[PATCH AUTOSEL 5.4 01/37] clk: rockchip: rk3036: fix up the sclk_sfc parent error

[PATCH AUTOSEL 5.4 01/37] clk: rockchip: rk3036: fix up the sclk_sfc parent error

[Sasha Levin]

From: Jon Lin <jon.lin@rock-chips.com>

[ Upstream commit 0be3df186f870cbde56b223c1ad7892109c9c440 ]

Choose the correct pll

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210713094456.23288-5-jon.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3036.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 6a46f85ad837..1814be5ef574 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -120,6 +120,7 @@ PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
 PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
 
 PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll", "usb480m" };
+PNAME(mux_pll_src_dmyapll_dpll_gpll_xin24_p)   = { "dummy_apll", "dpll", "gpll", "xin24m" };
 
 PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
 PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
@@ -339,7 +340,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 4, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_dmyapll_dpll_gpll_xin24_p, 0,
 			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
-- 
2.30.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH AUTOSEL 5.4 01/37] clk: rockchip: rk3036: fix up the sclk_sfc parent error

[Sasha Levin]

From: Jon Lin <jon.lin@rock-chips.com>

[ Upstream commit 0be3df186f870cbde56b223c1ad7892109c9c440 ]

Choose the correct pll

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210713094456.23288-5-jon.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3036.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 6a46f85ad837..1814be5ef574 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -120,6 +120,7 @@ PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
 PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
 
 PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll", "usb480m" };
+PNAME(mux_pll_src_dmyapll_dpll_gpll_xin24_p)   = { "dummy_apll", "dpll", "gpll", "xin24m" };
 
 PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
 PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
@@ -339,7 +340,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 4, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_dmyapll_dpll_gpll_xin24_p, 0,
 			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 01/37] clk: rockchip: rk3036: fix up the sclk_sfc parent error

[Sasha Levin]

From: Jon Lin <jon.lin@rock-chips.com>

[ Upstream commit 0be3df186f870cbde56b223c1ad7892109c9c440 ]

Choose the correct pll

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210713094456.23288-5-jon.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3036.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 6a46f85ad837..1814be5ef574 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -120,6 +120,7 @@ PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
 PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
 
 PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll", "usb480m" };
+PNAME(mux_pll_src_dmyapll_dpll_gpll_xin24_p)   = { "dummy_apll", "dpll", "gpll", "xin24m" };
 
 PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
 PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
@@ -339,7 +340,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 4, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_dmyapll_dpll_gpll_xin24_p, 0,
 			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 02/37] scsi: be2iscsi: Fix use-after-free during IP updates

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit 7b0ddc1346089b62b45e688e350c9e1c3f7a3ab2 ]

This fixes a bug found by Lv Yunlong where, because beiscsi_exec_nemb_cmd()
frees memory for the be_dma_mem cmd(), we can access freed memory when
beiscsi_if_clr_ip()/beiscsi_if_set_ip()'s call to beiscsi_exec_nemb_cmd()
fails and we access the freed req. This fixes the issue by having the
caller free the cmd's memory.

Link: https://lore.kernel.org/r/20210701190840.175120-1-michael.christie@oracle.com
Reported-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/be2iscsi/be_mgmt.c | 84 ++++++++++++++++++---------------
 1 file changed, 45 insertions(+), 39 deletions(-)

diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index d4febaadfaa3..6797ff249588 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -234,8 +234,7 @@ static int beiscsi_exec_nemb_cmd(struct beiscsi_hba *phba,
 	wrb = alloc_mcc_wrb(phba, &tag);
 	if (!wrb) {
 		mutex_unlock(&ctrl->mbox_lock);
-		rc = -ENOMEM;
-		goto free_cmd;
+		return -ENOMEM;
 	}
 
 	sge = nonembedded_sgl(wrb);
@@ -268,24 +267,6 @@ static int beiscsi_exec_nemb_cmd(struct beiscsi_hba *phba,
 	/* copy the response, if any */
 	if (resp_buf)
 		memcpy(resp_buf, nonemb_cmd->va, resp_buf_len);
-	/**
-	 * This is special case of NTWK_GET_IF_INFO where the size of
-	 * response is not known. beiscsi_if_get_info checks the return
-	 * value to free DMA buffer.
-	 */
-	if (rc == -EAGAIN)
-		return rc;
-
-	/**
-	 * If FW is busy that is driver timed out, DMA buffer is saved with
-	 * the tag, only when the cmd completes this buffer is freed.
-	 */
-	if (rc == -EBUSY)
-		return rc;
-
-free_cmd:
-	dma_free_coherent(&ctrl->pdev->dev, nonemb_cmd->size,
-			    nonemb_cmd->va, nonemb_cmd->dma);
 	return rc;
 }
 
@@ -308,6 +289,19 @@ static int beiscsi_prep_nemb_cmd(struct beiscsi_hba *phba,
 	return 0;
 }
 
+static void beiscsi_free_nemb_cmd(struct beiscsi_hba *phba,
+				  struct be_dma_mem *cmd, int rc)
+{
+	/*
+	 * If FW is busy the DMA buffer is saved with the tag. When the cmd
+	 * completes this buffer is freed.
+	 */
+	if (rc == -EBUSY)
+		return;
+
+	dma_free_coherent(&phba->ctrl.pdev->dev, cmd->size, cmd->va, cmd->dma);
+}
+
 static void __beiscsi_eq_delay_compl(struct beiscsi_hba *phba, unsigned int tag)
 {
 	struct be_dma_mem *tag_mem;
@@ -343,8 +337,16 @@ int beiscsi_modify_eq_delay(struct beiscsi_hba *phba,
 				cpu_to_le32(set_eqd[i].delay_multiplier);
 	}
 
-	return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd,
-				     __beiscsi_eq_delay_compl, NULL, 0);
+	rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, __beiscsi_eq_delay_compl,
+				   NULL, 0);
+	if (rc) {
+		/*
+		 * Only free on failure. Async cmds are handled like -EBUSY
+		 * where it's handled for us.
+		 */
+		beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
+	}
+	return rc;
 }
 
 /**
@@ -371,6 +373,7 @@ int beiscsi_get_initiator_name(struct beiscsi_hba *phba, char *name, bool cfg)
 		req->hdr.version = 1;
 	rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
 				   &resp, sizeof(resp));
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 	if (rc) {
 		beiscsi_log(phba, KERN_ERR,
 			    BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
@@ -448,7 +451,9 @@ static int beiscsi_if_mod_gw(struct beiscsi_hba *phba,
 	req->ip_addr.ip_type = ip_type;
 	memcpy(req->ip_addr.addr, gw,
 	       (ip_type < BEISCSI_IP_TYPE_V6) ? IP_V4_LEN : IP_V6_LEN);
-	return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
+	rt_val = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rt_val);
+	return rt_val;
 }
 
 int beiscsi_if_set_gw(struct beiscsi_hba *phba, u32 ip_type, u8 *gw)
@@ -498,8 +503,10 @@ int beiscsi_if_get_gw(struct beiscsi_hba *phba, u32 ip_type,
 	req = nonemb_cmd.va;
 	req->ip_type = ip_type;
 
-	return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
-				     resp, sizeof(*resp));
+	rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, resp,
+				   sizeof(*resp));
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
+	return rc;
 }
 
 static int
@@ -536,6 +543,7 @@ beiscsi_if_clr_ip(struct beiscsi_hba *phba,
 			    "BG_%d : failed to clear IP: rc %d status %d\n",
 			    rc, req->ip_params.ip_record.status);
 	}
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 	return rc;
 }
 
@@ -580,6 +588,7 @@ beiscsi_if_set_ip(struct beiscsi_hba *phba, u8 *ip,
 		if (req->ip_params.ip_record.status)
 			rc = -EINVAL;
 	}
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 	return rc;
 }
 
@@ -607,6 +616,7 @@ int beiscsi_if_en_static(struct beiscsi_hba *phba, u32 ip_type,
 		reldhcp->interface_hndl = phba->interface_handle;
 		reldhcp->ip_type = ip_type;
 		rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
+		beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 		if (rc < 0) {
 			beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_CONFIG,
 				    "BG_%d : failed to release existing DHCP: %d\n",
@@ -688,7 +698,7 @@ int beiscsi_if_en_dhcp(struct beiscsi_hba *phba, u32 ip_type)
 	dhcpreq->interface_hndl = phba->interface_handle;
 	dhcpreq->ip_type = ip_type;
 	rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, NULL, 0);
-
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 exit:
 	kfree(if_info);
 	return rc;
@@ -761,11 +771,8 @@ int beiscsi_if_get_info(struct beiscsi_hba *phba, int ip_type,
 				    BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
 				    "BG_%d : Memory Allocation Failure\n");
 
-				/* Free the DMA memory for the IOCTL issuing */
-				dma_free_coherent(&phba->ctrl.pdev->dev,
-						    nonemb_cmd.size,
-						    nonemb_cmd.va,
-						    nonemb_cmd.dma);
+				beiscsi_free_nemb_cmd(phba, &nonemb_cmd,
+						      -ENOMEM);
 				return -ENOMEM;
 		}
 
@@ -780,15 +787,13 @@ int beiscsi_if_get_info(struct beiscsi_hba *phba, int ip_type,
 				      nonemb_cmd.va)->actual_resp_len;
 			ioctl_size += sizeof(struct be_cmd_req_hdr);
 
-			/* Free the previous allocated DMA memory */
-			dma_free_coherent(&phba->ctrl.pdev->dev, nonemb_cmd.size,
-					    nonemb_cmd.va,
-					    nonemb_cmd.dma);
-
+			beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 			/* Free the virtual memory */
 			kfree(*if_info);
-		} else
+		} else {
+			beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
 			break;
+		}
 	} while (true);
 	return rc;
 }
@@ -805,8 +810,9 @@ int mgmt_get_nic_conf(struct beiscsi_hba *phba,
 	if (rc)
 		return rc;
 
-	return beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL,
-				     nic, sizeof(*nic));
+	rc = beiscsi_exec_nemb_cmd(phba, &nonemb_cmd, NULL, nic, sizeof(*nic));
+	beiscsi_free_nemb_cmd(phba, &nonemb_cmd, rc);
+	return rc;
 }
 
 static void beiscsi_boot_process_compl(struct beiscsi_hba *phba,
-- 
2.30.2

[PATCH AUTOSEL 5.4 03/37] scsi: lpfc: Fix NVMe support reporting in log message

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit ae463b60235e7a5decffbb0bd7209952ccda78eb ]

The NVMe support indicator in log message 6422 is displaying a field that
was initialized but never set to indicate NVMe support.  Remove obsolete
nvme_support element from the lpfc_hba structure and change log message to
display NVMe support status as reported in SLI4 Config Parameters mailbox
command.

Link: https://lore.kernel.org/r/20210707184351.67872-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h      | 1 -
 drivers/scsi/lpfc/lpfc_init.c | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 8943d42fc406..767dbc4a5276 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -791,7 +791,6 @@ struct lpfc_hba {
 	uint8_t  wwpn[8];
 	uint32_t RandomData[7];
 	uint8_t  fcp_embed_io;
-	uint8_t  nvme_support;	/* Firmware supports NVME */
 	uint8_t  nvmet_support;	/* driver supports NVMET */
 #define LPFC_NVMET_MAX_PORTS	32
 	uint8_t  mds_diags_support;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b5cee2a2ac66..393909a71c59 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11653,7 +11653,6 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 					bf_get(cfg_xib, mbx_sli4_parameters),
 					phba->cfg_enable_fc4_type);
 fcponly:
-			phba->nvme_support = 0;
 			phba->nvmet_support = 0;
 			phba->cfg_nvmet_mrq = 0;
 			phba->cfg_nvme_seg_cnt = 0;
@@ -11714,7 +11713,7 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			"6422 XIB %d PBDE %d: FCP %d NVME %d %d %d\n",
 			bf_get(cfg_xib, mbx_sli4_parameters),
 			phba->cfg_enable_pbde,
-			phba->fcp_embed_io, phba->nvme_support,
+			phba->fcp_embed_io, sli4_params->nvme,
 			phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);
 
 	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
-- 
2.30.2

[f2fs-dev] [PATCH AUTOSEL 5.4 04/37] f2fs: Revert "f2fs: Fix indefinite loop in f2fs_gc() v1"

[Sasha Levin]

From: Jia Yang <jiayang5@huawei.com>

[ Upstream commit 10d0786b39b3b91c4fbf8c2926e97ab456a4eea1 ]

This reverts commit 957fa47823dfe449c5a15a944e4e7a299a6601db.

The patch "f2fs: Fix indefinite loop in f2fs_gc()" v1 and v4 are all
merged. Patch v4 is test info for patch v1. Patch v1 doesn't work and
may cause that sbi->cur_victim_sec can't be resetted to NULL_SEGNO,
which makes SSR unable to get segment of sbi->cur_victim_sec.
So it should be reverted.

The mails record:
[1] https://lore.kernel.org/linux-f2fs-devel/7288dcd4-b168-7656-d1af-7e2cafa4f720@huawei.com/T/
[2] https://lore.kernel.org/linux-f2fs-devel/20190809153653.GD93481@jaegeuk-macbookpro.roam.corp.google.com/T/

Signed-off-by: Jia Yang <jiayang5@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/gc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index a78aa5480454..67e2b0de1ef4 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1332,7 +1332,7 @@ int f2fs_gc(struct f2fs_sb_info *sbi, bool sync,
 		round++;
 	}
 
-	if (gc_type == FG_GC && seg_freed)
+	if (gc_type == FG_GC)
 		sbi->cur_victim_sec = NULL_SEGNO;
 
 	if (sync)
-- 
2.30.2



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 5.4 04/37] f2fs: Revert "f2fs: Fix indefinite loop in f2fs_gc() v1"

[Sasha Levin]

From: Jia Yang <jiayang5@huawei.com>

[ Upstream commit 10d0786b39b3b91c4fbf8c2926e97ab456a4eea1 ]

This reverts commit 957fa47823dfe449c5a15a944e4e7a299a6601db.

The patch "f2fs: Fix indefinite loop in f2fs_gc()" v1 and v4 are all
merged. Patch v4 is test info for patch v1. Patch v1 doesn't work and
may cause that sbi->cur_victim_sec can't be resetted to NULL_SEGNO,
which makes SSR unable to get segment of sbi->cur_victim_sec.
So it should be reverted.

The mails record:
[1] https://lore.kernel.org/linux-f2fs-devel/7288dcd4-b168-7656-d1af-7e2cafa4f720@huawei.com/T/
[2] https://lore.kernel.org/linux-f2fs-devel/20190809153653.GD93481@jaegeuk-macbookpro.roam.corp.google.com/T/

Signed-off-by: Jia Yang <jiayang5@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/gc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index a78aa5480454..67e2b0de1ef4 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1332,7 +1332,7 @@ int f2fs_gc(struct f2fs_sb_info *sbi, bool sync,
 		round++;
 	}
 
-	if (gc_type == FG_GC && seg_freed)
+	if (gc_type == FG_GC)
 		sbi->cur_victim_sec = NULL_SEGNO;
 
 	if (sync)
-- 
2.30.2

[PATCH AUTOSEL 5.4 05/37] scsi: smartpqi: Fix ISR accessing uninitialized data

[Sasha Levin]

From: Mike McGowen <mike.mcgowen@microchip.com>

[ Upstream commit 0777a3fb98f0ea546561d04db4fd325248c39961 ]

Correct driver's ISR accessing a data structure member that has not been
fully initialized during driver initialization.

