All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Andreas Westman Dorcsak <hedmoo@yahoo.com>,
	Maxim Schwalm <maxim.schwalm@gmail.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Ihor Didenko <tailormoon@rambler.ru>,
	Ion Agorria <ion@agorria.com>,
	Matt Merhar <mattmerhar@protonmail.com>,
	Peter Geis <pgwipeout@gmail.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH v4 6/6] ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
Date: Wed, 16 Jun 2021 22:04:17 +0300	[thread overview]
Message-ID: <20210616190417.32214-7-digetx@gmail.com> (raw)
In-Reply-To: <20210616190417.32214-1-digetx@gmail.com>

Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU
temperature reporting and thermal throttling is available on all Tegra30
devices universally.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra30.dtsi | 87 ++++++++++++++++++++++++++++++++--
 1 file changed, 83 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c577c191be4b..404b6ecc9c20 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "tegra30-peripherals-opp.dtsi"
 
@@ -800,6 +801,20 @@ fuse@7000f800 {
 		reset-names = "fuse";
 	};
 
+	tsensor: tsensor@70014000 {
+		compatible = "nvidia,tegra30-tsensor";
+		reg = <0x70014000 0x500>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		resets = <&tegra_car TEGRA30_CLK_TSENSOR>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>;
+		assigned-clock-rates = <500000>;
+
+		#thermal-sensor-cells = <1>;
+	};
+
 	hda@70030000 {
 		compatible = "nvidia,tegra30-hda";
 		reg = <0x70030000 0x10000>;
@@ -1062,32 +1077,36 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -1102,4 +1121,64 @@ pmu {
 				     <&{/cpus/cpu@2}>,
 				     <&{/cpus/cpu@3}>;
 	};
+
+	thermal-zones {
+		tsensor-channel0 {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				level1_trip: dvfs-alert {
+					/* throttle at 80C until temperature drops to 79.8C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				level2_trip: cpu-div2-throttle {
+					/* hardware CPU x2 freq throttle at 85C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "hot";
+				};
+
+				level3_trip: soc-critical {
+					/* hardware shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&level1_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tsensor-channel1 {
+			status = "disabled";
+
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 1>;
+
+			trips {
+				dvfs-alert {
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+		};
+	};
 };
-- 
2.30.2


  parent reply	other threads:[~2021-06-16 19:05 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16 19:04 [PATCH v4 0/6] Add driver for NVIDIA Tegra30 SoC Thermal sensor Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 1/6] dt-bindings: thermal: Add binding for Tegra30 thermal sensor Dmitry Osipenko
2021-06-21  9:46   ` [thermal: thermal/next] " thermal-bot for Dmitry Osipenko
2021-07-04 18:02   ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 2/6] thermal: thermal_of: Stop zone device before unregistering it Dmitry Osipenko
2021-06-21  9:46   ` [thermal: thermal/next] thermal/core/thermal_of: " thermal-bot for Dmitry Osipenko
2021-07-04 18:02   ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 3/6] thermal/drivers/tegra: Add driver for Tegra30 thermal sensor Dmitry Osipenko
2021-06-21  9:46   ` [thermal: thermal/next] " thermal-bot for Dmitry Osipenko
2021-09-09 14:38   ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 4/6] ARM: tegra_defconfig: Enable CONFIG_TEGRA30_TSENSOR Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 5/6] ARM: multi_v7_defconfig: " Dmitry Osipenko
2021-06-16 19:04 ` Dmitry Osipenko [this message]
2021-06-21 17:13 ` [PATCH v4 0/6] Add driver for NVIDIA Tegra30 SoC Thermal sensor Daniel Lezcano
2021-06-21 17:26   ` Dmitry Osipenko
2021-06-21 18:16     ` Daniel Lezcano
2021-06-21 18:25       ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616190417.32214-7-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=amitk@kernel.org \
    --cc=clamor95@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hedmoo@yahoo.com \
    --cc=ion@agorria.com \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mattmerhar@protonmail.com \
    --cc=maxim.schwalm@gmail.com \
    --cc=pgwipeout@gmail.com \
    --cc=rui.zhang@intel.com \
    --cc=tailormoon@rambler.ru \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH v4 6/6] ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.