb_get_queue_mapping(skb);
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -1657,8 +1657,7 @@ static inline void set_tx_len(struct ksz
#define HW_DELAY(hw, reg) \
do { \
- u16 dummy; \
- dummy = readw(hw->io + reg); \
+ readw(hw->io + reg); \
} while (0)
/**
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -156,9 +156,8 @@ static void lan743x_tx_isr(void *context
struct lan743x_tx *tx = context;
struct lan743x_adapter *adapter = tx->adapter;
bool enable_flag = true;
- u32 int_en = 0;
- int_en = lan743x_csr_read(adapter, INT_EN_SET);
+ lan743x_csr_read(adapter, INT_EN_SET);
if (flags & LAN743X_VECTOR_FLAG_SOURCE_ENABLE_CLEAR) {
lan743x_csr_write(adapter, INT_EN_CLR,
INT_BIT_DMA_TX_(tx->channel_number));
@@ -1635,10 +1634,9 @@ static int lan743x_tx_napi_poll(struct n
bool start_transmitter = false;
unsigned long irq_flags = 0;
u32 ioc_bit = 0;
- u32 int_sts = 0;
ioc_bit = DMAC_INT_BIT_TX_IOC_(tx->channel_number);
- int_sts = lan743x_csr_read(adapter, DMAC_INT_STS);
+ lan743x_csr_read(adapter, DMAC_INT_STS);
if (tx->vector_flags & LAN743X_VECTOR_FLAG_SOURCE_STATUS_W2C)
lan743x_csr_write(adapter, DMAC_INT_STS, ioc_bit);
spin_lock_irqsave(&tx->ring_lock, irq_flags);
--- a/drivers/net/ethernet/neterion/vxge/vxge-traffic.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c
@@ -29,8 +29,6 @@
*/
enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp)
{
- u64 val64;
-
struct __vxge_hw_virtualpath *vpath;
struct vxge_hw_vpath_reg __iomem *vp_reg;
enum vxge_hw_status status = VXGE_HW_OK;
@@ -83,7 +81,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_e
__vxge_hw_pio_mem_write32_upper((u32)VXGE_HW_INTR_MASK_ALL,
&vp_reg->xgmac_vp_int_status);
- val64 = readq(&vp_reg->vpath_general_int_status);
+ readq(&vp_reg->vpath_general_int_status);
/* Mask unwanted interrupts */
@@ -156,8 +154,6 @@ exit:
enum vxge_hw_status vxge_hw_vpath_intr_disable(
struct __vxge_hw_vpath_handle *vp)
{
- u64 val64;
-
struct __vxge_hw_virtualpath *vpath;
enum vxge_hw_status status = VXGE_HW_OK;
struct vxge_hw_vpath_reg __iomem *vp_reg;
@@ -178,8 +174,6 @@ enum vxge_hw_status vxge_hw_vpath_intr_d
(u32)VXGE_HW_INTR_MASK_ALL,
&vp_reg->vpath_general_int_mask);
- val64 = VXGE_HW_TIM_CLR_INT_EN_VP(1 << (16 - vpath->vp_id));
-
writeq(VXGE_HW_INTR_MASK_ALL, &vp_reg->kdfcctl_errors_mask);
__vxge_hw_pio_mem_write32_upper((u32)VXGE_HW_INTR_MASK_ALL,
@@ -486,9 +480,7 @@ void vxge_hw_device_unmask_all(struct __
*/
void vxge_hw_device_flush_io(struct __vxge_hw_device *hldev)
{
- u32 val32;
-
- val32 = readl(&hldev->common_reg->titan_general_int_status);
+ readl(&hldev->common_reg->titan_general_int_status);
}
/**
@@ -1726,8 +1718,8 @@ void vxge_hw_fifo_txdl_free(struct __vxg
enum vxge_hw_status
vxge_hw_vpath_mac_addr_add(
struct __vxge_hw_vpath_handle *vp,
- u8 (macaddr)[ETH_ALEN],
- u8 (macaddr_mask)[ETH_ALEN],
+ u8 *macaddr,
+ u8 *macaddr_mask,
enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode)
