All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: alistair.francis@wdc.com, bin.meng@windriver.com, qemu-riscv@nongnu.org
Subject: [PATCH v3 04/21] target/riscv: Introduce DisasExtend and new helpers
Date: Wed, 18 Aug 2021 23:04:45 -1000	[thread overview]
Message-ID: <20210819090502.428068-5-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210819090502.428068-1-richard.henderson@linaro.org>

Introduce get_gpr, dest_gpr, temp_new -- new helpers that do not force
tcg globals into temps, returning a constant 0 for $zero as source and
a new temp for $zero as destination.

Introduce ctx->w for simplifying word operations, such as addw.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/riscv/translate.c | 101 ++++++++++++++++++++++++++++++++-------
 1 file changed, 83 insertions(+), 18 deletions(-)

diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 5ceeb28eee..3c20909277 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -39,15 +39,25 @@ static TCGv load_val;
 
 #include "exec/gen-icount.h"
 
+/*
+ * If an operation is being performed on less than TARGET_LONG_BITS,
+ * it may require the inputs to be sign- or zero-extended; which will
+ * depend on the exact operation being performed.
+ */
+typedef enum {
+    EXT_NONE,
+    EXT_SIGN,
+    EXT_ZERO,
+} DisasExtend;
+
 typedef struct DisasContext {
     DisasContextBase base;
     /* pc_succ_insn points to the instruction following base.pc_next */
     target_ulong pc_succ_insn;
     target_ulong priv_ver;
-    bool virt_enabled;
+    target_ulong misa;
     uint32_t opcode;
     uint32_t mstatus_fs;
-    target_ulong misa;
     uint32_t mem_idx;
     /* Remember the rounding mode encoded in the previous fp instruction,
        which we have already installed into env->fp_status.  Or -1 for
@@ -55,6 +65,8 @@ typedef struct DisasContext {
        to any system register, which includes CSR_FRM, so we do not have
        to reset this known value.  */
     int frm;
+    bool w;
+    bool virt_enabled;
     bool ext_ifencei;
     bool hlsx;
     /* vector extension */
@@ -64,7 +76,11 @@ typedef struct DisasContext {
     uint16_t vlen;
     uint16_t mlen;
     bool vl_eq_vlmax;
+    uint8_t ntemp;
     CPUState *cs;
+    TCGv zero;
+    /* Space for 3 operands plus 1 extra for address computation. */
+    TCGv temp[4];
 } DisasContext;
 
 static inline bool has_ext(DisasContext *ctx, uint32_t ext)
@@ -172,27 +188,64 @@ static void gen_goto_tb(DisasContext *ctx, int n, target_ulong dest)
     }
 }
 
-/* Wrapper for getting reg values - need to check of reg is zero since
- * cpu_gpr[0] is not actually allocated
+/*
+ * Wrappers for getting reg values.
+ *
+ * The $zero register does not have cpu_gpr[0] allocated -- we supply the
+ * constant zero as a source, and an uninitialized sink as destination.
+ *
+ * Further, we may provide an extension for word operations.
  */
-static void gen_get_gpr(DisasContext *ctx, TCGv t, int reg_num)
+static TCGv temp_new(DisasContext *ctx)
 {
-    if (reg_num == 0) {
-        tcg_gen_movi_tl(t, 0);
-    } else {
-        tcg_gen_mov_tl(t, cpu_gpr[reg_num]);
-    }
+    assert(ctx->ntemp < ARRAY_SIZE(ctx->temp));
+    return ctx->temp[ctx->ntemp++] = tcg_temp_new();
 }
 