The pqi queue groups can have uninitialized members when an interrupt
fires. This has not resulted in any driver crashes. This was found during
our own internal testing. No bugs were ever filed.

Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.com
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 9bc451004184..824f19475b27 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -7208,11 +7208,11 @@ static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
 
 	pqi_init_operational_queues(ctrl_info);
 
-	rc = pqi_request_irqs(ctrl_info);
+	rc = pqi_create_queues(ctrl_info);
 	if (rc)
 		return rc;
 
-	rc = pqi_create_queues(ctrl_info);
+	rc = pqi_request_irqs(ctrl_info);
 	if (rc)
 		return rc;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 06/37] scsi: lpfc: Fix cq_id truncation in rq create

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit df3d78c3eb4eba13b3ef9740a8c664508ee644ae ]

On the newer hardware, CQ_ID values can be larger than seen on previous
generations. This exposed an issue in the driver where its definition of
cq_id in the RQ Create mailbox cmd was too small, thus the cq_id was
truncated, causing the command to fail.

Revise the RQ_CREATE CQ_ID field to its proper size (16 bits).

Link: https://lore.kernel.org/r/20210722221721.74388-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_hw4.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index b8a772f80d6c..b4bb82308d7b 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1548,7 +1548,7 @@ struct rq_context {
 #define lpfc_rq_context_hdr_size_WORD	word1
 	uint32_t word2;
 #define lpfc_rq_context_cq_id_SHIFT	16
-#define lpfc_rq_context_cq_id_MASK	0x000003FF
+#define lpfc_rq_context_cq_id_MASK	0x0000FFFF
 #define lpfc_rq_context_cq_id_WORD	word2
 #define lpfc_rq_context_buf_size_SHIFT	0
 #define lpfc_rq_context_buf_size_MASK	0x0000FFFF
-- 
2.30.2

[PATCH AUTOSEL 5.4 07/37] clk: mediatek: Fix asymmetrical PLL enable and disable control

[Sasha Levin]

From: Chun-Jie Chen <chun-jie.chen@mediatek.com>

[ Upstream commit 7cc4e1bbe300c5cf610ece8eca6c6751b8bc74db ]

In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-pll.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f440f2cd0b69..11ed5d1d1c36 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	r = readl(pll->pwr_addr) | CON0_PWR_ON;
 	writel(r, pll->pwr_addr);
@@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 	writel(r, pll->pwr_addr);
 	udelay(1);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r |= pll->data->en_mask;
+	r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) | div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
 	__mtk_pll_tuner_enable(pll);
 
 	udelay(20);
@@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	if (pll->data->flags & HAVE_RST_BAR) {
 		r = readl(pll->base_addr + REG_CON0);
@@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 
 	__mtk_pll_tuner_disable(pll);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r &= ~CON0_BASE_EN;
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) & ~div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
+	r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
 	r = readl(pll->pwr_addr) | CON0_ISO_EN;
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 07/37] clk: mediatek: Fix asymmetrical PLL enable and disable control

[Sasha Levin]

From: Chun-Jie Chen <chun-jie.chen@mediatek.com>

[ Upstream commit 7cc4e1bbe300c5cf610ece8eca6c6751b8bc74db ]

In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-pll.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f440f2cd0b69..11ed5d1d1c36 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	r = readl(pll->pwr_addr) | CON0_PWR_ON;
 	writel(r, pll->pwr_addr);
@@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 	writel(r, pll->pwr_addr);
 	udelay(1);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r |= pll->data->en_mask;
+	r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) | div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
 	__mtk_pll_tuner_enable(pll);
 
 	udelay(20);
@@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	if (pll->data->flags & HAVE_RST_BAR) {
 		r = readl(pll->base_addr + REG_CON0);
@@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 
 	__mtk_pll_tuner_disable(pll);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r &= ~CON0_BASE_EN;
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) & ~div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
+	r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
 	r = readl(pll->pwr_addr) | CON0_ISO_EN;
-- 
2.30.2

[PATCH AUTOSEL 5.4 07/37] clk: mediatek: Fix asymmetrical PLL enable and disable control

[Sasha Levin]

From: Chun-Jie Chen <chun-jie.chen@mediatek.com>

[ Upstream commit 7cc4e1bbe300c5cf610ece8eca6c6751b8bc74db ]

In fact, the en_mask is a combination of divider enable mask
and pll enable bit(bit0).
Before this patch, we enabled both divider mask and bit0 in prepare(),
but only cleared the bit0 in unprepare().
In the future, we hope en_mask will only be used as divider enable mask.
The enable register(CON0) will be set in 2 steps:
first is divider mask, and then bit0 during prepare(), and vice versa.
But considering backward compatibility, at this stage we allow en_mask
to be a combination or a pure divider enable mask.
And then we will make en_mask a pure divider enable mask in another
following patch series.

Reviewed-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Link: https://lore.kernel.org/r/20210726105719.15793-7-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mediatek/clk-pll.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f440f2cd0b69..11ed5d1d1c36 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -238,6 +238,7 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	r = readl(pll->pwr_addr) | CON0_PWR_ON;
 	writel(r, pll->pwr_addr);
@@ -247,10 +248,15 @@ static int mtk_pll_prepare(struct clk_hw *hw)
 	writel(r, pll->pwr_addr);
 	udelay(1);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r |= pll->data->en_mask;
+	r = readl(pll->base_addr + REG_CON0) | CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) | div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
 	__mtk_pll_tuner_enable(pll);
 
 	udelay(20);
@@ -268,6 +274,7 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 {
 	struct mtk_clk_pll *pll = to_mtk_clk_pll(hw);
 	u32 r;
+	u32 div_en_mask;
 
 	if (pll->data->flags & HAVE_RST_BAR) {
 		r = readl(pll->base_addr + REG_CON0);
@@ -277,8 +284,13 @@ static void mtk_pll_unprepare(struct clk_hw *hw)
 
 	__mtk_pll_tuner_disable(pll);
 
-	r = readl(pll->base_addr + REG_CON0);
-	r &= ~CON0_BASE_EN;
+	div_en_mask = pll->data->en_mask & ~CON0_BASE_EN;
+	if (div_en_mask) {
+		r = readl(pll->base_addr + REG_CON0) & ~div_en_mask;
+		writel(r, pll->base_addr + REG_CON0);
+	}
+
+	r = readl(pll->base_addr + REG_CON0) & ~CON0_BASE_EN;
 	writel(r, pll->base_addr + REG_CON0);
 
 	r = readl(pll->pwr_addr) | CON0_ISO_EN;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 08/37] HID: usbhid: free raw_report buffers in usbhid_stop

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit f7744fa16b96da57187dc8e5634152d3b63d72de ]

Free the unsent raw_report buffers when the device is removed.

Fixes a memory leak reported by syzbot at:
https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47

Reported-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Tested-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/usbhid/hid-core.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 1cfbbaf6901d..8537fcdb456d 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -503,7 +503,7 @@ static void hid_ctrl(struct urb *urb)
 
 	if (unplug) {
 		usbhid->ctrltail = usbhid->ctrlhead;
-	} else {
+	} else if (usbhid->ctrlhead != usbhid->ctrltail) {
 		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
 
 		if (usbhid->ctrlhead != usbhid->ctrltail &&
@@ -1221,9 +1221,20 @@ static void usbhid_stop(struct hid_device *hid)
 	mutex_lock(&usbhid->mutex);
 
 	clear_bit(HID_STARTED, &usbhid->iofl);
+
 	spin_lock_irq(&usbhid->lock);	/* Sync with error and led handlers */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
+	while (usbhid->ctrltail != usbhid->ctrlhead) {
+		if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_OUT) {
+			kfree(usbhid->ctrl[usbhid->ctrltail].raw_report);
+			usbhid->ctrl[usbhid->ctrltail].raw_report = NULL;
+		}
+
+		usbhid->ctrltail = (usbhid->ctrltail + 1) &
+			(HID_CONTROL_FIFO_SIZE - 1);
+	}
 	spin_unlock_irq(&usbhid->lock);
+
 	usb_kill_urb(usbhid->urbin);
 	usb_kill_urb(usbhid->urbout);
 	usb_kill_urb(usbhid->urbctrl);
-- 
2.30.2

[f2fs-dev] [PATCH AUTOSEL 5.4 09/37] f2fs: fix to force keeping write barrier for strict fsync mode

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 2787991516468bfafafb9bf2b45a848e6b202e7c ]

[1] https://www.mail-archive.com/linux-f2fs-devel@lists.sourceforge.net/msg15126.html

As [1] reported, if lower device doesn't support write barrier, in below
case:

- write page #0; persist
- overwrite page #0
- fsync
 - write data page #0 OPU into device's cache
 - write inode page into device's cache
 - issue flush

If SPO is triggered during flush command, inode page can be persisted
before data page #0, so that after recovery, inode page can be recovered
with new physical block address of data page #0, however there may
contains dummy data in new physical block address.

Then what user will see is: after overwrite & fsync + SPO, old data in
file was corrupted, if any user do care about such case, we can suggest
user to use STRICT fsync mode, in this mode, we will force to use atomic
write sematics to keep write order in between data/node and last node,
so that it avoids potential data corruption during fsync().

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6e58b2e62b18..4fc0e62a5ef3 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -259,6 +259,18 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
 				f2fs_exist_written_data(sbi, ino, UPDATE_INO))
 			goto flush_out;
 		goto out;
+	} else {
+		/*
+		 * for OPU case, during fsync(), node can be persisted before
+		 * data when lower device doesn't support write barrier, result
+		 * in data corruption after SPO.
+		 * So for strict fsync mode, force to use atomic write sematics
+		 * to keep write order in between data/node and last node to
+		 * avoid potential data corruption.
+		 */
+		if (F2FS_OPTION(sbi).fsync_mode ==
+				FSYNC_MODE_STRICT && !atomic)
+			atomic = true;
 	}
 go_write:
 	/*
-- 
2.30.2



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 5.4 09/37] f2fs: fix to force keeping write barrier for strict fsync mode

[Sasha Levin]

From: Chao Yu <chao@kernel.org>

[ Upstream commit 2787991516468bfafafb9bf2b45a848e6b202e7c ]

[1] https://www.mail-archive.com/linux-f2fs-devel@lists.sourceforge.net/msg15126.html

As [1] reported, if lower device doesn't support write barrier, in below
case:

- write page #0; persist
- overwrite page #0
- fsync
 - write data page #0 OPU into device's cache
 - write inode page into device's cache
 - issue flush

If SPO is triggered during flush command, inode page can be persisted
before data page #0, so that after recovery, inode page can be recovered
with new physical block address of data page #0, however there may
contains dummy data in new physical block address.

Then what user will see is: after overwrite & fsync + SPO, old data in
file was corrupted, if any user do care about such case, we can suggest
user to use STRICT fsync mode, in this mode, we will force to use atomic
write sematics to keep write order in between data/node and last node,
so that it avoids potential data corruption during fsync().

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6e58b2e62b18..4fc0e62a5ef3 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -259,6 +259,18 @@ static int f2fs_do_sync_file(struct file *file, loff_t start, loff_t end,
 				f2fs_exist_written_data(sbi, ino, UPDATE_INO))
 			goto flush_out;
 		goto out;
+	} else {
+		/*
+		 * for OPU case, during fsync(), node can be persisted before
+		 * data when lower device doesn't support write barrier, result
+		 * in data corruption after SPO.
+		 * So for strict fsync mode, force to use atomic write sematics
+		 * to keep write order in between data/node and last node to
+		 * avoid potential data corruption.
+		 */
+		if (F2FS_OPTION(sbi).fsync_mode ==
+				FSYNC_MODE_STRICT && !atomic)
+			atomic = true;
 	}
 go_write:
 	/*
-- 
2.30.2

[f2fs-dev] [PATCH AUTOSEL 5.4 10/37] f2fs: fix min_seq_blocks can not make sense in some scenes.

[Sasha Levin]

From: Laibin Qiu <qiulaibin@huawei.com>

[ Upstream commit dc675a97129c4d9d5af55a3d7f23d7e092b8e032 ]

F2FS have dirty page count control for batched sequential
write in writepages, and get the value of min_seq_blocks by
blocks_per_seg * segs_per_sec(segs_per_sec defaults to 1).
But in some scenes we set a lager section size, Min_seq_blocks
will become too large to achieve the expected effect(eg. 4thread
sequential write, the number of merge requests will be reduced).

Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 5ba677f85533..d34fdedf7e86 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4403,7 +4403,7 @@ int f2fs_build_segment_manager(struct f2fs_sb_info *sbi)
 		sm_info->ipu_policy = 1 << F2FS_IPU_FSYNC;
 	sm_info->min_ipu_util = DEF_MIN_IPU_UTIL;
 	sm_info->min_fsync_blocks = DEF_MIN_FSYNC_BLOCKS;
-	sm_info->min_seq_blocks = sbi->blocks_per_seg * sbi->segs_per_sec;
+	sm_info->min_seq_blocks = sbi->blocks_per_seg;
 	sm_info->min_hot_blocks = DEF_MIN_HOT_BLOCKS;
 	sm_info->min_ssr_sections = reserved_sections(sbi);
 
-- 
2.30.2



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 5.4 10/37] f2fs: fix min_seq_blocks can not make sense in some scenes.

[Sasha Levin]

From: Laibin Qiu <qiulaibin@huawei.com>

[ Upstream commit dc675a97129c4d9d5af55a3d7f23d7e092b8e032 ]

F2FS have dirty page count control for batched sequential
write in writepages, and get the value of min_seq_blocks by
blocks_per_seg * segs_per_sec(segs_per_sec defaults to 1).
But in some scenes we set a lager section size, Min_seq_blocks
will become too large to achieve the expected effect(eg. 4thread
sequential write, the number of merge requests will be reduced).

Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 5ba677f85533..d34fdedf7e86 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4403,7 +4403,7 @@ int f2fs_build_segment_manager(struct f2fs_sb_info *sbi)
 		sm_info->ipu_policy = 1 << F2FS_IPU_FSYNC;
 	sm_info->min_ipu_util = DEF_MIN_IPU_UTIL;
 	sm_info->min_fsync_blocks = DEF_MIN_FSYNC_BLOCKS;
-	sm_info->min_seq_blocks = sbi->blocks_per_seg * sbi->segs_per_sec;
+	sm_info->min_seq_blocks = sbi->blocks_per_seg;
 	sm_info->min_hot_blocks = DEF_MIN_HOT_BLOCKS;
 	sm_info->min_ssr_sections = reserved_sections(sbi);
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 11/37] scsi: ufs: Verify UIC locking requirements at runtime

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 35c7d874f5993db04ce3aa310ae088f14b801eda ]

Instead of documenting the locking requirements of the UIC code as
comments, use lockdep_assert_held() such that lockdep verifies the lockdep
requirements at runtime if lockdep is enabled.

