From: Jagan Teki <jagan@amarulasolutions.com>
To: Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Tomasz Figa <t.figa@samsung.com>, Fancy Fang <chen.fang@nxp.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
linux-amarula@amarulasolutions.com,
Anthony Brandon <anthony@amarulasolutions.com>,
Francis Laniel <francis.laniel@amarulasolutions.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
Milco Pratesi <milco.pratesi@engicam.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support
Date: Mon, 21 Jun 2021 12:54:15 +0530 [thread overview]
Message-ID: <20210621072424.111733-1-jagan@amarulasolutions.com> (raw)
This series support MIPI DSI on i.MX8MM.
It worked directly with existing mxsfb driver but the SEC DSIM
timings has to be validate and tested through all platforms,
ie reason I'm sending it as RFC.
Tested on Engicam i.Core MX8M Mini SoM.
patch 1: dt-bindings for SEC MIPI DSIM
patch 2: SEC MIPI DSIM bridge driver
patch 3: dt-bindings for SEC DSIM DPHY
patch 4: SEC DSIM DPHY driver
patch 5: MIPI DPHY reset enable in blk-ctl
patch 6: display mix blk ctl node
patch 7: eLCDIF node
patch 8: MIPI DSI pipeline nodes
patch 9: Enable LVDS panel on EDIMM2.2
Note:
- all these patches on top of Peng Fan's blk-ctl driver.
- anyone interest, please have a look on this repo
https://github.com/openedev/linux/commits/imx8mm
Any inputs?
Jagan.
Jagan Teki (9):
dt-bindings: display: bridge: Add Samsung SEC MIPI DSIM bindings
drm: bridge: Add Samsung SEC MIPI DSIM bridge driver
dt-bindings: phy: Add SEC DSIM DPHY bindings
phy: samsung: Add SEC DSIM DPHY driver
soc: imx8mm: blk-ctl: Add MIPI DPHY reset enable
arm64: dts: imx8mm: Add display mix blk ctl
arm64: dts: imx8mm: Add eLCDIF node support
arm64: dts: imx8mm: Add MIPI DSI pipeline
arm64: dts: imx8mm-icore: Enable LVDS panel for EDIMM2.2
.../display/bridge/samsung,sec-dsim.yaml | 184 ++
.../bindings/phy/samsung,sec-dsim-dphy.yaml | 56 +
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 90 +
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 104 ++
drivers/gpu/drm/bridge/Kconfig | 15 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++
drivers/phy/samsung/Kconfig | 9 +
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-sec-dsim-dphy.c | 236 +++
drivers/soc/imx/blk-ctl-imx8mm.c | 4 +
include/dt-bindings/power/imx8mm-power.h | 5 +-
12 files changed, 2238 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml
create mode 100644 Documentation/devicetree/bindings/phy/samsung,sec-dsim-dphy.yaml
create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
create mode 100644 drivers/phy/samsung/phy-sec-dsim-dphy.c
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Tomasz Figa <t.figa@samsung.com>, Fancy Fang <chen.fang@nxp.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
linux-amarula@amarulasolutions.com,
Anthony Brandon <anthony@amarulasolutions.com>,
Francis Laniel <francis.laniel@amarulasolutions.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
Milco Pratesi <milco.pratesi@engicam.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support
Date: Mon, 21 Jun 2021 12:54:15 +0530 [thread overview]
Message-ID: <20210621072424.111733-1-jagan@amarulasolutions.com> (raw)
This series support MIPI DSI on i.MX8MM.
It worked directly with existing mxsfb driver but the SEC DSIM
timings has to be validate and tested through all platforms,
ie reason I'm sending it as RFC.
Tested on Engicam i.Core MX8M Mini SoM.
patch 1: dt-bindings for SEC MIPI DSIM
patch 2: SEC MIPI DSIM bridge driver
patch 3: dt-bindings for SEC DSIM DPHY
patch 4: SEC DSIM DPHY driver
patch 5: MIPI DPHY reset enable in blk-ctl
patch 6: display mix blk ctl node
patch 7: eLCDIF node
patch 8: MIPI DSI pipeline nodes
patch 9: Enable LVDS panel on EDIMM2.2
Note:
- all these patches on top of Peng Fan's blk-ctl driver.
- anyone interest, please have a look on this repo
https://github.com/openedev/linux/commits/imx8mm
Any inputs?
Jagan.
