All of lore.kernel.org
 help / color / mirror / Atom feed
From: Billy Tsai <billy_tsai@aspeedtech.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>,
	<robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>,
	<p.zabel@pengutronix.de>, <lgirdwood@gmail.com>,
	<broonie@kernel.org>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset.
Date: Tue, 24 Aug 2021 17:12:37 +0800	[thread overview]
Message-ID: <202108250008.17P085Ci097521@twspam01.aspeedtech.com> (raw)
In-Reply-To: <20210824091243.9393-1-billy_tsai@aspeedtech.com>

This patch use devm_add_action_or_reset to handle the error in probe
phase.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 92 +++++++++++++++++++++---------------
 1 file changed, 55 insertions(+), 37 deletions(-)

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 52db38be9699..1c87e12a0cab 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -187,6 +187,27 @@ static const struct iio_info aspeed_adc_iio_info = {
 	.debugfs_reg_access = aspeed_adc_reg_access,
 };
 
+static void aspeed_adc_unregister_divider(void *data)
+{
+	struct clk_hw *clk = data;
+
+	clk_hw_unregister_divider(clk);
+}
+
+static void aspeed_adc_reset_assert(void *data)
+{
+	struct reset_control *rst = data;
+
+	reset_control_assert(rst);
+}
+
+static void aspeed_adc_clk_disable_unprepare(void *data)
+{
+	struct clk *clk = data;
+
+	clk_disable_unprepare(clk);
+}
+
 static int aspeed_adc_vref_config(struct iio_dev *indio_dev)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
@@ -232,6 +253,12 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 			&data->clk_lock);
 		if (IS_ERR(data->clk_prescaler))
 			return PTR_ERR(data->clk_prescaler);
+
+		ret = devm_add_action_or_reset(data->dev,
+					       aspeed_adc_unregister_divider,
+					       data->clk_prescaler);
+		if (ret)
+			return ret;
 		snprintf(clk_parent_name, 32, clk_name);
 		scaler_flags = CLK_SET_RATE_PARENT;
 	}
@@ -244,23 +271,30 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 		&pdev->dev, clk_name, clk_parent_name, scaler_flags,
 		data->base + ASPEED_REG_CLOCK_CONTROL, 0,
 		data->model_data->scaler_bit_width, 0, &data->clk_lock);
-	if (IS_ERR(data->clk_scaler)) {
-		ret = PTR_ERR(data->clk_scaler);
-		goto scaler_error;
-	}
+	if (IS_ERR(data->clk_scaler))
+		return PTR_ERR(data->clk_scaler);
+
+	ret = devm_add_action_or_reset(data->dev, aspeed_adc_unregister_divider,
+				       data->clk_scaler);
+	if (ret)
+		return ret;
 
 	data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(data->rst)) {
 		dev_err(&pdev->dev,
 			"invalid or missing reset controller device tree entry");
-		ret = PTR_ERR(data->rst);
-		goto reset_error;
+		return PTR_ERR(data->rst);
 	}
 	reset_control_deassert(data->rst);
 
+	ret = devm_add_action_or_reset(data->dev, aspeed_adc_reset_assert,
+				       data->rst);
+	if (ret)
+		return ret;
+
 	ret = aspeed_adc_vref_config(indio_dev);
 	if (ret)
-		goto vref_config_error;
+		return ret;
 
 	if (data->model_data->wait_init_sequence) {
 		/* Enable engine in normal mode. */
@@ -277,13 +311,19 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 					 ASPEED_ADC_INIT_POLLING_TIME,
 					 ASPEED_ADC_INIT_TIMEOUT);
 		if (ret)
-			goto poll_timeout_error;
+			return ret;
 	}
 
