All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH bpf-next v2 00/13] bpfilter
@ 2021-08-29 18:35 Dmitrii Banshchikov
  2021-08-29 18:35 ` [PATCH bpf-next v2 01/13] bpfilter: Add types for usermode helper Dmitrii Banshchikov
                   ` (14 more replies)
  0 siblings, 15 replies; 24+ messages in thread
From: Dmitrii Banshchikov @ 2021-08-29 18:35 UTC (permalink / raw)
  To: bpf
  Cc: Dmitrii Banshchikov, ast, davem, daniel, andrii, kafai,
	songliubraving, yhs, john.fastabend, kpsingh, netdev, rdna

The patchset is based on the patches from David S. Miller [1] and
Daniel Borkmann [2].

The main goal of the patchset is to prepare bpfilter for
iptables' configuration blob parsing and code generation.

The patchset introduces data structures and code for matches,
targets, rules and tables. Beside that the code generation
is introduced.

The first version of the code generation supports only "inline"
mode - all chains and their rules emit instructions in linear
approach. The plan for the code generation is to introduce a
bpf_map_for_each subprogram that will handle all rules that
aren't generated in inline mode due to verifier's limit. This
shall allow to handle arbitrary large rule sets.

Things that are not implemented yet:
  1) The process of switching from the previous BPF programs to the
     new set isn't atomic.
  2) The code generation for FORWARD chain isn't supported
  3) Counters setsockopts() are not handled
  4) No support of device ifindex - it's hardcoded
  5) No helper subprog for counters update

Another problem is using iptables' blobs for tests and filter
table initialization. While it saves lines something more
maintainable should be done here.

The plan for the next iteration:
  1) Handle large rule sets via bpf_map_for_each
  2) Add a helper program for counters update
  3) Handle iptables' counters setsockopts()
  4) Handle ifindex
  5) Add TCP match

Patch 1 adds definitions of the used types.
Patch 2 adds logging to bpfilter.
Patch 3 adds bpfilter header to tools
Patch 4 adds an associative map.
Patch 5 adds code generation basis
Patches 6/7/8/9 add code for matches, targets, rules and table.
Patch 10 adds code generation for table
Patch 11 handles hooked setsockopt(2) calls.
Patch 12 adds filter table
Patch 13 uses prepared code in main().

And here are some performance tests.

The environment consists of two machines(sender and receiver)
connected with 10Gbps link via switch.  The sender uses DPDK to
simulate QUIC packets(89 bytes long) from random IP. The switch
measures the generated traffic to be about 7066377568 bits/sec,
9706553 packets/sec.

The receiver is a 2 socket 2680v3 + HT and uses either iptables,
nft or bpfilter to filter out UDP traffic.

Two tests were made. Two rulesets(default policy was to ACCEPT)
were used in each test:

```
iptables -A INPUT -p udp -m udp --dport 1500 -j DROP
```
and
```
iptables -A INPUT -s 1.1.1.1/32 -p udp -m udp --dport 1000 -j DROP
iptables -A INPUT -s 2.2.2.2/32 -p udp -m udp --dport 2000 -j DROP
...
iptables -A INPUT -s 31.31.31.31/32 -p udp -m udp --dport 31000 -j DROP
iptables -A INPUT -p udp -m udp --dport 1500 -j DROP
```

The first test measures performance of the receiver via stress-ng
[3] in bogo-ops. The upper-bound(there are no firewall and no
traffic) value for bogo-ops is 8148-8210. The lower bound value
(there is traffic but no firewall) is 6567-6643.
The stress-ng command used: stress-ng -t60 -c48 --metrics-brief.

The second test measures the number the of dropped packets. The
receiver keeps only 1 CPU online and disables all
others(maxcpus=1 and set number of cores per socket to 1 in
BIOS). The number of the dropped packets is collected via
iptables-legacy -nvL, iptables -nvL and bpftool map dump id.