Link: https://lore.kernel.org/r/20210722033439.26550-8-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 16 +++++++++-------
 drivers/scsi/ufs/ufshcd.h |  2 +-
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0429ba5d7d23..f8d0fe6cb09d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1986,15 +1986,15 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
+ * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer
  * @hba: per adapter instance
  * @uic_cmd: UIC command
- *
- * Mutex must be held.
  */
 static inline void
 ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	WARN_ON(hba->active_uic_cmd);
 
 	hba->active_uic_cmd = uic_cmd;
@@ -2010,11 +2010,10 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 }
 
 /**
- * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
+ * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command
  * @hba: per adapter instance
  * @uic_cmd: UIC command
  *
- * Must be called with mutex held.
  * Returns 0 only if success.
  */
 static int
@@ -2023,6 +2022,8 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 	int ret;
 	unsigned long flags;
 
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	if (wait_for_completion_timeout(&uic_cmd->done,
 					msecs_to_jiffies(UIC_CMD_TIMEOUT)))
 		ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
@@ -2042,14 +2043,15 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
  * @uic_cmd: UIC command
  * @completion: initialize the completion only if this is set to true
  *
- * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
- * with mutex held and host_lock locked.
  * Returns 0 only if success.
  */
 static int
 __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
 		      bool completion)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+	lockdep_assert_held(hba->host->host_lock);
+
 	if (!ufshcd_ready_for_uic_cmd(hba)) {
 		dev_err(hba->dev,
 			"Controller not ready to accept UIC commands\n");
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 92ef6e6a3e51..803a2a37875b 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -493,7 +493,7 @@ struct ufs_stats {
  * @priv: pointer to variant specific private data
  * @irq: Irq number of the controller
  * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for uic command
+ * @uic_cmd_mutex: mutex for UIC command
  * @tmf_tag_set: TMF tag set.
  * @tmf_queue: Used to allocate TMF tags.
  * @pwr_done: completion for power mode change
-- 
2.30.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 5.4 11/37] scsi: ufs: Verify UIC locking requirements at runtime

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 35c7d874f5993db04ce3aa310ae088f14b801eda ]

Instead of documenting the locking requirements of the UIC code as
comments, use lockdep_assert_held() such that lockdep verifies the lockdep
requirements at runtime if lockdep is enabled.

Link: https://lore.kernel.org/r/20210722033439.26550-8-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 16 +++++++++-------
 drivers/scsi/ufs/ufshcd.h |  2 +-
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0429ba5d7d23..f8d0fe6cb09d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1986,15 +1986,15 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
+ * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer
  * @hba: per adapter instance
  * @uic_cmd: UIC command
- *
- * Mutex must be held.
  */
 static inline void
 ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	WARN_ON(hba->active_uic_cmd);
 
 	hba->active_uic_cmd = uic_cmd;
@@ -2010,11 +2010,10 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 }
 
 /**
- * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
+ * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command
  * @hba: per adapter instance
  * @uic_cmd: UIC command
  *
- * Must be called with mutex held.
  * Returns 0 only if success.
  */
 static int
@@ -2023,6 +2022,8 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 	int ret;
 	unsigned long flags;
 
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	if (wait_for_completion_timeout(&uic_cmd->done,
 					msecs_to_jiffies(UIC_CMD_TIMEOUT)))
 		ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
@@ -2042,14 +2043,15 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
  * @uic_cmd: UIC command
  * @completion: initialize the completion only if this is set to true
  *
- * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
- * with mutex held and host_lock locked.
  * Returns 0 only if success.
  */
 static int
 __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
 		      bool completion)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+	lockdep_assert_held(hba->host->host_lock);
+
 	if (!ufshcd_ready_for_uic_cmd(hba)) {
 		dev_err(hba->dev,
 			"Controller not ready to accept UIC commands\n");
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 92ef6e6a3e51..803a2a37875b 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -493,7 +493,7 @@ struct ufs_stats {
  * @priv: pointer to variant specific private data
  * @irq: Irq number of the controller
  * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for uic command
+ * @uic_cmd_mutex: mutex for UIC command
  * @tmf_tag_set: TMF tag set.
  * @tmf_queue: Used to allocate TMF tags.
  * @pwr_done: completion for power mode change
-- 
2.30.2

[PATCH AUTOSEL 5.4 11/37] scsi: ufs: Verify UIC locking requirements at runtime

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 35c7d874f5993db04ce3aa310ae088f14b801eda ]

Instead of documenting the locking requirements of the UIC code as
comments, use lockdep_assert_held() such that lockdep verifies the lockdep
requirements at runtime if lockdep is enabled.

Link: https://lore.kernel.org/r/20210722033439.26550-8-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 16 +++++++++-------
 drivers/scsi/ufs/ufshcd.h |  2 +-
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0429ba5d7d23..f8d0fe6cb09d 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1986,15 +1986,15 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_dispatch_uic_cmd - Dispatch UIC commands to unipro layers
+ * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer
  * @hba: per adapter instance
  * @uic_cmd: UIC command
- *
- * Mutex must be held.
  */
 static inline void
 ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	WARN_ON(hba->active_uic_cmd);
 
 	hba->active_uic_cmd = uic_cmd;
@@ -2010,11 +2010,10 @@ ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 }
 
 /**
- * ufshcd_wait_for_uic_cmd - Wait complectioin of UIC command
+ * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command
  * @hba: per adapter instance
  * @uic_cmd: UIC command
  *
- * Must be called with mutex held.
  * Returns 0 only if success.
  */
 static int
@@ -2023,6 +2022,8 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
 	int ret;
 	unsigned long flags;
 
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+
 	if (wait_for_completion_timeout(&uic_cmd->done,
 					msecs_to_jiffies(UIC_CMD_TIMEOUT)))
 		ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
@@ -2042,14 +2043,15 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
  * @uic_cmd: UIC command
  * @completion: initialize the completion only if this is set to true
  *
- * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called
- * with mutex held and host_lock locked.
  * Returns 0 only if success.
  */
 static int
 __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
 		      bool completion)
 {
+	lockdep_assert_held(&hba->uic_cmd_mutex);
+	lockdep_assert_held(hba->host->host_lock);
+
 	if (!ufshcd_ready_for_uic_cmd(hba)) {
 		dev_err(hba->dev,
 			"Controller not ready to accept UIC commands\n");
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 92ef6e6a3e51..803a2a37875b 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -493,7 +493,7 @@ struct ufs_stats {
  * @priv: pointer to variant specific private data
  * @irq: Irq number of the controller
  * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for uic command
+ * @uic_cmd_mutex: mutex for UIC command
  * @tmf_tag_set: TMF tag set.
  * @tmf_queue: Used to allocate TMF tags.
  * @pwr_done: completion for power mode change
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 12/37] powerpc: make the install target not depend on any build artifact

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 9bef456b20581e630ef9a13555ca04fed65a859d ]

The install target should not depend on any build artifact.

The reason is explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

Change the PowerPC installation code in a similar way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/Makefile   |  2 +-
 arch/powerpc/boot/install.sh | 14 ++++++++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8c69bd07ada6..459ef5c780f7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -438,7 +438,7 @@ $(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
 	$(Q)rm -f $@; ln $< $@
 
 # Only install the vmlinux
-install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
+install:
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
 
 # Install the vmlinux and other built boot targets.
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index b6a256bc96ee..8d669cf1ccda 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -21,6 +21,20 @@
 # Bail with error code if anything goes wrong
 set -e
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-- 
2.30.2

[PATCH AUTOSEL 5.4 12/37] powerpc: make the install target not depend on any build artifact

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 9bef456b20581e630ef9a13555ca04fed65a859d ]

The install target should not depend on any build artifact.

The reason is explained in commit 19514fc665ff ("arm, kbuild: make
"make install" not depend on vmlinux").

Change the PowerPC installation code in a similar way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/Makefile   |  2 +-
 arch/powerpc/boot/install.sh | 14 ++++++++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 8c69bd07ada6..459ef5c780f7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -438,7 +438,7 @@ $(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
 	$(Q)rm -f $@; ln $< $@
 
 # Only install the vmlinux
-install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
+install:
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
 
 # Install the vmlinux and other built boot targets.
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index b6a256bc96ee..8d669cf1ccda 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -21,6 +21,20 @@
 # Bail with error code if anything goes wrong
 set -e
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-- 
2.30.2

[PATCH AUTOSEL 5.4 13/37] KVM: PPC: Book3S HV: XICS: Fix mapping of passthrough interrupts

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit 1753081f2d445f9157550692fcc4221cd3ff0958 ]

PCI MSIs now live in an MSI domain but the underlying calls, which
will EOI the interrupt in real mode, need an HW IRQ number mapped in
the XICS IRQ domain. Grab it there.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-31-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index bba358f13471..dc897dff8eb9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5020,6 +5020,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	struct kvmppc_passthru_irqmap *pimap;
 	struct irq_chip *chip;
 	int i, rc = 0;
+	struct irq_data *host_data;
 
 	if (!kvm_irq_bypass)
 		return 1;
@@ -5084,7 +5085,14 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	 * the KVM real mode handler.
 	 */
 	smp_wmb();
-	irq_map->r_hwirq = desc->irq_data.hwirq;
+
+	/*
+	 * The 'host_irq' number is mapped in the PCI-MSI domain but
+	 * the underlying calls, which will EOI the interrupt in real
+	 * mode, need an HW IRQ number mapped in the XICS IRQ domain.
+	 */
+	host_data = irq_domain_get_irq_data(irq_get_default_host(), host_irq);
+	irq_map->r_hwirq = (unsigned int)irqd_to_hwirq(host_data);
 
 	if (i == pimap->n_mapped)
 		pimap->n_mapped++;
@@ -5092,7 +5100,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	if (xics_on_xive())
 		rc = kvmppc_xive_set_mapped(kvm, guest_gsi, desc);
 	else
-		kvmppc_xics_set_mapped(kvm, guest_gsi, desc->irq_data.hwirq);
+		kvmppc_xics_set_mapped(kvm, guest_gsi, irq_map->r_hwirq);
 	if (rc)
 		irq_map->r_hwirq = 0;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 13/37] KVM: PPC: Book3S HV: XICS: Fix mapping of passthrough interrupts

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit 1753081f2d445f9157550692fcc4221cd3ff0958 ]

PCI MSIs now live in an MSI domain but the underlying calls, which
will EOI the interrupt in real mode, need an HW IRQ number mapped in
the XICS IRQ domain. Grab it there.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-31-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index bba358f13471..dc897dff8eb9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5020,6 +5020,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	struct kvmppc_passthru_irqmap *pimap;
 	struct irq_chip *chip;
 	int i, rc = 0;
+	struct irq_data *host_data;
 
 	if (!kvm_irq_bypass)
 		return 1;
@@ -5084,7 +5085,14 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	 * the KVM real mode handler.
 	 */
 	smp_wmb();
-	irq_map->r_hwirq = desc->irq_data.hwirq;
+
+	/*
+	 * The 'host_irq' number is mapped in the PCI-MSI domain but
+	 * the underlying calls, which will EOI the interrupt in real
+	 * mode, need an HW IRQ number mapped in the XICS IRQ domain.
+	 */
+	host_data = irq_domain_get_irq_data(irq_get_default_host(), host_irq);
+	irq_map->r_hwirq = (unsigned int)irqd_to_hwirq(host_data);
 
 	if (i = pimap->n_mapped)
 		pimap->n_mapped++;
@@ -5092,7 +5100,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	if (xics_on_xive())
 		rc = kvmppc_xive_set_mapped(kvm, guest_gsi, desc);
 	else
-		kvmppc_xics_set_mapped(kvm, guest_gsi, desc->irq_data.hwirq);
+		kvmppc_xics_set_mapped(kvm, guest_gsi, irq_map->r_hwirq);
 	if (rc)
 		irq_map->r_hwirq = 0;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 13/37] KVM: PPC: Book3S HV: XICS: Fix mapping of passthrough interrupts

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit 1753081f2d445f9157550692fcc4221cd3ff0958 ]

PCI MSIs now live in an MSI domain but the underlying calls, which
will EOI the interrupt in real mode, need an HW IRQ number mapped in
the XICS IRQ domain. Grab it there.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-31-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index bba358f13471..dc897dff8eb9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5020,6 +5020,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	struct kvmppc_passthru_irqmap *pimap;
 	struct irq_chip *chip;
 	int i, rc = 0;
+	struct irq_data *host_data;
 
 	if (!kvm_irq_bypass)
 		return 1;
@@ -5084,7 +5085,14 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	 * the KVM real mode handler.
 	 */
 	smp_wmb();
-	irq_map->r_hwirq = desc->irq_data.hwirq;
+
+	/*
+	 * The 'host_irq' number is mapped in the PCI-MSI domain but
+	 * the underlying calls, which will EOI the interrupt in real
+	 * mode, need an HW IRQ number mapped in the XICS IRQ domain.
+	 */
+	host_data = irq_domain_get_irq_data(irq_get_default_host(), host_irq);
+	irq_map->r_hwirq = (unsigned int)irqd_to_hwirq(host_data);
 
 	if (i == pimap->n_mapped)
 		pimap->n_mapped++;
@@ -5092,7 +5100,7 @@ static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
 	if (xics_on_xive())
 		rc = kvmppc_xive_set_mapped(kvm, guest_gsi, desc);
 	else
-		kvmppc_xics_set_mapped(kvm, guest_gsi, desc->irq_data.hwirq);
+		kvmppc_xics_set_mapped(kvm, guest_gsi, irq_map->r_hwirq);
 	if (rc)
 		irq_map->r_hwirq = 0;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 14/37] jbd2: fix portability problems caused by unaligned accesses

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit a20d1cebb98bba75f2e34fddc768dd8712c1bded ]

This commit applies the e2fsck/recovery.c portions of commit
1e0c8ca7c08a ("e2fsck: fix portability problems caused by unaligned
accesses) from the e2fsprogs git tree.

The on-disk format for the ext4 journal can have unaigned 32-bit
integers.  This can happen when replaying a journal using a obsolete
checksum format (which was never popularly used, since the v3 format
replaced v2 while the metadata checksum feature was being stablized).

