From: tommy-huang <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600
Date: Tue, 28 Sep 2021 10:56:58 +0800 [thread overview]
Message-ID: <20210928025703.10909-2-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com>
From: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
quality = <100>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_GRAPHICS>;
+ syscon = <&syscon>;
+ status = "disabled";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: tommy-huang <tommy_huang@aspeedtech.com>
To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
<robh+dt@kernel.org>, <andrew@aj.id.au>,
<linux-aspeed@lists.ozlabs.org>,
<dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <BMC-SW@aspeedtech.com>
Subject: [PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600
Date: Tue, 28 Sep 2021 10:56:58 +0800 [thread overview]
Message-ID: <20210928025703.10909-2-tommy_huang@aspeedtech.com> (raw)
In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com>
From: Joel Stanley <joel@jms.id.au>
The GFX device is present in the AST2600 SoC.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..e38c3742761b 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -351,6 +351,17 @@
quality = <100>;
};
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2600-gfx", "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+ resets = <&syscon ASPEED_RESET_GRAPHICS>;
+ syscon = <&syscon>;
+ status = "disabled";
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
xdma: xdma@1e6e7000 {
compatible = "aspeed,ast2600-xdma";
reg = <0x1e6e7000 0x100>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-28 2:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-28 2:56 [PATCH 0/6] *** Add AST2600 GFX node *** tommy-huang
2021-09-28 2:56 ` tommy-huang
2021-09-28 2:56 ` tommy-huang [this message]
2021-09-28 2:56 ` [PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600 tommy-huang
2021-09-28 2:56 ` [PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device tommy-huang
2021-09-28 2:56 ` tommy-huang
2021-09-28 2:57 ` [PATCH 3/6] drm/aspeed: Add AST2600 support tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-09-28 2:57 ` [PATCH 4/6] HACK: drm/aspeed: INTR_STS hadndling tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-09-28 2:57 ` [PATCH 5/6] HACK: drm/aspeed: Paramterise modes tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-09-28 2:57 ` [PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document tommy-huang
2021-09-28 2:57 ` tommy-huang
2021-10-04 18:24 ` Rob Herring
2021-10-04 18:24 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210928025703.10909-2-tommy_huang@aspeedtech.com \
--to=tommy_huang@aspeedtech.com \
--cc=BMC-SW@aspeedtech.com \
--cc=airlied@linux.ie \
--cc=andrew@aj.id.au \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.