{
u32 i;
@@ -1789,8 +1781,8 @@ exit:
enum vxge_hw_status
vxge_hw_vpath_mac_addr_get(
struct __vxge_hw_vpath_handle *vp,
- u8 (macaddr)[ETH_ALEN],
- u8 (macaddr_mask)[ETH_ALEN])
+ u8 *macaddr,
+ u8 *macaddr_mask)
{
u32 i;
u64 data1 = 0ULL;
@@ -1841,8 +1833,8 @@ exit:
enum vxge_hw_status
vxge_hw_vpath_mac_addr_get_next(
struct __vxge_hw_vpath_handle *vp,
- u8 (macaddr)[ETH_ALEN],
- u8 (macaddr_mask)[ETH_ALEN])
+ u8 *macaddr,
+ u8 *macaddr_mask)
{
u32 i;
u64 data1 = 0ULL;
@@ -1894,8 +1886,8 @@ exit:
enum vxge_hw_status
vxge_hw_vpath_mac_addr_delete(
struct __vxge_hw_vpath_handle *vp,
- u8 (macaddr)[ETH_ALEN],
- u8 (macaddr_mask)[ETH_ALEN])
+ u8 *macaddr,
+ u8 *macaddr_mask)
{
u32 i;
u64 data1 = 0ULL;
@@ -2385,7 +2377,6 @@ enum vxge_hw_status vxge_hw_vpath_poll_r
u8 t_code;
enum vxge_hw_status status = VXGE_HW_OK;
void *first_rxdh;
- u64 val64 = 0;
int new_count = 0;
ring->cmpl_cnt = 0;
@@ -2413,8 +2404,7 @@ enum vxge_hw_status vxge_hw_vpath_poll_r
}
writeq(VXGE_HW_PRC_RXD_DOORBELL_NEW_QW_CNT(new_count),
&ring->vp_reg->prc_rxd_doorbell);
- val64 =
- readl(&ring->common_reg->titan_general_int_status);
+ readl(&ring->common_reg->titan_general_int_status);
ring->doorbell_cnt = 0;
}
}
--- a/drivers/net/ethernet/sfc/falcon/farch.c
+++ b/drivers/net/ethernet/sfc/falcon/farch.c
@@ -873,17 +873,12 @@ static u16 ef4_farch_handle_rx_not_ok(st
{
struct ef4_channel *channel = ef4_rx_queue_channel(rx_queue);
struct ef4_nic *efx = rx_queue->efx;
- bool rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err;
+ bool __maybe_unused rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err;
bool rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err;
bool rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc;
- bool rx_ev_other_err, rx_ev_pause_frm;
- bool rx_ev_hdr_type, rx_ev_mcast_pkt;
- unsigned rx_ev_pkt_type;
+ bool rx_ev_pause_frm;
- rx_ev_hdr_type = EF4_QWORD_FIELD(*event, FSF_AZ_RX_EV_HDR_TYPE);
- rx_ev_mcast_pkt = EF4_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_PKT);
rx_ev_tobe_disc = EF4_QWORD_FIELD(*event, FSF_AZ_RX_EV_TOBE_DISC);
- rx_ev_pkt_type = EF4_QWORD_FIELD(*event, FSF_AZ_RX_EV_PKT_TYPE);
rx_ev_buf_owner_id_err = EF4_QWORD_FIELD(*event,
FSF_AZ_RX_EV_BUF_OWNER_ID_ERR);
rx_ev_ip_hdr_chksum_err = EF4_QWORD_FIELD(*event,
@@ -896,10 +891,6 @@ static u16 ef4_farch_handle_rx_not_ok(st
0 : EF4_QWORD_FIELD(*event, FSF_AA_RX_EV_DRIB_NIB));
rx_ev_pause_frm = EF4_QWORD_FIELD(*event, FSF_AZ_RX_EV_PAUSE_FRM_ERR);
- /* Every error apart from tobe_disc and pause_frm */
- rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
- rx_ev_buf_owner_id_err | rx_ev_eth_crc_err |
- rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err);
/* Count errors that are not in MAC stats. Ignore expected
* checksum errors during self-test. */
@@ -919,6 +910,13 @@ static u16 ef4_farch_handle_rx_not_ok(st
* to a FIFO overflow.