Jagan Teki (9):
dt-bindings: display: bridge: Add Samsung SEC MIPI DSIM bindings
drm: bridge: Add Samsung SEC MIPI DSIM bridge driver
dt-bindings: phy: Add SEC DSIM DPHY bindings
phy: samsung: Add SEC DSIM DPHY driver
soc: imx8mm: blk-ctl: Add MIPI DPHY reset enable
arm64: dts: imx8mm: Add display mix blk ctl
arm64: dts: imx8mm: Add eLCDIF node support
arm64: dts: imx8mm: Add MIPI DSI pipeline
arm64: dts: imx8mm-icore: Enable LVDS panel for EDIMM2.2
.../display/bridge/samsung,sec-dsim.yaml | 184 ++
.../bindings/phy/samsung,sec-dsim-dphy.yaml | 56 +
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 90 +
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 104 ++
drivers/gpu/drm/bridge/Kconfig | 15 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++
drivers/phy/samsung/Kconfig | 9 +
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-sec-dsim-dphy.c | 236 +++
drivers/soc/imx/blk-ctl-imx8mm.c | 4 +
include/dt-bindings/power/imx8mm-power.h | 5 +-
12 files changed, 2238 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml
create mode 100644 Documentation/devicetree/bindings/phy/samsung,sec-dsim-dphy.yaml
create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
create mode 100644 drivers/phy/samsung/phy-sec-dsim-dphy.c
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Tomasz Figa <t.figa@samsung.com>, Fancy Fang <chen.fang@nxp.com>
Cc: devicetree@vger.kernel.org,
Francis Laniel <francis.laniel@amarulasolutions.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
NXP Linux Team <linux-imx@nxp.com>,
Milco Pratesi <milco.pratesi@engicam.com>,
Anthony Brandon <anthony@amarulasolutions.com>,
linux-phy@lists.infradead.org,
linux-amarula@amarulasolutions.com,
linux-arm-kernel@lists.infradead.org,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support
Date: Mon, 21 Jun 2021 12:54:15 +0530 [thread overview]
Message-ID: <20210621072424.111733-1-jagan@amarulasolutions.com> (raw)
This series support MIPI DSI on i.MX8MM.
It worked directly with existing mxsfb driver but the SEC DSIM
timings has to be validate and tested through all platforms,
ie reason I'm sending it as RFC.
Tested on Engicam i.Core MX8M Mini SoM.
patch 1: dt-bindings for SEC MIPI DSIM
patch 2: SEC MIPI DSIM bridge driver
patch 3: dt-bindings for SEC DSIM DPHY
patch 4: SEC DSIM DPHY driver
patch 5: MIPI DPHY reset enable in blk-ctl
patch 6: display mix blk ctl node
patch 7: eLCDIF node
patch 8: MIPI DSI pipeline nodes
patch 9: Enable LVDS panel on EDIMM2.2
Note:
- all these patches on top of Peng Fan's blk-ctl driver.
- anyone interest, please have a look on this repo
https://github.com/openedev/linux/commits/imx8mm
Any inputs?
Jagan.
Jagan Teki (9):
dt-bindings: display: bridge: Add Samsung SEC MIPI DSIM bindings
drm: bridge: Add Samsung SEC MIPI DSIM bridge driver
dt-bindings: phy: Add SEC DSIM DPHY bindings
phy: samsung: Add SEC DSIM DPHY driver
soc: imx8mm: blk-ctl: Add MIPI DPHY reset enable
arm64: dts: imx8mm: Add display mix blk ctl
arm64: dts: imx8mm: Add eLCDIF node support
arm64: dts: imx8mm: Add MIPI DSI pipeline
arm64: dts: imx8mm-icore: Enable LVDS panel for EDIMM2.2
.../display/bridge/samsung,sec-dsim.yaml | 184 ++
.../bindings/phy/samsung,sec-dsim-dphy.yaml | 56 +
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 90 +
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 104 ++
drivers/gpu/drm/bridge/Kconfig | 15 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++
drivers/phy/samsung/Kconfig | 9 +
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-sec-dsim-dphy.c | 236 +++
drivers/soc/imx/blk-ctl-imx8mm.c | 4 +
include/dt-bindings/power/imx8mm-power.h | 5 +-
12 files changed, 2238 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml
create mode 100644 Documentation/devicetree/bindings/phy/samsung,sec-dsim-dphy.yaml
create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
create mode 100644 drivers/phy/samsung/phy-sec-dsim-dphy.c
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: Peng Fan <peng.fan@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Tomasz Figa <t.figa@samsung.com>, Fancy Fang <chen.fang@nxp.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
linux-amarula@amarulasolutions.com,
Anthony Brandon <anthony@amarulasolutions.com>,
Francis Laniel <francis.laniel@amarulasolutions.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
Milco Pratesi <milco.pratesi@engicam.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support
Date: Mon, 21 Jun 2021 12:54:15 +0530 [thread overview]
Message-ID: <20210621072424.111733-1-jagan@amarulasolutions.com> (raw)
This series support MIPI DSI on i.MX8MM.
