From: Billy Tsai <billy_tsai@aspeedtech.com> To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>, <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <p.zabel@pengutronix.de>, <lgirdwood@gmail.com>, <broonie@kernel.org>, <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Cc: <BMC-SW@aspeedtech.com> Subject: [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Date: Tue, 24 Aug 2021 17:12:29 +0800 [thread overview] Message-ID: <20210824091243.9393-2-billy_tsai@aspeedtech.com> (raw) In-Reply-To: <20210824091243.9393-1-billy_tsai@aspeedtech.com> Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml new file mode 100644 index 000000000000..248cda7d91e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + • 10-bits resolution for 16 voltage channels. + • The device split into two individual engine and each contains 8 voltage + channels. + • Channel scanning can be non-continuous. + • Programmable ADC clock frequency. + • Programmable upper and lower threshold for each channels. + • Interrupt when larger or less than threshold for each channels. + • Support hysteresis for each channels. + • Built-in a compensating method. + • Built-in a register to trim internal reference voltage. + • Internal or External reference voltage. + • Support 2 Internal reference voltage 1.2v or 2.5v. + • Integrate dividing circuit for battery sensing. + +properties: + compatible: + enum: + - aspeed,ast2600-adc0 + - aspeed,ast2600-adc1 + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vref-supply: + description: + The external regulator supply ADC reference voltage. + + aspeed,int_vref_mv: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1200, 2500] + description: + ADC internal reference voltage in millivolts. + + aspeed,battery-sensing: + type: boolean + description: + Inform the driver that last channel will be used to sensor battery. + + aspeed,trim-data-valid: + type: boolean + description: | + The ADC reference voltage can be calibrated to obtain the trimming + data which will be stored in otp. This property informs the driver that + the data store in the otp is valid. + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; +... -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Billy Tsai <billy_tsai@aspeedtech.com> To: <jic23@kernel.org>, <lars@metafoo.de>, <pmeerw@pmeerw.net>, <robh+dt@kernel.org>, <joel@jms.id.au>, <andrew@aj.id.au>, <p.zabel@pengutronix.de>, <lgirdwood@gmail.com>, <broonie@kernel.org>, <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org> Cc: <BMC-SW@aspeedtech.com> Subject: [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Date: Tue, 24 Aug 2021 17:12:29 +0800 [thread overview] Message-ID: <20210824091243.9393-2-billy_tsai@aspeedtech.com> (raw) In-Reply-To: <20210824091243.9393-1-billy_tsai@aspeedtech.com> Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml new file mode 100644 index 000000000000..248cda7d91e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + • 10-bits resolution for 16 voltage channels. + • The device split into two individual engine and each contains 8 voltage + channels. + • Channel scanning can be non-continuous. + • Programmable ADC clock frequency. + • Programmable upper and lower threshold for each channels. + • Interrupt when larger or less than threshold for each channels. + • Support hysteresis for each channels. + • Built-in a compensating method. + • Built-in a register to trim internal reference voltage. + • Internal or External reference voltage. + • Support 2 Internal reference voltage 1.2v or 2.5v. + • Integrate dividing circuit for battery sensing. + +properties: + compatible: + enum: + - aspeed,ast2600-adc0 + - aspeed,ast2600-adc1 + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vref-supply: + description: + The external regulator supply ADC reference voltage. + + aspeed,int_vref_mv: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1200, 2500] + description: + ADC internal reference voltage in millivolts. + + aspeed,battery-sensing: + type: boolean + description: + Inform the driver that last channel will be used to sensor battery. + + aspeed,trim-data-valid: + type: boolean + description: | + The ADC reference voltage can be calibrated to obtain the trimming + data which will be stored in otp. This property informs the driver that + the data store in the otp is valid. + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; +... -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-24 9:15 UTC|newest] Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-24 9:12 [RESEND v4 00/15] Add support for ast2600 ADC Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai [this message] 2021-08-24 9:12 ` [RESEND v4 01/15] dt-bindings: iio: adc: Add ast2600-adc bindings Billy Tsai 2021-08-24 9:12 ` [RESEND v4 02/15] iio: adc: aspeed: completes the bitfield declare Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:07 ` Jonathan Cameron 2021-08-29 15:07 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 03/15] iio: adc: aspeed: set driver data when adc probe Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:08 ` Jonathan Cameron 2021-08-29 15:08 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 04/15] iio: adc: aspeed: Keep model data to driver data Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 05/15] iio: adc: aspeed: Refactory model data structure Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:13 ` Jonathan Cameron 2021-08-29 15:13 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 06/15] iio: adc: aspeed: Add vref config function Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 07/15] iio: adc: aspeed: Set num_channels with model data Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Billy Tsai 2021-08-25 11:52 ` kernel test robot 2021-08-25 11:52 ` kernel test robot 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 10/15] iio: adc: aspeed: Support ast2600 adc Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:31 ` Jonathan Cameron 2021-08-29 15:31 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 11/15] iio: adc: aspeed: Fix the calculate error of clock Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:33 ` Jonathan Cameron 2021-08-29 15:33 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 12/15] iio: adc: aspeed: Add func to set sampling rate Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:36 ` Jonathan Cameron 2021-08-29 15:36 ` Jonathan Cameron 2021-08-30 8:35 ` Billy Tsai 2021-08-30 8:35 ` Billy Tsai 2021-08-30 9:52 ` Jonathan Cameron 2021-08-30 9:52 ` Jonathan Cameron 2021-08-24 9:12 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 14/15] iio: adc: aspeed: Support battery sensing Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-29 15:43 ` Jonathan Cameron 2021-08-29 15:43 ` Jonathan Cameron 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai 2021-08-24 9:12 ` Billy Tsai [not found] ` <202108250006.17P06IgG097015@twspam01.aspeedtech.com> 2021-08-29 15:20 ` [RESEND v4 08/15] iio: adc: aspeed: Use model_data to set clk scaler Jonathan Cameron 2021-08-29 15:20 ` Jonathan Cameron [not found] ` <202108250004.17P04FdD094082@twspam01.aspeedtech.com> 2021-08-29 15:25 ` [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset Jonathan Cameron 2021-08-29 15:25 ` Jonathan Cameron [not found] ` <202108250006.17P066YP096721@twspam01.aspeedtech.com> 2021-08-29 15:39 ` [RESEND v4 13/15] iio: adc: aspeed: Add compensation phase Jonathan Cameron 2021-08-29 15:39 ` Jonathan Cameron [not found] ` <202108250007.17P07NFj097422@twspam01.aspeedtech.com> 2021-08-29 15:45 ` [RESEND v4 15/15] iio: adc: aspeed: Get and set trimming data Jonathan Cameron 2021-08-29 15:45 ` Jonathan Cameron
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210824091243.9393-2-billy_tsai@aspeedtech.com \ --to=billy_tsai@aspeedtech.com \ --cc=BMC-SW@aspeedtech.com \ --cc=andrew@aj.id.au \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=jic23@kernel.org \ --cc=joel@jms.id.au \ --cc=lars@metafoo.de \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=pmeerw@pmeerw.net \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.