From: "Marek Behún" <marek.behun@nic.cz>
To: Stefan Roese <sr@denx.de>, u-boot@lists.denx.de
Cc: "Pali Rohár" <pali@kernel.org>
Subject: Re: [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode
Date: Thu, 3 Jun 2021 17:18:51 +0200 [thread overview]
Message-ID: <20210603171851.0394786f@dellmb> (raw)
In-Reply-To: <20210602171001.29614-3-marek.behun@nic.cz>
On Wed, 2 Jun 2021 19:09:56 +0200
Marek Behún <marek.behun@nic.cz> wrote:
> +#define TURRIS_MOX_BOOTCMD_RESCUE \
> + "setenv bootargs \"console=ttyMV0,115200 " \
> + "earlycon=ar3700_uart,0xd0012000\" && " \
> + "sf probe && " \
> + "sf read ${kernel_addr_r} 0x190000 && " \
> + "lzmadec ${kernel_addr_r} ${ramdisk_addr_r} && " \
> + "bootm ${ramdisk_addr_r}"
OMG, we should use constants for addresses here instead of
${kernel_addr_r} and ${ramdisk_addr_r}, in case user changes or removed
this variables.
I will update this in v2.
> +
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "scriptaddr=0x4d00000\0" \
> "pxefile_addr_r=0x4e00000\0" \
> "fdt_addr_r=0x4f00000\0" \
> "kernel_addr_r=0x5000000\0" \
> "ramdisk_addr_r=0x8000000\0" \
> + "bootcmd_rescue=" TURRIS_MOX_BOOTCMD_RESCUE "\0" \
> BOOTENV
>
> #endif /* _CONFIG_TURRIS_MOX_H */
next prev parent reply other threads:[~2021-06-03 15:19 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 17:09 [PATCH u-boot-marvell 0/7] Changes for Turris MOX Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 1/7] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-03 15:18 ` Marek Behún [this message]
2021-06-02 17:09 ` [PATCH u-boot-marvell 3/7] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 4/7] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-02 17:09 ` [PATCH u-boot-marvell 5/7] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 6/7] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-02 17:10 ` [PATCH u-boot-marvell 7/7] arm64: a37xx: dts: rename internal-regs node Marek Behún
2021-06-03 15:20 ` Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Marek Behún
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes Marek Behún
2021-06-08 9:47 ` Pali Rohár
2021-06-10 5:06 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode Marek Behún
2021-06-08 9:48 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Marek Behún
2021-06-08 9:49 ` Pali Rohár
2021-06-10 5:09 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable Marek Behún
2021-06-08 9:50 ` Pali Rohár
2021-06-10 5:10 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Marek Behún
2021-06-08 9:51 ` Pali Rohár
2021-06-10 5:12 ` Stefan Roese
2021-06-10 14:07 ` Pali Rohár
2021-06-10 14:28 ` Marek Behun
2021-06-11 4:14 ` Stefan Roese
2021-06-10 5:11 ` Stefan Roese
2021-06-07 14:34 ` [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot Marek Behún
2021-06-08 9:52 ` Pali Rohár
2021-06-10 5:11 ` Stefan Roese
2021-06-10 7:54 ` [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210603171851.0394786f@dellmb \
--to=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.