-/* Wrapper for setting reg values - need to check of reg is zero since
- * cpu_gpr[0] is not actually allocated. this is more for safety purposes,
- * since we usually avoid calling the OP_TYPE_gen function if we see a write to
- * $zero
- */
-static void gen_set_gpr(DisasContext *ctx, int reg_num_dst, TCGv t)
+static TCGv get_gpr(DisasContext *ctx, int reg_num, DisasExtend ext)
 {
-    if (reg_num_dst != 0) {
-        tcg_gen_mov_tl(cpu_gpr[reg_num_dst], t);
+    TCGv t;
+
+    if (reg_num == 0) {
+        return ctx->zero;
+    }
+
+    switch (ctx->w ? ext : EXT_NONE) {
+    case EXT_NONE:
+        return cpu_gpr[reg_num];
+    case EXT_SIGN:
+        t = temp_new(ctx);
+        tcg_gen_ext32s_tl(t, cpu_gpr[reg_num]);
+        return t;
+    case EXT_ZERO:
+        t = temp_new(ctx);
+        tcg_gen_ext32u_tl(t, cpu_gpr[reg_num]);
+        return t;
+    }
+    g_assert_not_reached();
+}
+
+static void gen_get_gpr(DisasContext *ctx, TCGv t, int reg_num)
+{
+    tcg_gen_mov_tl(t, get_gpr(ctx, reg_num, EXT_NONE));
+}
+
+static TCGv __attribute__((unused)) dest_gpr(DisasContext *ctx, int reg_num)
+{
+    if (reg_num == 0 || ctx->w) {
+        return temp_new(ctx);
+    }
+    return cpu_gpr[reg_num];
+}
+
+static void gen_set_gpr(DisasContext *ctx, int reg_num, TCGv t)
+{
+    if (reg_num != 0) {
+        if (ctx->w) {
+            tcg_gen_ext32s_tl(cpu_gpr[reg_num], t);
+        } else {
+            tcg_gen_mov_tl(cpu_gpr[reg_num], t);
+        }
     }
 }
 
@@ -928,6 +981,11 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
     ctx->mlen = 1 << (ctx->sew  + 3 - ctx->lmul);
     ctx->vl_eq_vlmax = FIELD_EX32(tb_flags, TB_FLAGS, VL_EQ_VLMAX);
     ctx->cs = cs;
+    ctx->w = false;
+    ctx->ntemp = 0;
+    memset(ctx->temp, 0, sizeof(ctx->temp));
+
+    ctx->zero = tcg_constant_tl(0);
 }
 
 static void riscv_tr_tb_start(DisasContextBase *db, CPUState *cpu)
@@ -949,6 +1007,13 @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
 
     decode_opc(env, ctx, opcode16);
     ctx->base.pc_next = ctx->pc_succ_insn;
+    ctx->w = false;
+
+    for (int i = ctx->ntemp - 1; i >= 0; --i) {
+        tcg_temp_free(ctx->temp[i]);
+        ctx->temp[i] = NULL;
+    }
+    ctx->ntemp = 0;
 
     if (ctx->base.is_jmp == DISAS_NEXT) {
         target_ulong page_start;
-- 
2.25.1



WARNING: multiple messages have this Message-ID (diff)
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, bin.meng@windriver.com, alistair.francis@wdc.com
Subject: [PATCH v3 04/21] target/riscv: Introduce DisasExtend and new helpers
Date: Wed, 18 Aug 2021 23:04:45 -1000	[thread overview]
Message-ID: <20210819090502.428068-5-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210819090502.428068-1-richard.henderson@linaro.org>

Introduce get_gpr, dest_gpr, temp_new -- new helpers that do not force
tcg globals into temps, returning a constant 0 for $zero as source and
a new temp for $zero as destination.

Introduce ctx->w for simplifying word operations, such as addw.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/riscv/translate.c | 101 ++++++++++++++++++++++++++++++++-------
 1 file changed, 83 insertions(+), 18 deletions(-)

diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 5ceeb28eee..3c20909277 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -39,15 +39,25 @@ static TCGv load_val;
 
 #include "exec/gen-icount.h"
 
