From: "Marek Behún" <marek.behun@nic.cz>
To: Stefan Roese <sr@denx.de>, u-boot@lists.denx.de
Cc: "Pali Rohár" <pali@kernel.org>, "Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell 0/7] Changes for Turris MOX
Date: Wed, 2 Jun 2021 19:09:54 +0200 [thread overview]
Message-ID: <20210602171001.29614-1-marek.behun@nic.cz> (raw)
Hello Stefan,
Here are some changes for Turris MOX:
- dts changes
- more config options enabled
- rescue mode support added
If it is possible, since this touches only our device, we would like
this to be also merged for v2021.07 (once reviewed by you and Pali).
(The last patch touches common armada-37xx.dtsi, but it only changes
name of a U-Boot's dts node to follow Linux' dts. No board code seems
to depend on this name.)
Marek
Marek Behún (7):
arm: mvebu: dts: turris_mox: add button and LED nodes
arm: mvebu: turris_mox: add support for board rescue mode
arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue
arm: mvebu: configs: turris_mox: add fdtfile default env variable
arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions
arm: mvebu: turris_mox: enable options for Turris network boot
arm64: a37xx: dts: rename internal-regs node
arch/arm/dts/armada-3720-turris-mox.dts | 55 ++++++++++++
arch/arm/dts/armada-37xx.dtsi | 2 +-
board/CZ.NIC/turris_mox/turris_mox.c | 106 ++++++++++++++++++++++++
configs/turris_mox_defconfig | 14 ++++
include/configs/turris_mox.h | 10 +++
5 files changed, 186 insertions(+), 1 deletion(-)
--
2.26.3
next reply other threads:[~2021-06-02 17:10 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 17:09 Marek Behún [this message]
2021-06-02 17:09 ` [PATCH u-boot-marvell 1/7] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-03 15:18 ` Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 3/7] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 4/7] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 5/7] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 6/7] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 7/7] arm64: a37xx: dts: rename internal-regs node Marek Behún
2021-06-03 15:20 ` Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-08 9:47 ` Pali Rohár
2021-06-10 5:06 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-08 9:48 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-08 9:49 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-08 9:50 ` Pali Rohár
2021-06-10 5:10 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-08 9:51 ` Pali Rohár
2021-06-10 5:12 ` Stefan Roese
2021-06-10 14:07 ` Pali Rohár
2021-06-10 14:28 ` Marek Behun
2021-06-11 4:14 ` Stefan Roese
2021-06-10 5:11 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-08 9:52 ` Pali Rohár
2021-06-10 5:11 ` Stefan Roese
2021-06-10 7:54 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602171001.29614-1-marek.behun@nic.cz \
--to=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.