All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
@ 2021-06-14 23:56 Konrad Dybcio
  2021-06-14 23:56 ` [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible Konrad Dybcio
  2021-06-14 23:56 ` [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes Konrad Dybcio
  0 siblings, 2 replies; 3+ messages in thread
From: Konrad Dybcio @ 2021-06-14 23:56 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Vinod Koul, Rob Herring, linux-arm-msm, dmaengine, devicetree,
	linux-kernel

No functional changes, just adding a new compatible for a different
SoC.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 Documentation/devicetree/bindings/dma/qcom,gpi.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index e302147e53c6..e614fe3187bb 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -21,6 +21,7 @@ properties:
     enum:
       - qcom,sdm845-gpi-dma
       - qcom,sm8150-gpi-dma
+      - qcom,sm8250-gpi-dma
 
   reg:
     maxItems: 1
-- 
2.32.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible
  2021-06-14 23:56 [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 Konrad Dybcio
@ 2021-06-14 23:56 ` Konrad Dybcio
  2021-06-14 23:56 ` [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes Konrad Dybcio
  1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2021-06-14 23:56 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Vinod Koul, Rob Herring, linux-arm-msm, dmaengine, devicetree,
	linux-kernel

SM8250 seems to work just fine, so add a shiny new compatible for it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/dma/qcom/gpi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 43ac3ab23d4c..1a1b7d8458c9 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -2282,6 +2282,7 @@ static int gpi_probe(struct platform_device *pdev)
 static const struct of_device_id gpi_of_match[] = {
 	{ .compatible = "qcom,sdm845-gpi-dma" },
 	{ .compatible = "qcom,sm8150-gpi-dma" },
+	{ .compatible = "qcom,sm8250-gpi-dma" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, gpi_of_match);
-- 
2.32.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes
  2021-06-14 23:56 [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 Konrad Dybcio
  2021-06-14 23:56 ` [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible Konrad Dybcio
@ 2021-06-14 23:56 ` Konrad Dybcio
  1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2021-06-14 23:56 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Vinod Koul, Rob Herring, linux-arm-msm, dmaengine, devicetree,
	linux-kernel

Add and configure GPI DMA nodes to enable the way for peripherals to make
DMA transfers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
Changes since v1:
- Use the right compatible :facepalm:

 arch/arm64/boot/dts/qcom/sm8250.dtsi | 64 ++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d45b6aa6fd05..806973d6ba55 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
@@ -520,6 +521,26 @@ opp-120000000 {
 			};
 		};
 
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8250-gpi-dma";
+			reg = <0 0x00800000 0 0x70000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x76 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
 		qupv3_id_2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -715,6 +736,29 @@ spi19: spi@894000 {
 			};
 		};
 
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8250-gpi-dma";
+			reg = <0 0x00900000 0 0x70000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <15>;
+			dma-channel-mask = <0x7ff>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x009c0000 0x0 0x6000>;
@@ -962,6 +1006,26 @@ spi7: spi@99c000 {
 			};
 		};
 
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8250-gpi-dma";
+			reg = <0 0x00a00000 0 0x70000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
-- 
2.32.0


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-06-14 23:56 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-14 23:56 [PATCH v2 1/3] dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250 Konrad Dybcio
2021-06-14 23:56 ` [PATCH v2 2/3] dmaengine: qcom: gpi: Add SM8250 compatible Konrad Dybcio
2021-06-14 23:56 ` [PATCH v2 3/3] arm64: dts: qcom: sm8250: Add GPI DMA nodes Konrad Dybcio

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.