+/*
+ * If an operation is being performed on less than TARGET_LONG_BITS,
+ * it may require the inputs to be sign- or zero-extended; which will
+ * depend on the exact operation being performed.
+ */
+typedef enum {
+    EXT_NONE,
+    EXT_SIGN,
+    EXT_ZERO,
+} DisasExtend;
+
 typedef struct DisasContext {
     DisasContextBase base;
     /* pc_succ_insn points to the instruction following base.pc_next */
     target_ulong pc_succ_insn;
     target_ulong priv_ver;
-    bool virt_enabled;
+    target_ulong misa;
     uint32_t opcode;
     uint32_t mstatus_fs;
-    target_ulong misa;
     uint32_t mem_idx;
     /* Remember the rounding mode encoded in the previous fp instruction,
        which we have already installed into env->fp_status.  Or -1 for
@@ -55,6 +65,8 @@ typedef struct DisasContext {
        to any system register, which includes CSR_FRM, so we do not have
        to reset this known value.  */
     int frm;
+    bool w;
+    bool virt_enabled;
     bool ext_ifencei;
     bool hlsx;
     /* vector extension */
@@ -64,7 +76,11 @@ typedef struct DisasContext {
     uint16_t vlen;
     uint16_t mlen;
     bool vl_eq_vlmax;
+    uint8_t ntemp;
     CPUState *cs;
+    TCGv zero;
+    /* Space for 3 operands plus 1 extra for address computation. */
+    TCGv temp[4];
 } DisasContext;
 
 static inline bool has_ext(DisasContext *ctx, uint32_t ext)
@@ -172,27 +188,64 @@ static void gen_goto_tb(DisasContext *ctx, int n, target_ulong dest)
     }
 }
 
-/* Wrapper for getting reg values - need to check of reg is zero since
- * cpu_gpr[0] is not actually allocated
+/*
+ * Wrappers for getting reg values.
+ *
+ * The $zero register does not have cpu_gpr[0] allocated -- we supply the
+ * constant zero as a source, and an uninitialized sink as destination.
+ *
+ * Further, we may provide an extension for word operations.
  */
-static void gen_get_gpr(DisasContext *ctx, TCGv t, int reg_num)
+static TCGv temp_new(DisasContext *ctx)
 {
-    if (reg_num == 0) {
-        tcg_gen_movi_tl(t, 0);
-    } else {
-        tcg_gen_mov_tl(t, cpu_gpr[reg_num]);
-    }
+    assert(ctx->ntemp < ARRAY_SIZE(ctx->temp));
+    return ctx->temp[ctx->ntemp++] = tcg_temp_new();
 }
 
-/* Wrapper for setting reg values - need to check of reg is zero since
- * cpu_gpr[0] is not actually allocated. this is more for safety purposes,
- * since we usually avoid calling the OP_TYPE_gen function if we see a write to
- * $zero
- */
-static void gen_set_gpr(DisasContext *ctx, int reg_num_dst, TCGv t)
+static TCGv get_gpr(DisasContext *ctx, int reg_num, DisasExtend ext)
 {
-    if (reg_num_dst != 0) {
-        tcg_gen_mov_tl(cpu_gpr[reg_num_dst], t);
+    TCGv t;
+
+    if (reg_num == 0) {
+        return ctx->zero;
+    }
+
+    switch (ctx->w ? ext : EXT_NONE) {
+    case EXT_NONE:
+        return cpu_gpr[reg_num];
+    case EXT_SIGN:
+        t = temp_new(ctx);
+        tcg_gen_ext32s_tl(t, cpu_gpr[reg_num]);
+        return t;
+    case EXT_ZERO:
+        t = temp_new(ctx);
+        tcg_gen_ext32u_tl(t, cpu_gpr[reg_num]);
+        return t;
+    }
+    g_assert_not_reached();
+}
+
+static void gen_get_gpr(DisasContext *ctx, TCGv t, int reg_num)
+{
+    tcg_gen_mov_tl(t, get_gpr(ctx, reg_num, EXT_NONE));
+}
+
+static TCGv __attribute__((unused)) dest_gpr(DisasContext *ctx, int reg_num)
+{
+    if (reg_num == 0 || ctx->w) {
+        return temp_new(ctx);
+    }
+    return cpu_gpr[reg_num];
+}
+
+static void gen_set_gpr(DisasContext *ctx, int reg_num, TCGv t)
+{
+    if (reg_num != 0) {
+        if (ctx->w) {
+            tcg_gen_ext32s_tl(cpu_gpr[reg_num], t);
+        } else {
+            tcg_gen_mov_tl(cpu_gpr[reg_num], t);
+        }
     }
 }
 