*/
#ifdef DEBUG
+ {
+ /* Every error apart from tobe_disc and pause_frm */
+
+ bool rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
+ rx_ev_buf_owner_id_err | rx_ev_eth_crc_err |
+ rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err);
+
if (rx_ev_other_err && net_ratelimit()) {
netif_dbg(efx, rx_err, efx->net_dev,
" RX queue %d unexpected RX event "
@@ -935,6 +933,7 @@ static u16 ef4_farch_handle_rx_not_ok(st
rx_ev_tobe_disc ? " [TOBE_DISC]" : "",
rx_ev_pause_frm ? " [PAUSE]" : "");
}
+ }
#endif
/* The frame must be discarded if any of these are true. */
@@ -1646,15 +1645,11 @@ void ef4_farch_rx_push_indir_table(struc
*/
void ef4_farch_dimension_resources(struct ef4_nic *efx, unsigned sram_lim_qw)
{
- unsigned vi_count, buftbl_min;
+ unsigned vi_count;
/* Account for the buffer table entries backing the datapath channels
* and the descriptor caches for those channels.
*/
- buftbl_min = ((efx->n_rx_channels * EF4_MAX_DMAQ_SIZE +
- efx->n_tx_channels * EF4_TXQ_TYPES * EF4_MAX_DMAQ_SIZE +
- efx->n_channels * EF4_MAX_EVQ_SIZE)
- * sizeof(ef4_qword_t) / EF4_BUF_SIZE);
vi_count = max(efx->n_channels, efx->n_tx_channels * EF4_TXQ_TYPES);
efx->tx_dc_base = sram_lim_qw - vi_count * TX_DC_ENTRIES;
@@ -2535,7 +2530,6 @@ int ef4_farch_filter_remove_safe(struct
enum ef4_farch_filter_table_id table_id;
struct ef4_farch_filter_table *table;
unsigned int filter_idx;
- struct ef4_farch_filter_spec *spec;
int rc;
table_id = ef4_farch_filter_id_table_id(filter_id);
@@ -2546,7 +2540,6 @@ int ef4_farch_filter_remove_safe(struct
filter_idx = ef4_farch_filter_id_index(filter_id);
if (filter_idx >= table->size)
return -ENOENT;
- spec = &table->spec[filter_idx];
spin_lock_bh(&efx->filter_lock);
rc = ef4_farch_filter_remove(efx, table, filter_idx, priority);
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -783,10 +783,9 @@ static u16 sis900_default_phy(struct net
static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy)
{
u16 cap;
- u16 status;
- status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
- status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+ mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+ mdio_read(net_dev, phy->phy_addr, MII_STATUS);
cap = MII_NWAY_CSMA_CD |
((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) |
--- a/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
+++ b/drivers/net/ethernet/synopsys/dwc-xlgmac-common.c
@@ -513,7 +513,7 @@ void xlgmac_get_all_hw_features(struct x
void xlgmac_print_all_hw_features(struct xlgmac_pdata *pdata)
{
- char *str = NULL;
+ char __maybe_unused *str = NULL;
XLGMAC_PR("\n");
XLGMAC_PR("=====================================================\n");
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1240,7 +1240,7 @@ static int emac_poll(struct napi_struct
struct net_device *ndev = priv->ndev;
struct device *emac_dev = &ndev->dev;
u32 status = 0;
- u32 num_tx_pkts = 0, num_rx_pkts = 0;
+ u32 num_rx_pkts = 0;
/* Check interrupt vectors and call packet processing */
status = emac_read(EMAC_MACINVECTOR);
@@ -1251,8 +1251,7 @@ static int emac_poll(struct napi_struct
mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
if (status & mask) {
- num_tx_pkts = cpdma_chan_process(priv->txchan,
- EMAC_DEF_TX_MAX_SERVICE);
+ cpdma_chan_process(priv->txchan, EMAC_DEF_TX_MAX_SERVICE);
} /* TX processing */
mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
--- a/drivers/net/ethernet/ti/tlan.c
+++ b/drivers/net/ethernet/ti/tlan.c