It worked directly with existing mxsfb driver but the SEC DSIM
timings has to be validate and tested through all platforms,
ie reason I'm sending it as RFC.
Tested on Engicam i.Core MX8M Mini SoM.
patch 1: dt-bindings for SEC MIPI DSIM
patch 2: SEC MIPI DSIM bridge driver
patch 3: dt-bindings for SEC DSIM DPHY
patch 4: SEC DSIM DPHY driver
patch 5: MIPI DPHY reset enable in blk-ctl
patch 6: display mix blk ctl node
patch 7: eLCDIF node
patch 8: MIPI DSI pipeline nodes
patch 9: Enable LVDS panel on EDIMM2.2
Note:
- all these patches on top of Peng Fan's blk-ctl driver.
- anyone interest, please have a look on this repo
https://github.com/openedev/linux/commits/imx8mm
Any inputs?
Jagan.
Jagan Teki (9):
dt-bindings: display: bridge: Add Samsung SEC MIPI DSIM bindings
drm: bridge: Add Samsung SEC MIPI DSIM bridge driver
dt-bindings: phy: Add SEC DSIM DPHY bindings
phy: samsung: Add SEC DSIM DPHY driver
soc: imx8mm: blk-ctl: Add MIPI DPHY reset enable
arm64: dts: imx8mm: Add display mix blk ctl
arm64: dts: imx8mm: Add eLCDIF node support
arm64: dts: imx8mm: Add MIPI DSI pipeline
arm64: dts: imx8mm-icore: Enable LVDS panel for EDIMM2.2
.../display/bridge/samsung,sec-dsim.yaml | 184 ++
.../bindings/phy/samsung,sec-dsim-dphy.yaml | 56 +
.../freescale/imx8mm-icore-mx8mm-edimm2.2.dts | 90 +
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 104 ++
drivers/gpu/drm/bridge/Kconfig | 15 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/sec-dsim.c | 1535 +++++++++++++++++
drivers/phy/samsung/Kconfig | 9 +
drivers/phy/samsung/Makefile | 1 +
drivers/phy/samsung/phy-sec-dsim-dphy.c | 236 +++
drivers/soc/imx/blk-ctl-imx8mm.c | 4 +
include/dt-bindings/power/imx8mm-power.h | 5 +-
12 files changed, 2238 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,sec-dsim.yaml
create mode 100644 Documentation/devicetree/bindings/phy/samsung,sec-dsim-dphy.yaml
create mode 100644 drivers/gpu/drm/bridge/sec-dsim.c
create mode 100644 drivers/phy/samsung/phy-sec-dsim-dphy.c
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2021-06-21 7:24 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-21 7:24 Jagan Teki [this message]
2021-06-21 7:24 ` [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 1/9] dt-bindings: display: bridge: Add Samsung SEC MIPI DSIM bindings Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:55 ` Laurent Pinchart
2021-06-21 17:55 ` Laurent Pinchart
2021-06-21 17:55 ` Laurent Pinchart
2021-06-21 17:55 ` Laurent Pinchart
2021-06-23 15:44 ` Jagan Teki
2021-06-23 15:44 ` Jagan Teki
2021-06-23 15:44 ` Jagan Teki
2021-06-23 15:44 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 2/9] drm: bridge: Add Samsung SEC MIPI DSIM bridge driver Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-23 22:22 ` Laurent Pinchart
2021-06-23 22:22 ` Laurent Pinchart
2021-06-23 22:22 ` Laurent Pinchart
2021-06-23 22:22 ` Laurent Pinchart
2021-06-24 2:48 ` Fabio Estevam
2021-06-24 2:48 ` Fabio Estevam
2021-06-24 2:48 ` Fabio Estevam
2021-06-24 2:48 ` Fabio Estevam
2021-06-24 8:30 ` Krzysztof Kozlowski
2021-06-24 8:30 ` Krzysztof Kozlowski
2021-06-24 8:30 ` Krzysztof Kozlowski
2021-06-24 8:30 ` Krzysztof Kozlowski
2021-06-28 8:19 ` Frieder Schrempf
2021-06-28 8:19 ` Frieder Schrempf
2021-06-28 8:19 ` Frieder Schrempf
2021-06-28 8:19 ` Frieder Schrempf
2021-06-30 10:21 ` Jagan Teki
2021-06-30 10:21 ` Jagan Teki
2021-06-30 10:21 ` Jagan Teki
2021-06-30 10:21 ` Jagan Teki
2021-06-24 12:12 ` Jagan Teki
2021-06-24 12:12 ` Jagan Teki