Test 1: bogo-ops(the more the better)
            iptables            nft        bpfilter
  1 rule:  6474-6554      6483-6515       7996-8008
32 rules:  6374-6433      5761-5804       7997-8042


Test 2: number of dropped packets(the more the better)
            iptables            nft         bpfilter
  1 rule:  234M-241M           220M            900M+
32 rules:  186M-196M        97M-98M            900M+


Please let me know if you see a gap in the testing environment.

v1 -> v2
Maps:
  * Use map_upsert instead of separate map_insert and map_update
Matches:
  * Add a new virtual call - gen_inline. The call is used for
  * inline generating of a rule's match.
Targets:
  * Add a new virtual call - gen_inline. The call is used for inline
    generating of a rule's target.
Rules:
  * Add code generation for rules
Table:
  * Add struct table_ops
  * Add map for table_ops
  * Add filter table
  * Reorganize the way filter table is initialized
Sockopts:
  * Install/uninstall BPF programs while handling
    IPT_SO_SET_REPLACE
Code generation:
  * Add first version of the code generation
Dependencies:
  * Add libbpf

v0 -> v1
IO:
  * Use ssize_t in pvm_read, pvm_write for total_bytes
  * Move IO functions into sockopt.c and main.c
Logging:
  * Use LOGLEVEL_EMERG, LOGLEVEL_NOTICE, LOGLEVE_DEBUG
    while logging to /dev/kmsg
  * Prepend log message with <n> where n is log level
  * Conditionally enable BFLOG_DEBUG messages
  * Merge bflog.{h,c} into context.h
Matches:
  * Reorder fields in struct match_ops for tight packing
  * Get rid of struct match_ops_map
  * Rename udp_match_ops to xt_udp
  * Use XT_ALIGN macro
  * Store payload size in match size
  * Move udp match routines into a separate file
Targets:
  * Reorder fields in struct target_ops for tight packing
  * Get rid of struct target_ops_map
  * Add comments for convert_verdict function
Rules:
  * Add validation
Tables:
  * Combine table_map and table_list into table_index
  * Add validation
Sockopts:
  * Handle IPT_SO_GET_REVISION_TARGET

1. https://lore.kernel.org/patchwork/patch/902785/
2. https://lore.kernel.org/patchwork/patch/902783/
3. https://kernel.ubuntu.com/~cking/stress-ng/stress-ng.pdf

Dmitrii Banshchikov (13):
  bpfilter: Add types for usermode helper
  bpfilter: Add logging facility
  tools: Add bpfilter usermode helper header
  bpfilter: Add map container
  bpfilter: Add codegen infrastructure
  bpfilter: Add struct match
  bpfilter: Add struct target
  bpfilter: Add struct rule
  bpfilter: Add struct table
  bpfilter: Add table codegen
  bpfilter: Add handling of setsockopt() calls
  bpfilter: Add filter table
  bpfilter: Handle setsockopts

