From: tommy-huang <tommy_huang@aspeedtech.com> To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>, <robh+dt@kernel.org>, <andrew@aj.id.au>, <linux-aspeed@lists.ozlabs.org>, <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Cc: <BMC-SW@aspeedtech.com> Subject: [PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device Date: Tue, 28 Sep 2021 10:56:59 +0800 [thread overview] Message-ID: <20210928025703.10909-3-tommy_huang@aspeedtech.com> (raw) In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com> From: Joel Stanley <joel@jms.id.au> Enable the GFX device with a framebuffer memory region. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com> --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index b7eb552640cb..195ccd1952da 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -23,6 +23,19 @@ reg = <0x80000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + vcc_sdhci0: regulator-vcc-sdhci0 { compatible = "regulator-fixed"; regulator-name = "SDHCI0 Vcc"; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: tommy-huang <tommy_huang@aspeedtech.com> To: <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>, <robh+dt@kernel.org>, <andrew@aj.id.au>, <linux-aspeed@lists.ozlabs.org>, <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Cc: <BMC-SW@aspeedtech.com> Subject: [PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device Date: Tue, 28 Sep 2021 10:56:59 +0800 [thread overview] Message-ID: <20210928025703.10909-3-tommy_huang@aspeedtech.com> (raw) In-Reply-To: <20210928025703.10909-1-tommy_huang@aspeedtech.com> From: Joel Stanley <joel@jms.id.au> Enable the GFX device with a framebuffer memory region. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: tommy-huang <tommy_huang@aspeedtech.com> --- arch/arm/boot/dts/aspeed-ast2600-evb.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index b7eb552640cb..195ccd1952da 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -23,6 +23,19 @@ reg = <0x80000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + vcc_sdhci0: regulator-vcc-sdhci0 { compatible = "regulator-fixed"; regulator-name = "SDHCI0 Vcc"; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-28 2:58 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-28 2:56 [PATCH 0/6] *** Add AST2600 GFX node *** tommy-huang 2021-09-28 2:56 ` tommy-huang 2021-09-28 2:56 ` [PATCH 1/6] ARM: dts: aspeed: Add GFX node to AST2600 tommy-huang 2021-09-28 2:56 ` tommy-huang 2021-09-28 2:56 ` tommy-huang [this message] 2021-09-28 2:56 ` [PATCH 2/6] ARM: dts: aspeed: ast2600-evb: Enable GFX device tommy-huang 2021-09-28 2:57 ` [PATCH 3/6] drm/aspeed: Add AST2600 support tommy-huang 2021-09-28 2:57 ` tommy-huang 2021-09-28 2:57 ` [PATCH 4/6] HACK: drm/aspeed: INTR_STS hadndling tommy-huang 2021-09-28 2:57 ` tommy-huang 2021-09-28 2:57 ` [PATCH 5/6] HACK: drm/aspeed: Paramterise modes tommy-huang 2021-09-28 2:57 ` tommy-huang 2021-09-28 2:57 ` [PATCH 6/6] dt-bindings: gpu: Add ASPEED GFX bindings document tommy-huang 2021-09-28 2:57 ` tommy-huang 2021-10-04 18:24 ` Rob Herring 2021-10-04 18:24 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210928025703.10909-3-tommy_huang@aspeedtech.com \ --to=tommy_huang@aspeedtech.com \ --cc=BMC-SW@aspeedtech.com \ --cc=airlied@linux.ie \ --cc=andrew@aj.id.au \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=joel@jms.id.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-aspeed@lists.ozlabs.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.