2021-06-24 12:12 ` Jagan Teki
2021-06-24 12:12 ` Jagan Teki
2021-06-24 12:17 ` Laurent Pinchart
2021-06-24 12:17 ` Laurent Pinchart
2021-06-24 12:17 ` Laurent Pinchart
2021-06-24 12:17 ` Laurent Pinchart
2021-06-24 12:32 ` Jagan Teki
2021-06-24 12:32 ` Jagan Teki
2021-06-24 12:32 ` Jagan Teki
2021-06-24 12:32 ` Jagan Teki
2021-06-24 12:46 ` Fabio Estevam
2021-06-24 12:46 ` Fabio Estevam
2021-06-24 12:46 ` Fabio Estevam
2021-06-24 12:46 ` Fabio Estevam
2021-06-24 12:46 ` Laurent Pinchart
2021-06-24 12:46 ` Laurent Pinchart
2021-06-24 12:46 ` Laurent Pinchart
2021-06-24 12:46 ` Laurent Pinchart
2021-06-25 8:19 ` Jagan Teki
2021-06-25 8:19 ` Jagan Teki
2021-06-25 8:19 ` Jagan Teki
2021-06-25 8:19 ` Jagan Teki
2021-06-25 9:21 ` Krzysztof Kozlowski
2021-06-25 9:21 ` Krzysztof Kozlowski
2021-06-25 9:21 ` Krzysztof Kozlowski
2021-06-25 9:21 ` Krzysztof Kozlowski
2021-06-25 10:08 ` Jagan Teki
2021-06-25 10:08 ` Jagan Teki
2021-06-25 10:08 ` Jagan Teki
2021-06-25 10:08 ` Jagan Teki
2021-06-25 10:27 ` Krzysztof Kozlowski
2021-06-25 10:27 ` Krzysztof Kozlowski
2021-06-25 10:27 ` Krzysztof Kozlowski
2021-06-25 10:27 ` Krzysztof Kozlowski
2021-06-24 12:11 ` Jagan Teki
2021-06-24 12:11 ` Jagan Teki
2021-06-24 12:11 ` Jagan Teki
2021-06-24 12:11 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 3/9] dt-bindings: phy: Add SEC DSIM DPHY bindings Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-21 17:40 ` Rob Herring
2021-06-22 16:56 ` Rob Herring
2021-06-22 16:56 ` Rob Herring
2021-06-22 16:56 ` Rob Herring
2021-06-22 16:56 ` Rob Herring
2021-06-21 7:24 ` [RFC PATCH 4/9] phy: samsung: Add SEC DSIM DPHY driver Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-24 8:45 ` Krzysztof Kozlowski
2021-06-24 8:45 ` Krzysztof Kozlowski
2021-06-24 8:45 ` Krzysztof Kozlowski
2021-06-24 8:45 ` Krzysztof Kozlowski
2021-06-21 7:24 ` [RFC PATCH 5/9] soc: imx8mm: blk-ctl: Add MIPI DPHY reset enable Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 6/9] arm64: dts: imx8mm: Add display mix blk ctl Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 7/9] arm64: dts: imx8mm: Add eLCDIF node support Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-22 3:09 ` Adam Ford
2021-06-22 3:09 ` Adam Ford
2021-06-22 3:09 ` Adam Ford
2021-06-22 3:09 ` Adam Ford
2021-06-22 13:59 ` Jagan Teki
2021-06-22 13:59 ` Jagan Teki
2021-06-22 13:59 ` Jagan Teki
2021-06-22 13:59 ` Jagan Teki
2021-06-21 7:24 ` [RFC PATCH 8/9] arm64: dts: imx8mm: Add MIPI DSI pipeline Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-22 3:02 ` Adam Ford
2021-06-22 3:02 ` Adam Ford
2021-06-22 3:02 ` Adam Ford
2021-06-22 3:02 ` Adam Ford
2021-06-21 7:24 ` [RFC PATCH 9/9] arm64: dts: imx8mm-icore: Enable LVDS panel for EDIMM2.2 Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-21 7:24 ` Jagan Teki
2021-06-29 7:10 ` [RFC PATCH 0/9] arm64: imx8mm: Add MIPI DSI support Peng Fan (OSS)
2021-06-29 7:10 ` Peng Fan (OSS)
2021-06-29 7:10 ` Peng Fan (OSS)
2021-06-29 7:10 ` Peng Fan (OSS)
2021-06-30 12:24 ` Jagan Teki
2021-06-30 12:24 ` Jagan Teki
2021-06-30 12:24 ` Jagan Teki
2021-06-30 12:24 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210621072424.111733-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=anthony@amarulasolutions.com \
--cc=chen.fang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=francis.laniel@amarulasolutions.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=matteo.lisi@engicam.com \
--cc=milco.pratesi@engicam.com \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.