 include/uapi/linux/bpfilter.h                 | 154 +++
 net/bpfilter/Makefile                         |  16 +-
 net/bpfilter/codegen.c                        | 903 ++++++++++++++++++
 net/bpfilter/codegen.h                        | 189 ++++
 net/bpfilter/context.c                        | 138 +++
 net/bpfilter/context.h                        |  47 +
 net/bpfilter/filter-table.c                   | 246 +++++
 net/bpfilter/filter-table.h                   |  17 +
 net/bpfilter/main.c                           | 126 ++-
 net/bpfilter/map-common.c                     |  50 +
 net/bpfilter/map-common.h                     |  18 +
 net/bpfilter/match.c                          |  49 +
 net/bpfilter/match.h                          |  36 +
 net/bpfilter/rule.c                           | 239 +++++
 net/bpfilter/rule.h                           |  34 +
 net/bpfilter/sockopt.c                        | 441 +++++++++
 net/bpfilter/sockopt.h                        |  14 +
 net/bpfilter/table.c                          | 346 +++++++
 net/bpfilter/table.h                          |  54 ++
 net/bpfilter/target.c                         | 184 ++++
 net/bpfilter/target.h                         |  52 +
 net/bpfilter/xt_udp.c                         |  96 ++
 tools/include/uapi/linux/bpfilter.h           | 178 ++++
 .../testing/selftests/bpf/bpfilter/.gitignore |   8 +
 tools/testing/selftests/bpf/bpfilter/Makefile |  59 ++
 .../selftests/bpf/bpfilter/bpfilter_util.h    |  79 ++
 .../selftests/bpf/bpfilter/test_codegen.c     | 293 ++++++
 .../testing/selftests/bpf/bpfilter/test_map.c |  63 ++
 .../selftests/bpf/bpfilter/test_match.c       |  61 ++
 .../selftests/bpf/bpfilter/test_rule.c        |  55 ++
 .../selftests/bpf/bpfilter/test_target.c      |  85 ++
 .../selftests/bpf/bpfilter/test_xt_udp.c      |  41 +
 32 files changed, 4327 insertions(+), 44 deletions(-)
 create mode 100644 net/bpfilter/codegen.c
 create mode 100644 net/bpfilter/codegen.h
 create mode 100644 net/bpfilter/context.c
 create mode 100644 net/bpfilter/context.h
 create mode 100644 net/bpfilter/filter-table.c
 create mode 100644 net/bpfilter/filter-table.h
 create mode 100644 net/bpfilter/map-common.c
 create mode 100644 net/bpfilter/map-common.h
 create mode 100644 net/bpfilter/match.c
 create mode 100644 net/bpfilter/match.h
 create mode 100644 net/bpfilter/rule.c
 create mode 100644 net/bpfilter/rule.h
 create mode 100644 net/bpfilter/sockopt.c
 create mode 100644 net/bpfilter/sockopt.h
 create mode 100644 net/bpfilter/table.c
 create mode 100644 net/bpfilter/table.h
 create mode 100644 net/bpfilter/target.c
 create mode 100644 net/bpfilter/target.h
 create mode 100644 net/bpfilter/xt_udp.c
 create mode 100644 tools/include/uapi/linux/bpfilter.h
 create mode 100644 tools/testing/selftests/bpf/bpfilter/.gitignore
 create mode 100644 tools/testing/selftests/bpf/bpfilter/Makefile
 create mode 100644 tools/testing/selftests/bpf/bpfilter/bpfilter_util.h
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_codegen.c
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_map.c
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_match.c
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_rule.c
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_target.c
 create mode 100644 tools/testing/selftests/bpf/bpfilter/test_xt_udp.c

-- 
2.25.1


^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2021-08-31 15:46 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-29 18:35 [PATCH bpf-next v2 00/13] bpfilter Dmitrii Banshchikov
2021-08-29 18:35 ` [PATCH bpf-next v2 01/13] bpfilter: Add types for usermode helper Dmitrii Banshchikov
2021-08-29 18:35 ` [PATCH bpf-next v2 02/13] bpfilter: Add logging facility Dmitrii Banshchikov
2021-08-29 18:35 ` [PATCH bpf-next v2 03/13] tools: Add bpfilter usermode helper header Dmitrii Banshchikov
2021-08-29 18:35 ` [PATCH bpf-next v2 04/13] bpfilter: Add map container Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 05/13] bpfilter: Add codegen infrastructure Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 06/13] bpfilter: Add struct match Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 07/13] bpfilter: Add struct target Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 08/13] bpfilter: Add struct rule Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 09/13] bpfilter: Add struct table Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 10/13] bpfilter: Add table codegen Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 11/13] bpfilter: Add handling of setsockopt() calls Dmitrii Banshchikov
2021-08-29 18:36 ` [PATCH bpf-next v2 12/13] bpfilter: Add filter table Dmitrii Banshchikov
2021-08-30 19:45   ` Alexei Starovoitov
2021-08-30 20:54     ` Dmitrii Banshchikov
2021-08-30 23:45       ` Alexei Starovoitov
2021-08-31 12:52         ` Dmitrii Banshchikov
2021-08-31 15:45           ` Alexei Starovoitov
2021-08-29 18:36 ` [PATCH bpf-next v2 13/13] bpfilter: Handle setsockopts Dmitrii Banshchikov
2021-08-29 19:13 ` [PATCH bpf-next v2 00/13] bpfilter Raymond Burkholder
2021-08-30 12:54   ` Dmitrii Banshchikov
2021-08-31  1:56 ` Jamal Hadi Salim
2021-08-31 12:48   ` Dmitrii Banshchikov
2021-08-31 13:38     ` Jamal Hadi Salim

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.