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/recovery.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index a4967b27ffb6..a8bb963b9573 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -197,7 +197,7 @@ static int jbd2_descriptor_block_csum_verify(journal_t *j, void *buf)
 static int count_tags(journal_t *journal, struct buffer_head *bh)
 {
 	char *			tagp;
-	journal_block_tag_t *	tag;
+	journal_block_tag_t	tag;
 	int			nr = 0, size = journal->j_blocksize;
 	int			tag_bytes = journal_tag_bytes(journal);
 
@@ -207,14 +207,14 @@ static int count_tags(journal_t *journal, struct buffer_head *bh)
 	tagp = &bh->b_data[sizeof(journal_header_t)];
 
 	while ((tagp - bh->b_data + tag_bytes) <= size) {
-		tag = (journal_block_tag_t *) tagp;
+		memcpy(&tag, tagp, sizeof(tag));
 
 		nr++;
 		tagp += tag_bytes;
-		if (!(tag->t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
+		if (!(tag.t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
 			tagp += 16;
 
-		if (tag->t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
+		if (tag.t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
 			break;
 	}
 
@@ -394,9 +394,9 @@ static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
 }
 
 static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
+				      journal_block_tag3_t *tag3,
 				      void *buf, __u32 sequence)
 {
-	journal_block_tag3_t *tag3 = (journal_block_tag3_t *)tag;
 	__u32 csum32;
 	__be32 seq;
 
@@ -455,7 +455,7 @@ static int do_one_pass(journal_t *journal,
 	while (1) {
 		int			flags;
 		char *			tagp;
-		journal_block_tag_t *	tag;
+		journal_block_tag_t	tag;
 		struct buffer_head *	obh;
 		struct buffer_head *	nbh;
 
@@ -560,8 +560,8 @@ static int do_one_pass(journal_t *journal,
 			       <= journal->j_blocksize - descr_csum_size) {
 				unsigned long io_block;
 
-				tag = (journal_block_tag_t *) tagp;
-				flags = be16_to_cpu(tag->t_flags);
+				memcpy(&tag, tagp, sizeof(tag));
+				flags = be16_to_cpu(tag.t_flags);
 
 				io_block = next_log_block++;
 				wrap(journal, next_log_block);
@@ -579,7 +579,7 @@ static int do_one_pass(journal_t *journal,
 
 					J_ASSERT(obh != NULL);
 					blocknr = read_tag_block(journal,
-								 tag);
+								 &tag);
 
 					/* If the block has been
 					 * revoked, then we're all done
@@ -594,8 +594,8 @@ static int do_one_pass(journal_t *journal,
 
 					/* Look for block corruption */
 					if (!jbd2_block_tag_csum_verify(
-						journal, tag, obh->b_data,
-						be32_to_cpu(tmp->h_sequence))) {
+			journal, &tag, (journal_block_tag3_t *)tagp,
+			obh->b_data, be32_to_cpu(tmp->h_sequence))) {
 						brelse(obh);
 						success = -EFSBADCRC;
 						printk(KERN_ERR "JBD2: Invalid "
-- 
2.30.2

[PATCH AUTOSEL 5.4 15/37] scsi: qla2xxx: Fix port type info

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 01c97f2dd8fb4d2188c779a975031c0fe1ec061d ]

Over time, fcport->port_type became a flag field. The flags within this
field were not defined properly. This caused external tools to read wrong
info.

Link: https://lore.kernel.org/r/20210810043720.1137-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_def.h | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 7c22f8eea3ea..04c713e832a5 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2307,11 +2307,9 @@ struct mbx_24xx_entry {
  */
 typedef enum {
 	FCT_UNKNOWN,
-	FCT_RSCN,
-	FCT_SWITCH,
-	FCT_BROADCAST,
-	FCT_INITIATOR,
-	FCT_TARGET,
+	FCT_BROADCAST = 0x01,
+	FCT_INITIATOR = 0x02,
+	FCT_TARGET    = 0x04,
 	FCT_NVME_INITIATOR = 0x10,
 	FCT_NVME_TARGET = 0x20,
 	FCT_NVME_DISCOVERY = 0x40,
-- 
2.30.2

[PATCH AUTOSEL 5.4 16/37] scsi: qla2xxx: Fix NPIV create erroneous error

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit a57214443f0f85639a0d9bbb8bd658d82dbf0927 ]

When user creates multiple NPIVs, the switch capabilities field is checked
before a vport is allowed to be created. This field is being toggled if a
switch scan is in progress. This creates erroneous reject of vport create.

Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 643b8ae36cbe..a92e81a7b42d 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4359,11 +4359,11 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 	/* initialize */
 	ha->min_external_loopid = SNS_FIRST_LOOP_ID;
 	ha->operating_mode = LOOP;
-	ha->switch_cap = 0;
 
 	switch (topo) {
 	case 0:
 		ql_dbg(ql_dbg_disc, vha, 0x200b, "HBA in NL topology.\n");
+		ha->switch_cap = 0;
 		ha->current_topology = ISP_CFG_NL;
 		strcpy(connect_type, "(Loop)");
 		break;
@@ -4377,6 +4377,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 
 	case 2:
 		ql_dbg(ql_dbg_disc, vha, 0x200d, "HBA in N P2P topology.\n");
+		ha->switch_cap = 0;
 		ha->operating_mode = P2P;
 		ha->current_topology = ISP_CFG_N;
 		strcpy(connect_type, "(N_Port-to-N_Port)");
@@ -4393,6 +4394,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 	default:
 		ql_dbg(ql_dbg_disc, vha, 0x200f,
 		    "HBA in unknown topology %x, using NL.\n", topo);
+		ha->switch_cap = 0;
 		ha->current_topology = ISP_CFG_NL;
 		strcpy(connect_type, "(Loop)");
 		break;
-- 
2.30.2

[PATCH AUTOSEL 5.4 17/37] ovl: skip checking lower file's i_writecount on truncate

[Sasha Levin]

From: Chengguang Xu <cgxu519@mykernel.net>

[ Upstream commit b71759ef1e1730db81dab98e9dab9455e8c7f5a2 ]

It is possible that a directory tree is shared between multiple overlay
instances as a lower layer.  In this case when one instance executes a file
residing on the lower layer, the other instance denies a truncate(2) call
on this file.

This only happens for truncate(2) and not for open(2) with the O_TRUNC
flag.

Fix this interference and inconsistency by removing the preliminary
i_writecount check before copy-up.

This means that unlike on normal filesystems truncate(argv[0]) will now
succeed.  If this ever causes a regression in a real world use case this
needs to be revisited.

One way to fix this properly would be to keep a correct i_writecount in the
overlay inode, but that is difficult due to memory mapping code only
dealing with the real file/inode.

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/filesystems/overlayfs.txt | 3 +++
 fs/overlayfs/inode.c                    | 6 ------
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt
index 845d689e0fd7..69ffd8ebf3a8 100644
--- a/Documentation/filesystems/overlayfs.txt
+++ b/Documentation/filesystems/overlayfs.txt
@@ -348,6 +348,9 @@ b) If a file residing on a lower layer is opened for read-only and then
 memory mapped with MAP_SHARED, then subsequent changes to the file are not
 reflected in the memory mapping.
 
+c) If a file residing on a lower layer is being executed, then opening that
+file for write or truncating the file will not be denied with ETXTBSY.
+
 The following options allow overlayfs to act more like a standards
 compliant filesystem:
 
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index 56b55397a7a0..0486fc925002 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -29,12 +29,6 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
 		goto out;
 
 	if (attr->ia_valid & ATTR_SIZE) {
-		struct inode *realinode = d_inode(ovl_dentry_real(dentry));
-
-		err = -ETXTBSY;
-		if (atomic_read(&realinode->i_writecount) < 0)
-			goto out_drop_write;
-
 		/* Truncate should trigger data copy up as well */
 		full_copy_up = true;
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.4 18/37] scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 0f99792c01d1d6d35b86e850e9ccadd98d6f3e0c ]

The return value of transport_kmap_data_sg() is assigned to the variable
buf:

  buf = transport_kmap_data_sg(cmd);

And then it is checked:

  if (!buf) {

This indicates that buf can be NULL. However, it is dereferenced in the
following statements:

  if (!(buf[3] & 0x80))
    buf[3] |= 0x80;
  if (!(buf[2] & 0x80))
    buf[2] |= 0x80;

To fix these possible null-pointer dereferences, dereference buf and call
transport_kunmap_data_sg() only when buf is not NULL.

Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pscsi.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 55fe93296deb..17811bb07e9f 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -622,17 +622,17 @@ static void pscsi_complete_cmd(struct se_cmd *cmd, u8 scsi_status,
 			buf = transport_kmap_data_sg(cmd);
 			if (!buf) {
 				; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */
-			}
-
-			if (cdb[0] == MODE_SENSE_10) {
-				if (!(buf[3] & 0x80))
-					buf[3] |= 0x80;
 			} else {
-				if (!(buf[2] & 0x80))
-					buf[2] |= 0x80;
-			}
+				if (cdb[0] == MODE_SENSE_10) {
+					if (!(buf[3] & 0x80))
+						buf[3] |= 0x80;
+				} else {
+					if (!(buf[2] & 0x80))
+						buf[2] |= 0x80;
+				}
 
-			transport_kunmap_data_sg(cmd);
+				transport_kunmap_data_sg(cmd);
+			}
 		}
 	}
 after_mode_sense:
-- 
2.30.2

[PATCH AUTOSEL 5.4 19/37] fs: dlm: fix return -EINTR on recovery stopped

[Sasha Levin]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit aee742c9928ab4f5f4e0b00f41fb2d2cffae179e ]

This patch will return -EINTR instead of 1 if recovery is stopped. In
case of ping_members() the return value will be checked if the error is
-EINTR for signaling another recovery was triggered and the whole
recovery process will come to a clean end to process the next one.
Returning 1 will abort the recovery process and can leave the recovery
in a broken state.

It was reported with the following kernel log message attached and a gfs2
mount stopped working:

"dlm: bobvirt1: dlm_recover_members error 1"

whereas 1 was returned because of a conversion of "dlm_recovery_stopped()"
to an errno was missing which this patch will introduce. While on it all
other possible missing errno conversions at other places were added as
they are done as in other places.

It might be worth to check the error case at this recovery level,
because some of the functionality also returns -ENOBUFS and check why
recovery ends in a broken state. However this will fix the issue if
another recovery was triggered at some points of recovery handling.

Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/dir.c      | 4 +++-
 fs/dlm/member.c   | 4 +++-
 fs/dlm/recoverd.c | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/dlm/dir.c b/fs/dlm/dir.c
index 10c36ae1a8f9..45ebbe602bbf 100644
--- a/fs/dlm/dir.c
+++ b/fs/dlm/dir.c
@@ -85,8 +85,10 @@ int dlm_recover_directory(struct dlm_ls *ls)
 		for (;;) {
 			int left;
 			error = dlm_recovery_stopped(ls);
-			if (error)
+			if (error) {
+				error = -EINTR;
 				goto out_free;
+			}
 
 			error = dlm_rcom_names(ls, memb->nodeid,
 					       last_name, last_len);
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 7ad83deb4505..bbb048a03e3e 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -433,8 +433,10 @@ static int ping_members(struct dlm_ls *ls)
 
 	list_for_each_entry(memb, &ls->ls_nodes, list) {
 		error = dlm_recovery_stopped(ls);
-		if (error)
+		if (error) {
+			error = -EINTR;
 			break;
+		}
 		error = dlm_rcom_status(ls, memb->nodeid, 0);
 		if (error)
 			break;
diff --git a/fs/dlm/recoverd.c b/fs/dlm/recoverd.c
index 85e245392715..97d052cea5a9 100644
--- a/fs/dlm/recoverd.c
+++ b/fs/dlm/recoverd.c
@@ -125,8 +125,10 @@ static int ls_recover(struct dlm_ls *ls, struct dlm_recover *rv)
 	dlm_recover_waiters_pre(ls);
 
 	error = dlm_recovery_stopped(ls);
-	if (error)
+	if (error) {
+		error = -EINTR;
 		goto fail;
+	}
 
 	if (neg || dlm_no_directory(ls)) {
 		/*
-- 
2.30.2

[Cluster-devel] [PATCH AUTOSEL 5.4 19/37] fs: dlm: fix return -EINTR on recovery stopped

[Sasha Levin]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit aee742c9928ab4f5f4e0b00f41fb2d2cffae179e ]

This patch will return -EINTR instead of 1 if recovery is stopped. In
case of ping_members() the return value will be checked if the error is
-EINTR for signaling another recovery was triggered and the whole
recovery process will come to a clean end to process the next one.
Returning 1 will abort the recovery process and can leave the recovery
in a broken state.

It was reported with the following kernel log message attached and a gfs2
mount stopped working:

"dlm: bobvirt1: dlm_recover_members error 1"

whereas 1 was returned because of a conversion of "dlm_recovery_stopped()"
to an errno was missing which this patch will introduce. While on it all
other possible missing errno conversions at other places were added as
they are done as in other places.

It might be worth to check the error case at this recovery level,
because some of the functionality also returns -ENOBUFS and check why
recovery ends in a broken state. However this will fix the issue if
another recovery was triggered at some points of recovery handling.

Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/dir.c      | 4 +++-
 fs/dlm/member.c   | 4 +++-
 fs/dlm/recoverd.c | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/fs/dlm/dir.c b/fs/dlm/dir.c
index 10c36ae1a8f9..45ebbe602bbf 100644
--- a/fs/dlm/dir.c
+++ b/fs/dlm/dir.c
@@ -85,8 +85,10 @@ int dlm_recover_directory(struct dlm_ls *ls)
 		for (;;) {
 			int left;
 			error = dlm_recovery_stopped(ls);
-			if (error)
+			if (error) {
+				error = -EINTR;
 				goto out_free;
+			}
 
 			error = dlm_rcom_names(ls, memb->nodeid,
 					       last_name, last_len);
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 7ad83deb4505..bbb048a03e3e 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -433,8 +433,10 @@ static int ping_members(struct dlm_ls *ls)
 
 	list_for_each_entry(memb, &ls->ls_nodes, list) {
 		error = dlm_recovery_stopped(ls);
-		if (error)
+		if (error) {
+			error = -EINTR;
 			break;
+		}
 		error = dlm_rcom_status(ls, memb->nodeid, 0);
 		if (error)
 			break;
diff --git a/fs/dlm/recoverd.c b/fs/dlm/recoverd.c
index 85e245392715..97d052cea5a9 100644
--- a/fs/dlm/recoverd.c
+++ b/fs/dlm/recoverd.c
@@ -125,8 +125,10 @@ static int ls_recover(struct dlm_ls *ls, struct dlm_recover *rv)
 	dlm_recover_waiters_pre(ls);
 
 	error = dlm_recovery_stopped(ls);
-	if (error)
+	if (error) {
+		error = -EINTR;
 		goto fail;
+	}
 
 	if (neg || dlm_no_directory(ls)) {
 		/*
-- 
2.30.2

[PATCH AUTOSEL 5.4 20/37] HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.

[Sasha Levin]

From: Ulrich Spörlein <uqs@FreeBSD.org>

[ Upstream commit bab94e97323baefe0afccad66e776f9c78b4f521 ]

The device string on these can differ, apparently, including typos. I've
bought 2 of these in 2012 and googling shows many folks out there with
that broken spelling in their dmesg.

Signed-off-by: Ulrich Spörlein <uqs@FreeBSD.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-sony.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 2f073f536070..cdff43defe88 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -2847,7 +2847,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (!strcmp(hdev->name, "FutureMax Dance Mat"))
 		quirks |= FUTUREMAX_DANCE_MAT;
 
-	if (!strcmp(hdev->name, "SHANWAN PS3 GamePad"))
+	if (!strcmp(hdev->name, "SHANWAN PS3 GamePad") ||
+	    !strcmp(hdev->name, "ShanWan PS(R) Ga`epad"))
 		quirks |= SHANWAN_GAMEPAD;
 
 	sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
-- 
2.30.2

[PATCH AUTOSEL 5.4 21/37] MIPS: mscc: ocelot: disable all switch ports by default

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 0181f6f19c6c35b24f1516d8db22f3bbce762633 ]

The ocelot switch driver used to ignore ports which do not have a
phy-handle property and not probe those, but this is not quite ok since
it is valid to not have a phy-handle property if there is a fixed-link.

