From: Florian Fainelli <f.fainelli@gmail.com> To: linux-kernel@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Russell King <linux@armlinux.org.uk>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com>, linux-arm-kernel@lists.infradead.org (moderated list:ARM SUB-ARCHITECTURES), linux-mips@vger.kernel.org (open list:MIPS), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE) Subject: [PATCH v3 11/14] irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER Date: Tue, 28 Sep 2021 11:21:36 -0700 [thread overview] Message-ID: <20210928182139.652896-12-f.fainelli@gmail.com> (raw) In-Reply-To: <20210928182139.652896-1-f.fainelli@gmail.com> Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. To avoid using of_irq_count() which is not exported towards module, switch the driver to use the platform_device provided by the irqchip platform driver code and resolve the number of interrupts using platform_irq_count(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/irqchip/Kconfig | 4 +++- drivers/irqchip/irq-bcm7120-l2.c | 28 ++++++++++++++++------------ 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index dfe54bf9b35f..c7320bed5668 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -123,7 +123,9 @@ config BCM7038_L1_IRQ select GENERIC_IRQ_EFFECTIVE_AFF_MASK config BCM7120_L2_IRQ - bool + tristate "Broadcom STB 7120-style L2 interrupt controller driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c index f23d7651ea84..9b1edf7747fd 100644 --- a/drivers/irqchip/irq-bcm7120-l2.c +++ b/drivers/irqchip/irq-bcm7120-l2.c @@ -214,6 +214,7 @@ static int __init bcm7120_l2_intc_iomap_3380(struct device_node *dn, static int __init bcm7120_l2_intc_probe(struct device_node *dn, struct device_node *parent, + struct platform_device *pdev, int (*iomap_regs_fn)(struct device_node *, struct bcm7120_l2_intc_data *), const char *intc_name) @@ -230,7 +231,7 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, if (!data) return -ENOMEM; - data->num_parent_irqs = of_irq_count(dn); + data->num_parent_irqs = platform_irq_count(pdev); if (data->num_parent_irqs <= 0) { pr_err("invalid number of parent interrupts\n"); ret = -ENOMEM; @@ -334,21 +335,24 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, } static int __init bcm7120_l2_intc_probe_7120(struct device_node *dn, - struct device_node *parent) + struct device_node *parent, + struct platform_device *pdev) { - return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_7120, - "BCM7120 L2"); + return bcm7120_l2_intc_probe(dn, parent, pdev, + bcm7120_l2_intc_iomap_7120, "BCM7120 L2"); } static int __init bcm7120_l2_intc_probe_3380(struct device_node *dn, - struct device_node *parent) + struct device_node *parent, + struct platform_device *pdev) { - return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_3380, - "BCM3380 L2"); + return bcm7120_l2_intc_probe(dn, parent, pdev, + bcm7120_l2_intc_iomap_3380, "BCM3380 L2"); } -IRQCHIP_DECLARE(bcm7120_l2_intc, "brcm,bcm7120-l2-intc", - bcm7120_l2_intc_probe_7120); - -IRQCHIP_DECLARE(bcm3380_l2_intc, "brcm,bcm3380-l2-intc", - bcm7120_l2_intc_probe_3380); +IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7120_l2) +IRQCHIP_MATCH("brcm,bcm7120-l2-intc", bcm7120_l2_intc_probe_7120) +IRQCHIP_MATCH("brcm,bcm3380-l2-intc", bcm7120_l2_intc_probe_3380) +IRQCHIP_PLATFORM_DRIVER_END(bcm7120_l2) +MODULE_DESCRIPTION("Broadcom STB 7120-style L2 interrupt controller driver"); +MODULE_LICENSE("GPL v2"); -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com> To: linux-kernel@vger.kernel.org Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Russell King <linux@armlinux.org.uk>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com>, linux-arm-kernel@lists.infradead.org (moderated list:ARM SUB-ARCHITECTURES), linux-mips@vger.kernel.org (open list:MIPS), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE) Subject: [PATCH v3 11/14] irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER Date: Tue, 28 Sep 2021 11:21:36 -0700 [thread overview] Message-ID: <20210928182139.652896-12-f.fainelli@gmail.com> (raw) In-Reply-To: <20210928182139.652896-1-f.fainelli@gmail.com> Allow the user selection and building of this interrupt controller driver as a module since it is used on ARM/ARM64 based systems as a second level interrupt controller hanging off the ARM GIC and is therefore loadable during boot. To avoid using of_irq_count() which is not exported towards module, switch the driver to use the platform_device provided by the irqchip platform driver code and resolve the number of interrupts using platform_irq_count(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/irqchip/Kconfig | 4 +++- drivers/irqchip/irq-bcm7120-l2.c | 28 ++++++++++++++++------------ 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index dfe54bf9b35f..c7320bed5668 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -123,7 +123,9 @@ config BCM7038_L1_IRQ select GENERIC_IRQ_EFFECTIVE_AFF_MASK config BCM7120_L2_IRQ - bool + tristate "Broadcom STB 7120-style L2 interrupt controller driver" + depends on ARCH_BRCMSTB || BMIPS_GENERIC + default ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c index f23d7651ea84..9b1edf7747fd 100644 --- a/drivers/irqchip/irq-bcm7120-l2.c +++ b/drivers/irqchip/irq-bcm7120-l2.c @@ -214,6 +214,7 @@ static int __init bcm7120_l2_intc_iomap_3380(struct device_node *dn, static int __init bcm7120_l2_intc_probe(struct device_node *dn, struct device_node *parent, + struct platform_device *pdev, int (*iomap_regs_fn)(struct device_node *, struct bcm7120_l2_intc_data *), const char *intc_name) @@ -230,7 +231,7 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, if (!data) return -ENOMEM; - data->num_parent_irqs = of_irq_count(dn); + data->num_parent_irqs = platform_irq_count(pdev); if (data->num_parent_irqs <= 0) { pr_err("invalid number of parent interrupts\n"); ret = -ENOMEM; @@ -334,21 +335,24 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn, } static int __init bcm7120_l2_intc_probe_7120(struct device_node *dn, - struct device_node *parent) + struct device_node *parent, + struct platform_device *pdev) { - return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_7120, - "BCM7120 L2"); + return bcm7120_l2_intc_probe(dn, parent, pdev, + bcm7120_l2_intc_iomap_7120, "BCM7120 L2"); } static int __init bcm7120_l2_intc_probe_3380(struct device_node *dn, - struct device_node *parent) + struct device_node *parent, + struct platform_device *pdev) { - return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_3380, - "BCM3380 L2"); + return bcm7120_l2_intc_probe(dn, parent, pdev, + bcm7120_l2_intc_iomap_3380, "BCM3380 L2"); } -IRQCHIP_DECLARE(bcm7120_l2_intc, "brcm,bcm7120-l2-intc", - bcm7120_l2_intc_probe_7120); - -IRQCHIP_DECLARE(bcm3380_l2_intc, "brcm,bcm3380-l2-intc", - bcm7120_l2_intc_probe_3380); +IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7120_l2) +IRQCHIP_MATCH("brcm,bcm7120-l2-intc", bcm7120_l2_intc_probe_7120) +IRQCHIP_MATCH("brcm,bcm3380-l2-intc", bcm7120_l2_intc_probe_3380) +IRQCHIP_PLATFORM_DRIVER_END(bcm7120_l2) +MODULE_DESCRIPTION("Broadcom STB 7120-style L2 interrupt controller driver"); +MODULE_LICENSE("GPL v2"); -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-28 18:23 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-28 18:21 [PATCH v3 00/14] Modular Broadcom irqchip drivers Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 01/14] MIPS: BMIPS: Remove use of irq_cpu_offline Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-10-03 16:09 ` Thomas Bogendoerfer 2021-10-03 16:09 ` Thomas Bogendoerfer 2021-09-28 18:21 ` [PATCH v3 02/14] irqchip/irq-bcm7038-l1: Remove .irq_cpu_offline() Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 03/14] irqchip/irq-bcm7038-l1: Use irq_get_irq_data() Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 04/14] irqchip/irq-bcm7038-l1: Gate use of CPU logical map to MIPS Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 05/14] irqchip/irq-bcm7038-l1: Restrict affinity setting " Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 06/14] irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 07/14] genirq: Export irq_gc_{unmask_enable,mask_disable}_reg Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 07/14] genirq: Export irq_gc_{unmask_enable, mask_disable}_reg Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 08/14] irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 09/14] irqchip: Provide platform_device to of_irq_init_cb_t Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 19:36 ` Rob Herring 2021-09-28 19:36 ` Rob Herring 2021-09-28 18:21 ` [PATCH v3 10/14] genirq: Export irq_gc_noop() Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli [this message] 2021-09-28 18:21 ` [PATCH v3 11/14] irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 12/14] arm64: broadcom: Removed forced select of interrupt controllers Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 13/14] ARM: bcm: " Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:21 ` [PATCH v3 14/14] irqchip: Fix kernel-doc parameter typo for IRQCHIP_DECLARE Florian Fainelli 2021-09-28 18:21 ` Florian Fainelli 2021-09-28 18:41 ` Sergey Shtylyov 2021-09-28 18:41 ` Sergey Shtylyov 2021-10-04 17:03 ` [PATCH v3 00/14] Modular Broadcom irqchip drivers Florian Fainelli 2021-10-04 17:03 ` Florian Fainelli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210928182139.652896-12-f.fainelli@gmail.com \ --to=f.fainelli@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=frowand.list@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=maz@kernel.org \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ --cc=tglx@linutronix.de \ --cc=tsbogend@alpha.franken.de \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.