All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andreas Kemnade <andreas@kemnade.info>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: robh+dt@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>,
	soc@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	leoyang.li@nxp.com, devicetree@vger.kernel.org,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/4] ARM: dts: imx: add devicetree for Kobo Libra H2O
Date: Wed, 22 Sep 2021 22:38:47 +0200	[thread overview]
Message-ID: <20210922223847.5efe6471@aktux> (raw)
In-Reply-To: <CAJKOXPfQrfOm=LWh97tq6q16v6aGXazksYF+kYxj5ghd0x7LUg@mail.gmail.com>

Hi,

On Wed, 22 Sep 2021 09:41:39 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:

[...]
> > +       pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {  
> 
> Thanks for the patch.
> 
> This does not look like passing the schema validation. Please run
> dtbs_check. The node names should use hyphens and end with "grp"
> suffix. This remark applies to other cases below.
> 
dtbs_check reports a lot of errors originating from imx6sll.dtsi and
friends. But nothing added by me. But yes, node names should use
hyphens, that is documented. I will fix that.

But having -grp at the end for these things with a frequency in the
name is uncommon.
$ grep -R :.*100mhz arch/arm/boot/dts/imx6s*.dts
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
arch/arm/boot/dts/imx6sx-sabreauto.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhz {

Regards,
Andreas


WARNING: multiple messages have this Message-ID (diff)
From: Andreas Kemnade <andreas@kemnade.info>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: robh+dt@kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>,
	soc@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	leoyang.li@nxp.com, devicetree@vger.kernel.org,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/4] ARM: dts: imx: add devicetree for Kobo Libra H2O
Date: Wed, 22 Sep 2021 22:38:47 +0200	[thread overview]
Message-ID: <20210922223847.5efe6471@aktux> (raw)
Message-ID: <20210922203847.egQB4TpPrFT_qwfFNvQPB_UZbbM43GHjvVSjwh96xg4@z> (raw)
In-Reply-To: <CAJKOXPfQrfOm=LWh97tq6q16v6aGXazksYF+kYxj5ghd0x7LUg@mail.gmail.com>

Hi,

On Wed, 22 Sep 2021 09:41:39 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:

[...]
> > +       pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {  
> 
> Thanks for the patch.
> 
> This does not look like passing the schema validation. Please run
> dtbs_check. The node names should use hyphens and end with "grp"
> suffix. This remark applies to other cases below.
> 
dtbs_check reports a lot of errors originating from imx6sll.dtsi and
friends. But nothing added by me. But yes, node names should use
hyphens, that is documented. I will fix that.

But having -grp at the end for these things with a frequency in the
name is uncommon.
$ grep -R :.*100mhz arch/arm/boot/dts/imx6s*.dts
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-evk.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
arch/arm/boot/dts/imx6sll-evk.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-clarahd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts:	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-shine3.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc1_100mhz: usdhc1grp-100mhz {
arch/arm/boot/dts/imx6sl-tolino-vision5.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
arch/arm/boot/dts/imx6sl-warp.dts:		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
arch/arm/boot/dts/imx6sx-sabreauto.dts:	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts:	pinctrl_usdhc4_100mhz: usdhc4-100mhz {

Regards,
Andreas


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-09-22 20:38 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-18 14:16 [PATCH 0/4] ARM: dts: add E70K02 based eBook readers Andreas Kemnade
2021-09-18 14:16 ` Andreas Kemnade
2021-09-18 14:16 ` [PATCH 1/4] dt-bindings: arm: fsl: Add E70K02 based ebook readers Andreas Kemnade
2021-09-18 14:16   ` Andreas Kemnade
2021-09-22 20:51   ` Rob Herring
2021-09-22 20:51     ` Rob Herring
2021-09-18 14:16 ` [PATCH 2/4] ARM: dts: add Netronix E70K02 board common file Andreas Kemnade
2021-09-18 14:16   ` Andreas Kemnade
2021-09-18 14:16 ` [PATCH 3/4] ARM: dts: imx: add devicetree for Kobo Libra H2O Andreas Kemnade
2021-09-18 14:16   ` Andreas Kemnade
2021-09-22  7:41   ` Krzysztof Kozlowski
2021-09-22  7:41     ` Krzysztof Kozlowski
2021-09-22 20:38       ` Andreas Kemnade [this message]
2021-09-22 20:38         ` Andreas Kemnade
2021-09-23  6:26         ` Krzysztof Kozlowski
2021-09-23  6:26           ` Krzysztof Kozlowski
2021-09-23 10:54             ` Andreas Kemnade
2021-09-23 10:54               ` Andreas Kemnade
2021-09-18 14:16 ` [PATCH 4/4] ARM: dts: imx: add devicetree for Tolino Vision 5 Andreas Kemnade
2021-09-18 14:16   ` Andreas Kemnade

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210922223847.5efe6471@aktux \
    --to=andreas@kemnade.info \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.