It seems that checking for a phy-handle was a proxy for the proper check
which is for the status, but that doesn't make a lot of sense, since the
ocelot driver already iterates using for_each_available_child_of_node
which skips the disabled ports, so I have no idea.

Anyway, a widespread pattern in device trees is for a SoC dtsi to
disable by default all hardware, and let board dts files enable what is
used. So let's do that and enable only the ports with a phy-handle in
the pcb120 and pcb123 device tree files.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi       | 11 +++++++++++
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts |  8 ++++++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts |  4 ++++
 3 files changed, 23 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 797d336db54d..87821b4dfa50 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -148,36 +148,47 @@ ethernet-ports {
 
 				port0: port@0 {
 					reg = <0>;
+					status = "disabled";
 				};
 				port1: port@1 {
 					reg = <1>;
+					status = "disabled";
 				};
 				port2: port@2 {
 					reg = <2>;
+					status = "disabled";
 				};
 				port3: port@3 {
 					reg = <3>;
+					status = "disabled";
 				};
 				port4: port@4 {
 					reg = <4>;
+					status = "disabled";
 				};
 				port5: port@5 {
 					reg = <5>;
+					status = "disabled";
 				};
 				port6: port@6 {
 					reg = <6>;
+					status = "disabled";
 				};
 				port7: port@7 {
 					reg = <7>;
+					status = "disabled";
 				};
 				port8: port@8 {
 					reg = <8>;
+					status = "disabled";
 				};
 				port9: port@9 {
 					reg = <9>;
+					status = "disabled";
 				};
 				port10: port@10 {
 					reg = <10>;
+					status = "disabled";
 				};
 			};
 		};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index 33991fd209f5..7da9ed2da248 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -59,40 +59,48 @@ phy4: ethernet-phy@3 {
 };
 
 &port0 {
+	status = "okay";
 	phy-handle = <&phy0>;
 };
 
 &port1 {
+	status = "okay";
 	phy-handle = <&phy1>;
 };
 
 &port2 {
+	status = "okay";
 	phy-handle = <&phy2>;
 };
 
 &port3 {
+	status = "okay";
 	phy-handle = <&phy3>;
 };
 
 &port4 {
+	status = "okay";
 	phy-handle = <&phy7>;
 	phy-mode = "sgmii";
 	phys = <&serdes 4 SERDES1G(2)>;
 };
 
 &port5 {
+	status = "okay";
 	phy-handle = <&phy4>;
 	phy-mode = "sgmii";
 	phys = <&serdes 5 SERDES1G(5)>;
 };
 
 &port6 {
+	status = "okay";
 	phy-handle = <&phy6>;
 	phy-mode = "sgmii";
 	phys = <&serdes 6 SERDES1G(3)>;
 };
 
 &port9 {
+	status = "okay";
 	phy-handle = <&phy5>;
 	phy-mode = "sgmii";
 	phys = <&serdes 9 SERDES1G(4)>;
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index ef852f382da8..7d7e638791dd 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -47,17 +47,21 @@ &mdio0 {
 };
 
 &port0 {
+	status = "okay";
 	phy-handle = <&phy0>;
 };
 
 &port1 {
+	status = "okay";
 	phy-handle = <&phy1>;
 };
 
 &port2 {
+	status = "okay";
 	phy-handle = <&phy2>;
 };
 
 &port3 {
+	status = "okay";
 	phy-handle = <&phy3>;
 };
-- 
2.30.2

[PATCH AUTOSEL 5.4 22/37] MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit eba54cbb92d28b4f6dc1ed5f73f5187b09d82c08 ]

The ocelot driver was converted to phylink, and that expects a valid
phy_interface_t. Without a phy-mode, of_get_phy_mode returns
PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that.

The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as
PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we
should fix the device trees and specify the phy-mode too.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 4 ++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index 7da9ed2da248..8555fe3e9517 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -61,21 +61,25 @@ phy4: ethernet-phy@3 {
 &port0 {
 	status = "okay";
 	phy-handle = <&phy0>;
+	phy-mode = "internal";
 };
 
 &port1 {
 	status = "okay";
 	phy-handle = <&phy1>;
+	phy-mode = "internal";
 };
 
 &port2 {
 	status = "okay";
 	phy-handle = <&phy2>;
+	phy-mode = "internal";
 };
 
 &port3 {
 	status = "okay";
 	phy-handle = <&phy3>;
+	phy-mode = "internal";
 };
 
 &port4 {
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 7d7e638791dd..0185045c7630 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -49,19 +49,23 @@ &mdio0 {
 &port0 {
 	status = "okay";
 	phy-handle = <&phy0>;
+	phy-mode = "internal";
 };
 
 &port1 {
 	status = "okay";
 	phy-handle = <&phy1>;
+	phy-mode = "internal";
 };
 
 &port2 {
 	status = "okay";
 	phy-handle = <&phy2>;
+	phy-mode = "internal";
 };
 
 &port3 {
 	status = "okay";
 	phy-handle = <&phy3>;
+	phy-mode = "internal";
 };
-- 
2.30.2

Re: [PATCH AUTOSEL 5.4 22/37] MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports

[Vladimir Oltean]

Hi Sasha,

On Thu, Sep 09, 2021 at 08:21:27PM -0400, Sasha Levin wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> [ Upstream commit eba54cbb92d28b4f6dc1ed5f73f5187b09d82c08 ]
> 
> The ocelot driver was converted to phylink, and that expects a valid
> phy_interface_t. Without a phy-mode, of_get_phy_mode returns
> PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that.
> 
> The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as
> PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we
> should fix the device trees and specify the phy-mode too.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---

Could you please drop this patch?

As discussed here, I did not bother to patch the ocelot switch driver on
stable kernels to support the new device tree binding too:
https://lore.kernel.org/lkml/YR6b15zKkjWFoM1X@piout.net/

So backporting the device tree change would break the old driver.

[PATCH AUTOSEL 5.4 23/37] scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build rule

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 98079418c53fff5f9e2d4087f08eaff2a9ce7714 ]

Add FORCE so that if_changed can detect the command line change.
scsi_devinfo_tbl.c must be added to 'targets' too.

Link: https://lore.kernel.org/r/20210819012339.709409-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/Makefile | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index c00e3dd57990..7ac42eaa6250 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -183,7 +183,7 @@ CFLAGS_ncr53c8xx.o	:= $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
 zalon7xx-objs	:= zalon.o ncr53c8xx.o
 
 # Files generated that shall be removed upon make clean
-clean-files :=	53c700_d.h 53c700_u.h scsi_devinfo_tbl.c
+clean-files :=	53c700_d.h 53c700_u.h
 
 $(obj)/53c700.o: $(obj)/53c700_d.h
 
@@ -192,9 +192,11 @@ $(obj)/scsi_sysfs.o: $(obj)/scsi_devinfo_tbl.c
 quiet_cmd_bflags = GEN     $@
 	cmd_bflags = sed -n 's/.*define *BLIST_\([A-Z0-9_]*\) *.*/BLIST_FLAG_NAME(\1),/p' $< > $@
 
-$(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h
+$(obj)/scsi_devinfo_tbl.c: include/scsi/scsi_devinfo.h FORCE
 	$(call if_changed,bflags)
 
+targets +=  scsi_devinfo_tbl.c
+
 # If you want to play with the firmware, uncomment
 # GENERATE_FIRMWARE := 1
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 24/37] powerpc/32: indirect function call use bctrl rather than blrl in ret_from_kernel_thread

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 113ec9ccc8049c3772f0eab46b62c5d6654c09f7 ]

Copied from commit 89bbe4c798bc ("powerpc/64: indirect function call
use bctrl rather than blrl in ret_from_kernel_thread")

blrl is not recommended to use as an indirect function call, as it may
corrupt the link stack predictor.

This is not a performance critical path but this should be fixed for
consistency.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91b1d242525307ceceec7ef6e832bfbacdd4501b.1629436472.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/entry_32.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index c72894ff9d61..09ef46e5690b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -485,10 +485,10 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
-	mtlr	r14
+	mtctr	r14
 	mr	r3,r15
 	PPC440EP_ERR42
-	blrl
+	bctrl
 	li	r3,0
 	b	ret_from_syscall
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 24/37] powerpc/32: indirect function call use bctrl rather than blrl in ret_from_kernel_thread

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 113ec9ccc8049c3772f0eab46b62c5d6654c09f7 ]

Copied from commit 89bbe4c798bc ("powerpc/64: indirect function call
use bctrl rather than blrl in ret_from_kernel_thread")

blrl is not recommended to use as an indirect function call, as it may
corrupt the link stack predictor.

This is not a performance critical path but this should be fixed for
consistency.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91b1d242525307ceceec7ef6e832bfbacdd4501b.1629436472.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/entry_32.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index c72894ff9d61..09ef46e5690b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -485,10 +485,10 @@ ret_from_fork:
 ret_from_kernel_thread:
 	REST_NVGPRS(r1)
 	bl	schedule_tail
-	mtlr	r14
+	mtctr	r14
 	mr	r3,r15
 	PPC440EP_ERR42
-	blrl
+	bctrl
 	li	r3,0
 	b	ret_from_syscall
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 25/37] powerpc/booke: Avoid link stack corruption in several places

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit f5007dbf4da729baa850b33a64dc3cc53757bdf8 ]

Use bcl 20,31,+4 instead of bl in order to preserve link stack.

See commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption
in __get_datapage()") for details.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e9fbc285eceb720e6c0e032ef47fe8b05f669b48.1629791751.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/ppc_asm.h            | 2 +-
 arch/powerpc/kernel/exceptions-64e.S          | 6 +++---
 arch/powerpc/kernel/fsl_booke_entry_mapping.S | 8 ++++----
 arch/powerpc/kernel/head_44x.S                | 6 +++---
 arch/powerpc/kernel/head_fsl_booke.S          | 6 +++---
 arch/powerpc/mm/nohash/tlb_low.S              | 4 ++--
 6 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 6b03dff61a05..8a0efc3fe1cd 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -306,7 +306,7 @@ GLUE(.,name):
 
 /* Be careful, this will clobber the lr register. */
 #define LOAD_REG_ADDR_PIC(reg, name)		\
-	bl	0f;				\
+	bcl	20,31,$+4;			\
 0:	mflr	reg;				\
 	addis	reg,reg,(name - 0b)@ha;		\
 	addi	reg,reg,(name - 0b)@l;
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 829950b96d29..bb89efecf282 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1245,7 +1245,7 @@ found_iprot:
  * r3 = MAS0_TLBSEL (for the iprot array)
  * r4 = SPRN_TLBnCFG
  */
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4			/* Find our address */
 invstr:	mflr	r6				/* Make it accessible */
 	mfmsr	r7
 	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
@@ -1314,7 +1314,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mfmsr	r6
 	xori	r6,r6,MSR_IS
 	mtspr	SPRN_SRR1,r6
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r6
 	addi	r6,r6,(2f - 1b)
 	mtspr	SPRN_SRR0,r6
@@ -1384,7 +1384,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
  * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
  */
 	/* Now we branch the new virtual address mapped by this entry */
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r6
 	addi	r6,r6,(2f - 1b)
 	tovirt(r6,r6)
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index ea065282b303..26fab16cdb6e 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 
 /* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4				/* Find our address */
 invstr:	mflr	r6				/* Make it accessible */
 	mfmsr	r7
 	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
@@ -85,7 +85,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	addi	r6,r6,10
 	slw	r6,r8,r6	/* convert to mask */
 
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r7
 
 	mfspr	r8,SPRN_MAS3
@@ -117,7 +117,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 
 	xori	r6,r4,1
 	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r9
 	rlwimi	r7,r9,0,20,31
 	addi	r7,r7,(2f - 1b)
@@ -218,7 +218,7 @@ next_tlb_setup:
 
 	lis	r7,MSR_KERNEL@h
 	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
+	bcl	20,31,$+4		/* Find our address */
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
 	addi	r6,r6,(2f - 1b)
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 51dd01a27314..a9655536ffba 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -70,7 +70,7 @@ _ENTRY(_start);
  * address.
  * r21 will be loaded with the physical runtime address of _stext
  */
-	bl	0f				/* Get our runtime address */
+	bcl	20,31,$+4			/* Get our runtime address */
 0:	mflr	r21				/* Make it accessible */
 	addis	r21,r21,(_stext - 0b)@ha
 	addi	r21,r21,(_stext - 0b)@l 	/* Get our current runtime base */
@@ -861,7 +861,7 @@ _GLOBAL(init_cpu_state)
 wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
 	sync
 
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4			/* Find our address */
 invstr:	mflr	r5				/* Make it accessible */
 	tlbsx	r23,0,r5			/* Find entry we are in */
 	li	r4,0				/* Start at TLB entry 0 */
@@ -1053,7 +1053,7 @@ head_start_47x:
 	sync
 
 	/* Find the entry we are running from */
-	bl	1f
+	bcl	20,31,$+4
 1:	mflr	r23
 	tlbsx	r23,0,r23
 	tlbre	r24,r23,0
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 519d49547e2f..f18174ee5084 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -79,7 +79,7 @@ _ENTRY(_start);
 	mr	r23,r3
 	mr	r25,r4
 
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r8
 	addis	r3,r8,(is_second_reloc - 0b)@ha
 	lwz	r19,(is_second_reloc - 0b)@l(r3)
@@ -1139,7 +1139,7 @@ _GLOBAL(switch_to_as1)
 	bne	1b
 
 	/* Get the tlb entry used by the current running code */
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r4
 	tlbsx	0,r4
 
@@ -1173,7 +1173,7 @@ _GLOBAL(switch_to_as1)
 _GLOBAL(restore_to_as0)
 	mflr	r0
 
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r9
 	addi	r9,r9,1f - 0b
 
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index eaeee402f96e..f849f26bfbfb 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -214,7 +214,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_476_DD2)
  * Touch enough instruction cache lines to ensure cache hits
  */
 1:	mflr	r9
-	bl	2f
+	bcl	20,31,$+4
 2:	mflr	r6
 	li	r7,32
 	PPC_ICBT(0,R6,R7)		/* touch next cache line */
@@ -442,7 +442,7 @@ _GLOBAL(loadcam_multi)
 	 * Set up temporary TLB entry that is the same as what we're
 	 * running from, but in AS=1.
 	 */
-	bl	1f
+	bcl	20,31,$+4
 1:	mflr	r6
 	tlbsx	0,r8
 	mfspr	r6,SPRN_MAS1
-- 
2.30.2

[PATCH AUTOSEL 5.4 25/37] powerpc/booke: Avoid link stack corruption in several places

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit f5007dbf4da729baa850b33a64dc3cc53757bdf8 ]

Use bcl 20,31,+4 instead of bl in order to preserve link stack.

