From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Chanwoo Choi <cw00.choi@samsung.com>, Lee Jones <lee.jones@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Sylwester Nawrocki <snawrocki@kernel.org> Subject: [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: convert to dtschema Date: Tue, 28 Sep 2021 10:49:46 +0200 [thread overview] Message-ID: <20210928084949.27939-10-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210928084949.27939-1-krzysztof.kozlowski@canonical.com> Convert the MFD part of Samsung S5M8767 PMIC to DT schema format. Previously the bindings were mostly in mfd/samsung,sec-core.txt. Since all of bindings for Samsung S2M and S5M family of PMICs were converted from mfd/samsung,sec-core.txt to respective dtschema file, remove the former one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/mfd/samsung,s5m8767.yaml | 269 ++++++++++++++++++ .../bindings/mfd/samsung,sec-core.txt | 86 ------ MAINTAINERS | 2 +- 3 files changed, 270 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 000000000000..35018346f68b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which include voltage and + current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - if: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck3-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck4-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck3-uses-gpio-dvs: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt deleted file mode 100644 index c68cdd365153..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ /dev/null @@ -1,86 +0,0 @@ -Binding for Samsung S2M and S5M family multi-function device -============================================================ - -This is a part of device tree bindings for S2M and S5M family multi-function -devices. - -The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family -of multi-function devices which include voltage and current regulators, RTC, -charger controller, clock outputs and other sub-blocks. It is interfaced -to the host controller using an I2C interface. Each sub-block is usually -addressed by the host system using different I2C slave addresses. - - -This document describes bindings for main device node. Optional sub-blocks -must be a sub-nodes to it. Bindings for them can be found in: - - bindings/regulator/samsung,s2mpa01.txt - - bindings/regulator/samsung,s2mps11.txt - - bindings/regulator/samsung,s5m8767.txt - - bindings/clock/samsung,s2mps11.txt - - -Required properties: - - compatible: Should be one of the following - - "samsung,s2mpa01-pmic", - - "samsung,s2mps11-pmic", - - "samsung,s2mps13-pmic", - - "samsung,s2mps14-pmic", - - "samsung,s2mps15-pmic", - - "samsung,s2mpu02-pmic", - - "samsung,s5m8767-pmic". - - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: - - interrupts: Interrupt specifiers for interrupt sources. - - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). - - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 2de215d1274c..39b4ef4b5a95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16601,7 +16601,7 @@ L: linux-samsung-soc@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml -F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml F: drivers/clk/clk-s2mps11.c -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Chanwoo Choi <cw00.choi@samsung.com>, Lee Jones <lee.jones@linaro.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Sylwester Nawrocki <snawrocki@kernel.org> Subject: [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: convert to dtschema Date: Tue, 28 Sep 2021 10:49:46 +0200 [thread overview] Message-ID: <20210928084949.27939-10-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210928084949.27939-1-krzysztof.kozlowski@canonical.com> Convert the MFD part of Samsung S5M8767 PMIC to DT schema format. Previously the bindings were mostly in mfd/samsung,sec-core.txt. Since all of bindings for Samsung S2M and S5M family of PMICs were converted from mfd/samsung,sec-core.txt to respective dtschema file, remove the former one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/mfd/samsung,s5m8767.yaml | 269 ++++++++++++++++++ .../bindings/mfd/samsung,sec-core.txt | 86 ------ MAINTAINERS | 2 +- 3 files changed, 270 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 000000000000..35018346f68b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which include voltage and + current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - if: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck3-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck4-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck3-uses-gpio-dvs: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt deleted file mode 100644 index c68cdd365153..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ /dev/null @@ -1,86 +0,0 @@ -Binding for Samsung S2M and S5M family multi-function device -============================================================ - -This is a part of device tree bindings for S2M and S5M family multi-function -devices. - -The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family -of multi-function devices which include voltage and current regulators, RTC, -charger controller, clock outputs and other sub-blocks. It is interfaced -to the host controller using an I2C interface. Each sub-block is usually -addressed by the host system using different I2C slave addresses. - - -This document describes bindings for main device node. Optional sub-blocks -must be a sub-nodes to it. Bindings for them can be found in: - - bindings/regulator/samsung,s2mpa01.txt - - bindings/regulator/samsung,s2mps11.txt - - bindings/regulator/samsung,s5m8767.txt - - bindings/clock/samsung,s2mps11.txt - - -Required properties: - - compatible: Should be one of the following - - "samsung,s2mpa01-pmic", - - "samsung,s2mps11-pmic", - - "samsung,s2mps13-pmic", - - "samsung,s2mps14-pmic", - - "samsung,s2mps15-pmic", - - "samsung,s2mpu02-pmic", - - "samsung,s5m8767-pmic". - - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: - - interrupts: Interrupt specifiers for interrupt sources. - - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). - - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 2de215d1274c..39b4ef4b5a95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16601,7 +16601,7 @@ L: linux-samsung-soc@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml -F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml F: drivers/clk/clk-s2mps11.c -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-28 8:50 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-28 8:49 [PATCH 00/12] regulator/mfd/clock: dt-bindings: Samsung S2M and S5M to dtschema Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 01/12] regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 02/12] regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 02/12] regulator: dt-bindings: samsung, s5m8767: correct s5m8767, pmic-buck-default-dvs-idx property Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 03/12] clock: dt-bindings: samsung,s2mps11: convert to dtschema Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 03/12] clock: dt-bindings: samsung, s2mps11: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 04/12] regulator: dt-bindings: samsung,s2m: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 04/12] regulator: dt-bindings: samsung, s2m: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 05/12] regulator: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 05/12] regulator: dt-bindings: samsung, s2mpa01: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 06/12] regulator: dt-bindings: samsung, s5m8767: " Krzysztof Kozlowski 2021-09-28 12:21 ` [PATCH 06/12] regulator: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski 2021-09-28 12:21 ` [PATCH 06/12] regulator: dt-bindings: samsung, s5m8767: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 07/12] mfd: dt-bindings: samsung,s2mps11: " Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 08/12] mfd: dt-bindings: samsung,s2mpa01: " Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski [this message] 2021-09-28 8:49 ` [PATCH 09/12] mfd: dt-bindings: samsung,s5m8767: " Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: document buck and LDO supplies Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 10/12] mfd: dt-bindings: samsung, s5m8767: " Krzysztof Kozlowski 2021-09-30 12:47 ` [PATCH 10/12] mfd: dt-bindings: samsung,s5m8767: " Lee Jones 2021-09-30 12:47 ` Lee Jones 2021-09-30 13:16 ` Krzysztof Kozlowski 2021-09-30 13:16 ` Krzysztof Kozlowski 2021-09-30 13:21 ` Lee Jones 2021-09-30 13:21 ` Lee Jones 2021-09-28 8:49 ` [PATCH 11/12] ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-30 11:47 ` (subset) " Krzysztof Kozlowski 2021-09-30 11:47 ` Krzysztof Kozlowski 2021-09-28 8:49 ` [PATCH 12/12] ARM: dts: exynos: use spaces instead of tabs around '=' Krzysztof Kozlowski 2021-09-28 8:49 ` Krzysztof Kozlowski 2021-09-30 11:47 ` (subset) " Krzysztof Kozlowski 2021-09-30 11:47 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210928084949.27939-10-krzysztof.kozlowski@canonical.com \ --to=krzysztof.kozlowski@canonical.com \ --cc=b.zolnierkie@samsung.com \ --cc=broonie@kernel.org \ --cc=cw00.choi@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=lee.jones@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@kernel.org \ --cc=snawrocki@kernel.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.