* [PATCH v2 0/6] Toradex boards' specific patches @ 2021-07-23 6:39 Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 1/6] board: colibri_imx7: use SDP if USB serial downloader has been used Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot Cc: Oleksandr Suvorov, Harald Seiler, Igor Opaniuk, Marcel Ziswiler, Ming Liu, Philippe Schenker, Simon Glass, Stefan Agner There is the set of patches for Toradex boards. Changes in v2: - remove 2 patches not meet requirements. END Marcel Ziswiler (1): board: apalis-tk1: launch toradex easy installer in usb recovery Ming Liu (1): board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL Oleksandr Suvorov (2): board: colibri-imx8x: update building documentation board: colibri_vf: fix compiling warning Stefan Agner (2): board: colibri_imx7: use SDP if USB serial downloader has been used board: toradex: make USB PID from config block optional board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++-- board/toradex/colibri_imx6/colibri_imx6.c | 10 +++++++++ board/toradex/colibri_imx7/colibri_imx7.c | 10 +++++++++ board/toradex/colibri_vf/colibri_vf.c | 2 +- board/toradex/common/Kconfig | 10 +++++++++ board/toradex/common/tdx-common.c | 2 +- doc/board/toradex/colibri-imx8x.rst | 27 +++++++---------------- 7 files changed, 51 insertions(+), 23 deletions(-) -- 2.31.1 ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/6] board: colibri_imx7: use SDP if USB serial downloader has been used 2021-07-23 6:39 [PATCH v2 0/6] Toradex boards' specific patches Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 2/6] board: toradex: make USB PID from config block optional Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot Cc: Stefan Agner, Oleksandr Suvorov, Harald Seiler, Igor Opaniuk, Simon Glass From: Stefan Agner <stefan.agner@toradex.com> In case USB serial downloader has been used to load U-Boot start the serial download protocol (SDP) emulation. This allows to download complete images such as Toradex Easy Installer over USB SDP as well. This code uses the boot ROM provided boot information to reliably detect USB serial downloader. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None board/toradex/colibri_imx7/colibri_imx7.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index 301b07d5b4..6822102d2c 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -355,12 +355,22 @@ int board_usb_phy_mode(int port) } } +#if defined(CONFIG_BOARD_LATE_INIT) int board_late_init(void) { #if defined(CONFIG_DM_VIDEO) setup_lcd(); #endif + +#if defined(CONFIG_CMD_USB_SDP) + if (is_boot_from_usb()) { + printf("Serial Downloader recovery mode, using sdp command\n"); + env_set("bootdelay", "0"); + env_set("bootcmd", "sdp 0"); + } +#endif return 0; } +#endif /* CONFIG_BOARD_LATE_INIT */ #endif -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 2/6] board: toradex: make USB PID from config block optional 2021-07-23 6:39 ` [PATCH v2 1/6] board: colibri_imx7: use SDP if USB serial downloader has been used Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 3/6] board: colibri-imx8x: update building documentation Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot; +Cc: Stefan Agner, Oleksandr Suvorov, Igor Opaniuk From: Stefan Agner <stefan.agner@toradex.com> If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None board/toradex/common/Kconfig | 10 ++++++++++ board/toradex/common/tdx-common.c | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/board/toradex/common/Kconfig b/board/toradex/common/Kconfig index 36068d2e3b..1f6a5e4db5 100644 --- a/board/toradex/common/Kconfig +++ b/board/toradex/common/Kconfig @@ -84,4 +84,14 @@ config TDX_CFG_BLOCK_EXTRA Enables fetching auxilary config blocks from carrier board/display adapter EEPROMs. +config TDX_CFG_BLOCK_USB_GADGET_PID + bool "Use config block product ID as USB product ID" + depends on USB_GADGET_DOWNLOAD + default y + help + Use the Toradex product ID learned from the config block as USB + product ID. An offset of 0x4000 is added to the product ID since + inside the Toradex vendor ID (0x1b67) the range starting from + offset 0x4000 is reserved for Colibri/Apalis modules. + endif diff --git a/board/toradex/common/tdx-common.c b/board/toradex/common/tdx-common.c index a3d287ed5e..061abf7537 100644 --- a/board/toradex/common/tdx-common.c +++ b/board/toradex/common/tdx-common.c @@ -147,7 +147,7 @@ int show_board_info(void) return 0; } -#ifdef CONFIG_USB_GADGET_DOWNLOAD +#ifdef CONFIG_TDX_CFG_BLOCK_USB_GADGET_PID int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { unsigned short usb_pid; -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 3/6] board: colibri-imx8x: update building documentation 2021-07-23 6:39 ` [PATCH v2 2/6] board: toradex: make USB PID from config block optional Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 4/6] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot; +Cc: Oleksandr Suvorov, Igor Opaniuk, Philippe Schenker Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None doc/board/toradex/colibri-imx8x.rst | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst index 616f40ae0f..545568c844 100644 --- a/doc/board/toradex/colibri-imx8x.rst +++ b/doc/board/toradex/colibri-imx8x.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: GPL-2.0+ -Colibri iMX8QXP V1.0B Module +Colibri iMX8QXP V1.0D Module ============================ Quick Start @@ -18,34 +18,23 @@ Get and Build the ARM Trusted Firmware .. code-block:: bash - $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf - $ cd imx-atf/ - $ make PLAT=imx8qxp bl31 + $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git/ + $ make PLAT=imx8qx bl31 -C imx-atf Get scfw_tcm.bin and ahab-container.img --------------------------------------- .. code-block:: bash - $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/ - toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes- - bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true - $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin - $ chmod +x firmware-imx-8.0.bin - $ ./firmware-imx-8.0.bin - -Copy the following binaries to the U-Boot folder: - -.. code-block:: bash - - $ cp imx-atf/build/imx8qxp/release/bl31.bin . - $ cp u-boot/u-boot.bin . + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin + $ sh imx-seco-3.7.4.bin --auto-accept Copy the following firmware to the U-Boot folder: .. code-block:: bash - $ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + $ cp imx-atf/build/imx8qx/release/bl31.bin . + $ cp imx-seco-3.7.4/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img Build U-Boot ------------ -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 4/6] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL 2021-07-23 6:39 ` [PATCH v2 3/6] board: colibri-imx8x: update building documentation Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 5/6] board: colibri_vf: fix compiling warning Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot; +Cc: Ming Liu, Oleksandr Suvorov, Harald Seiler, Simon Glass From: Ming Liu <ming.liu@toradex.com> Only one dtb is currently supported, so match with imx6-colibri. Signed-off-by: Ming Liu <ming.liu@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None board/toradex/colibri_imx6/colibri_imx6.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index c0e7754469..587d92a8e9 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -1081,6 +1081,16 @@ void board_init_f(ulong dummy) board_init_r(NULL, 0); } +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + if (!strcmp(name, "imx6-colibri")) + return 0; + + return -1; +} +#endif + void reset_cpu(void) { } -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 5/6] board: colibri_vf: fix compiling warning 2021-07-23 6:39 ` [PATCH v2 4/6] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery Oleksandr Suvorov 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot; +Cc: Oleksandr Suvorov, Igor Opaniuk, Simon Glass This patch fixes the following compiler warning: ============= board/toradex/colibri_vf/colibri_vf.c: In function 'ft_board_setup': board/toradex/colibri_vf/colibri_vf.c:436:6: warning: unused variable 'ret' [-Wunused-variable] ============= Fixes: be3f1a56bf8 ("video: fsl_dcu_fb: add DM_VIDEO support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: None board/toradex/colibri_vf/colibri_vf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index e9c5bc0632..c09591e543 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -433,7 +433,7 @@ int checkboard(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, struct bd_info *bd) { -#ifndef CONFIG_DM_VIDEO +#if defined(CONFIG_VIDEO_FSL_DCU_FB) && !defined(CONFIG_DM_VIDEO) int ret = 0; #endif #ifdef CONFIG_FDT_FIXUP_PARTITIONS -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery 2021-07-23 6:39 ` [PATCH v2 5/6] board: colibri_vf: fix compiling warning Oleksandr Suvorov @ 2021-07-23 6:39 ` Oleksandr Suvorov 2021-08-06 11:03 ` Stefano Babic 0 siblings, 1 reply; 9+ messages in thread From: Oleksandr Suvorov @ 2021-07-23 6:39 UTC (permalink / raw) To: u-boot; +Cc: Marcel Ziswiler, Oleksandr Suvorov, Simon Glass From: Marcel Ziswiler <marcel.ziswiler@toradex.com> The USB recovery mode is used by Toradex to load the Toradex Easy Installer image which supports further system images installation. Prepare for loading and launching the Toradex Easy Installer if the USB Recovery mode is activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- Changes in v2: - remove 2 patches not meet requirements. END board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c index b97617cfca..f418f2c39f 100644 --- a/board/toradex/apalis-tk1/apalis-tk1.c +++ b/board/toradex/apalis-tk1/apalis-tk1.c @@ -38,8 +38,17 @@ int arch_misc_init(void) { if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == - NVBOOTTYPE_RECOVERY) - printf("USB recovery mode\n"); + NVBOOTTYPE_RECOVERY) { + printf("USB recovery mode, attempting to boot Toradex Easy Installer\n"); + env_set("bootdelay", "-2"); + env_set("defargs", "pcie_aspm=off user_debug=30"); + env_set("fdt_high", ""); + env_set("initrd_high", ""); + env_set("setup", "env set setupargs igb_mac=${ethaddr} consoleblank=0 no_console_suspend=1 console=${console},${baudrate}n8 ${memargs}"); + env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet autoinstall"); + env_set("vidargs", "video=HDMI-A-1:640x480-16@60D"); + env_set("bootcmd", "run setup; env set bootargs ${defargs} ${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000#config@${soc}-${fdt_module}-${fdt_board}.dtb"); + } /* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */ gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication"); -- 2.31.