See commit c974809a26a1 ("powerpc/vdso: Avoid link stack corruption
in __get_datapage()") for details.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e9fbc285eceb720e6c0e032ef47fe8b05f669b48.1629791751.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/ppc_asm.h            | 2 +-
 arch/powerpc/kernel/exceptions-64e.S          | 6 +++---
 arch/powerpc/kernel/fsl_booke_entry_mapping.S | 8 ++++----
 arch/powerpc/kernel/head_44x.S                | 6 +++---
 arch/powerpc/kernel/head_fsl_booke.S          | 6 +++---
 arch/powerpc/mm/nohash/tlb_low.S              | 4 ++--
 6 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 6b03dff61a05..8a0efc3fe1cd 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -306,7 +306,7 @@ GLUE(.,name):
 
 /* Be careful, this will clobber the lr register. */
 #define LOAD_REG_ADDR_PIC(reg, name)		\
-	bl	0f;				\
+	bcl	20,31,$+4;			\
 0:	mflr	reg;				\
 	addis	reg,reg,(name - 0b)@ha;		\
 	addi	reg,reg,(name - 0b)@l;
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 829950b96d29..bb89efecf282 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1245,7 +1245,7 @@ found_iprot:
  * r3 = MAS0_TLBSEL (for the iprot array)
  * r4 = SPRN_TLBnCFG
  */
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4			/* Find our address */
 invstr:	mflr	r6				/* Make it accessible */
 	mfmsr	r7
 	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
@@ -1314,7 +1314,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mfmsr	r6
 	xori	r6,r6,MSR_IS
 	mtspr	SPRN_SRR1,r6
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r6
 	addi	r6,r6,(2f - 1b)
 	mtspr	SPRN_SRR0,r6
@@ -1384,7 +1384,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
  * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
  */
 	/* Now we branch the new virtual address mapped by this entry */
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r6
 	addi	r6,r6,(2f - 1b)
 	tovirt(r6,r6)
diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
index ea065282b303..26fab16cdb6e 100644
--- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S
+++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 
 /* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4				/* Find our address */
 invstr:	mflr	r6				/* Make it accessible */
 	mfmsr	r7
 	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
@@ -85,7 +85,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	addi	r6,r6,10
 	slw	r6,r8,r6	/* convert to mask */
 
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r7
 
 	mfspr	r8,SPRN_MAS3
@@ -117,7 +117,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 
 	xori	r6,r4,1
 	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
+	bcl	20,31,$+4	/* Find our address */
 1:	mflr	r9
 	rlwimi	r7,r9,0,20,31
 	addi	r7,r7,(2f - 1b)
@@ -218,7 +218,7 @@ next_tlb_setup:
 
 	lis	r7,MSR_KERNEL@h
 	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
+	bcl	20,31,$+4		/* Find our address */
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
 	addi	r6,r6,(2f - 1b)
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 51dd01a27314..a9655536ffba 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -70,7 +70,7 @@ _ENTRY(_start);
  * address.
  * r21 will be loaded with the physical runtime address of _stext
  */
-	bl	0f				/* Get our runtime address */
+	bcl	20,31,$+4			/* Get our runtime address */
 0:	mflr	r21				/* Make it accessible */
 	addis	r21,r21,(_stext - 0b)@ha
 	addi	r21,r21,(_stext - 0b)@l 	/* Get our current runtime base */
@@ -861,7 +861,7 @@ _GLOBAL(init_cpu_state)
 wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
 	sync
 
-	bl	invstr				/* Find our address */
+	bcl	20,31,$+4			/* Find our address */
 invstr:	mflr	r5				/* Make it accessible */
 	tlbsx	r23,0,r5			/* Find entry we are in */
 	li	r4,0				/* Start at TLB entry 0 */
@@ -1053,7 +1053,7 @@ head_start_47x:
 	sync
 
 	/* Find the entry we are running from */
-	bl	1f
+	bcl	20,31,$+4
 1:	mflr	r23
 	tlbsx	r23,0,r23
 	tlbre	r24,r23,0
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 519d49547e2f..f18174ee5084 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -79,7 +79,7 @@ _ENTRY(_start);
 	mr	r23,r3
 	mr	r25,r4
 
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r8
 	addis	r3,r8,(is_second_reloc - 0b)@ha
 	lwz	r19,(is_second_reloc - 0b)@l(r3)
@@ -1139,7 +1139,7 @@ _GLOBAL(switch_to_as1)
 	bne	1b
 
 	/* Get the tlb entry used by the current running code */
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r4
 	tlbsx	0,r4
 
@@ -1173,7 +1173,7 @@ _GLOBAL(switch_to_as1)
 _GLOBAL(restore_to_as0)
 	mflr	r0
 
-	bl	0f
+	bcl	20,31,$+4
 0:	mflr	r9
 	addi	r9,r9,1f - 0b
 
diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index eaeee402f96e..f849f26bfbfb 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -214,7 +214,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_476_DD2)
  * Touch enough instruction cache lines to ensure cache hits
  */
 1:	mflr	r9
-	bl	2f
+	bcl	20,31,$+4
 2:	mflr	r6
 	li	r7,32
 	PPC_ICBT(0,R6,R7)		/* touch next cache line */
@@ -442,7 +442,7 @@ _GLOBAL(loadcam_multi)
 	 * Set up temporary TLB entry that is the same as what we're
 	 * running from, but in AS=1.
 	 */
-	bl	1f
+	bcl	20,31,$+4
 1:	mflr	r6
 	tlbsx	0,r8
 	mfspr	r6,SPRN_MAS1
-- 
2.30.2

[PATCH AUTOSEL 5.4 26/37] KVM: PPC: Book3S HV: Initialise vcpu MSR with MSR_ME

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit fd42b7b09c602c904452c0c3e5955ca21d8e387a ]

It is possible to create a VCPU without setting the MSR before running
it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is
not set. This is pretty harmless because the MSR_ME bit is added to
HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it.

Initialise the vcpu MSR with MSR_ME set.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index dc897dff8eb9..4718313eddc9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2293,6 +2293,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	spin_lock_init(&vcpu->arch.vpa_update_lock);
 	spin_lock_init(&vcpu->arch.tbacct_lock);
 	vcpu->arch.busy_preempt = TB_NIL;
+	vcpu->arch.shregs.msr = MSR_ME;
 	vcpu->arch.intr_msr = MSR_SF | MSR_ME;
 
 	/*
-- 
2.30.2

[PATCH AUTOSEL 5.4 26/37] KVM: PPC: Book3S HV: Initialise vcpu MSR with MSR_ME

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit fd42b7b09c602c904452c0c3e5955ca21d8e387a ]

It is possible to create a VCPU without setting the MSR before running
it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is
not set. This is pretty harmless because the MSR_ME bit is added to
HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it.

Initialise the vcpu MSR with MSR_ME set.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index dc897dff8eb9..4718313eddc9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2293,6 +2293,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	spin_lock_init(&vcpu->arch.vpa_update_lock);
 	spin_lock_init(&vcpu->arch.tbacct_lock);
 	vcpu->arch.busy_preempt = TB_NIL;
+	vcpu->arch.shregs.msr = MSR_ME;
 	vcpu->arch.intr_msr = MSR_SF | MSR_ME;
 
 	/*
-- 
2.30.2

[PATCH AUTOSEL 5.4 26/37] KVM: PPC: Book3S HV: Initialise vcpu MSR with MSR_ME

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit fd42b7b09c602c904452c0c3e5955ca21d8e387a ]

It is possible to create a VCPU without setting the MSR before running
it, which results in a warning in kvmhv_vcpu_entry_p9() that MSR_ME is
not set. This is pretty harmless because the MSR_ME bit is added to
HSRR1 before HRFID to guest, and a normal qemu guest doesn't hit it.

Initialise the vcpu MSR with MSR_ME set.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index dc897dff8eb9..4718313eddc9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2293,6 +2293,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	spin_lock_init(&vcpu->arch.vpa_update_lock);
 	spin_lock_init(&vcpu->arch.tbacct_lock);
 	vcpu->arch.busy_preempt = TB_NIL;
+	vcpu->arch.shregs.msr = MSR_ME;
 	vcpu->arch.intr_msr = MSR_SF | MSR_ME;
 
 	/*
-- 
2.30.2

[PATCH AUTOSEL 5.4 27/37] KVM: PPC: Book3S HV P9: Fixes for TM softpatch interrupt NIP

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 4782e0cd0d184d727ad3b0cfe20d1d44d9f98239 ]

The softpatch interrupt sets HSRR0 to the faulting instruction +4, so
it should subtract 4 for the faulting instruction address in the case
it is a TM softpatch interrupt (the instruction was not executed) and
it was not emulated.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_tm.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index cc90b8b82329..e7c36f8bf205 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -46,6 +46,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	u64 newmsr, bescr;
 	int ra, rs;
 
+	/*
+	 * The TM softpatch interrupt sets NIP to the instruction following
+	 * the faulting instruction, which is not executed. Rewind nip to the
+	 * faulting instruction so it looks like a normal synchronous
+	 * interrupt, then update nip in the places where the instruction is
+	 * emulated.
+	 */
+	vcpu->arch.regs.nip -= 4;
+
 	/*
 	 * rfid, rfebb, and mtmsrd encode bit 31 = 0 since it's a reserved bit
 	 * in these instructions, so masking bit 31 out doesn't change these
@@ -67,7 +76,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 			       (newmsr & MSR_TM)));
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.shregs.srr0;
 		return RESUME_GUEST;
 
@@ -100,7 +109,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.bescr = bescr;
 		msr = (msr & ~MSR_TS_MASK) | MSR_TS_T;
 		vcpu->arch.shregs.msr = msr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.ebbrr;
 		return RESUME_GUEST;
 
@@ -116,6 +125,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		newmsr = (newmsr & ~MSR_LE) | (msr & MSR_LE);
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -152,6 +162,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 				msr = (msr & ~MSR_TS_MASK) | MSR_TS_S;
 		}
 		vcpu->arch.shregs.msr = msr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -189,6 +200,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -220,6 +232,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr = msr | MSR_TS_S;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 27/37] KVM: PPC: Book3S HV P9: Fixes for TM softpatch interrupt NIP

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 4782e0cd0d184d727ad3b0cfe20d1d44d9f98239 ]

The softpatch interrupt sets HSRR0 to the faulting instruction +4, so
it should subtract 4 for the faulting instruction address in the case
it is a TM softpatch interrupt (the instruction was not executed) and
it was not emulated.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_tm.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index cc90b8b82329..e7c36f8bf205 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -46,6 +46,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	u64 newmsr, bescr;
 	int ra, rs;
 
+	/*
+	 * The TM softpatch interrupt sets NIP to the instruction following
+	 * the faulting instruction, which is not executed. Rewind nip to the
+	 * faulting instruction so it looks like a normal synchronous
+	 * interrupt, then update nip in the places where the instruction is
+	 * emulated.
+	 */
+	vcpu->arch.regs.nip -= 4;
+
 	/*
 	 * rfid, rfebb, and mtmsrd encode bit 31 = 0 since it's a reserved bit
 	 * in these instructions, so masking bit 31 out doesn't change these
@@ -67,7 +76,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 			       (newmsr & MSR_TM)));
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.shregs.srr0;
 		return RESUME_GUEST;
 
@@ -100,7 +109,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.bescr = bescr;
 		msr = (msr & ~MSR_TS_MASK) | MSR_TS_T;
 		vcpu->arch.shregs.msr = msr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.ebbrr;
 		return RESUME_GUEST;
 
@@ -116,6 +125,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		newmsr = (newmsr & ~MSR_LE) | (msr & MSR_LE);
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -152,6 +162,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 				msr = (msr & ~MSR_TS_MASK) | MSR_TS_S;
 		}
 		vcpu->arch.shregs.msr = msr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -189,6 +200,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -220,6 +232,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr = msr | MSR_TS_S;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 27/37] KVM: PPC: Book3S HV P9: Fixes for TM softpatch interrupt NIP

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 4782e0cd0d184d727ad3b0cfe20d1d44d9f98239 ]

The softpatch interrupt sets HSRR0 to the faulting instruction +4, so
it should subtract 4 for the faulting instruction address in the case
it is a TM softpatch interrupt (the instruction was not executed) and
it was not emulated.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_tm.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index cc90b8b82329..e7c36f8bf205 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -46,6 +46,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	u64 newmsr, bescr;
 	int ra, rs;
 
+	/*
+	 * The TM softpatch interrupt sets NIP to the instruction following
+	 * the faulting instruction, which is not executed. Rewind nip to the
+	 * faulting instruction so it looks like a normal synchronous
+	 * interrupt, then update nip in the places where the instruction is
+	 * emulated.
+	 */
+	vcpu->arch.regs.nip -= 4;
+
 	/*
 	 * rfid, rfebb, and mtmsrd encode bit 31 = 0 since it's a reserved bit
 	 * in these instructions, so masking bit 31 out doesn't change these
@@ -67,7 +76,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 			       (newmsr & MSR_TM)));
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.shregs.srr0;
 		return RESUME_GUEST;
 
@@ -100,7 +109,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.bescr = bescr;
 		msr = (msr & ~MSR_TS_MASK) | MSR_TS_T;
 		vcpu->arch.shregs.msr = msr;
-		vcpu->arch.cfar = vcpu->arch.regs.nip - 4;
+		vcpu->arch.cfar = vcpu->arch.regs.nip;
 		vcpu->arch.regs.nip = vcpu->arch.ebbrr;
 		return RESUME_GUEST;
 
@@ -116,6 +125,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		newmsr = (newmsr & ~MSR_LE) | (msr & MSR_LE);
 		newmsr = sanitize_msr(newmsr);
 		vcpu->arch.shregs.msr = newmsr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -152,6 +162,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 				msr = (msr & ~MSR_TS_MASK) | MSR_TS_S;
 		}
 		vcpu->arch.shregs.msr = msr;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -189,6 +200,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 
 	/* ignore bit 31, see comment above */
@@ -220,6 +232,7 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.regs.ccr = (vcpu->arch.regs.ccr & 0x0fffffff) |
 			(((msr & MSR_TS_MASK) >> MSR_TS_S_LG) << 29);
 		vcpu->arch.shregs.msr = msr | MSR_TS_S;
+		vcpu->arch.regs.nip += 4;
 		return RESUME_GUEST;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 28/37] KVM: PPC: Book3S HV Nested: Fix TM softpatch HFAC interrupt emulation

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit d82b392d9b3556b63e3f9916cf057ea847e173a9 ]

Have the TM softpatch emulation code set up the HFAC interrupt and
return -1 in case an instruction was executed with HFSCR bits clear,
and have the interrupt exit handler fall through to the HFAC handler.
When the L0 is running a nested guest, this ensures the HFAC interrupt
is correctly passed up to the L1.

The "direct guest" exit handler will turn these into PROGILL program
interrupts so functionality in practice will be unchanged. But it's
possible an L1 would want to handle these in a different way.