 	/* Start all channels in normal mode. */
 	ret = clk_prepare_enable(data->clk_scaler->clk);
 	if (ret)
-		goto clk_enable_error;
+		return ret;
+
+	ret = devm_add_action_or_reset(data->dev,
+				       aspeed_adc_clk_disable_unprepare,
+				       data->clk_scaler->clk);
+	if (ret)
+		return ret;
 
 	adc_engine_control_reg_val =
 		ASPEED_ADC_CTRL_CHANNEL |
@@ -299,41 +339,19 @@ static int aspeed_adc_probe(struct platform_device *pdev)
 	indio_dev->num_channels = data->model_data->num_channels;
 
 	ret = iio_device_register(indio_dev);
-	if (ret)
-		goto iio_register_error;
-
+	if (ret) {
+		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
+				  ASPEED_ADC_OP_MODE_PWR_DOWN),
+		       data->base + ASPEED_REG_ENGINE_CONTROL);
+		return ret;
+	}
 	return 0;
-
-iio_register_error:
-	writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
-	       data->base + ASPEED_REG_ENGINE_CONTROL);
-	clk_disable_unprepare(data->clk_scaler->clk);
-clk_enable_error:
-poll_timeout_error:
-vref_config_error:
-	reset_control_assert(data->rst);
-reset_error:
-	clk_hw_unregister_divider(data->clk_scaler);
-scaler_error:
-	if (data->model_data->need_prescaler)
-		clk_hw_unregister_divider(data->clk_prescaler);
-	return ret;
 }
 
 static int aspeed_adc_remove(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct aspeed_adc_data *data = iio_priv(indio_dev);
-
 	iio_device_unregister(indio_dev);
-	writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
-	       data->base + ASPEED_REG_ENGINE_CONTROL);
-	clk_disable_unprepare(data->clk_scaler->clk);
-	reset_control_assert(data->rst);
-	clk_hw_unregister_divider(data->clk_scaler);
-	if (data->model_data->need_prescaler)
-		clk_hw_unregister_divider(data->clk_prescaler);
-
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-08-25  2:58 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-24  9:12 [RESEND v4 00/15] Add support for ast2600 ADC Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 02/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-29 15:07   ` Jonathan Cameron
2021-08-29 15:07     ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-29 15:08   ` Jonathan Cameron
2021-08-29 15:08     ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 05/15] iio: adc: aspeed: Refactory model data structure Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-29 15:13   ` Jonathan Cameron
2021-08-29 15:13     ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 06/15] iio: adc: aspeed: Add vref config function Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai
2021-08-25 11:52   ` kernel test robot
2021-08-25 11:52     ` kernel test robot
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai [this message]
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 10/15] iio: adc: aspeed: Support ast2600 adc Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-29 15:31   ` Jonathan Cameron
2021-08-29 15:31     ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai
2021-08-24  9:12   ` Billy Tsai
2021-08-29 15:33   ` Jonathan Cameron
2021-08-29 15:33     ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-29 15:36   ` Jonathan Cameron
2021-08-29 15:36     ` Jonathan Cameron
2021-08-30  8:35     ` Billy Tsai
2021-08-30  8:35       ` Billy Tsai
2021-08-30  9:52       ` Jonathan Cameron
2021-08-30  9:52         ` Jonathan Cameron
2021-08-24  9:12 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-29 15:43   ` Jonathan Cameron
2021-08-29 15:43     ` Jonathan Cameron
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
2021-08-24  9:12 ` Billy Tsai
     [not found] ` <202108250006.17P06IgG097015@twspam01.aspeedtech.com>
2021-08-29 15:20   ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Jonathan Cameron
2021-08-29 15:20     ` Jonathan Cameron
     [not found] ` <202108250004.17P04FdD094082@twspam01.aspeedtech.com>
2021-08-29 15:25   ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Jonathan Cameron
2021-08-29 15:25     ` Jonathan Cameron
     [not found] ` <202108250006.17P066YP096721@twspam01.aspeedtech.com>
2021-08-29 15:39   ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Jonathan Cameron
2021-08-29 15:39     ` Jonathan Cameron
     [not found] ` <202108250007.17P07NFj097422@twspam01.aspeedtech.com>
2021-08-29 15:45   ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Jonathan Cameron
2021-08-29 15:45     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202108250008.17P085Ci097521@twspam01.aspeedtech.com \
    --to=billy_tsai@aspeedtech.com \
    --cc=BMC-SW@aspeedtech.com \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=joel@jms.id.au \
    --cc=lars@metafoo.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.