From: Eugen Hristev <eugen.hristev@microchip.com>
To: <jic23@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <nicolas.ferre@microchip.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
<ludovic.desroches@microchip.com>,
Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH v3 00/10] iio: adc: at91-sama5d2_adc: add support for sama7g5
Date: Wed, 1 Sep 2021 15:30:03 +0300 [thread overview]
Message-ID: <20210901123013.329792-1-eugen.hristev@microchip.com> (raw)
Hi,
This series adds support for sama7g5.
The sama7g5 is slightly different from sama5d2, but has the same basic
operations. The register map is a bit different, so, I added some primitives
to differentiate between the two classes of hardware blocks (sama5d2-sam9x60
and sama7g5).
Sama7g5 has 16 channels ADC, no resistive touch, and extra features
(FIFOs, better oversampling , not implemented yet).
It is a rework of the series initially sent here:
https://marc.info/?l=linux-iio&m=161461656807826&w=2
Changes in v3:
updates for the channel indexes ABI
minor nitpicks fixes
fixed krobot report
Changes in v2:
I reworked this according to review by Jonathan, meaning that first I created
a no-op patch that will convert the driver to a more platform specific data
dedicated type of driver. This adds various structures that hold things like
register layout and channel information.
After this I created few patches that implement the main differences between
sama7g5 and older products: the end-of-conversion new register. I added
helper functions to make code more easy to read and more simple.
One the last patches adds the layout and channels for sama7g5.
At this moment in linux-next, the DT for sama7g5 and sama7g5ek is present,
and the last patches add and enable this node in DT for this board.
Eugen
Eugen Hristev (10):
dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
iio: adc: at91-sama5d2_adc: initialize hardware after clock is started
iio: adc: at91-sama5d2_adc: remove unused definition
iio: adc: at91-sama5d2_adc: convert to platform specific data
structures
iio: adc: at91-sama5d2_adc: add support for separate end of conversion
registers
iio: adc: at91-sama5d2_adc: add helper for COR register
iio: adc: at91-sama5d2_adc: add support for sama7g5 device
iio: adc: at91-sama5d2_adc: update copyright and authors information
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama7g5ek: enable ADC on the board
.../bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
arch/arm/boot/dts/at91-sama7g5ek.dts | 8 +
arch/arm/boot/dts/sama7g5.dtsi | 16 +
drivers/iio/adc/at91-sama5d2_adc.c | 594 ++++++++++++------
4 files changed, 432 insertions(+), 187 deletions(-)
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Eugen Hristev <eugen.hristev@microchip.com>
To: <jic23@kernel.org>, <linux-iio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <nicolas.ferre@microchip.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
<ludovic.desroches@microchip.com>,
Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH v3 00/10] iio: adc: at91-sama5d2_adc: add support for sama7g5
Date: Wed, 1 Sep 2021 15:30:03 +0300 [thread overview]
Message-ID: <20210901123013.329792-1-eugen.hristev@microchip.com> (raw)
Hi,
This series adds support for sama7g5.
The sama7g5 is slightly different from sama5d2, but has the same basic
operations. The register map is a bit different, so, I added some primitives
to differentiate between the two classes of hardware blocks (sama5d2-sam9x60
and sama7g5).
Sama7g5 has 16 channels ADC, no resistive touch, and extra features
(FIFOs, better oversampling , not implemented yet).
It is a rework of the series initially sent here:
https://marc.info/?l=linux-iio&m=161461656807826&w=2
Changes in v3:
updates for the channel indexes ABI
minor nitpicks fixes
fixed krobot report
Changes in v2:
I reworked this according to review by Jonathan, meaning that first I created
a no-op patch that will convert the driver to a more platform specific data
dedicated type of driver. This adds various structures that hold things like
register layout and channel information.
After this I created few patches that implement the main differences between
sama7g5 and older products: the end-of-conversion new register. I added
helper functions to make code more easy to read and more simple.
One the last patches adds the layout and channels for sama7g5.
At this moment in linux-next, the DT for sama7g5 and sama7g5ek is present,
and the last patches add and enable this node in DT for this board.
Eugen
Eugen Hristev (10):
dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
iio: adc: at91-sama5d2_adc: initialize hardware after clock is started
iio: adc: at91-sama5d2_adc: remove unused definition
iio: adc: at91-sama5d2_adc: convert to platform specific data
structures
iio: adc: at91-sama5d2_adc: add support for separate end of conversion
registers
iio: adc: at91-sama5d2_adc: add helper for COR register
iio: adc: at91-sama5d2_adc: add support for sama7g5 device
iio: adc: at91-sama5d2_adc: update copyright and authors information
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama7g5ek: enable ADC on the board
.../bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
arch/arm/boot/dts/at91-sama7g5ek.dts | 8 +
arch/arm/boot/dts/sama7g5.dtsi | 16 +
drivers/iio/adc/at91-sama5d2_adc.c | 594 ++++++++++++------
4 files changed, 432 insertions(+), 187 deletions(-)
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-09-01 12:31 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-01 12:30 Eugen Hristev [this message]
2021-09-01 12:30 ` [PATCH v3 00/10] iio: adc: at91-sama5d2_adc: add support for sama7g5 Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 01/10] dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 02/10] iio: adc: at91-sama5d2_adc: initialize hardware after clock is started Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 03/10] iio: adc: at91-sama5d2_adc: remove unused definition Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 04/10] iio: adc: at91-sama5d2_adc: convert to platform specific data structures Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 14:31 ` Eugen.Hristev
2021-09-01 14:31 ` Eugen.Hristev
2021-09-05 10:24 ` Jonathan Cameron
2021-09-05 10:24 ` Jonathan Cameron
2021-09-01 12:30 ` [PATCH v3 05/10] iio: adc: at91-sama5d2_adc: add support for separate end of conversion registers Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 06/10] iio: adc: at91-sama5d2_adc: add helper for COR register Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 07/10] iio: adc: at91-sama5d2_adc: add support for sama7g5 device Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 08/10] iio: adc: at91-sama5d2_adc: update copyright and authors information Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-01 12:30 ` [PATCH v3 09/10] ARM: dts: at91: sama7g5: add node for the ADC Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-15 9:16 ` Nicolas Ferre
2021-09-15 9:16 ` Nicolas Ferre
2021-09-01 12:30 ` [PATCH v3 10/10] ARM: dts: at91: sama7g5ek: enable ADC on the board Eugen Hristev
2021-09-01 12:30 ` Eugen Hristev
2021-09-15 9:17 ` Nicolas Ferre
2021-09-15 9:17 ` Nicolas Ferre
2021-09-05 10:28 ` [PATCH v3 00/10] iio: adc: at91-sama5d2_adc: add support for sama7g5 Jonathan Cameron
2021-09-05 10:28 ` Jonathan Cameron
2021-09-15 9:16 ` Nicolas Ferre
2021-09-15 9:16 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901123013.329792-1-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.