Also rearrange the FAC interrupt emulation code to match the HFAC format
while here (mainly, adding the FSCR_INTR_CAUSE mask).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/reg.h  |  3 ++-
 arch/powerpc/kvm/book3s_hv.c    | 35 ++++++++++++++++----------
 arch/powerpc/kvm/book3s_hv_tm.c | 44 ++++++++++++++++++---------------
 3 files changed, 48 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 34d08ff21b98..518da2f71821 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -414,6 +414,7 @@
 #define   FSCR_TAR	__MASK(FSCR_TAR_LG)
 #define   FSCR_EBB	__MASK(FSCR_EBB_LG)
 #define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
+#define   FSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
 #define   HFSCR_MSGP	__MASK(FSCR_MSGP_LG)
 #define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
@@ -424,7 +425,7 @@
 #define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
 #define   HFSCR_FP	__MASK(FSCR_FP_LG)
-#define   HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
+#define   HFSCR_INTR_CAUSE FSCR_INTR_CAUSE
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0		ASM_CONST(0x8000000000000000)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4718313eddc9..d97a40291f83 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1390,6 +1390,21 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			r = RESUME_GUEST;
 		}
 		break;
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
+		/*
+		 * This occurs for various TM-related instructions that
+		 * we need to emulate on POWER9 DD2.2.  We have already
+		 * handled the cases where the guest was in real-suspend
+		 * mode and was transitioning to transactional state.
+		 */
+		r = kvmhv_p9_tm_emulation(vcpu);
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
+#endif
+
 	/*
 	 * This occurs if the guest (kernel or userspace), does something that
 	 * is prohibited by HFSCR.
@@ -1408,18 +1423,6 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		}
 		break;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
-		/*
-		 * This occurs for various TM-related instructions that
-		 * we need to emulate on POWER9 DD2.2.  We have already
-		 * handled the cases where the guest was in real-suspend
-		 * mode and was transitioning to transactional state.
-		 */
-		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
-#endif
-
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		r = RESUME_PASSTHROUGH;
 		break;
@@ -1517,9 +1520,15 @@ static int kvmppc_handle_nested_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		 * mode and was transitioning to transactional state.
 		 */
 		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
 #endif
 
+	case BOOK3S_INTERRUPT_H_FAC_UNAVAIL:
+		r = RESUME_HOST;
+		break;
+
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		vcpu->arch.trap = 0;
 		r = RESUME_GUEST;
diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index e7c36f8bf205..866cadd70094 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -88,14 +88,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check EBB facility is available */
 		if (!(vcpu->arch.hfscr & HFSCR_EBB)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_EBB_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if ((msr & MSR_PR) && !(vcpu->arch.fscr & FSCR_EBB)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_EBB_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_EBB_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
 		}
@@ -138,14 +139,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -169,14 +171,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	case (PPC_INST_TRECLAIM & PO_XOP_OPCODE_MASK):
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -208,14 +211,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		/* XXX do we need to check for PR=0 here? */
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
-- 
2.30.2

[PATCH AUTOSEL 5.4 28/37] KVM: PPC: Book3S HV Nested: Fix TM softpatch HFAC interrupt emulation

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit d82b392d9b3556b63e3f9916cf057ea847e173a9 ]

Have the TM softpatch emulation code set up the HFAC interrupt and
return -1 in case an instruction was executed with HFSCR bits clear,
and have the interrupt exit handler fall through to the HFAC handler.
When the L0 is running a nested guest, this ensures the HFAC interrupt
is correctly passed up to the L1.

The "direct guest" exit handler will turn these into PROGILL program
interrupts so functionality in practice will be unchanged. But it's
possible an L1 would want to handle these in a different way.

Also rearrange the FAC interrupt emulation code to match the HFAC format
while here (mainly, adding the FSCR_INTR_CAUSE mask).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/reg.h  |  3 ++-
 arch/powerpc/kvm/book3s_hv.c    | 35 ++++++++++++++++----------
 arch/powerpc/kvm/book3s_hv_tm.c | 44 ++++++++++++++++++---------------
 3 files changed, 48 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 34d08ff21b98..518da2f71821 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -414,6 +414,7 @@
 #define   FSCR_TAR	__MASK(FSCR_TAR_LG)
 #define   FSCR_EBB	__MASK(FSCR_EBB_LG)
 #define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
+#define   FSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
 #define   HFSCR_MSGP	__MASK(FSCR_MSGP_LG)
 #define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
@@ -424,7 +425,7 @@
 #define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
 #define   HFSCR_FP	__MASK(FSCR_FP_LG)
-#define   HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
+#define   HFSCR_INTR_CAUSE FSCR_INTR_CAUSE
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0		ASM_CONST(0x8000000000000000)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4718313eddc9..d97a40291f83 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1390,6 +1390,21 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			r = RESUME_GUEST;
 		}
 		break;
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
+		/*
+		 * This occurs for various TM-related instructions that
+		 * we need to emulate on POWER9 DD2.2.  We have already
+		 * handled the cases where the guest was in real-suspend
+		 * mode and was transitioning to transactional state.
+		 */
+		r = kvmhv_p9_tm_emulation(vcpu);
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
+#endif
+
 	/*
 	 * This occurs if the guest (kernel or userspace), does something that
 	 * is prohibited by HFSCR.
@@ -1408,18 +1423,6 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		}
 		break;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
-		/*
-		 * This occurs for various TM-related instructions that
-		 * we need to emulate on POWER9 DD2.2.  We have already
-		 * handled the cases where the guest was in real-suspend
-		 * mode and was transitioning to transactional state.
-		 */
-		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
-#endif
-
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		r = RESUME_PASSTHROUGH;
 		break;
@@ -1517,9 +1520,15 @@ static int kvmppc_handle_nested_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		 * mode and was transitioning to transactional state.
 		 */
 		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
 #endif
 
+	case BOOK3S_INTERRUPT_H_FAC_UNAVAIL:
+		r = RESUME_HOST;
+		break;
+
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		vcpu->arch.trap = 0;
 		r = RESUME_GUEST;
diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index e7c36f8bf205..866cadd70094 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -88,14 +88,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check EBB facility is available */
 		if (!(vcpu->arch.hfscr & HFSCR_EBB)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_EBB_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if ((msr & MSR_PR) && !(vcpu->arch.fscr & FSCR_EBB)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_EBB_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_EBB_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
 		}
@@ -138,14 +139,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -169,14 +171,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	case (PPC_INST_TRECLAIM & PO_XOP_OPCODE_MASK):
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -208,14 +211,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		/* XXX do we need to check for PR=0 here? */
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
-- 
2.30.2

[PATCH AUTOSEL 5.4 28/37] KVM: PPC: Book3S HV Nested: Fix TM softpatch HFAC interrupt emulation

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit d82b392d9b3556b63e3f9916cf057ea847e173a9 ]

Have the TM softpatch emulation code set up the HFAC interrupt and
return -1 in case an instruction was executed with HFSCR bits clear,
and have the interrupt exit handler fall through to the HFAC handler.
When the L0 is running a nested guest, this ensures the HFAC interrupt
is correctly passed up to the L1.

The "direct guest" exit handler will turn these into PROGILL program
interrupts so functionality in practice will be unchanged. But it's
possible an L1 would want to handle these in a different way.

Also rearrange the FAC interrupt emulation code to match the HFAC format
while here (mainly, adding the FSCR_INTR_CAUSE mask).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210811160134.904987-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/reg.h  |  3 ++-
 arch/powerpc/kvm/book3s_hv.c    | 35 ++++++++++++++++----------
 arch/powerpc/kvm/book3s_hv_tm.c | 44 ++++++++++++++++++---------------
 3 files changed, 48 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 34d08ff21b98..518da2f71821 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -414,6 +414,7 @@
 #define   FSCR_TAR	__MASK(FSCR_TAR_LG)
 #define   FSCR_EBB	__MASK(FSCR_EBB_LG)
 #define   FSCR_DSCR	__MASK(FSCR_DSCR_LG)
+#define   FSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
 #define SPRN_HFSCR	0xbe	/* HV=1 Facility Status & Control Register */
 #define   HFSCR_MSGP	__MASK(FSCR_MSGP_LG)
 #define   HFSCR_TAR	__MASK(FSCR_TAR_LG)
@@ -424,7 +425,7 @@
 #define   HFSCR_DSCR	__MASK(FSCR_DSCR_LG)
 #define   HFSCR_VECVSX	__MASK(FSCR_VECVSX_LG)
 #define   HFSCR_FP	__MASK(FSCR_FP_LG)
-#define   HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56)	/* interrupt cause */
+#define   HFSCR_INTR_CAUSE FSCR_INTR_CAUSE
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0		ASM_CONST(0x8000000000000000)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4718313eddc9..d97a40291f83 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1390,6 +1390,21 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 			r = RESUME_GUEST;
 		}
 		break;
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
+		/*
+		 * This occurs for various TM-related instructions that
+		 * we need to emulate on POWER9 DD2.2.  We have already
+		 * handled the cases where the guest was in real-suspend
+		 * mode and was transitioning to transactional state.
+		 */
+		r = kvmhv_p9_tm_emulation(vcpu);
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
+#endif
+
 	/*
 	 * This occurs if the guest (kernel or userspace), does something that
 	 * is prohibited by HFSCR.
@@ -1408,18 +1423,6 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		}
 		break;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	case BOOK3S_INTERRUPT_HV_SOFTPATCH:
-		/*
-		 * This occurs for various TM-related instructions that
-		 * we need to emulate on POWER9 DD2.2.  We have already
-		 * handled the cases where the guest was in real-suspend
-		 * mode and was transitioning to transactional state.
-		 */
-		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
-#endif
-
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		r = RESUME_PASSTHROUGH;
 		break;
@@ -1517,9 +1520,15 @@ static int kvmppc_handle_nested_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		 * mode and was transitioning to transactional state.
 		 */
 		r = kvmhv_p9_tm_emulation(vcpu);
-		break;
+		if (r != -1)
+			break;
+		fallthrough; /* go to facility unavailable handler */
 #endif
 
+	case BOOK3S_INTERRUPT_H_FAC_UNAVAIL:
+		r = RESUME_HOST;
+		break;
+
 	case BOOK3S_INTERRUPT_HV_RM_HARD:
 		vcpu->arch.trap = 0;
 		r = RESUME_GUEST;
diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index e7c36f8bf205..866cadd70094 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -88,14 +88,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check EBB facility is available */
 		if (!(vcpu->arch.hfscr & HFSCR_EBB)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_EBB_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if ((msr & MSR_PR) && !(vcpu->arch.fscr & FSCR_EBB)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_EBB_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_EBB_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
 		}
@@ -138,14 +139,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		}
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -169,14 +171,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	case (PPC_INST_TRECLAIM & PO_XOP_OPCODE_MASK):
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
@@ -208,14 +211,15 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		/* XXX do we need to check for PR=0 here? */
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
-			/* generate an illegal instruction interrupt */
-			kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
-			return RESUME_GUEST;
+			vcpu->arch.hfscr &= ~HFSCR_INTR_CAUSE;
+			vcpu->arch.hfscr |= (u64)FSCR_TM_LG << 56;
+			vcpu->arch.trap = BOOK3S_INTERRUPT_H_FAC_UNAVAIL;
+			return -1; /* rerun host interrupt handler */
 		}
 		if (!(msr & MSR_TM)) {
 			/* generate a facility unavailable interrupt */
-			vcpu->arch.fscr = (vcpu->arch.fscr & ~(0xffull << 56)) |
-				((u64)FSCR_TM_LG << 56);
+			vcpu->arch.fscr &= ~FSCR_INTR_CAUSE;
+			vcpu->arch.fscr |= (u64)FSCR_TM_LG << 56;
 			kvmppc_book3s_queue_irqprio(vcpu,
 						BOOK3S_INTERRUPT_FAC_UNAVAIL);
 			return RESUME_GUEST;
-- 
2.30.2

[PATCH AUTOSEL 5.4 29/37] RDMA/core/sa_query: Retry SA queries

[Sasha Levin]

From: Håkon Bugge <haakon.bugge@oracle.com>

[ Upstream commit 5f5a650999d5718af766fc70a120230b04235a6f ]

A MAD packet is sent as an unreliable datagram (UD). SA requests are sent
as MAD packets. As such, SA requests or responses may be silently dropped.

IB Core's MAD layer has a timeout and retry mechanism, which amongst
other, is used by RDMA CM. But it is not used by SA queries. The lack of
retries of SA queries leads to long specified timeout, and error being
returned in case of packet loss. The ULP or user-land process has to
perform the retry.

Fix this by taking advantage of the MAD layer's retry mechanism.

First, a check against a zero timeout is added in rdma_resolve_route(). In
send_mad(), we set the MAD layer timeout to one tenth of the specified
timeout and the number of retries to 10. The special case when timeout is
less than 10 is handled.

With this fix:

 # ucmatose -c 1000 -S 1024 -C 1

runs stable on an Infiniband fabric. Without this fix, we see an
intermittent behavior and it errors out with:

cmatose: event: RDMA_CM_EVENT_ROUTE_ERROR, error: -110

(110 is ETIMEDOUT)

Link: https://lore.kernel.org/r/1628784755-28316-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c      | 3 +++
 drivers/infiniband/core/sa_query.c | 9 ++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index ec9e9598894f..261d284e5ff3 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2937,6 +2937,9 @@ int rdma_resolve_route(struct rdma_cm_id *id, unsigned long timeout_ms)
 	struct rdma_id_private *id_priv;
 	int ret;
 
+	if (!timeout_ms)
+		return -EINVAL;
+
 	id_priv = container_of(id, struct rdma_id_private, id);
 	if (!cma_comp_exch(id_priv, RDMA_CM_ADDR_RESOLVED, RDMA_CM_ROUTE_QUERY))
 		return -EINVAL;
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index d2d70c89193f..8c0ff50cbcfc 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -1360,6 +1360,7 @@ static int send_mad(struct ib_sa_query *query, unsigned long timeout_ms,
 {
 	unsigned long flags;
 	int ret, id;
+	const int nmbr_sa_query_retries = 10;
 
 	xa_lock_irqsave(&queries, flags);
 	ret = __xa_alloc(&queries, &id, query, xa_limit_32b, gfp_mask);
@@ -1367,7 +1368,13 @@ static int send_mad(struct ib_sa_query *query, unsigned long timeout_ms,
 	if (ret < 0)
 		return ret;
 
-	query->mad_buf->timeout_ms  = timeout_ms;
+	query->mad_buf->timeout_ms  = timeout_ms / nmbr_sa_query_retries;
+	query->mad_buf->retries = nmbr_sa_query_retries;
+	if (!query->mad_buf->timeout_ms) {
+		/* Special case, very small timeout_ms */
+		query->mad_buf->timeout_ms = 1;
+		query->mad_buf->retries = timeout_ms;
+	}
 	query->mad_buf->context[0] = query;
 	query->id = id;
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 30/37] platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit fb49d9946f96081f9a05d8f305b3f40285afe4a9 ]

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.

Since all the size checking has already happened, use input.pointer
(void *) so memcpy() doesn't get confused about how much is being
written.