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery 2021-07-23 6:39 ` [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery Oleksandr Suvorov @ 2021-08-06 11:03 ` Stefano Babic 2021-08-11 9:50 ` Marcel Ziswiler 0 siblings, 1 reply; 9+ messages in thread From: Stefano Babic @ 2021-08-06 11:03 UTC (permalink / raw) To: Oleksandr Suvorov, u-boot; +Cc: Marcel Ziswiler, Simon Glass On 23.07.21 08:39, Oleksandr Suvorov wrote: > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > The USB recovery mode is used by Toradex to load the Toradex Easy > Installer image which supports further system images installation. > Prepare for loading and launching the Toradex Easy Installer if the > USB Recovery mode is activated. > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> > --- > > Changes in v2: > - remove 2 patches not meet requirements. > END > > board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c > index b97617cfca..f418f2c39f 100644 > --- a/board/toradex/apalis-tk1/apalis-tk1.c > +++ b/board/toradex/apalis-tk1/apalis-tk1.c > @@ -38,8 +38,17 @@ > int arch_misc_init(void) > { > if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == > - NVBOOTTYPE_RECOVERY) > - printf("USB recovery mode\n"); > + NVBOOTTYPE_RECOVERY) { > + printf("USB recovery mode, attempting to boot Toradex Easy Installer\n"); > + env_set("bootdelay", "-2"); > + env_set("defargs", "pcie_aspm=off user_debug=30"); > + env_set("fdt_high", ""); > + env_set("initrd_high", ""); > + env_set("setup", "env set setupargs igb_mac=${ethaddr} consoleblank=0 no_console_suspend=1 console=${console},${baudrate}n8 ${memargs}"); > + env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet autoinstall"); > + env_set("vidargs", "video=HDMI-A-1:640x480-16@60D"); > + env_set("bootcmd", "run setup; env set bootargs ${defargs} ${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000#config@${soc}-${fdt_module}-${fdt_board}.dtb"); These above are very long lines making checkpatch unhgappy. Can we switch to a multiline ? Best regards, Stefano > + } > > /* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */ > gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication"); > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de ===================================================================== ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery 2021-08-06 11:03 ` Stefano Babic @ 2021-08-11 9:50 ` Marcel Ziswiler 0 siblings, 0 replies; 9+ messages in thread From: Marcel Ziswiler @ 2021-08-11 9:50 UTC (permalink / raw) To: u-boot, sbabic, Oleksandr Suvorov; +Cc: sjg On Fri, 2021-08-06 at 13:03 +0200, Stefano Babic wrote: > On 23.07.21 08:39, Oleksandr Suvorov wrote: > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > The USB recovery mode is used by Toradex to load the Toradex Easy > > Installer image which supports further system images installation. > > Prepare for loading and launching the Toradex Easy Installer if the > > USB Recovery mode is activated. > > > > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> > > --- > > > > Changes in v2: > > - remove 2 patches not meet requirements. > > END > > > > board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++++-- > > 1 file changed, 11 insertions(+), 2 deletions(-) > > > > diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c > > index b97617cfca..f418f2c39f 100644 > > --- a/board/toradex/apalis-tk1/apalis-tk1.c > > +++ b/board/toradex/apalis-tk1/apalis-tk1.c > > @@ -38,8 +38,17 @@ > > int arch_misc_init(void) > > { > > if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == > > - NVBOOTTYPE_RECOVERY) > > - printf("USB recovery mode\n"); > > + NVBOOTTYPE_RECOVERY) { > > + printf("USB recovery mode, attempting to boot Toradex Easy Installer\n"); > > + env_set("bootdelay", "-2"); > > + env_set("defargs", "pcie_aspm=off user_debug=30"); > > + env_set("fdt_high", ""); > > + env_set("initrd_high", ""); > > + env_set("setup", "env set setupargs igb_mac=${ethaddr} consoleblank=0 no_console_suspend=1 > > console=${console},${baudrate}n8 ${memargs}"); > > + env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet autoinstall"); > > + env_set("vidargs", "video=HDMI-A-1:640x480-16@60D"); > > + env_set("bootcmd", "run setup; env set bootargs ${defargs} ${setupargs} ${vidargs} > > ${teziargs}; bootm 0x80208000#config@${soc}-${fdt_module}-${fdt_board}.dtb"); > > These above are very long lines making checkpatch unhgappy. Can we > switch to a multiline ? Yes, I fully agree. I will pick it up and send a v3 shortly as Oleksandr unfortunately meanwhile left our company. > Best regards, > Stefano > > > + } > > > > /* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */ > > gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication"); ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-08-11 9:50 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-23 6:39 [PATCH v2 0/6] Toradex boards' specific patches Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 1/6] board: colibri_imx7: use SDP if USB serial downloader has been used Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 2/6] board: toradex: make USB PID from config block optional Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 3/6] board: colibri-imx8x: update building documentation Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 4/6] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 5/6] board: colibri_vf: fix compiling warning Oleksandr Suvorov 2021-07-23 6:39 ` [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery Oleksandr Suvorov 2021-08-06 11:03 ` Stefano Babic 2021-08-11 9:50 ` Marcel Ziswiler
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.