@@ -671,7 +671,6 @@ module_exit(tlan_exit);
static void __init tlan_eisa_probe(void)
{
long ioaddr;
- int rc = -ENODEV;
int irq;
u16 device_id;
@@ -736,8 +735,7 @@ static void __init tlan_eisa_probe(void
/* Setup the newly found eisa adapter */
- rc = tlan_probe1(NULL, ioaddr, irq,
- 12, NULL);
+ tlan_probe1(NULL, ioaddr, irq, 12, NULL);
continue;
out:
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -875,26 +875,13 @@ static u32 check_connection_type(struct
*/
static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
{
- u32 curr_status;
struct mac_regs __iomem *regs = vptr->mac_regs;
vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
- curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
/* Set mii link status */
set_mii_flow_control(vptr);
- /*
- Check if new status is consistent with current status
- if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
- (mii_status==curr_status)) {
- vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
- vptr->mii_status=check_connection_type(vptr->mac_regs);
- VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
- return 0;
- }
- */
-
if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 115/116] net: hns3: check the return of skb_checksum_help()
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (113 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 114/116] drivers/net/ethernet: clean up unused assignments Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-05-31 13:14 ` [PATCH 4.19 116/116] usb: core: reduce power-on-good delay time of root hub Greg Kroah-Hartman
` (4 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yunsheng Lin, Huazhong Tan, David S. Miller
From: Yunsheng Lin <linyunsheng@huawei.com>
commit 9bb5a495424fd4bfa672eb1f31481248562fa156 upstream.
Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.
So adds checking for the return of skb_checksum_help().
Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -702,8 +702,6 @@ static bool hns3_tunnel_csum_bug(struct
if (!(!skb->encapsulation && l4.udp->dest == htons(IANA_VXLAN_PORT)))
return false;
- skb_checksum_help(skb);
-
return true;
}
@@ -764,8 +762,7 @@ static int hns3_set_l3l4_type_csum(struc
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
l3.hdr = skb_inner_network_header(skb);
@@ -796,7 +793,7 @@ static int hns3_set_l3l4_type_csum(struc
break;
case IPPROTO_UDP:
if (hns3_tunnel_csum_bug(skb))
- break;
+ return skb_checksum_help(skb);
hnae3_set_bit(*type_cs_vlan_tso, HNS3_TXD_L4CS_B, 1);
hnae3_set_field(*type_cs_vlan_tso,
@@ -821,8 +818,7 @@ static int hns3_set_l3l4_type_csum(struc
/* the stack computes the IP header already,
* driver calculate l4 checksum when not TSO.
*/
- skb_checksum_help(skb);
- return 0;
+ return skb_checksum_help(skb);
}
return 0;
^ permalink raw reply [flat|nested] 122+ messages in thread* [PATCH 4.19 116/116] usb: core: reduce power-on-good delay time of root hub
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (114 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 115/116] net: hns3: check the return of skb_checksum_help() Greg Kroah-Hartman
@ 2021-05-31 13:14 ` Greg Kroah-Hartman
2021-06-01 8:22 ` [PATCH 4.19 000/116] 4.19.193-rc1 review Samuel Zou
` (3 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Greg Kroah-Hartman @ 2021-05-31 13:14 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alan Stern, Chunfeng Yun
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.
Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.
Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/hub.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -146,8 +146,10 @@ static inline unsigned hub_power_on_good
{
unsigned delay = hub->descriptor->bPwrOn2PwrGood * 2;
- /* Wait at least 100 msec for power to become stable */
- return max(delay, 100U);
+ if (!hub->hdev->parent) /* root hub */
+ return delay;
+ else /* Wait at least 100 msec for power to become stable */
+ return max(delay, 100U);
}
static inline int hub_port_debounce_be_connected(struct usb_hub *hub,
^ permalink raw reply [flat|nested] 122+ messages in thread* Re: [PATCH 4.19 000/116] 4.19.193-rc1 review
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (115 preceding siblings ...)
2021-05-31 13:14 ` [PATCH 4.19 116/116] usb: core: reduce power-on-good delay time of root hub Greg Kroah-Hartman
@ 2021-06-01 8:22 ` Samuel Zou
2021-06-01 9:06 ` Pavel Machek
` (2 subsequent siblings)
119 siblings, 0 replies; 122+ messages in thread
From: Samuel Zou @ 2021-06-01 8:22 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On 2021/5/31 21:12, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.193 release.
> There are 116 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.193-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 4.19.193-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.193-rc1
Commit: a36d9536769615470fb664509e528787a54a26fa
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8857
passed: 8857
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8857
passed: 8857
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 122+ messages in thread* Re: [PATCH 4.19 000/116] 4.19.193-rc1 review
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (116 preceding siblings ...)
2021-06-01 8:22 ` [PATCH 4.19 000/116] 4.19.193-rc1 review Samuel Zou
@ 2021-06-01 9:06 ` Pavel Machek
2021-06-01 9:32 ` Naresh Kamboju
2021-06-02 2:23 ` Guenter Roeck
119 siblings, 0 replies; 122+ messages in thread
From: Pavel Machek @ 2021-06-01 9:06 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, stable
[-- Attachment #1: Type: text/plain, Size: 662 bytes --]
Hi!
> This is the start of the stable review cycle for the 4.19.193 release.
> There are 116 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 122+ messages in thread* Re: [PATCH 4.19 000/116] 4.19.193-rc1 review
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (117 preceding siblings ...)
2021-06-01 9:06 ` Pavel Machek
@ 2021-06-01 9:32 ` Naresh Kamboju
2021-06-02 2:23 ` Guenter Roeck
119 siblings, 0 replies; 122+ messages in thread
From: Naresh Kamboju @ 2021-06-01 9:32 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Shuah Khan, Florian Fainelli, patches, lkft-triage,
Jon Hunter, linux-stable, Pavel Machek, Andrew Morton,
Linus Torvalds, Guenter Roeck
On Mon, 31 May 2021 at 18:55, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.193 release.
> There are 116 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.193-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 4.19.193-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.19.y
* git commit: a36d9536769615470fb664509e528787a54a26fa
* git describe: v4.19.192-117-ga36d95367696
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.192-117-ga36d95367696
## No regressions (compared to v4.19.191-50-g01268129ebb2)
## Fixes (compared to v4.19.191-50-g01268129ebb2)
* ltp-mm-tests
- ksm03
- ksm03_1
* ltp-syscalls-tests
- semctl09
NOTE: The LTP test suite upgraded to latest release version LTP 20210524.
## Test result summary
total: 72900, pass: 57060, fail: 2715, skip: 12247, xfail: 878,
## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Naresh Kamboju
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 122+ messages in thread* Re: [PATCH 4.19 000/116] 4.19.193-rc1 review
2021-05-31 13:12 [PATCH 4.19 000/116] 4.19.193-rc1 review Greg Kroah-Hartman
` (118 preceding siblings ...)
2021-06-01 9:32 ` Naresh Kamboju
@ 2021-06-02 2:23 ` Guenter Roeck
119 siblings, 0 replies; 122+ messages in thread
From: Guenter Roeck @ 2021-06-02 2:23 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, stable
On Mon, May 31, 2021 at 03:12:56PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.193 release.
> There are 116 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 02 Jun 2021 13:06:20 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 424 pass: 424 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 122+ messages in thread