@@ -928,6 +981,11 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
     ctx->mlen = 1 << (ctx->sew  + 3 - ctx->lmul);
     ctx->vl_eq_vlmax = FIELD_EX32(tb_flags, TB_FLAGS, VL_EQ_VLMAX);
     ctx->cs = cs;
+    ctx->w = false;
+    ctx->ntemp = 0;
+    memset(ctx->temp, 0, sizeof(ctx->temp));
+
+    ctx->zero = tcg_constant_tl(0);
 }
 
 static void riscv_tr_tb_start(DisasContextBase *db, CPUState *cpu)
@@ -949,6 +1007,13 @@ static void riscv_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu)
 
     decode_opc(env, ctx, opcode16);
     ctx->base.pc_next = ctx->pc_succ_insn;
+    ctx->w = false;
+
+    for (int i = ctx->ntemp - 1; i >= 0; --i) {
+        tcg_temp_free(ctx->temp[i]);
+        ctx->temp[i] = NULL;
+    }
+    ctx->ntemp = 0;
 
     if (ctx->base.is_jmp == DISAS_NEXT) {
         target_ulong page_start;
-- 
2.25.1



  parent reply	other threads:[~2021-08-19  9:07 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19  9:04 [PATCH v3 00/21] target/riscv: Use tcg_constant_* Richard Henderson
2021-08-19  9:04 ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 01/21] " Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 02/21] target/riscv: Clean up division helpers Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19 11:00   ` Bin Meng
2021-08-19 11:00     ` Bin Meng
2021-08-19 17:23     ` Richard Henderson
2021-08-19 17:23       ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 03/21] target/riscv: Add DisasContext to gen_get_gpr, gen_set_gpr Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` Richard Henderson [this message]
2021-08-19  9:04   ` [PATCH v3 04/21] target/riscv: Introduce DisasExtend and new helpers Richard Henderson
2021-08-19 11:01   ` Bin Meng
2021-08-19 11:01     ` Bin Meng
2021-08-19  9:04 ` [PATCH v3 05/21] target/riscv: Add DisasExtend to gen_arith* Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 06/21] target/riscv: Remove gen_arith_div* Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 07/21] target/riscv: Use gen_arith for mulh and mulhu Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 08/21] target/riscv: Move gen_* helpers for RVM Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-20  1:35   ` Alistair Francis
2021-08-20  1:35     ` Alistair Francis
2021-08-19  9:04 ` [PATCH v3 09/21] target/riscv: Move gen_* helpers for RVB Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 10/21] target/riscv: Add DisasExtend to gen_unary Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 11/21] target/riscv: Use DisasExtend in shift operations Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 12/21] target/riscv: Add gen_greviw Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 13/21] target/riscv: Use get_gpr in branches Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 14/21] target/riscv: Use {get, dest}_gpr for integer load/store Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 15/21] target/riscv: Reorg csr instructions Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 16/21] target/riscv: Use {get,dest}_gpr for RVA Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 17/21] target/riscv: Use gen_shift_imm_fn for slli_uw Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:04 ` [PATCH v3 18/21] target/riscv: Use {get,dest}_gpr for RVF Richard Henderson
2021-08-19  9:04   ` Richard Henderson
2021-08-19  9:05 ` [PATCH v3 19/21] target/riscv: Use {get,dest}_gpr for RVD Richard Henderson
2021-08-19  9:05   ` Richard Henderson
2021-08-19  9:05 ` [PATCH v3 20/21] target/riscv: Tidy trans_rvh.c.inc Richard Henderson
2021-08-19  9:05   ` Richard Henderson
2021-08-19  9:05 ` [PATCH v3 21/21] target/riscv: Use {get,dest}_gpr for RVV Richard Henderson
2021-08-19  9:05   ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210819090502.428068-5-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=alistair.francis@wdc.com \
    --cc=bin.meng@windriver.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.