[PATCH v2 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts

[PATCH v2 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts

[Matthew Hagan]

This board was previously added to
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
however the dts file was not updated to reflect this change. This patch
corrects bcm958623hr.dts by adding the board name to the compatible.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm958623hr.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 80556882951f..c06871915a1c 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-- 
2.27.0

[PATCH v2 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts

[Matthew Hagan]

This board was previously added to
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
however the dts file was not updated to reflect this change. This patch
corrects bcm958623hr.dts by adding the board name to the compatible.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm958623hr.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 80556882951f..c06871915a1c 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/5] ARM: dts: NSP: Fix mpcore, mmc node names

[Matthew Hagan]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 745d1d9d7414..6f2ccd059e73 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@ pmu {
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@ dma: dma@20000 {
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.27.0

[PATCH v2 2/5] ARM: dts: NSP: Fix mpcore, mmc node names

[Matthew Hagan]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 745d1d9d7414..6f2ccd059e73 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@ pmu {
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@ dma: dma@20000 {
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/5] ARM: dts: NSP: Fix mpcore, mmc node names

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:48 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> Running dtbs_check yielded the issues with bcm-nsp.dtsi.
> 
> Firstly this patch fixes the following message by appending "-bus" to
> the mpcore node name:
> mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> Secondly mmc node name. The label name can remain as is.
> sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Re: [PATCH v2 2/5] ARM: dts: NSP: Fix mpcore, mmc node names

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:48 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> Running dtbs_check yielded the issues with bcm-nsp.dtsi.
> 
> Firstly this patch fixes the following message by appending "-bus" to
> the mpcore node name:
> mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> Secondly mmc node name. The label name can remain as is.
> sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Matthew Hagan]

While functional, the mdio-mux-mmioreg binding does not conform to
Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
mdio-mux compatible is also required. Without this the following output
is observed when running dtbs_check:

mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short

This change brings conformance to this requirement and corresponds
likewise to Rafal Milecki's change to the BCM5301x platform[1].

[1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6f2ccd059e73..180827500f25 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -371,7 +371,7 @@ mdio: mdio@32000 {
 		};
 
 		mdio-mux@32000 {
-			compatible = "mdio-mux-mmioreg";
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			reg = <0x32000 0x4>;
 			mux-mask = <0x200>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 8860f2fefc63..57d0c5eb9749 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -72,7 +72,7 @@ led-5 {
 	};
 
 	mdio-mii-mux {
-		compatible = "mdio-mux-mmioreg";
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		reg = <0x1803f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
-- 
2.27.0

[PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Matthew Hagan]

While functional, the mdio-mux-mmioreg binding does not conform to
Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
mdio-mux compatible is also required. Without this the following output
is observed when running dtbs_check:

mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short

This change brings conformance to this requirement and corresponds
likewise to Rafal Milecki's change to the BCM5301x platform[1].

[1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6f2ccd059e73..180827500f25 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -371,7 +371,7 @@ mdio: mdio@32000 {
 		};
 
 		mdio-mux@32000 {
-			compatible = "mdio-mux-mmioreg";
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			reg = <0x32000 0x4>;
 			mux-mask = <0x200>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 8860f2fefc63..57d0c5eb9749 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -72,7 +72,7 @@ led-5 {
 	};
 
 	mdio-mii-mux {
-		compatible = "mdio-mux-mmioreg";
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		reg = <0x1803f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Andrew Lunn]

On Sun, Aug 29, 2021 at 10:37:49PM +0000, Matthew Hagan wrote:
> While functional, the mdio-mux-mmioreg binding does not conform to
> Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
> mdio-mux compatible is also required. Without this the following output
> is observed when running dtbs_check:
> 
> mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short
> 
> This change brings conformance to this requirement and corresponds
> likewise to Rafal Milecki's change to the BCM5301x platform[1].
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>

Thanks for the expanded commit message.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Andrew Lunn]

On Sun, Aug 29, 2021 at 10:37:49PM +0000, Matthew Hagan wrote:
> While functional, the mdio-mux-mmioreg binding does not conform to
> Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
> mdio-mux compatible is also required. Without this the following output
> is observed when running dtbs_check:
> 
> mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short
> 
> This change brings conformance to this requirement and corresponds
> likewise to Rafal Milecki's change to the BCM5301x platform[1].
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>

Thanks for the expanded commit message.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:49 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> While functional, the mdio-mux-mmioreg binding does not conform to
> Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
> mdio-mux compatible is also required. Without this the following output
> is observed when running dtbs_check:
> 
> mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short
> 
> This change brings conformance to this requirement and corresponds
> likewise to Rafal Milecki's change to the BCM5301x platform[1].
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Re: [PATCH v2 3/5] ARM: dts: NSP: Fix MDIO mux node names

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:49 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> While functional, the mdio-mux-mmioreg binding does not conform to
> Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml in that an
> mdio-mux compatible is also required. Without this the following output
> is observed when running dtbs_check:
> 
> mdio-mux@32000: compatible: ['mdio-mux-mmioreg'] is too short
> 
> This change brings conformance to this requirement and corresponds
> likewise to Rafal Milecki's change to the BCM5301x platform[1].
> 
> [1] https://lore.kernel.org/linux-arm-kernel/20210822191256.3715003-1-f.fainelli@gmail.com/T/
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name

[Matthew Hagan]