Avoids this false-positive warning when run-time memcpy() strict
bounds checking is enabled:

memcpy: detected field-spanning write (size 4096) of single field (size 36)
WARNING: CPU: 0 PID: 357 at drivers/platform/x86/dell/dell-smbios-wmi.c:74 run_smbios_call+0x110/0x1e0 [dell_smbios]

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210825160749.3891090-1-keescook@chromium.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/dell-smbios-wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell-smbios-wmi.c
index c97bd4a45242..32e8c4715d53 100644
--- a/drivers/platform/x86/dell-smbios-wmi.c
+++ b/drivers/platform/x86/dell-smbios-wmi.c
@@ -71,7 +71,7 @@ static int run_smbios_call(struct wmi_device *wdev)
 				obj->integer.value);
 		return -EIO;
 	}
-	memcpy(&priv->buf->std, obj->buffer.pointer, obj->buffer.length);
+	memcpy(input.pointer, obj->buffer.pointer, obj->buffer.length);
 	dev_dbg(&wdev->dev, "result: [%08x,%08x,%08x,%08x]\n",
 		priv->buf->std.output[0], priv->buf->std.output[1],
 		priv->buf->std.output[2], priv->buf->std.output[3]);
-- 
2.30.2

[PATCH AUTOSEL 5.4 31/37] clk: zynqmp: Fix a memory leak

[Sasha Levin]

From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

[ Upstream commit e7296d16ef7be11a6001be9bd89906ef55ab2405 ]

Fix a memory leak of mux.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20210818065929.12835-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/zynqmp/clk-mux-zynqmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
index 0af8f74c5fa5..d6a00e4074e2 100644
--- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -132,7 +132,7 @@ struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
 	hw = &mux->hw;
 	ret = clk_hw_register(NULL, hw);
 	if (ret) {
-		kfree(hw);
+		kfree(mux);
 		hw = ERR_PTR(ret);
 	}
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 31/37] clk: zynqmp: Fix a memory leak

[Sasha Levin]

From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>

[ Upstream commit e7296d16ef7be11a6001be9bd89906ef55ab2405 ]

Fix a memory leak of mux.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20210818065929.12835-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/zynqmp/clk-mux-zynqmp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
index 0af8f74c5fa5..d6a00e4074e2 100644
--- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -132,7 +132,7 @@ struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
 	hw = &mux->hw;
 	ret = clk_hw_register(NULL, hw);
 	if (ret) {
-		kfree(hw);
+		kfree(mux);
 		hw = ERR_PTR(ret);
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.4 32/37] ext4: if zeroout fails fall back to splitting the extent node

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit 308c57ccf4318236be75dfa251c84713e694457b ]

If the underlying storage device is using thin-provisioning, it's
possible for a zeroout operation to return ENOSPC.

Commit df22291ff0fd ("ext4: Retry block allocation if we have free blocks
left") added logic to retry block allocation since we might get free block
after we commit a transaction. But the ENOSPC from thin-provisioning
will confuse ext4, and lead to an infinite loop.

Since using zeroout instead of splitting the extent node is an
optimization, if it fails, we might as well fall back to splitting the
extent node.

Reported-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/extents.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index ae73e6793683..4136aafd9b7f 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3740,7 +3740,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 				split_map.m_len - ee_block);
 			err = ext4_ext_zeroout(inode, &zero_ex1);
 			if (err)
-				goto out;
+				goto fallback;
 			split_map.m_len = allocated;
 		}
 		if (split_map.m_lblk - ee_block + split_map.m_len <
@@ -3754,7 +3754,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 						      ext4_ext_pblock(ex));
 				err = ext4_ext_zeroout(inode, &zero_ex2);
 				if (err)
-					goto out;
+					goto fallback;
 			}
 
 			split_map.m_len += split_map.m_lblk - ee_block;
@@ -3763,6 +3763,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle,
 		}
 	}
 
+fallback:
 	err = ext4_split_extent(handle, inode, ppath, &split_map, split_flag,
 				flags);
 	if (err > 0)
-- 
2.30.2

[PATCH AUTOSEL 5.4 33/37] ext4: Make sure quota files are not grabbed accidentally

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit bd2c38cf1726ea913024393a0d11f2e2a3f4c180 ]

If ext4 filesystem is corrupted so that quota files are linked from
directory hirerarchy, bad things can happen. E.g. quota files can get
corrupted or deleted. Make sure we are not grabbing quota file inodes
when we expect normal inodes.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210812133122.26360-1-jack@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 1429d01d836b..746ec988e016 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4846,6 +4846,7 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 	struct ext4_iloc iloc;
 	struct ext4_inode *raw_inode;
 	struct ext4_inode_info *ei;
+	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 	struct inode *inode;
 	journal_t *journal = EXT4_SB(sb)->s_journal;
 	long ret;
@@ -4856,9 +4857,12 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 	projid_t i_projid;
 
 	if ((!(flags & EXT4_IGET_SPECIAL) &&
-	     (ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO)) ||
+	     ((ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO) ||
+	      ino == le32_to_cpu(es->s_usr_quota_inum) ||
+	      ino == le32_to_cpu(es->s_grp_quota_inum) ||
+	      ino == le32_to_cpu(es->s_prj_quota_inum))) ||
 	    (ino < EXT4_ROOT_INO) ||
-	    (ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count))) {
+	    (ino > le32_to_cpu(es->s_inodes_count))) {
 		if (flags & EXT4_IGET_HANDLE)
 			return ERR_PTR(-ESTALE);
 		__ext4_error(sb, function, line,
-- 
2.30.2

[PATCH AUTOSEL 5.4 34/37] xen: remove stray preempt_disable() from PV AP startup code

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 58e636039b512697554b579c2bb23774061877f5 ]

In cpu_bringup() there is a call of preempt_disable() without a paired
preempt_enable(). This is not needed as interrupts are off initially.
Additionally this will result in early boot messages like:

BUG: scheduling while atomic: swapper/1/0/0x00000002

Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210825113158.11716-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/smp_pv.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 0cebe5db691d..b87c6403b5bd 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -61,7 +61,6 @@ static void cpu_bringup(void)
 	cr4_init();
 	cpu_init();
 	touch_softlockup_watchdog();
-	preempt_disable();
 
 	/* PVH runs in ring 0 and allows us to do native syscalls. Yay! */
 	if (!xen_feature(XENFEAT_supervisor_mode_kernel)) {
-- 
2.30.2

[PATCH AUTOSEL 5.4 35/37] checkkconfigsymbols.py: Fix the '--ignore' option

[Sasha Levin]

From: Ariel Marcovitch <arielmarcovitch@gmail.com>

[ Upstream commit 1439ebd2ce77242400518d4e6a1e85bebcd8084f ]

It seems like the implementation of the --ignore option is broken.

In check_symbols_helper, when going through the list of files, a file is
added to the list of source files to check if it matches the ignore
pattern. Instead, as stated in the comment below this condition, the
file should be added if it doesn't match the pattern.

This means that when providing an ignore pattern, the only files that
will be checked will be the ones we want the ignore, in addition to the
Kconfig files that don't match the pattern (the check in
parse_kconfig_files is done right)

Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/checkkconfigsymbols.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkkconfigsymbols.py b/scripts/checkkconfigsymbols.py
index 00a10a293f4f..4393955493fd 100755
--- a/scripts/checkkconfigsymbols.py
+++ b/scripts/checkkconfigsymbols.py
@@ -329,7 +329,7 @@ def check_symbols_helper(pool, ignore):
         if REGEX_FILE_KCONFIG.match(gitfile):
             kconfig_files.append(gitfile)
         else:
-            if ignore and not re.match(ignore, gitfile):
+            if ignore and re.match(ignore, gitfile):
                 continue
             # add source files that do not match the ignore pattern
             source_files.append(gitfile)
-- 
2.30.2

[Ocfs2-devel] [PATCH AUTOSEL 5.4 36/37] ocfs2: quota_local: fix possible uninitialized-variable access in ocfs2_local_read_info()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 6c85c2c728193d19d6a908ae9fb312d0325e65ca ]

A memory block is allocated through kmalloc(), and its return value is
assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not
initialized but it is accessed in:
  iput(oinfo->dqi_gqinode);

To fix this possible uninitialized-variable access, assign NULL to
oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the
assignment in ocfs2_local_read_info().  Remove ocfs2_qinfo_lock_res_init()
in ocfs2_global_read_info().

Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.com
Signed-off-by: Tuo Li <islituo@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/quota_global.c | 1 -
 fs/ocfs2/quota_local.c  | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index eda83487c9ec..f033de733adb 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -357,7 +357,6 @@ int ocfs2_global_read_info(struct super_block *sb, int type)
 	}
 	oinfo->dqi_gi.dqi_sb = sb;
 	oinfo->dqi_gi.dqi_type = type;
-	ocfs2_qinfo_lock_res_init(&oinfo->dqi_gqlock, oinfo);
 	oinfo->dqi_gi.dqi_entry_size = sizeof(struct ocfs2_global_disk_dqblk);
 	oinfo->dqi_gi.dqi_ops = &ocfs2_global_ops;
 	oinfo->dqi_gqi_bh = NULL;
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index b1a8b046f4c2..0e4b16d4c037 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -702,6 +702,8 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 	info->dqi_priv = oinfo;
 	oinfo->dqi_type = type;
 	INIT_LIST_HEAD(&oinfo->dqi_chunk);
+	oinfo->dqi_gqinode = NULL;
+	ocfs2_qinfo_lock_res_init(&oinfo->dqi_gqlock, oinfo);
 	oinfo->dqi_rec = NULL;
 	oinfo->dqi_lqi_bh = NULL;
 	oinfo->dqi_libh = NULL;
-- 
2.30.2


_______________________________________________
Ocfs2-devel mailing list
Ocfs2-devel@oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-devel

[PATCH AUTOSEL 5.4 36/37] ocfs2: quota_local: fix possible uninitialized-variable access in ocfs2_local_read_info()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 6c85c2c728193d19d6a908ae9fb312d0325e65ca ]

A memory block is allocated through kmalloc(), and its return value is
assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not
initialized but it is accessed in:
  iput(oinfo->dqi_gqinode);

To fix this possible uninitialized-variable access, assign NULL to
oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the
assignment in ocfs2_local_read_info().  Remove ocfs2_qinfo_lock_res_init()
in ocfs2_global_read_info().

Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.com
Signed-off-by: Tuo Li <islituo@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/quota_global.c | 1 -
 fs/ocfs2/quota_local.c  | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index eda83487c9ec..f033de733adb 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -357,7 +357,6 @@ int ocfs2_global_read_info(struct super_block *sb, int type)
 	}
 	oinfo->dqi_gi.dqi_sb = sb;
 	oinfo->dqi_gi.dqi_type = type;
-	ocfs2_qinfo_lock_res_init(&oinfo->dqi_gqlock, oinfo);
 	oinfo->dqi_gi.dqi_entry_size = sizeof(struct ocfs2_global_disk_dqblk);
 	oinfo->dqi_gi.dqi_ops = &ocfs2_global_ops;
 	oinfo->dqi_gqi_bh = NULL;
diff --git a/fs/ocfs2/quota_local.c b/fs/ocfs2/quota_local.c
index b1a8b046f4c2..0e4b16d4c037 100644
--- a/fs/ocfs2/quota_local.c
+++ b/fs/ocfs2/quota_local.c
@@ -702,6 +702,8 @@ static int ocfs2_local_read_info(struct super_block *sb, int type)
 	info->dqi_priv = oinfo;
 	oinfo->dqi_type = type;
 	INIT_LIST_HEAD(&oinfo->dqi_chunk);
+	oinfo->dqi_gqinode = NULL;
+	ocfs2_qinfo_lock_res_init(&oinfo->dqi_gqlock, oinfo);
 	oinfo->dqi_rec = NULL;
 	oinfo->dqi_lqi_bh = NULL;
 	oinfo->dqi_libh = NULL;
-- 
2.30.2

[Ocfs2-devel] [PATCH AUTOSEL 5.4 37/37] ocfs2: ocfs2_downconvert_lock failure results in deadlock

[Sasha Levin]

From: Gang He <ghe@suse.com>

[ Upstream commit 9673e0050c39b0534d0e2ca431223f52089f4959 ]

Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to
the expected level for satisfy dlm bast requests from the other nodes.

But there is a rare situation.  When dlm lock conversion is being
canceled, ocfs2_downconvert_lock() function will return -EBUSY.  You need
to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm
implementation.

If we does not requeue this lockres entry, ocfs2 downconvert thread no
longer handles this dlm lock bast request.  Then, the other nodes will not
get the dlm lock again, the current node's process will be blocked when
acquire this dlm lock again.

Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/dlmglue.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 50a863fc1779..7b27379abe02 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -18,6 +18,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/time.h>
+#include <linux/delay.h>
 #include <linux/quotaops.h>
 #include <linux/sched/signal.h>
 
@@ -3906,6 +3907,17 @@ static int ocfs2_unblock_lock(struct ocfs2_super *osb,
 	spin_unlock_irqrestore(&lockres->l_lock, flags);
 	ret = ocfs2_downconvert_lock(osb, lockres, new_level, set_lvb,
 				     gen);
+	/* The dlm lock convert is being cancelled in background,
+	 * ocfs2_cancel_convert() is asynchronous in fs/dlm,
+	 * requeue it, try again later.
+	 */
+	if (ret == -EBUSY) {
+		ctl->requeue = 1;
+		mlog(ML_BASTS, "lockres %s, ReQ: Downconvert busy\n",
+		     lockres->l_name);
+		ret = 0;
+		msleep(20);
+	}
 
 leave:
 	if (ret)
-- 
2.30.2


_______________________________________________
Ocfs2-devel mailing list
Ocfs2-devel@oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-devel

[PATCH AUTOSEL 5.4 37/37] ocfs2: ocfs2_downconvert_lock failure results in deadlock

[Sasha Levin]

From: Gang He <ghe@suse.com>

[ Upstream commit 9673e0050c39b0534d0e2ca431223f52089f4959 ]

Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to
the expected level for satisfy dlm bast requests from the other nodes.

But there is a rare situation.  When dlm lock conversion is being
canceled, ocfs2_downconvert_lock() function will return -EBUSY.  You need
to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm
implementation.

If we does not requeue this lockres entry, ocfs2 downconvert thread no
longer handles this dlm lock bast request.  Then, the other nodes will not
get the dlm lock again, the current node's process will be blocked when
acquire this dlm lock again.

Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/dlmglue.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 50a863fc1779..7b27379abe02 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -18,6 +18,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/time.h>
+#include <linux/delay.h>
 #include <linux/quotaops.h>
 #include <linux/sched/signal.h>
 
@@ -3906,6 +3907,17 @@ static int ocfs2_unblock_lock(struct ocfs2_super *osb,
 	spin_unlock_irqrestore(&lockres->l_lock, flags);
 	ret = ocfs2_downconvert_lock(osb, lockres, new_level, set_lvb,
 				     gen);
+	/* The dlm lock convert is being cancelled in background,
+	 * ocfs2_cancel_convert() is asynchronous in fs/dlm,
+	 * requeue it, try again later.
+	 */
+	if (ret == -EBUSY) {
+		ctl->requeue = 1;
+		mlog(ML_BASTS, "lockres %s, ReQ: Downconvert busy\n",
+		     lockres->l_name);
+		ret = 0;
+		msleep(20);
+	}
 
 leave:
 	if (ret)
-- 
2.30.2