Running dtbs_check yields the following message when checking the
MX64/MX65 devicetree:
at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'

This patch fixes the issue by renaming the at24 node appropriately.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index bcdd38954f1d..6519b7c61af1 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -48,7 +48,7 @@ &ehci0 {
 &i2c0 {
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
-- 
2.27.0

[PATCH v2 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name

[Matthew Hagan]

Running dtbs_check yields the following message when checking the
MX64/MX65 devicetree:
at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'

This patch fixes the issue by renaming the at24 node appropriately.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index bcdd38954f1d..6519b7c61af1 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -48,7 +48,7 @@ &ehci0 {
 &i2c0 {
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:50 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> Running dtbs_check yields the following message when checking the
> MX64/MX65 devicetree:
> at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'
> 
> This patch fixes the issue by renaming the at24 node appropriately.
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Re: [PATCH v2 4/5] ARM: dts: NSP: Fix MX64/MX65 eeprom node name

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:50 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> Running dtbs_check yields the following message when checking the
> MX64/MX65 devicetree:
> at24@50: $nodename:0: 'at24@50' does not match '^eeprom@[0-9a-f]{1,2}$'
> 
> This patch fixes the issue by renaming the at24 node appropriately.
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings

[Matthew Hagan]

The naming of this node is based upon that of the initial EA9500 dts[1].
However this does not conform with the mdio-mux format, yielding the
following message when running dtbs_check:
mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'

Secondly, this node should be moved to within the axi node and given the
appropriate unit address. This also requires exposing the axi node via a
label in bcm-nsp.dtsi. This fixes the following warning:
Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name

[1]https://patchwork.ozlabs.org/project/linux-imx/patch/20180618174159.86150-1-npcomplete13@gmail.com/#1941353

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 180827500f25..1c08daa18858 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -166,7 +166,7 @@ periph_clk: periph_clk {
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 57d0c5eb9749..102acd85fab2 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -70,10 +70,12 @@ led-5 {
 			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	mdio-mii-mux {
+&axi {
+	mdio-mux@3f1c0 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		reg = <0x1803f1c0 0x4>;
+		reg = <0x3f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
 		#address-cells = <1>;
-- 
2.27.0

[PATCH v2 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings

[Matthew Hagan]

The naming of this node is based upon that of the initial EA9500 dts[1].
However this does not conform with the mdio-mux format, yielding the
following message when running dtbs_check:
mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'

Secondly, this node should be moved to within the axi node and given the
appropriate unit address. This also requires exposing the axi node via a
label in bcm-nsp.dtsi. This fixes the following warning:
Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name

[1]https://patchwork.ozlabs.org/project/linux-imx/patch/20180618174159.86150-1-npcomplete13@gmail.com/#1941353

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi                | 2 +-
 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 6 ++++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 180827500f25..1c08daa18858 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -166,7 +166,7 @@ periph_clk: periph_clk {
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index 57d0c5eb9749..102acd85fab2 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -70,10 +70,12 @@ led-5 {
 			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	mdio-mii-mux {
+&axi {
+	mdio-mux@3f1c0 {
 		compatible = "mdio-mux-mmioreg", "mdio-mux";
-		reg = <0x1803f1c0 0x4>;
+		reg = <0x3f1c0 0x4>;
 		mux-mask = <0x2000>;
 		mdio-parent-bus = <&mdio_ext>;
 		#address-cells = <1>;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:51 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> The naming of this node is based upon that of the initial EA9500 dts[1].
> However this does not conform with the mdio-mux format, yielding the
> following message when running dtbs_check:
> mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'
> 
> Secondly, this node should be moved to within the axi node and given the
> appropriate unit address. This also requires exposing the axi node via a
> label in bcm-nsp.dtsi. This fixes the following warning:
> Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name
> 
> [1]https://patchwork.ozlabs.org/project/linux-imx/patch/20180618174159.86150-1-npcomplete13@gmail.com/#1941353
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Re: [PATCH v2 5/5] ARM: dts: NSP: Fix MX65 MDIO mux warnings

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:51 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> The naming of this node is based upon that of the initial EA9500 dts[1].
> However this does not conform with the mdio-mux format, yielding the
> following message when running dtbs_check:
> mdio-mii-mux: $nodename:0: 'mdio-mii-mux' does not match '^mdio-mux[\\-@]?'
> 
> Secondly, this node should be moved to within the axi node and given the
> appropriate unit address. This also requires exposing the axi node via a
> label in bcm-nsp.dtsi. This fixes the following warning:
> Warning (unit_address_vs_reg): /mdio-mii-mux: node has a reg or ranges property, but no unit name
> 
> [1]https://patchwork.ozlabs.org/project/linux-imx/patch/20180618174159.86150-1-npcomplete13@gmail.com/#1941353
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:47 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> This board was previously added to
> Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
> however the dts file was not updated to reflect this change. This patch
> corrects bcm958623hr.dts by adding the board name to the compatible.
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

Re: [PATCH v2 1/5] ARM: dts: NSP: Add bcm958623hr board name to dts

[Florian Fainelli]

On Sun, 29 Aug 2021 22:37:47 +0000, Matthew Hagan <mnhagan88@gmail.com> wrote:
> This board was previously added to
> Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
> however the dts file was not updated to reflect this change. This patch
> corrects bcm958623hr.dts by adding the board name to the compatible.
> 
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel